== Device Tree ==
* Review and test mx51 dt patch v2 from Jason
* Sent out the preview version of patch set 'dynamically adding clk per dt nodes'
== Misc ==
* Test l-m-c and report issues
--
Regards,
Shawn
Out of town Monday, then out sick most of Thursday and Friday, so not a
whole lot got done.
== Posix Alarm Timers ==
* CLOCK_BOOTTIME patches were merged into -tip by tglx for 2.6.39
* LWN Article on alarm timers was published:
https://lwn.net/Articles/429925/
* Got some good discussion in the comments going.
== Config Work ==
* Created First pass Kconfig fragments for imx51, vexpress and omap3, as
well as a distro Kconfig.
* Working to minimize the difference between the kconfig fragments and
the current Linaro config files.
== Linaro Android Kernel ==
* Synced with Jesse about shipping a Panda board to me for testing with
the Android kernel. Should be on its way.
== Linaro Misc ==
* Attended linaro technical resources kick-off meeting.
== m-y ==
=== Highlights ===
* USB works out of the box in PIO mode on U8500 since v2.6.38-rc3
* Work on DMA support is in progress.
=== Plans ===
* Continue testing/debugging DMA for USB on U8500
* Investigate bug # 709245
Thanks,
--
Mian Yousaf Kaukab
== Kernel development ==
* (hopefully) last round of BKL removal patches
* bug hunting: macvtap, omap-serial, lo
* code review: SPEAr13xx PCIe, slack timers
== Flash devices ==
* Helped out a few flashbench users
* Measured various USB flash device
* Started discussions with a PHD student who wants to
write a new flash file system
== Dave Martin <dmart> ==
=== Activity ===
==== hardware-n-kernel-standard-architecture ====
* Still waiting for acks/tested-bys on one of the omap3/4
Thumb-2 compatiblity patches. Reposted for feedback.
* Some upstream discussion regarding some gas problems with
pc-relative instructions. Currently, no upstream fix is
imminent, and it looks unwise to expect one quickly.
* Pushing a workaround patch for adr to alkml, but Russell is
currently unhappy with it (somewhat understandably).
==== miscellaneous ====
* Spent a day or so trying to get some u8500 boards up and
running in the validation lab. It looks like we will need
to reflash U-Boot on both boards -- I have the necessary
resources from the ST-E guys; will try next week.
* linux-linaro-2.6.38 now dies during boot with an imprecise
external abort -- maybe related to
https://bugs.launchpad.net/linux-linaro/+bug/720055
=== Plans ===
* Try and reflash U-Boot on the validation lab u8500 boards
* Set up Freescale boards in validation lab.
* Write up the output from the Freescale i.MX BSP review
discussion, and post for comment.
=== Issues ===
* (none)
=== Absences ===
* Mon 2011-03-14 -- Fri 2011-03-16
Hi,
Just tested the imx51 Thumb-2 kernel on efikamx here -- it boots fine,
but we only went as far as the initramfs.
Is anyone currently relying on CONFIG_LATENCYTOP? If so, we should
investigate what the incompatibility is...
Cheers
---Dave
On Wed, Feb 23, 2011 at 6:11 PM, Dave Martin <dave.martin(a)linaro.org> wrote:
> Hi there,
>
> Talking with Loic just now, we thought it could be worth turning on
> Thumb-2 in the main omap kernel package after all, since we've at
> least seen it work on a few different boards now. It feels ready for
> wider testing.
>
> Is it possible for you to move to a newer snapshot of the 2.6.38
> linaro tree, or will that be problematic at this stage?
>
>
> Since the imx51 kernel at least seems to build and boot in Thumb, it
> could be worth enabling a separate build in a PPA, but it's may not
> mature enough for everyone to use as the main kernel just yet. If you
> want to try this, you need CONFIG_ARM_UNWIND=y, CONFIG_LATENCYTOP=n
> and CONFIG_THUMB2_KERNEL=y
>
> Cheers
> ---Dave
>