linaro-kernel April 2013

linaro-kernel@lists.linaro.org

91 participants
94 discussions

[RFC patch 0/2] ARM: at91: cpuidle: move driver to drivers/cpuidle

by Daniel Lezcano

The number of cpuidle drivers is increasing more and more. Today we have in total 24 drivers. A lot of the code is duplicated, at least for the initialization. A work of consolidation has been done during this year: * a lot of code cleanup in all the drivers * time keeping is now part of the framework * timer broadcast is now part of the framework * a WFI state function for ARM is defined and used in the drivers * an init function has been proposed to factor out the initialization across the drivers (patchset pending) What has been observed is a lot of code duplicationis, modification made in the framework takes awhile before reaching the driver which uses an old API, duplicate routine and bugs, etc ... It appears the drivers are belonging to different trees, the cpuidle framework is under linux-pm, the drivers are per SoC tree. The communication is made difficult because of the different mailing lists where the cpuidle are submitted. After this work, it is time to prevent all these problems to occur again. I propose to move the cpuidle drivers to the drivers/cpuidle directory, hence having one single submission path for cpuidle in order to have the cpuidle framework and the different drivers synced. This series move the AT91 cpuidle driver under drivers/cpuidle. That does not change the rule to have the patches acked-by the author of the driver. Note the calxeda and kirkwood drivers are now in drivers/cpuidle. Daniel Lezcano (2): ARM: at91: cpuidle: encapsulate the standby code ARM: at91: cpuidle: move the driver to drivers/cpuidle directory arch/arm/mach-at91/Makefile | 1 - arch/arm/mach-at91/cpuidle.c | 66 ------------------------------------------ arch/arm/mach-at91/pm.c | 8 ++++- drivers/cpuidle/Makefile | 1 + drivers/cpuidle/at91.c | 55 +++++++++++++++++++++++++++++++++++ 5 files changed, 63 insertions(+), 68 deletions(-) delete mode 100644 arch/arm/mach-at91/cpuidle.c create mode 100644 drivers/cpuidle/at91.c -- 1.7.9.5

10 years, 10 months

[PATCH 00/18] For-3.10: CPUFreq: Move drivers to drivers/cpufreq

by Viresh Kumar

Hi Rafael, These are all the remaining patches i have for 3.10. All of them have received Acks from their maintainers leaving powerpc ones. I have got an additional patch for powerpc (18) this time, it was the only driver left out of drivers/cpufreq. Please consider them for applying to your bleeding-edge or linux-next. -------------x--------------x------------- This patchset targets towards moving all platform specific cpufreq drivers to drivers/cpufreq. This will lead to better consolidation code in future too. All ARM and powerpc patches are compile tested by me. Changes since earlier version: - Additional patch 18/18 Viresh Kumar (18): cpufreq: ARM: Arrange drivers in alphabetical order cpufreq: tegra: Move driver to drivers/cpufreq cpufreq: davinci: move cpufreq driver to drivers/cpufreq cpufreq: pxa3xx: move cpufreq driver to drivers/cpufreq cpufreq: pxa2xx: move cpufreq driver to drivers/cpufreq cpufreq: integrator: move cpufreq driver to drivers/cpufreq cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq cpufreq: sa11x0: move cpufreq driver to drivers/cpufreq cpufreq: AVR32: move cpufreq driver to drivers/cpufreq cpufreq: blackfin: move cpufreq driver to drivers/cpufreq cpufreq: cris: move cpufreq driver to drivers/cpufreq cpufreq: ia64: move cpufreq driver to drivers/cpufreq cpufreq: mips: move cpufreq driver to drivers/cpufreq cpufreq: sh: move cpufreq driver to drivers/cpufreq cpufreq: unicore2: move cpufreq driver to drivers/cpufreq cpufreq: sparc: move cpufreq driver to drivers/cpufreq cpufreq: powerpc: move cpufreq driver to drivers/cpufreq cpufreq: powerpc/platforms/cell: move cpufreq driver to drivers/cpufreq arch/arm/Kconfig | 72 -------- arch/arm/mach-davinci/Makefile | 1 - arch/arm/mach-integrator/Makefile | 1 - arch/arm/mach-pxa/Makefile | 6 - arch/arm/mach-pxa/include/mach/generic.h | 1 + arch/arm/mach-s3c24xx/Kconfig | 66 +++----- arch/arm/mach-s3c24xx/Makefile | 6 - arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h | 0 arch/arm/mach-s3c24xx/iotiming-s3c2412.c | 2 +- arch/arm/mach-sa1100/Kconfig | 26 +-- arch/arm/mach-sa1100/Makefile | 3 - arch/arm/mach-sa1100/include/mach/generic.h | 1 + arch/arm/mach-tegra/Makefile | 1 - arch/arm/plat-samsung/include/plat/cpu-freq-core.h | 10 +- arch/arm/plat-samsung/include/plat/cpu-freq.h | 6 +- arch/avr32/Kconfig | 13 -- arch/avr32/configs/atngw100_defconfig | 2 +- arch/avr32/configs/atngw100_evklcd100_defconfig | 2 +- arch/avr32/configs/atngw100_evklcd101_defconfig | 2 +- arch/avr32/configs/atngw100_mrmt_defconfig | 2 +- arch/avr32/configs/atngw100mkii_defconfig | 2 +- .../avr32/configs/atngw100mkii_evklcd100_defconfig | 2 +- .../avr32/configs/atngw100mkii_evklcd101_defconfig | 2 +- arch/avr32/configs/atstk1002_defconfig | 2 +- arch/avr32/configs/atstk1003_defconfig | 2 +- arch/avr32/configs/atstk1004_defconfig | 2 +- arch/avr32/configs/atstk1006_defconfig | 2 +- arch/avr32/configs/favr-32_defconfig | 2 +- arch/avr32/configs/hammerhead_defconfig | 2 +- arch/avr32/configs/mimc200_defconfig | 2 +- arch/avr32/mach-at32ap/Makefile | 1 - arch/blackfin/mach-common/Makefile | 1 - arch/cris/arch-v32/mach-a3/Makefile | 1 - arch/cris/arch-v32/mach-fs/Makefile | 1 - arch/ia64/Kconfig | 6 +- arch/ia64/kernel/Makefile | 1 - arch/ia64/kernel/cpufreq/Kconfig | 29 ---- arch/ia64/kernel/cpufreq/Makefile | 2 - arch/mips/Kconfig | 9 +- arch/mips/kernel/Makefile | 2 - arch/mips/kernel/cpufreq/Kconfig | 41 ----- arch/mips/kernel/cpufreq/Makefile | 5 - arch/powerpc/platforms/Kconfig | 31 ---- arch/powerpc/platforms/cell/Kconfig | 26 +-- arch/powerpc/platforms/cell/Makefile | 3 - arch/powerpc/platforms/pasemi/Makefile | 1 - arch/powerpc/platforms/powermac/Makefile | 2 - arch/sh/Kconfig | 18 -- arch/sh/kernel/Makefile | 1 - arch/sparc/Kconfig | 23 --- arch/sparc/kernel/Makefile | 3 - arch/unicore32/kernel/Makefile | 1 - drivers/cpufreq/Kconfig | 89 ++++++++++ drivers/cpufreq/Kconfig.arm | 184 ++++++++++++++------- drivers/cpufreq/Kconfig.powerpc | 44 +++++ drivers/cpufreq/Makefile | 42 ++++- .../cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c | 0 .../cpufreq/blackfin-cpufreq.c | 0 .../cpufreq/cris-artpec3-cpufreq.c | 0 .../cpufreq/cris-etraxfs-cpufreq.c | 0 .../cpufreq.c => drivers/cpufreq/davinci-cpufreq.c | 2 - .../cpufreq/ia64-acpi-cpufreq.c | 1 - .../cpu.c => drivers/cpufreq/integrator-cpufreq.c | 2 - .../kernel => drivers}/cpufreq/loongson2_cpufreq.c | 0 .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c | 0 .../cpufreq/pmac32-cpufreq.c | 0 .../cpufreq/pmac64-cpufreq.c | 0 .../cpufreq/ppc_cbe_cpufreq.c | 2 +- .../cpufreq/ppc_cbe_cpufreq_pervasive.c | 3 +- .../cpufreq/ppc_cbe_cpufreq_pmi.c | 3 +- .../cpufreq/pxa2xx-cpufreq.c | 2 - .../cpufreq/pxa3xx-cpufreq.c | 5 +- .../cpufreq/s3c2410-cpufreq.c | 0 .../cpufreq/s3c2412-cpufreq.c | 3 +- .../cpufreq/s3c2440-cpufreq.c | 0 .../cpufreq/s3c24xx-cpufreq-debugfs.c | 0 .../cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c | 0 .../cpufreq/sa1100-cpufreq.c | 3 +- .../cpufreq/sa1110-cpufreq.c | 3 +- .../cpufreq.c => drivers/cpufreq/sh-cpufreq.c | 2 - .../cpufreq/sparc-us2e-cpufreq.c | 0 .../cpufreq/sparc-us3-cpufreq.c | 0 .../cpu-tegra.c => drivers/cpufreq/tegra-cpufreq.c | 2 - .../cpufreq/unicore2-cpufreq.c | 2 +- .../linux/ppc_cbe_cpufreq.h | 4 +- 85 files changed, 385 insertions(+), 464 deletions(-) create mode 100644 arch/arm/mach-pxa/include/mach/generic.h rename arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h (100%) create mode 100644 arch/arm/mach-sa1100/include/mach/generic.h delete mode 100644 arch/ia64/kernel/cpufreq/Kconfig delete mode 100644 arch/ia64/kernel/cpufreq/Makefile delete mode 100644 arch/mips/kernel/cpufreq/Kconfig delete mode 100644 arch/mips/kernel/cpufreq/Makefile rename arch/avr32/mach-at32ap/cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c (100%) rename arch/blackfin/mach-common/cpufreq.c => drivers/cpufreq/blackfin-cpufreq.c (100%) rename arch/cris/arch-v32/mach-a3/cpufreq.c => drivers/cpufreq/cris-artpec3-cpufreq.c (100%) rename arch/cris/arch-v32/mach-fs/cpufreq.c => drivers/cpufreq/cris-etraxfs-cpufreq.c (100%) rename arch/arm/mach-davinci/cpufreq.c => drivers/cpufreq/davinci-cpufreq.c (99%) rename arch/ia64/kernel/cpufreq/acpi-cpufreq.c => drivers/cpufreq/ia64-acpi-cpufreq.c (99%) rename arch/arm/mach-integrator/cpu.c => drivers/cpufreq/integrator-cpufreq.c (99%) rename {arch/mips/kernel => drivers}/cpufreq/loongson2_cpufreq.c (100%) rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%) rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%) rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%) rename arch/powerpc/platforms/cell/cbe_cpufreq.c => drivers/cpufreq/ppc_cbe_cpufreq.c (99%) rename arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c => drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c (98%) rename arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c => drivers/cpufreq/ppc_cbe_cpufreq_pmi.c (99%) rename arch/arm/mach-pxa/cpufreq-pxa2xx.c => drivers/cpufreq/pxa2xx-cpufreq.c (99%) rename arch/arm/mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c (98%) rename arch/arm/mach-s3c24xx/cpufreq-s3c2410.c => drivers/cpufreq/s3c2410-cpufreq.c (100%) rename arch/arm/mach-s3c24xx/cpufreq-s3c2412.c => drivers/cpufreq/s3c2412-cpufreq.c (99%) rename arch/arm/mach-s3c24xx/cpufreq-s3c2440.c => drivers/cpufreq/s3c2440-cpufreq.c (100%) rename arch/arm/mach-s3c24xx/cpufreq-debugfs.c => drivers/cpufreq/s3c24xx-cpufreq-debugfs.c (100%) rename arch/arm/mach-s3c24xx/cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c (100%) rename arch/arm/mach-sa1100/cpu-sa1100.c => drivers/cpufreq/sa1100-cpufreq.c (99%) rename arch/arm/mach-sa1100/cpu-sa1110.c => drivers/cpufreq/sa1110-cpufreq.c (99%) rename arch/sh/kernel/cpufreq.c => drivers/cpufreq/sh-cpufreq.c (99%) rename arch/sparc/kernel/us2e_cpufreq.c => drivers/cpufreq/sparc-us2e-cpufreq.c (100%) rename arch/sparc/kernel/us3_cpufreq.c => drivers/cpufreq/sparc-us3-cpufreq.c (100%) rename arch/arm/mach-tegra/cpu-tegra.c => drivers/cpufreq/tegra-cpufreq.c (99%) rename arch/unicore32/kernel/cpu-ucv2.c => drivers/cpufreq/unicore2-cpufreq.c (96%) rename arch/powerpc/platforms/cell/cbe_cpufreq.h => include/linux/ppc_cbe_cpufreq.h (82%) -- 1.7.12.rc2.18.g61b472e

10 years, 10 months

[PATCH] arm64: compiling issue, need add include/asm/vga.h file

by Chen Gang

For compiling with allmodconfig, need vga.h file, so copy it from arm32. The related information: aarch64-linux-gnu-gcc -Wp,-MD,drivers/gpu/drm/.drm_irq.o.d -nostdinc -isystem /usr/bin/../lib/gcc/aarch64-linux-gnu/4.7.3/include -I/root/linux-next/arch/arm64/include -Iarch/arm64/include/generated -Iinclude -I/root/linux-next/arch/arm64/include/uapi -Iarch/arm64/include/generated/uapi -I/root/linux-next/include/uapi -Iinclude/generated/uapi -include /root/linux-next/include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-delete-null-pointer-checks -Os -mgeneral-regs-only -fno-reorder-blocks -fno-ipa-cp-clone -fno-partial-inlining -Wframe-larger-than=2048 -fno-stack-protector -Wno-unused-but-set-variable -fno-omit-frame-pointer -fno-optimize-sibling-calls -g -femit-struct-debug-baseonly -fno-var-tracking -fno-inline-functions-called-once -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -DCC_HAV E_ASM_GOT O -Iinclude/drm -W -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(drm_irq)" -D"KBUILD_MODNAME=KBUILD_STR(drm)" -c -o drivers/gpu/drm/.tmp_drm_irq.o drivers/gpu/drm/drm_irq.c The related error: include/video/vga.h: At top level: include/video/vga.h:22:21: fatal error: asm/vga.h: No such file or directory compilation terminated. make[3]: *** [drivers/gpu/drm/drm_irq.o] Error 1 make[2]: *** [drivers/gpu/drm] Error 2 make[1]: *** [drivers/gpu] Error 2 make: *** [drivers] Error 2 Signed-off-by: root <root(a)dhcp122.asianux.net> --- arch/arm64/include/asm/vga.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 arch/arm64/include/asm/vga.h diff --git a/arch/arm64/include/asm/vga.h b/arch/arm64/include/asm/vga.h new file mode 100644 index 0000000..91f4021 --- /dev/null +++ b/arch/arm64/include/asm/vga.h @@ -0,0 +1,13 @@ +#ifndef ASMARM_VGA_H +#define ASMARM_VGA_H + +#include <linux/io.h> + +extern unsigned long vga_base; + +#define VGA_MAP_MEM(x,s) (vga_base + (x)) + +#define vga_readb(x) (*((volatile unsigned char *)x)) +#define vga_writeb(x,y) (*((volatile unsigned char *)y) = (x)) + +#endif -- 1.7.11.7

10 years, 11 months

[RFC PATCH v4 00/14] sched: packing small tasks

by Vincent Guittot

Hi, This patchset takes advantage of the new per-task load tracking that is available in the kernel for packing the tasks in as few as possible CPU/Cluster/Core. It has got 2 packing modes: -The 1st mode packs the small tasks when the system is not too busy. The main goal is to reduce the power consumption in the low system load use cases by minimizing the number of power domain that are enabled but it also keeps the default behavior which is performance oriented. -The 2nd mode packs all tasks in as few as possible power domains in order to improve the power consumption of the system but at the cost of possible performance decrease because of the increase of the rate of ressources sharing compared to the default mode. The packing is done in 3 steps (the last step is only applicable for the agressive packing mode): The 1st step looks for the best place to pack tasks in a system according to its topology and it defines a 1st pack buddy CPU for each CPU if there is one available. The policy for defining a buddy CPU is that we want to pack at levels where a group of CPU can be power gated independently from others. To describe this capability, a new flag SD_SHARE_POWERDOMAIN has been introduced, that is used to indicate whether the groups of CPUs of a scheduling domain share their power state. By default, this flag is set in all sched_domain in order to keep unchanged the current behavior of the scheduler and only ARM platform clears the SD_SHARE_POWERDOMAIN flag for MC and CPU level. In a 2nd step, the scheduler checks the load average of a task which wakes up as well as the load average of the buddy CPU and it can decide to migrate the light tasks on a not busy buddy. This check is done during the wake up because small tasks tend to wake up between periodic load balance and asynchronously to each other which prevents the default mechanism to catch and migrate them efficiently. A light task is defined by a runnable_avg_sum that is less than 20% of the runnable_avg_period. In fact, the former condition encloses 2 ones: The average CPU load of the task must be less than 20% and the task must have been runnable less than 10ms when it woke up last time in order to be electable for the packing migration. So, a task than runs 1 ms each 5ms will be considered as a small task but a task that runs 50 ms with a period of 500ms, will not. Then, the business of the buddy CPU depends of the load average for the rq and the number of running tasks. A CPU with a load average greater than 50% will be considered as busy CPU whatever the number of running tasks is and this threshold will be reduced by the number of running tasks in order to not increase too much the wake up latency of a task. When the buddy CPU is busy, the scheduler falls back to default CFS policy. The 3rd step is only used when the agressive packing mode is enable. In this case, the CPUs pack their tasks in their buddy until they becomes full. Unlike the previous step, we can't keep the same buddy so we update it during load balance. During the periodic load balance, the scheduler computes the activity of the system thanks the runnable_avg_sum and the cpu_power of all CPUs and then it defines the CPUs that will be used to handle the current activity. The selected CPUs will be their own buddy and will participate to the default load balancing mecanism in order to share the tasks in a fair way, whereas the not selected CPUs will not, and their buddy will be the last selected CPU. The behavior can be summarized as: The scheduler defines how many CPUs are required to handle the current activity, keeps the tasks on these CPUS and perform normal load balancing (or any evolution of the current load balancer like the use of runnable load avg from Alex https://lkml.org/lkml/2013/4/1/580) on this limited number of CPUs . Like the other steps, the CPUs are selected to minimize the number of power domain that must stay on. Change since V3: - Take into account comments on previous version. - Add an agressive packing mode and a knob to select between the various mode Change since V2: - Migrate only a task that wakes up - Change the light tasks threshold to 20% - Change the loaded CPU threshold to not pull tasks if the current number of running tasks is null but the load average is already greater than 50% - Fix the algorithm for selecting the buddy CPU. Change since V1: Patch 2/6 - Change the flag name which was not clear. The new name is SD_SHARE_POWERDOMAIN. - Create an architecture dependent function to tune the sched_domain flags Patch 3/6 - Fix issues in the algorithm that looks for the best buddy CPU - Use pr_debug instead of pr_info - Fix for uniprocessor Patch 4/6 - Remove the use of usage_avg_sum which has not been merged Patch 5/6 - Change the way the coherency of runnable_avg_sum and runnable_avg_period is ensured Patch 6/6 - Use the arch dependent function to set/clear SD_SHARE_POWERDOMAIN for ARM platform Previous results for v3: This series has been tested with hackbench on ARM platform and the results don't show any performance regression Hackbench 3.9-rc2 +patches Mean Time (10 tests): 2.048 2.015 stdev : 0.047 0.068 Previous results for V2: This series has been tested with MP3 play back on ARM platform: TC2 HMP (dual CA-15 and 3xCA-7 cluster). The measurements have been done on an Ubuntu image during 60 seconds of playback and the result has been normalized to 100. | CA15 | CA7 | total | ------------------------------------- default | 81 | 97 | 178 | pack | 13 | 100 | 113 | ------------------------------------- Previous results for V1: The patch-set has been tested on ARM platforms: quad CA-9 SMP and TC2 HMP (dual CA-15 and 3xCA-7 cluster). For ARM platform, the results have demonstrated that it's worth packing small tasks at all topology levels. The performance tests have been done on both platforms with sysbench. The results don't show any performance regressions. These results are aligned with the policy which uses the normal behavior with heavy use cases. test: sysbench --test=cpu --num-threads=N --max-requests=R run Results below is the average duration of 3 tests on the quad CA-9. default is the current scheduler behavior (pack buddy CPU is -1) pack is the scheduler with the pack mechanism | default | pack | ----------------------------------- N=8; R=200 | 3.1999 | 3.1921 | N=8; R=2000 | 31.4939 | 31.4844 | N=12; R=200 | 3.2043 | 3.2084 | N=12; R=2000 | 31.4897 | 31.4831 | N=16; R=200 | 3.1774 | 3.1824 | N=16; R=2000 | 31.4899 | 31.4897 | ----------------------------------- The power consumption tests have been done only on TC2 platform which has got accessible power lines and I have used cyclictest to simulate small tasks. The tests show some power consumption improvements. test: cyclictest -t 8 -q -e 1000000 -D 20 & cyclictest -t 8 -q -e 1000000 -D 20 The measurements have been done during 16 seconds and the result has been normalized to 100 | CA15 | CA7 | total | ------------------------------------- default | 100 | 40 | 140 | pack | <1 | 45 | <46 | ------------------------------------- The A15 cluster is less power efficient than the A7 cluster but if we assume that the tasks is well spread on both clusters, we can guest estimate that the power consumption on a dual cluster of CA7 would have been for a default kernel: | CA7 | CA7 | total | ------------------------------------- default | 40 | 40 | 80 | ------------------------------------- Vincent Guittot (14): Revert "sched: Introduce temporary FAIR_GROUP_SCHED dependency for load-tracking" sched: add a new SD_SHARE_POWERDOMAIN flag for sched_domain sched: pack small tasks sched: pack the idle load balance ARM: sched: clear SD_SHARE_POWERDOMAIN sched: add a knob to choose the packing level sched: agressively pack at wake/fork/exec sched: trig ILB on an idle buddy sched: evaluate the activity level of the system sched: update the buddy CPU sched: filter task pull request sched: create a new field with available capacity sched: update the cpu_power sched: force migration on buddy CPU arch/arm/kernel/topology.c | 9 + arch/ia64/include/asm/topology.h | 1 + arch/tile/include/asm/topology.h | 1 + include/linux/sched.h | 11 +- include/linux/sched/sysctl.h | 8 + include/linux/topology.h | 4 + kernel/sched/core.c | 14 +- kernel/sched/fair.c | 393 +++++++++++++++++++++++++++++++++++--- kernel/sched/sched.h | 15 +- kernel/sysctl.c | 13 ++ 10 files changed, 423 insertions(+), 46 deletions(-) -- 1.7.9.5

10 years, 11 months

[PATCH] KVM: allow host header to be included even for !CONFIG_KVM

by Kevin Hilman

The new context tracking subsystem unconditionally includes kvm_host.h headers for the guest enter/exit macros. This causes a compile failure when KVM is not enabled. Fix by adding an IS_ENABLED(CONFIG_KVM) check to kvm_host so it can be included/compiled even when KVM is not enabled. Cc: Frederic Weisbecker <fweisbec(a)gmail.com> Signed-off-by: Kevin Hilman <khilman(a)linaro.org> --- Applies on v3.9-rc2 include/linux/kvm_host.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index cad77fe..a942863 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -1,6 +1,8 @@ #ifndef __KVM_HOST_H #define __KVM_HOST_H +#if IS_ENABLED(CONFIG_KVM) + /* * This work is licensed under the terms of the GNU GPL, version 2. See * the COPYING file in the top-level directory. @@ -1055,5 +1057,8 @@ static inline bool kvm_vcpu_eligible_for_directed_yield(struct kvm_vcpu *vcpu) } #endif /* CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT */ +#else +static inline void __guest_enter(void) { return; } +static inline void __guest_exit(void) { return; } +#endif /* IS_ENABLED(CONFIG_KVM) */ #endif - -- 1.8.1.2

10 years, 11 months

[PATCH V5 0/5] Queue work on power efficient wq

by Viresh Kumar

This patchset was called: "Create sched_select_cpu() and use it for workqueues" for the first three versions. Earlier discussions over v3, v2 and v1 can be found here: https://lkml.org/lkml/2013/3/18/364 http://lists.linaro.org/pipermail/linaro-dev/2012-November/014344.html http://www.mail-archive.com/linaro-dev@lists.linaro.org/msg13342.html V4 is here: https://lkml.org/lkml/2013/3/31/55 Workqueues can be performance or power oriented. For performance we may want to keep them running on a single cpu, so that it remains cache hot. For power we can give scheduler the liberty to choose target cpu for running work handler. Later one (Power oriented WQ) can be achieved if the workqueue is allocated with WQ_UNBOUND flag. Enabling CONFIG_WQ_POWER_EFFICIENT will set 'wq_power_efficient' to 'true'. Setting 'power_efficient' boot param will override value of 'wq_power_efficient' variable. When 'wq_power_efficient' is set to 'true', we will convert WQ_POWER_EFFICIENT flag to WQ_UNBOUND on wq allocation. And so scheduler will have the liberty to choose where to run this work. Here we are migrating few users of workqueues to WQ_POWER_EFFICIENT. These drivers are found to be very much active on idle or lightly busy system and using WQ_POWER_EFFICIENT for these gave impressive results. These would be used in power saving mode only if relevant configs are enabled at compile time or in bootargs. Otherwise behavior is unchanged. Setup: ----- - ARM Vexpress TC2 - big.LITTLE CPU - Core 0-1: A15, 2-4: A7 - rootfs: linaro-ubuntu-devel This patchset has been tested on a big LITTLE system (heterogeneous) but is useful for all other homogeneous systems as well. During these tests audio was played in background using aplay. Results: ------- Cluster A15 Energy Cluster A7 Energy Total ------------------------- ----------------------- ------ Without this patchset (Energy in Joules): --------------------------------------------------- 0.151162 2.183545 2.334707 0.223730 2.687067 2.910797 0.289687 2.732702 3.022389 0.454198 2.745908 3.200106 0.495552 2.746465 3.242017 Average: 0.322866 2.619137 2.942003 With this patchset (Energy in Joules): ----------------------------------------------- 0.226421 2.283658 2.510079 0.151361 2.236656 2.388017 0.197726 2.249849 2.447575 0.221915 2.229446 2.451361 0.347098 2.257707 2.604805 Average: 0.2289042 2.2514632 2.4803674 Above tests are repeated multiple times and events are tracked using trace-cmd and analysed using kernelshark. And it was easily noticeable that idle time for many cpus has increased considerably, which eventually saved some power. V4->V5: ------- - Created new wq flag: WQ_POWER_EFFICIENT, config option: CONFIG_WQ_POWER_EFFICIENT and kernel param workqueue.power_efficient. - Created few system wide workqueues aligned towards power saving. V3->V4: ------- - Dropped changes to kernel/sched directory and hence sched_select_non_idle_cpu(). - Dropped queue_work_on_any_cpu() - Created system_freezable_unbound_wq - Changed all patches accordingly. V2->V3: ------- - Dropped changes into core queue_work() API, rather create *_on_any_cpu() APIs - Dropped running timers migration patch as that was broken - Migrated few users of workqueues to use *_on_any_cpu() APIs. Viresh Kumar (5): workqueues: Introduce new flag WQ_POWER_EFFICIENT for power oriented workqueues workqueue: Add system wide power_efficient workqueues PHYLIB: queue work on system_power_efficient_wq block: queue work on power efficient wq fbcon: queue work on power efficient wq Documentation/kernel-parameters.txt | 17 +++++++++++++++++ block/blk-core.c | 3 ++- block/blk-ioc.c | 3 ++- block/genhd.c | 12 ++++++++---- drivers/net/phy/phy.c | 9 +++++---- drivers/video/console/fbcon.c | 2 +- include/linux/workqueue.h | 10 ++++++++++ kernel/power/Kconfig | 19 +++++++++++++++++++ kernel/workqueue.c | 24 +++++++++++++++++++++++- 9 files changed, 87 insertions(+), 12 deletions(-) -- 1.7.12.rc2.18.g61b472e

10 years, 11 months

[PATCH 0/2] Early printk support for virtio console devices.

by Pranavkumar Sawargaonkar

This patch-set implements early printk support for virtio console devices without using any hypercalls. The current virtio early printk code in kernel expects that hypervisor will provide some mechanism generally a hypercall to support early printk. This patch-set does not break existing hypercall based early print support. This implementation adds: 1. Early writeonly register named early_wr in virtio console's config space. 2. Host feature flags namely VIRTIO_CONSOLE_F_EARLY_WRITE for telling guest about early-write capability in console device. Early write mechanism: 1. When a guest wants to out some character, it has to simply write the character to early_wr register in config space of virtio console device. Pranavkumar Sawargaonkar (2): virtio: console: Add early writeonly register to config space arm64: earlyprintk support for virtio-mmio console Documentation/virtual/virtio-spec.txt | 13 ++++++++++-- arch/arm64/kernel/early_printk.c | 35 +++++++++++++++++++++++++++++++++ include/uapi/linux/virtio_console.h | 3 +++ 3 files changed, 49 insertions(+), 2 deletions(-) -- 1.7.9.5

10 years, 11 months

[PATCH V3] PM / devfreq: tie suspend/resume to runtime-pm

by Rajagopal Venkat

Devfreq core runtime suspend/resume of a device is explicitly handled by devfreq driver using devfreq_suspend_device() and devfreq_resume_device() apis typically called from runtime suspend/resume callbacks. This patch aims to take away this from devfreq drivers and handle it from runtime-pm core. So that devfreq core runtime suspend/resume of a device is automatically done with runtime pm suspend/resume. The devfreq drivers shouldn't be concerned on when to suspend/resume the devfreq. This patch is targeted to handle devfreq core load monitoring runtime suspend/resume only. Not the actual hardware itself. All the resources like clocks and regulators must still be handled by device driver using runtime-pm. The sequence of devfreq and device runtime suspend/resume is, pm_runtime_suspend(dev) will first suspend device devfreq (if available) before device is suspended to ensure devfreq load monitoring is stopped and no device resources like clocks are accessed while device suspend is in progress. pm_runtime_resume(dev) will resume device devfreq(if available) after device is resumed to ensure device resources like clocks are ready for use. As devfreq runtime suspend/resume is done automatically from runtime core, this patch removes the existing devfreq_suspend_device() and devfreq_resume_device() apis. Signed-off-by: Rajagopal Venkat <rajagopal.venkat(a)linaro.org> ---- Changes from V2: Updated change log to clarify patch deals with runtime suspend/resume Changes from v1: Improved change log and code comments Added NULL check for devfreq runtime-pm callbacks --- drivers/base/power/runtime.c | 21 ++++++++++++- drivers/devfreq/devfreq.c | 69 +++++++++++++++++++++++++++++++++++++++--- include/linux/devfreq.h | 18 +++-------- include/linux/pm.h | 2 ++ 4 files changed, 91 insertions(+), 19 deletions(-) diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 3148b10..2438abc 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -11,6 +11,7 @@ #include <linux/export.h> #include <linux/pm_runtime.h> #include <trace/events/rpm.h> +#include <linux/devfreq.h> #include "power.h" static int rpm_resume(struct device *dev, int rpmflags); @@ -406,6 +407,14 @@ static int rpm_suspend(struct device *dev, int rpmflags) __update_runtime_status(dev, RPM_SUSPENDING); + /* + * Try suspending devfreq before device is runtime suspended. + * It wouldn't make sense to continue devfreq load monitoring + * when device is runtime suspended. + */ + if (dev->power.devfreq && dev->power.devfreq->runtime_suspend) + dev->power.devfreq->runtime_suspend(dev); + if (dev->pm_domain) callback = dev->pm_domain->ops.runtime_suspend; else if (dev->type && dev->type->pm) @@ -421,8 +430,12 @@ static int rpm_suspend(struct device *dev, int rpmflags) callback = dev->driver->pm->runtime_suspend; retval = rpm_callback(callback, dev); - if (retval) + if (retval) { + /* Resume back devfreq on device suspend failure */ + if (dev->power.devfreq && dev->power.devfreq->runtime_resume) + dev->power.devfreq->runtime_resume(dev); goto fail; + } no_callback: __update_runtime_status(dev, RPM_SUSPENDED); @@ -661,6 +674,12 @@ static int rpm_resume(struct device *dev, int rpmflags) __update_runtime_status(dev, RPM_ACTIVE); if (parent) atomic_inc(&parent->power.child_count); + /* + * Resume devfreq after runtime resume sequence to ensure + * device resources are available for devfreq load monitoring. + */ + if (dev->power.devfreq && dev->power.devfreq->runtime_resume) + dev->power.devfreq->runtime_resume(dev); } wake_up_all(&dev->power.wait_queue); diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 44c4079..b8dab0d 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -25,6 +25,7 @@ #include <linux/list.h> #include <linux/printk.h> #include <linux/hrtimer.h> +#include <linux/pm_runtime.h> #include "governor.h" static struct class *devfreq_class; @@ -42,6 +43,9 @@ static LIST_HEAD(devfreq_governor_list); static LIST_HEAD(devfreq_list); static DEFINE_MUTEX(devfreq_list_lock); +static void devfreq_runtime_suspend(struct device *dev); +static void devfreq_runtime_resume(struct device *dev); + /** * find_device_devfreq() - find devfreq struct using device pointer * @dev: device pointer used to lookup device devfreq. @@ -387,6 +391,8 @@ static int devfreq_notifier_call(struct notifier_block *nb, unsigned long type, */ static void _remove_devfreq(struct devfreq *devfreq, bool skip) { + unsigned long flags; + mutex_lock(&devfreq_list_lock); if (IS_ERR(find_device_devfreq(devfreq->dev.parent))) { mutex_unlock(&devfreq_list_lock); @@ -400,6 +406,10 @@ static void _remove_devfreq(struct devfreq *devfreq, bool skip) devfreq->governor->event_handler(devfreq, DEVFREQ_GOV_STOP, NULL); + spin_lock_irqsave(&devfreq->dev.parent->power.lock, flags); + devfreq->dev.parent->power.devfreq = NULL; + spin_unlock_irqrestore(&devfreq->dev.parent->power.lock, flags); + if (devfreq->profile->exit) devfreq->profile->exit(devfreq->dev.parent); @@ -442,6 +452,7 @@ struct devfreq *devfreq_add_device(struct device *dev, { struct devfreq *devfreq; struct devfreq_governor *governor; + unsigned long flags; int err = 0; if (!dev || !profile || !governor_name) { @@ -476,6 +487,12 @@ struct devfreq *devfreq_add_device(struct device *dev, devfreq->previous_freq = profile->initial_freq; devfreq->data = data; devfreq->nb.notifier_call = devfreq_notifier_call; + devfreq->runtime_suspend = devfreq_runtime_suspend; + devfreq->runtime_resume = devfreq_runtime_resume; + spin_lock_irqsave(&dev->power.lock, flags); + dev->power.devfreq = devfreq; + spin_unlock_irqrestore(&dev->power.lock, flags); + devfreq->trans_table = devm_kzalloc(dev, sizeof(unsigned int) * devfreq->profile->max_state * @@ -549,7 +566,7 @@ EXPORT_SYMBOL(devfreq_remove_device); * (e.g., runtime_suspend, suspend) of the device driver that * holds the devfreq. */ -int devfreq_suspend_device(struct devfreq *devfreq) +static int devfreq_suspend_device(struct devfreq *devfreq) { if (!devfreq) return -EINVAL; @@ -560,7 +577,6 @@ int devfreq_suspend_device(struct devfreq *devfreq) return devfreq->governor->event_handler(devfreq, DEVFREQ_GOV_SUSPEND, NULL); } -EXPORT_SYMBOL(devfreq_suspend_device); /** * devfreq_resume_device() - Resume devfreq of a device. @@ -570,7 +586,7 @@ EXPORT_SYMBOL(devfreq_suspend_device); * (e.g., runtime_resume, resume) of the device driver that * holds the devfreq. */ -int devfreq_resume_device(struct devfreq *devfreq) +static int devfreq_resume_device(struct devfreq *devfreq) { if (!devfreq) return -EINVAL; @@ -581,7 +597,52 @@ int devfreq_resume_device(struct devfreq *devfreq) return devfreq->governor->event_handler(devfreq, DEVFREQ_GOV_RESUME, NULL); } -EXPORT_SYMBOL(devfreq_resume_device); + +/** + * devfreq_runtime_suspend() - Suspend devfreq of a device. + * @dev: the device associated with devfreq + * + * This function is intended to be called by the runtime-pm + * core when the device associated with devfreq is + * runtime suspended. + */ +static void devfreq_runtime_suspend(struct device *dev) +{ + struct devfreq *devfreq; + int err; + + mutex_lock(&devfreq_list_lock); + devfreq = find_device_devfreq(dev); + mutex_unlock(&devfreq_list_lock); + + err = devfreq_suspend_device(devfreq); + if (err) + dev_err(dev, "devfreq runtime suspend failed with (%d) error\n", + err); +} + +/** + * devfreq_runtime_resume() - Resume devfreq of a device. + * @dev: the device associated with devfreq + * + * This function is intended to be called by the runtime-pm + * core when the device associated with devfreq is + * runtime resumed. + */ +static void devfreq_runtime_resume(struct device *dev) +{ + struct devfreq *devfreq; + int err; + + mutex_lock(&devfreq_list_lock); + devfreq = find_device_devfreq(dev); + mutex_unlock(&devfreq_list_lock); + + err = devfreq_resume_device(devfreq); + if (err) + dev_err(dev, "devfreq runtime resume failed with (%d) error\n", + err); +} /** * devfreq_add_governor() - Add devfreq governor diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index 5f1ab92..669368b 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -140,6 +140,8 @@ struct devfreq_governor { * @trans_table: Statistics of devfreq transitions * @time_in_state: Statistics of devfreq states * @last_stat_updated: The last time stat updated + * @runtime_suspend: func to runtime suspend devfreq from runtime core + * @runtime_resume: func to runtime resume devfreq from runtime core * * This structure stores the devfreq information for a give device. * @@ -173,6 +175,8 @@ struct devfreq { unsigned int *trans_table; unsigned long *time_in_state; unsigned long last_stat_updated; + void (*runtime_suspend)(struct device *dev); + void (*runtime_resume)(struct device *dev); }; #if defined(CONFIG_PM_DEVFREQ) @@ -182,10 +186,6 @@ extern struct devfreq *devfreq_add_device(struct device *dev, void *data); extern int devfreq_remove_device(struct devfreq *devfreq); -/* Supposed to be called by PM_SLEEP/PM_RUNTIME callbacks */ -extern int devfreq_suspend_device(struct devfreq *devfreq); -extern int devfreq_resume_device(struct devfreq *devfreq); - /* Helper functions for devfreq user device driver with OPP. */ extern struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq, u32 flags); @@ -228,16 +228,6 @@ static inline int devfreq_remove_device(struct devfreq *devfreq) return 0; } -static inline int devfreq_suspend_device(struct devfreq *devfreq) -{ - return 0; -} - -static inline int devfreq_resume_device(struct devfreq *devfreq) -{ - return 0; -} - static inline struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq, u32 flags) { diff --git a/include/linux/pm.h b/include/linux/pm.h index 03d7bb1..734449c 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -40,6 +40,7 @@ extern void (*pm_power_off_prepare)(void); */ struct device; +struct devfreq; #ifdef CONFIG_PM extern const char power_group_name[]; /* = "power" */ @@ -549,6 +550,7 @@ struct dev_pm_info { #endif struct pm_subsys_data *subsys_data; /* Owned by the subsystem. */ struct dev_pm_qos *qos; + struct devfreq *devfreq; /* device devfreq */ }; extern void update_pm_runtime_accounting(struct device *dev); -- 1.7.10.4

10 years, 11 months

[PATCH 0/5] CPUFreq: ARM big LITTLE Fixes

by Viresh Kumar

Hi Rafael, I know I am late for this merge window and you have already closed the gates :) If you can still take them, its good, otherwise we will push this for v3.10-rc2. These are minor fixes for ARM big LITTLE cpufreq driver. It doesn't impact any other driver or cpufreq core and are fairly independent. Viresh Kumar (5): cpufreq: ARM big LITTLE: Select PM_OPP cpufreq: ARM big LITTLE DT: Return correct transition latency cpufreq: ARM big LITTLE DT: Return CPUFREQ_ETERNAL if clock-latency isn't found cpufreq: ARM big LITTLE: Move cpu_to_cluster() to arm_big_little.h cpufreq: ARM big LITTLE: Improve print message drivers/cpufreq/Kconfig.arm | 1 + drivers/cpufreq/arm_big_little.c | 7 +------ drivers/cpufreq/arm_big_little.h | 5 +++++ drivers/cpufreq/arm_big_little_dt.c | 9 +++++---- 4 files changed, 12 insertions(+), 10 deletions(-) -- 1.7.12.rc2.18.g61b472e

10 years, 11 months

[PATCH 0/2] CPUFreq core fixes for v3.10-rc2

by Viresh Kumar

I just saw your pull request and so these should go in rc2 now. These are fixes for cpufreq core and common governor part. They mostly impact systems which have set have_governor_per_policy to true. i.e. big LITTLE cpufreq driver. Viresh Kumar (2): cpufreq: governors: Fix CPUFREQ_GOV_POLICY_{INIT|EXIT} notifiers cpufreq: Issue CPUFREQ_GOV_POLICY_EXIT notifier before dropping policy refcount drivers/cpufreq/cpufreq.c | 6 +++--- drivers/cpufreq/cpufreq_governor.c | 11 +++++++---- drivers/cpufreq/cpufreq_governor.h | 1 + 3 files changed, 11 insertions(+), 7 deletions(-) -- 1.7.12.rc2.18.g61b472e

10 years, 11 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-kernel April 2013