linaro-kernel November 2012

linaro-kernel@lists.linaro.org

36 participants
30 discussions

[PATCH resend 0/4] ARM: KDB FIQ debugger

by Anton Vorontsov

Hello Andrew, Russell, The KDB/NMI core support has been merged into v3.7-rc1, so the only ARM bits are pending now. I addressed all the comments ~two month ago, and since then just resending these patches. I know we're all busy, so no blaming. :) But then let's pass this via -mm? Short description of the KDB/FIQ debugger: The FIQ debugger is a facility that can be used to debug situations when the kernel stuck in uninterruptable sections, e.g. the kernel infinitely loops or deadlocked in an interrupt or with interrupts disabled. On some development boards there is even a special NMI button, which is very useful for debugging weird kernel hangs. And FIQ is basically an NMI, it has a higher priority than IRQs, and upon IRQ exception FIQs are not disabled. It is still possible to disable FIQs (as well as some "NMIs" on other architectures), but via special means. Old changelogs and a full rationale for these patches can be found here: v1-v5, rationale: http://lkml.org/lkml/2012/9/10/2 v6: http://lkml.org/lkml/2012/9/10/2 v7: http://lkml.org/lkml/2012/9/13/367 v8: http://lkml.org/lkml/2012/9/19/525 v9: http://lkml.org/lkml/2012/9/24/538 Thanks! Anton. -- arch/arm/Kconfig | 19 ++++ arch/arm/common/vic.c | 28 +++++ arch/arm/include/asm/hardware/vic.h | 2 + arch/arm/include/asm/kgdb.h | 8 ++ arch/arm/kernel/Makefile | 1 + arch/arm/kernel/entry-armv.S | 167 +-------------------------- arch/arm/kernel/entry-header.S | 170 ++++++++++++++++++++++++++++ arch/arm/kernel/kgdb_fiq.c | 124 ++++++++++++++++++++ arch/arm/kernel/kgdb_fiq_entry.S | 87 ++++++++++++++ arch/arm/mach-versatile/Makefile | 1 + arch/arm/mach-versatile/kgdb_fiq.c | 31 +++++ 11 files changed, 472 insertions(+), 166 deletions(-)

11 years, 4 months

[RFC] Add mempressure cgroup

by Anton Vorontsov

This is an attempt to implement David Rientjes' idea of mempressure cgroup. The main characteristics are the same to what I've tried to add to vmevent API: Internally, it uses Mel Gorman's idea of scanned/reclaimed ratio for pressure index calculation. But we don't expose the index to the userland. Instead, there are three levels of the pressure: o low (just reclaiming, e.g. caches are draining); o medium (allocation cost becomes high, e.g. swapping); o oom (about to oom very soon). The rationale behind exposing levels and not the raw pressure index described here: http://lkml.org/lkml/2012/11/16/675 The API uses standard cgroups eventfd notifications: $ gcc Documentation/cgroups/cgroup_event_listener.c -o \ cgroup_event_listener $ cd /sys/fs/cgroup/ $ mkdir mempressure $ mount -t cgroup cgroup ./mempressure -o mempressure $ cd mempressure $ cgroup_event_listener ./mempressure.level low ("low", "medium", "oom" are permitted values.) Upon hitting the threshold, you should see "/sys/fs/cgroup/mempressure low: crossed" messages. To test that it actually works on per-cgroup basis, I did a small trick: I moved all kswapd into a separate cgroup, and hooked the listener onto another (non-root) cgroup. The listener no longer received global reclaim pressure, which is expected. For a task it is possible to be in both cpusets, memcg and mempressure cgroups, so by rearranging the tasks it should be possible to watch a specific pressure. Note that while this adds the cgroups support, the code is well separated and eventually we might add a lightweight, non-cgroups API, i.e. vmevent. But this is another story. Signed-off-by: Anton Vorontsov <anton.vorontsov(a)linaro.org> --- include/linux/cgroup_subsys.h | 6 + include/linux/vmstat.h | 8 ++ init/Kconfig | 5 + mm/Makefile | 1 + mm/mempressure.c | 287 ++++++++++++++++++++++++++++++++++++++++++ mm/vmscan.c | 3 + 6 files changed, 310 insertions(+) create mode 100644 mm/mempressure.c diff --git a/include/linux/cgroup_subsys.h b/include/linux/cgroup_subsys.h index f204a7a..b9802e2 100644 --- a/include/linux/cgroup_subsys.h +++ b/include/linux/cgroup_subsys.h @@ -37,6 +37,12 @@ SUBSYS(mem_cgroup) /* */ +#if IS_SUBSYS_ENABLED(CONFIG_CGROUP_MEMPRESSURE) +SUBSYS(mpc_cgroup) +#endif + +/* */ + #if IS_SUBSYS_ENABLED(CONFIG_CGROUP_DEVICE) SUBSYS(devices) #endif diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h index 92a86b2..7698341 100644 --- a/include/linux/vmstat.h +++ b/include/linux/vmstat.h @@ -10,6 +10,14 @@ extern int sysctl_stat_interval; +#ifdef CONFIG_CGROUP_MEMPRESSURE +extern void vmpressure(ulong scanned, ulong reclaimed); +extern void vmpressure_prio(int prio); +#else +static inline void vmpressure(ulong scanned, ulong reclaimed) {} +static inline void vmpressure_prio(int prio) {} +#endif + #ifdef CONFIG_VM_EVENT_COUNTERS /* * Light weight per cpu counter implementation. diff --git a/init/Kconfig b/init/Kconfig index 6fdd6e3..7065e44 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -826,6 +826,11 @@ config MEMCG_KMEM the kmem extension can use it to guarantee that no group of processes will ever exhaust kernel resources alone. +config CGROUP_MEMPRESSURE + bool "Memory pressure monitor for Control Groups" + help + TODO + config CGROUP_HUGETLB bool "HugeTLB Resource Controller for Control Groups" depends on RESOURCE_COUNTERS && HUGETLB_PAGE && EXPERIMENTAL diff --git a/mm/Makefile b/mm/Makefile index 6b025f8..40cee19 100644 --- a/mm/Makefile +++ b/mm/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_MIGRATION) += migrate.o obj-$(CONFIG_QUICKLIST) += quicklist.o obj-$(CONFIG_TRANSPARENT_HUGEPAGE) += huge_memory.o obj-$(CONFIG_MEMCG) += memcontrol.o page_cgroup.o +obj-$(CONFIG_CGROUP_MEMPRESSURE) += mempressure.o obj-$(CONFIG_CGROUP_HUGETLB) += hugetlb_cgroup.o obj-$(CONFIG_MEMORY_FAILURE) += memory-failure.o obj-$(CONFIG_HWPOISON_INJECT) += hwpoison-inject.o diff --git a/mm/mempressure.c b/mm/mempressure.c new file mode 100644 index 0000000..5c85bbe --- /dev/null +++ b/mm/mempressure.c @@ -0,0 +1,287 @@ +/* + * Linux VM pressure notifications + * + * Copyright 2012 Linaro Ltd. + * Anton Vorontsov <anton.vorontsov(a)linaro.org> + * + * Based on ideas from David Rientjes, KOSAKI Motohiro, Leonid Moiseichuk, + * Mel Gorman, Minchan Kim and Pekka Enberg. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/cgroup.h> +#include <linux/fs.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/vmstat.h> +#include <linux/atomic.h> +#include <linux/eventfd.h> +#include <linux/swap.h> +#include <linux/printk.h> + +static void mpc_vmpressure(ulong scanned, ulong reclaimed); + +/* + * Generic VM Pressure routines (no cgroups or any other API details) + */ + +/* These are defaults. Might make them configurable one day. */ +static const uint vmpressure_win = SWAP_CLUSTER_MAX * 16; +static const uint vmpressure_level_med = 60; +static const uint vmpressure_level_oom = 99; +static const uint vmpressure_level_oom_prio = 4; + +enum vmpressure_levels { + VMPRESSURE_LOW = 0, + VMPRESSURE_MEDIUM, + VMPRESSURE_OOM, + VMPRESSURE_NUM_LEVELS, +}; + +static const char const *vmpressure_str_levels[] = { + [VMPRESSURE_LOW] = "low", + [VMPRESSURE_MEDIUM] = "medium", + [VMPRESSURE_OOM] = "oom", +}; + +static enum vmpressure_levels vmpressure_level(uint pressure) +{ + if (pressure >= vmpressure_level_oom) + return VMPRESSURE_OOM; + else if (pressure >= vmpressure_level_med) + return VMPRESSURE_MEDIUM; + return VMPRESSURE_LOW; +} + +static ulong vmpressure_calc_level(uint win, uint s, uint r) +{ + ulong p; + + if (!s) + return 0; + + /* + * We calculate the ratio (in percents) of how many pages were + * scanned vs. reclaimed in a given time frame (window). Note that + * time is in VM reclaimer's "ticks", i.e. number of pages + * scanned. This makes it possible to set desired reaction time + * and serves as a ratelimit. + */ + p = win - (r * win / s); + p = p * 100 / win; + + pr_debug("%s: %3lu (s: %6u r: %6u)\n", __func__, p, s, r); + + return vmpressure_level(p); +} + +void vmpressure(ulong scanned, ulong reclaimed) +{ + if (!scanned) + return; + mpc_vmpressure(scanned, reclaimed); +} + +void vmpressure_prio(int prio) +{ + if (prio > vmpressure_level_oom_prio) + return; + + /* OK, the prio is below the threshold, send the pre-OOM event. */ + vmpressure(vmpressure_win, 0); +} + +/* + * Memory pressure cgroup code + */ + +struct mpc_state { + struct cgroup_subsys_state css; + uint scanned; + uint reclaimed; + struct mutex lock; + struct eventfd_ctx *eventfd; + enum vmpressure_levels thres; +}; + +static struct mpc_state *css2mpc(struct cgroup_subsys_state *css) +{ + return container_of(css, struct mpc_state, css); +} + +static struct mpc_state *tsk2mpc(struct task_struct *tsk) +{ + return css2mpc(task_subsys_state(tsk, mpc_cgroup_subsys_id)); +} + +static struct mpc_state *cg2mpc(struct cgroup *cg) +{ + return css2mpc(cgroup_subsys_state(cg, mpc_cgroup_subsys_id)); +} + +static void __mpc_vmpressure(ulong scanned, ulong reclaimed) +{ + struct mpc_state *mpc = tsk2mpc(current); + int level; + + mpc->scanned += scanned; + mpc->reclaimed += reclaimed; + + if (mpc->scanned < vmpressure_win) + return; + + level = vmpressure_calc_level(vmpressure_win, + mpc->scanned, mpc->reclaimed); + if (level >= mpc->thres) { + mutex_lock(&mpc->lock); + if (mpc->eventfd) + eventfd_signal(mpc->eventfd, 1); + mutex_unlock(&mpc->lock); + } +} + +static void mpc_vmpressure(ulong scanned, ulong reclaimed) +{ + /* + * There are two options for implementing cgroup pressure + * notifications: + * + * - Store pressure counter atomically in the task struct. Upon + * hitting 'window' wake up a workqueue that will walk every + * task and sum per-thread pressure into cgroup pressure (to + * which the task belongs). The cons are obvious: bloats task + * struct, have to walk all processes and makes pressue less + * accurate (the window becomes per-thread); + * + * - Store pressure counters in per-cgroup state. This is easy and + * straighforward, and that's how we do things here. But this + * requires us to not put the vmpressure hooks into hotpath, + * since we have to grab some locks. + */ + task_lock(current); + __mpc_vmpressure(scanned, reclaimed); + task_unlock(current); +} + +static struct cgroup_subsys_state *mpc_create(struct cgroup *cg) +{ + struct mpc_state *mpc; + + mpc = kzalloc(sizeof(*mpc), GFP_KERNEL); + if (!mpc) + return ERR_PTR(-ENOMEM); + + mutex_init(&mpc->lock); + + return &mpc->css; +} + +static int mpc_pre_destroy(struct cgroup *cg) +{ + struct mpc_state *mpc = cg2mpc(cg); + int ret = 0; + + mutex_lock(&mpc->lock); + + if (mpc->eventfd) + ret = -EBUSY; + + mutex_unlock(&mpc->lock); + + return ret; +} + +static void mpc_destroy(struct cgroup *cg) +{ + struct mpc_state *mpc = cg2mpc(cg); + + kfree(mpc); +} + +static ssize_t mpc_read_level(struct cgroup *cg, struct cftype *cft, + struct file *file, char __user *buf, + size_t sz, loff_t *ppos) +{ + struct mpc_state *mpc = cg2mpc(cg); + uint level; + const char *str; + + mutex_lock(&mpc->lock); + + level = vmpressure_calc_level(vmpressure_win, + mpc->scanned, mpc->reclaimed); + mpc->scanned = 0; + mpc->reclaimed = 0; + + mutex_unlock(&mpc->lock); + + str = vmpressure_str_levels[level]; + return simple_read_from_buffer(buf, sz, ppos, str, strlen(str)); +} + +static int mpc_register_level_event(struct cgroup *cg, struct cftype *cft, + struct eventfd_ctx *eventfd, + const char *args) +{ + struct mpc_state *mpc = cg2mpc(cg); + int i; + int ret; + + mutex_lock(&mpc->lock); + + /* + * It's easy to implement multiple thresholds, but so far we don't + * need it. + */ + if (mpc->eventfd) { + ret = -EBUSY; + goto out_unlock; + } + + ret = -EINVAL; + for (i = 0; i < VMPRESSURE_NUM_LEVELS; i++) { + if (strcmp(vmpressure_str_levels[i], args)) + continue; + mpc->eventfd = eventfd; + mpc->thres = i; + ret = 0; + break; + } +out_unlock: + mutex_unlock(&mpc->lock); + + return ret; +} + +static void mpc_unregister_level_event(struct cgroup *cg, struct cftype *cft, + struct eventfd_ctx *eventfd) +{ + struct mpc_state *mpc = cg2mpc(cg); + + mutex_lock(&mpc->lock); + BUG_ON(mpc->eventfd != eventfd); + mpc->eventfd = NULL; + mutex_unlock(&mpc->lock); +} + +static struct cftype mpc_files[] = { + { + .name = "level", + .read = mpc_read_level, + .register_event = mpc_register_level_event, + .unregister_event = mpc_unregister_level_event, + }, + {}, +}; + +struct cgroup_subsys mpc_cgroup_subsys = { + .name = "mempressure", + .subsys_id = mpc_cgroup_subsys_id, + .create = mpc_create, + .pre_destroy = mpc_pre_destroy, + .destroy = mpc_destroy, + .base_cftypes = mpc_files, +}; diff --git a/mm/vmscan.c b/mm/vmscan.c index 48550c6..430d8a5 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1877,6 +1877,8 @@ restart: shrink_active_list(SWAP_CLUSTER_MAX, lruvec, sc, LRU_ACTIVE_ANON); + vmpressure(sc->nr_scanned - nr_scanned, nr_reclaimed); + /* reclaim/compaction might need reclaim to continue */ if (should_continue_reclaim(lruvec, nr_reclaimed, sc->nr_scanned - nr_scanned, sc)) @@ -2099,6 +2101,7 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist, count_vm_event(ALLOCSTALL); do { + vmpressure_prio(sc->priority); sc->nr_scanned = 0; aborted_reclaim = shrink_zones(zonelist, sc); -- 1.8.0

11 years, 4 months

[ACTIVITY] (Appala) 2012-11-26 to 2012-11-30

by Appala Bade

==== Activity Summary ==== 1.Analyzed Binder IPC driver and Middleware source code. 2.Drafted binder unit testcase to implement( https://docs.google.com/a/linaro.org/document/d/1uqjaK4eEyjBgT7-p3tSK0zZIg-… ). 3.Working on Juice project environment setup. Thanks, Appala

11 years, 4 months

omap4iss driver code missing in Linaro 12.07

by S.Sharavana Ram Kumar

Hi, I have the source code of Linaro ICS kernel 3.4 (Linaro version 12.07). In this kernel source code V4L2 driver related to omap4 Camera (omap4 iss) is missing. In the earlier ICS kernel 3.2, it was under the folder drivers/media/video/omap4iss Is it replaced with some other driver or should I take it from to previous ICS kernel 3.2 version? Please provide some pointers related to this. ----- Regards, S.Sharavana

11 years, 4 months

[PATCH] ARM: mm: Allow an empty PMD in alloc_init_pte()

by Jon Medhurst (Tixy)

The Android patch titled "ARM: allow the kernel text section to be made read-only" modifies alloc_init_pte() and adds a BUG_ON to detect the case where a section mapping is being overwritten. However the test doesn't allow for the legitimate case where the PMD is empty, as can happen for kernels built with CONFIG_ARM_LPAE. So extend the test to allow this. Signed-off-by: Jon Medhurst <tixy(a)linaro.org> --- arch/arm/mm/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 9eb7a4e..c35bbda 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -587,7 +587,7 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, pte_t *pte = start_pte + pte_index(addr); /* If replacing a section mapping, the whole section must be replaced */ - BUG_ON(pmd_bad(*pmd) && ((addr | end) & ~PMD_MASK)); + BUG_ON(!pmd_none(*pmd) && pmd_bad(*pmd) && ((addr | end) & ~PMD_MASK)); do { set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0); -- 1.7.10.4

11 years, 4 months

[RFC PATCH] ARM: ftrace: Ensure code modifications are synchronised across all cpus

by Jon Medhurst (Tixy)

When the generic ftrace implementation modifies code for trace-points it uses stop_machine() to call ftrace_modify_all_code() on one CPU. This ultimately calls the ARM specific function ftrace_modify_code() which updates the instruction and then does flush_icache_range(). As this cache flushing only operates on the local CPU then other cores may end up execute the old instruction if it's still in their icaches. This may or may not cause problems for the use of ftrace on kernels compiled for ARM instructions. However, Thumb2 instructions can straddle two cache lines so its possible for half the old instruction to be in the cache and half the new one, leading the the CPU executing garbage. This patch fixes this situation by providing and arch specific implementation of arch_ftrace_update_code() which ensures that after one core has modified all the code, the other cores invalidate their icaches before continuing. Signed-off-by: Jon Medhurst <tixy(a)linaro.org> --- arch/arm/kernel/ftrace.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index 34e5664..38b670c 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -14,6 +14,7 @@ #include <linux/ftrace.h> #include <linux/uaccess.h> +#include <linux/stop_machine.h> #include <asm/cacheflush.h> #include <asm/opcodes.h> @@ -156,6 +157,39 @@ int ftrace_make_nop(struct module *mod, return ret; } +struct afmc_data { + int command; + atomic_t cpu; + atomic_t done; +}; + +static int __arch_ftrace_modify_code(void *data) +{ + struct afmc_data *afmcd = data; + + if (atomic_inc_return(&afmcd->cpu) == num_online_cpus()) { + /* Last cpu to get into this function does the actual work */ + ftrace_modify_all_code(afmcd->command); + wmb(); + atomic_set(&afmcd->done, true); + } else { + /* Other cpus wait for the code modifications to be done */ + rmb(); + while (!atomic_read(&afmcd->done)) + cpu_relax(); + /* Ensure icache is consistent with the code changes */ + __flush_icache_all(); + } + + return 0; +} + +void arch_ftrace_update_code(int command) +{ + struct afmc_data afmcd = { command }; + stop_machine(__arch_ftrace_modify_code, &afmcd, cpu_online_mask); +} + int __init ftrace_dyn_arch_init(void *data) { *(unsigned long *)data = 0; -- 1.7.10.4

11 years, 4 months

[PATCH resend 0/10] Get rid of FIQ_START/enable/disable_fiq() + some FIQ cleanups

by Anton Vorontsov

Hello Andrew, Russell, These are small cleanups that I keep resending since Aug. Andrew, can you please take them for the time being? The rationale is the same: During KDB FIQ patches review Russell mentioned that I should not introduce another FIQ_START. It seems that in v3.6-rc the FIQ_START issue was somewhat band-aided, i.e. machines don't necessary need to define this stuff any longer, but I also read the background of the issue, and Russell once said that he don't want the FIQ subsystem to mess with genirq. So, the patch set is pretty straightforward: - Get rid of FIQ_START. Nobody but platform-specific code (and platform-specific drivers) should know the details about which interrupt can be routed to FIQ and which cannot; - Remove disable/enable_fiq() calls from the FIQ subsys. Thanks! -- arch/arm/include/asm/fiq.h | 2 - arch/arm/include/asm/mach/irq.h | 7 +++- arch/arm/kernel/fiq.c | 37 +++++-------------- arch/arm/kernel/irq.c | 2 - arch/arm/mach-omap1/include/mach/irqs.h | 4 -- arch/arm/mach-rpc/dma.c | 4 +- arch/arm/mach-rpc/include/mach/irqs.h | 8 ++-- arch/arm/mach-rpc/irq.c | 21 ++--------- arch/arm/mach-s3c24xx/include/mach/irqs.h | 3 -- arch/arm/plat-mxc/avic.c | 5 --- arch/arm/plat-mxc/include/mach/irqs.h | 2 - arch/arm/plat-mxc/tzic.c | 5 --- arch/arm/plat-s3c24xx/irq.c | 6 +-- .../media/platform/soc_camera/mx1_camera.c | 6 +-- sound/soc/fsl/imx-pcm-fiq.c | 4 +- 15 files changed, 31 insertions(+), 85 deletions(-)

11 years, 4 months

[RFC v3 0/3] vmpressure_fd: Linux VM pressure notifications

by Anton Vorontsov

Hi all, This is the third RFC. As suggested by Minchan Kim, the API is much simplified now (comparing to vmevent_fd): - As well as Minchan, KOSAKI Motohiro didn't like the timers, so the timers are gone now; - Pekka Enberg didn't like the complex attributes matching code, and so it is no longer there; - Nobody liked the raw vmstat attributes, and so they were eliminated too. But, conceptually, it is the exactly the same approach as in v2: three discrete levels of the pressure -- low, medium and oom. The levels are based on the reclaimer inefficiency index as proposed by Mel Gorman, but userland does not see the raw index values. The description why I moved away from reporting the raw 'reclaimer inefficiency index' can be found in v2: http://lkml.org/lkml/2012/10/22/177 While the new API is very simple, it is still extensible (i.e. versioned). As there are a lot of drastic changes in the API itself, I decided to just add a new files along with vmevent, it is much easier to review it this way (I can prepare a separate patch that removes vmevent files, if we care to preserve the history through the vmevent tree). Thanks, Anton. -- Documentation/sysctl/vm.txt | 47 +++++ arch/x86/syscalls/syscall_64.tbl | 1 + include/linux/syscalls.h | 2 + include/linux/vmpressure.h | 128 ++++++++++++ kernel/sys_ni.c | 1 + kernel/sysctl.c | 31 +++ mm/Kconfig | 13 ++ mm/Makefile | 1 + mm/vmpressure.c | 231 +++++++++++++++++++++ mm/vmscan.c | 5 + tools/testing/vmpressure/.gitignore | 1 + tools/testing/vmpressure/Makefile | 30 +++ tools/testing/vmpressure/vmpressure-test.c | 93 +++++++++ 13 files changed, 584 insertions(+)

11 years, 4 months

[ACTIVITY] (Rajanikanth H V) 2012-11-19 to 2012-11-23

by Rajanikanth HV

==== Activity Summary ==== - Finalized the blueprint based on detailed requirements captured Note: i.MX is the new platform added to analysis list - Collected build time kernel image and driver data size information across the required platform: - Was blocked on collecting runtime kernel and modules sizes information on u8500 platform, as i found boot time issue on 3.7-rc6 version: Ethernet driver is failing to initialize, debugging further i found that regulator for smsc911x chip is not being turned on. Note: Did not observe above said issue on 3.6, - Implemented review comments from "francesco lavra" regarding ab8500 mfd BM devices patches, manually rebased(against 3.7-rc6), tested and communicated the patchset to ML's. - Anton has merged my previous patch set(thanks to anton), preparing delta patches with the latest one ==== Plan ==== - Communicate delta patchs for ab8500 mfd to anton - Continue to gather and analyze build and runtime size information - Discuss and consolidate with arnd on the zImage size data ontained ==== Issues ==== 0.5 day holiday

11 years, 4 months

[ACTIVITY] (Anton Vorontsov) 2012-11-12 - 2012-11-23

by Anton Vorontsov

== Highlights == * While cgroups discussion was ongoing, I finally found some time to revive my Android emulator setup and validate stock out of memory killer. Running with in-kernel LMK completely disabled (and using ulmkd instead) I could trigger OOMK by large instant allocations, and the OOMK was always choosing the right target (i.e. w/ the correct oom_adj). So it behaves exactly as expected, and I could not reproduce any rumoured issues with it; * Started work on mempressure cgroup and per-thread vmpressure. Basically, this is 'everything from scratch', again. :( This will surely slip v3.8, although hopefully I'll have a draft/RFC to show this week; * Resent KDB/FIQ/Kiosk patches, this time to Andrew Morton.

11 years, 4 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-kernel November 2012