linaro-kernel March 2014

linaro-kernel@lists.linaro.org

86 participants
221 discussions

mainline boot: 45 pass, 3 fail (v3.14-rc8)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc8 Failed boot tests (console logs at the end) =========================================== imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig tegra30-beaver: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.4 sec legacy,da850evm PASS: 0 min 14.4 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 53.3 sec am335x-boneblack PASS: 0 min 25.9 sec omap3-beagle-xm PASS: 1 min 0.7 sec legacy,3530beagle PASS: 0 min 34.4 sec omap4-panda PASS: 1 min 6.2 sec omap3-overo-tobi PASS: 0 min 23.4 sec am335x-bone PASS: 0 min 27.5 sec omap3-overo-storm-tobi PASS: 0 min 22.5 sec omap5-uevm PASS: 1 min 2.1 sec omap4-panda-es PASS: 1 min 10.0 sec legacy,3730storm PASS: 0 min 23.7 sec legacy,3530overo PASS: 0 min 21.6 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 43.9 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 20.6 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual FAIL: 0 min 31.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.7 sec imx6q-wandboard PASS: 0 min 17.1 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 9.5 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.8 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.9 sec sun4i-a10-cubieboard PASS: 0 min 12.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 50.5 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 18.1 sec tegra30-beaver FAIL: 0 min 31.4 sec am335x-boneblack PASS: 0 min 23.7 sec omap3-beagle-xm PASS: 0 min 48.5 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec armada-370-mirabox PASS: 0 min 22.1 sec omap4-panda PASS: 0 min 54.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.8 sec sun4i-a10-cubieboard PASS: 0 min 17.2 sec bcm28155-ap PASS: 1 min 4.2 sec omap3-overo-tobi PASS: 0 min 22.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.8 sec am335x-bone PASS: 0 min 26.2 sec omap3-overo-storm-tobi PASS: 0 min 21.2 sec omap5-uevm PASS: 1 min 49.6 sec imx6q-wandboard PASS: 0 min 17.4 sec omap4-panda-es PASS: 0 min 59.3 sec imx6dl-wandboard,wand-dual FAIL: 0 min 31.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 31.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.9 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.2 sec armada-370-mirabox PASS: 0 min 20.1 sec Console logs for failures ========================= imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : ['off'] Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ tegra30-beaver: FAIL: last 80 lines of boot log: ------------------------------------------------ Connected to beaver console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(beaver console)> hardreset (user:khilman) Reboot beaver Reboot: beaver ; ip9258 1 2 : off, sleep, on U-Boot SPL 2013.07-rc3-00036-gd84eb85 (Aug 07 2013 - 18:31:58) U-Boot 2013.07-rc3-00036-gd84eb85 (Aug 07 2013 - 18:31:58) TEGRA30 Board: NVIDIA Beaver I2C: ready DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: se 0 Tegra30 (Beaver) # ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

[PATCH] tick: fix spelling mistake in tick_handle_periodic()

by Viresh Kumar

One of the comments in tick_handle_periodic() had 'when' instead of 'which' (My guess :)). Fix it. Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> --- kernel/time/tick-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 20b2fe3..791a3a2 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -118,7 +118,7 @@ void tick_handle_periodic(struct clock_event_device *dev) * to be sure we're using a real hardware clocksource. * Otherwise we could get trapped in an infinite * loop, as the tick_periodic() increments jiffies, - * when then will increment time, posibly causing + * which then will increment time, posibly causing * the loop to trigger again and again. */ if (timekeeping_valid_for_hres()) -- 1.7.12.rc2.18.g61b472e

10 years, 3 months

[PATCH V2] tick: fix spelling mistake in tick_handle_periodic()

by Viresh Kumar

One of the comments in tick_handle_periodic() had 'when' instead of 'which' (My guess :)). Fix it. Also fix spelling mistake in 'Possible'. Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> --- V1->V2: Fix spelling mistake of possible as well. kernel/time/tick-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 20b2fe3..0fec634 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -118,7 +118,7 @@ void tick_handle_periodic(struct clock_event_device *dev) * to be sure we're using a real hardware clocksource. * Otherwise we could get trapped in an infinite * loop, as the tick_periodic() increments jiffies, - * when then will increment time, posibly causing + * which then will increment time, possibly causing * the loop to trigger again and again. */ if (timekeeping_valid_for_hres()) -- 1.7.12.rc2.18.g61b472e

10 years, 3 months

next boot: 35 pass, 9 fail (next-20140325)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140325 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: multi_v7_defconfig imx6q-wandboard: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 53.5 sec am335x-boneblack PASS: 0 min 25.8 sec omap3-beagle-xm PASS: 1 min 0.9 sec legacy,3530beagle PASS: 0 min 36.1 sec omap4-panda PASS: 1 min 8.5 sec omap3-overo-tobi PASS: 0 min 23.7 sec am335x-bone PASS: 0 min 27.6 sec omap3-overo-storm-tobi PASS: 0 min 25.1 sec omap5-uevm PASS: 1 min 3.0 sec omap4-panda-es PASS: 1 min 3.3 sec legacy,3730storm PASS: 0 min 23.5 sec legacy,3530overo PASS: 0 min 21.7 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 40.8 sec sun7i-a20-cubieboard2 FAIL: 0 min 19.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.3 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual FAIL: 0 min 31.4 sec imx6dl-wandboard,wand-solo FAIL: 0 min 22.6 sec imx6q-wandboard FAIL: 0 min 21.2 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 23.0 sec sun4i-a10-cubieboard PASS: 0 min 17.4 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.8 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 52.7 sec multi_v7_defconfig ------------------ qcom-apq8074-dragonboard PASS: 1 min 9.6 sec ste-snowball FAIL: 0 min 33.5 sec tegra30-beaver PASS: 0 min 19.9 sec am335x-boneblack PASS: 0 min 23.9 sec omap3-beagle-xm PASS: 0 min 55.7 sec sun7i-a20-cubieboard2 FAIL: 0 min 19.8 sec armada-370-mirabox PASS: 0 min 22.2 sec omap4-panda PASS: 0 min 51.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.2 sec sun4i-a10-cubieboard PASS: 0 min 14.6 sec bcm28155-ap PASS: 1 min 15.0 sec omap3-overo-tobi PASS: 0 min 22.0 sec imx6dl-wandboard,wand-solo FAIL: 0 min 22.4 sec am335x-bone PASS: 0 min 31.6 sec omap3-overo-storm-tobi PASS: 0 min 24.0 sec omap5-uevm PASS: 1 min 43.8 sec imx6q-wandboard FAIL: 0 min 31.5 sec omap4-panda-es PASS: 0 min 54.8 sec imx6dl-wandboard,wand-dual FAIL: 0 min 31.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.5 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.5 sec Console logs for failures ========================= multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-3SPYNb/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-3SPYNb/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-3SPYNb/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.7 MiB/s done Bytes transferred = 4595424 (461ee0 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-3SPYNb/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-3SPYNb/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-3SPYNb/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x461ee0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.81 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.164 =>setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 =>if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-solo-bAcavE/zImage tftp 0x10800000 192.168.1.2:tmp/wand-solo-bAcavE/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-bAcavE/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.5 MiB/s done Bytes transferred = 5223440 (4fb410 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-solo-bAcavE/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-solo-bAcavE/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-bAcavE/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 26637 (680d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100980c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.60 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 80 lines of boot log: ------------------------------------------------- U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 => setenv bootargs console=ttymxc0,115200 setenv bootargs console=ttymxc0,115200 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.163 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-quad-ot6Kuw/zImage tftp 0x10800000 192.168.1.2:tmp/wand-quad-ot6Kuw/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-ot6Kuw/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 2.7 MiB/s done Bytes transferred = 5223440 (4fb410 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-quad-ot6Kuw/imx6q-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-quad-ot6Kuw/imx6q-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-ot6Kuw/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 2.6 MiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4fb410 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.16 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $ dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-Ow5Avd/tmp70n7TB-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-Ow5Avd/tmp70n7TB-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-Ow5Avd/tmp70n7TB-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4611385 (465d39 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4611321 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.52 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-rc1ORR/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-rc1ORR/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-rc1ORR/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 2.7 MiB/s done Bytes transferred = 4570072 (45bbd8 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.8 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-rc1ORR/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-rc1ORR/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-rc1ORR/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45bbd8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.84 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => version version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.164 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-solo-OWL_0Q/zImage tftp 0x10800000 192.168.1.2:tmp/wand-solo-OWL_0Q/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-OWL_0Q/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 1.5 MiB/s done Bytes transferred = 4570072 (45bbd8 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) =>tftp 0x11000000 192.168.1.2:tmp/wand-solo-OWL_0Q/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-solo-OWL_0Q/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-OWL_0Q/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 26637 (680d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100980c Starting kernel ... Tz7r~y8þ¢ŒX²s4fMs/<_X~X€Q%ÓÑµR0töô@dxBVàkL6cvh/_.gzB²ÐÖg?wV¿Ìë{¯ß/@7`kVÖ¿ÈëÈh/_oBPák\Vâöèoßoc@Pik'V?pVØëöÔ+ß n|4q:5<±²3rDbf^ôþö²øø²d?zð0ÒôýŸŽÔ©(j>XVÀg¿ÖðÖßPx^wt]vdbyVvÐ2²hz3ëþüŒ<ñöÔM>Ó@PVgV¿ùoZW}~'\{P\?PWAfzWgVë{Vc3vz`àVÄg÷vg[wtT7]V¿ÙÐÖóûæú×gVëû7ðñw}5^Vg?@ZÃÄ÷}W}X'Ý»Ü¿Öùw~V3GOHwsøÖwfa`Q@gkt\W}~§ÜÔ¿Ð×InzWG#wrppw4^QÔg_}W}~Ö·ØûÖ¿Ð?PWAfzWgTë{7Vc}w<r.<9}14~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.44 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 80 lines of boot log: ------------------------------------------------- Connected to wand-quad console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-quad console)> hardreset (user:khilman) Reboot wand-quad Reboot: wand-quad ; phidget 2 3 : off, sleep, on U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: Wandboard DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial 0 => ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.48 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

[PATCH] tick: Remove code duplication in tick_handle_periodic()

by Viresh Kumar

tick_handle_periodic() is calling ktime_add() at two places, first before the infinite loop and then at the end of infinite loop. We can rearrange code a bit to fix code duplication here. It looks quite simple and shouldn't break anything, I guess :) Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> --- kernel/time/tick-common.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 20b2fe3..d610ae3 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -98,18 +98,19 @@ static void tick_periodic(int cpu) void tick_handle_periodic(struct clock_event_device *dev) { int cpu = smp_processor_id(); - ktime_t next; + ktime_t next = dev->next_event; tick_periodic(cpu); if (dev->mode != CLOCK_EVT_MODE_ONESHOT) return; - /* - * Setup the next period for devices, which do not have - * periodic mode: - */ - next = ktime_add(dev->next_event, tick_period); for (;;) { + /* + * Setup the next period for devices, which do not have + * periodic mode: + */ + next = ktime_add(next, tick_period); + if (!clockevents_program_event(dev, next, false)) return; /* @@ -123,7 +124,6 @@ void tick_handle_periodic(struct clock_event_device *dev) */ if (timekeeping_valid_for_hres()) tick_periodic(cpu); - next = ktime_add(next, tick_period); } } -- 1.7.12.rc2.18.g61b472e

10 years, 3 months

mainline boot: 46 pass, 2 fail (v3.14-rc7-117-g8223164)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc7-117-g8223164 Failed boot tests (console logs at the end) =========================================== imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.1 sec legacy,da850evm PASS: 0 min 14.5 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 52.1 sec am335x-boneblack PASS: 0 min 25.8 sec omap3-beagle-xm PASS: 1 min 0.9 sec legacy,3530beagle PASS: 0 min 50.5 sec omap4-panda PASS: 1 min 6.2 sec omap3-overo-tobi PASS: 0 min 23.1 sec am335x-bone PASS: 0 min 27.5 sec omap3-overo-storm-tobi PASS: 0 min 25.3 sec omap5-uevm PASS: 1 min 1.8 sec omap4-panda-es PASS: 1 min 5.6 sec legacy,3730storm PASS: 0 min 23.7 sec legacy,3530overo PASS: 0 min 21.5 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 47.8 sec sun7i-a20-cubieboard2 PASS: 0 min 14.3 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual FAIL: 0 min 31.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.4 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 0 min 59.0 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.7 sec sun4i-a10-cubieboard PASS: 0 min 12.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 1 min 0.0 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.6 sec tegra30-beaver PASS: 0 min 19.6 sec am335x-boneblack PASS: 0 min 23.4 sec omap3-beagle-xm PASS: 0 min 47.5 sec sun7i-a20-cubieboard2 PASS: 0 min 14.6 sec armada-370-mirabox PASS: 0 min 22.0 sec omap4-panda PASS: 0 min 54.4 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 19.0 sec bcm28155-ap PASS: 1 min 4.9 sec omap3-overo-tobi PASS: 0 min 21.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.1 sec am335x-bone PASS: 0 min 26.2 sec omap3-overo-storm-tobi PASS: 0 min 24.2 sec omap5-uevm PASS: 1 min 51.6 sec imx6q-wandboard PASS: 0 min 17.6 sec omap4-panda-es PASS: 0 min 58.9 sec imx6dl-wandboard,wand-dual FAIL: 0 min 31.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.8 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 42.1 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.0 sec armada-370-mirabox PASS: 0 min 20.1 sec Console logs for failures ========================= imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : ['off'] Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

queue boot: 3 pass, 2 fail (v3.10.34)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.34 Failed boot tests (console logs at the end) =========================================== imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig Full Report =========== imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual FAIL: 0 min 31.4 sec imx6dl-wandboard,wand-solo FAIL: 0 min 31.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 16.5 sec omap2plus_defconfig ------------------- omap4-panda PASS: 1 min 7.3 sec omap3-tobi PASS: 0 min 33.9 sec Console logs for failures ========================= imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into u-boot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-solo console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-solo console)> hardreset (user:khilman) Reboot wand-solo Reboot: wand-solo ; phidget 2 2 : off, sleep, on U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) CPU: Freescale i.MX6SOLO rev1.1 at 792 MHz Reset cause: POR Board: Wandboard DRAM: 512 MiB WARNING: Caches not enabled MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default env 0 => ~$off # PYBOOT: Exception: ERROR: Could not break into u-boot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

queue boot: 40 pass, 2 fail (v3.13.7)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.13.7 Failed boot tests (console logs at the end) =========================================== imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 14.9 sec legacy,da850evm PASS: 0 min 14.3 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 53.1 sec am335x-boneblack PASS: 0 min 25.6 sec omap3-beagle-xm PASS: 0 min 57.9 sec legacy,3530beagle PASS: 0 min 35.9 sec omap4-panda PASS: 1 min 5.0 sec omap3-tobi PASS: 0 min 22.7 sec am335x-bone PASS: 0 min 27.4 sec omap4-panda-es PASS: 1 min 3.1 sec legacy,3730storm PASS: 0 min 23.7 sec legacy,3530overo PASS: 0 min 21.2 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 13.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual FAIL: 0 min 31.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec imx6q-wandboard PASS: 0 min 17.0 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 11.8 sec sun4i-a10-cubieboard PASS: 0 min 17.4 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.8 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 35.0 sec tegra30-beaver PASS: 0 min 17.1 sec am335x-boneblack PASS: 0 min 22.5 sec omap3-beagle-xm PASS: 0 min 59.0 sec sun7i-a20-cubieboard2 PASS: 0 min 14.0 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 3.9 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.7 sec sun4i-a10-cubieboard PASS: 0 min 18.2 sec bcm28155-ap PASS: 0 min 58.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.2 sec omap3-tobi PASS: 0 min 20.9 sec am335x-bone PASS: 0 min 24.1 sec imx6q-wandboard PASS: 0 min 17.6 sec omap4-panda-es PASS: 1 min 3.1 sec imx6dl-wandboard,wand-dual FAIL: 0 min 31.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 31.5 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.0 sec Console logs for failures ========================= imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : ['off'] Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

next boot: 35 pass, 9 fail (next-20140324)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140324 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: multi_v7_defconfig imx6q-wandboard: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 52.5 sec am335x-boneblack PASS: 0 min 25.8 sec omap3-beagle-xm PASS: 0 min 57.3 sec legacy,3530beagle PASS: 0 min 38.5 sec omap4-panda PASS: 1 min 4.6 sec omap3-overo-tobi PASS: 0 min 23.4 sec am335x-bone PASS: 0 min 27.6 sec omap3-overo-storm-tobi PASS: 0 min 22.8 sec omap5-uevm PASS: 1 min 1.4 sec omap4-panda-es PASS: 1 min 10.2 sec legacy,3730storm PASS: 0 min 23.1 sec legacy,3530overo PASS: 0 min 21.4 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 39.8 sec sun7i-a20-cubieboard2 FAIL: 0 min 20.0 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.2 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual FAIL: 0 min 31.4 sec imx6dl-wandboard,wand-solo FAIL: 0 min 22.8 sec imx6q-wandboard FAIL: 0 min 21.0 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 22.8 sec sun4i-a10-cubieboard PASS: 0 min 12.6 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.7 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.7 sec multi_v7_defconfig ------------------ qcom-apq8074-dragonboard PASS: 1 min 4.2 sec ste-snowball FAIL: 0 min 33.6 sec tegra30-beaver PASS: 0 min 17.0 sec am335x-boneblack PASS: 0 min 23.9 sec omap3-beagle-xm PASS: 0 min 48.7 sec sun7i-a20-cubieboard2 FAIL: 0 min 22.9 sec armada-370-mirabox PASS: 0 min 22.3 sec omap4-panda PASS: 0 min 52.4 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.0 sec sun4i-a10-cubieboard PASS: 0 min 14.4 sec bcm28155-ap PASS: 0 min 58.7 sec omap3-overo-tobi PASS: 0 min 22.1 sec imx6dl-wandboard,wand-solo FAIL: 0 min 22.4 sec am335x-bone PASS: 0 min 26.6 sec omap3-overo-storm-tobi PASS: 0 min 21.2 sec omap5-uevm PASS: 1 min 39.2 sec imx6q-wandboard FAIL: 0 min 31.4 sec omap4-panda-es PASS: 0 min 53.4 sec imx6dl-wandboard,wand-dual FAIL: 0 min 31.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.4 sec Console logs for failures ========================= multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i#setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-vNPTNy/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-vNPTNy/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-vNPTNy/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.7 MiB/s done Bytes transferred = 4595352 (461e98 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i#tftp 0x41000000 192.168.1.2:tmp/cubie2-vNPTNy/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-vNPTNy/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-vNPTNy/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x461e98 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.97 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 =>setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.164 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-solo-URKjvh/zImage tftp 0x10800000 192.168.1.2:tmp/wand-solo-URKjvh/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-URKjvh/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.5 MiB/s done Bytes transferred = 5223312 (4fb390 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-solo-URKjvh/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-solo-URKjvh/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-URKjvh/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 26637 (680d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none =>bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100980c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.83 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 80 lines of boot log: ------------------------------------------------- U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 => setenv bootargs console=ttymxc0,115200 setenv bootargs console=ttymxc0,115200 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.163 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-quad-Quemne/zImage tftp 0x10800000 192.168.1.2:tmp/wand-quad-Quemne/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-Quemne/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 2.7 MiB/s done Bytes transferred = 5223312 (4fb390 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-quad-Quemne/imx6q-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-quad-Quemne/imx6q-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-Quemne/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 2.6 MiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4fb390 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.97 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $ dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-9EfiYm/tmpH3KDtr-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-9EfiYm/tmpH3KDtr-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-9EfiYm/tmpH3KDtr-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4611121 (465c31 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4611057 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.60 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-WMoTzt/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-WMoTzt/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-WMoTzt/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 2.7 MiB/s done Bytes transferred = 4569808 (45bad0 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-WMoTzt/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-WMoTzt/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-WMoTzt/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45bad0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.86 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => version version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 =>setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' =>if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi =>setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.164 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-solo-Gnxifl/zImage tftp 0x10800000 192.168.1.2:tmp/wand-solo-Gnxifl/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-Gnxifl/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 1.5 MiB/s done Bytes transferred = 4569808 (45bad0 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-solo-Gnxifl/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-solo-Gnxifl/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-Gnxifl/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 26637 (680d hex) =>printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100980c Starting kernel ... Wzð9y<l <±3òžr'<{tZ$%DJ$I%`'p0tvtBdúá²Vgk?è¶¹ëö{ý+ýi.oy`V`køÖÖ{T+_in@ÑÖg??hùÖÖ{+_ `2PakùÖö{k_nCBP`kxV9pVx^ò[/_|vð>5~023ðT"f^t~Õ¶øø?hv^@tŸô,¬(9h>~*PVg?¿Ùdi_sVØLwv~væâ;0fr0nYt_|Œ<ÒôöÍŸS@<ÐggpTÀ÷RW\T']PTVpwûV3OhOQPawx`<YVgw[oZW]·ØûÐÜÐ×s{f;O'Vë{Vc3x@Ðgk_V_z×Þ·ÙÜ¿Ð×Öîú×gkwspaw×ÔgkW}W}~V7Y{V?]TWs{f>OXws7VcýwWààÐÔgô2|\W^V7]Ô?\?PVszf{W'Tkxpáw=ðu>8¶¶6~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.41 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 80 lines of boot log: ------------------------------------------------- Connected to wand-quad console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-quad console)> hardreset (user:khilman) Reboot wand-quad Reboot: wand-quad ; phidget 2 3 : off, sleep, on U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: Wandboard DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial 0 => ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.37 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-dual console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-dual console)> hardreset (user:khilman) Reboot wand-dual Reboot: wand-dual ; phidget 2 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

mainline boot: 47 pass, 1 fail (v3.14-rc7-66-g774868c)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc7-66-g774868c Failed boot tests (console logs at the end) =========================================== legacy,dm365evm: FAIL: davinci_all_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.7 sec legacy,da850evm PASS: 0 min 14.5 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 54.2 sec am335x-boneblack PASS: 0 min 26.0 sec omap3-beagle-xm PASS: 1 min 1.0 sec legacy,3530beagle PASS: 1 min 27.0 sec omap4-panda PASS: 1 min 10.7 sec omap3-overo-tobi PASS: 0 min 23.5 sec am335x-bone PASS: 0 min 28.3 sec omap3-overo-storm-tobi PASS: 0 min 24.6 sec omap5-uevm PASS: 1 min 7.8 sec omap4-panda-es PASS: 1 min 13.1 sec legacy,3730storm PASS: 0 min 23.3 sec legacy,3530overo PASS: 0 min 21.5 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 47.8 sec sun7i-a20-cubieboard2 PASS: 0 min 14.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.9 sec imx6q-wandboard PASS: 0 min 17.5 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 2.8 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.2 sec sun4i-a10-cubieboard PASS: 0 min 21.1 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.2 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.1 sec tegra30-beaver PASS: 0 min 19.2 sec am335x-boneblack PASS: 0 min 23.8 sec omap3-beagle-xm PASS: 0 min 50.4 sec sun7i-a20-cubieboard2 PASS: 0 min 14.7 sec armada-370-mirabox PASS: 0 min 22.0 sec omap4-panda PASS: 0 min 53.7 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.1 sec sun4i-a10-cubieboard PASS: 0 min 14.3 sec bcm28155-ap PASS: 1 min 14.7 sec omap3-overo-tobi PASS: 0 min 22.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.5 sec am335x-bone PASS: 0 min 26.5 sec omap3-overo-storm-tobi PASS: 0 min 24.1 sec omap5-uevm PASS: 1 min 51.7 sec imx6q-wandboard PASS: 0 min 17.9 sec omap4-panda-es PASS: 0 min 49.2 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.7 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 31.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec davinci_all_defconfig --------------------- legacy,dm365evm FAIL: 0 min 31.4 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.0 sec armada-370-mirabox PASS: 0 min 20.1 sec Console logs for failures ========================= davinci_all_defconfig --------------------- legacy,dm365evm: FAIL: last 80 lines of boot log: ------------------------------------------------- Connected to dm365evm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(dm365evm console)> hardreset (user:khilman) Reboot dm365evm Reboot: dm365evm ; phidget 4 1 : ('off', 4, 'on') , sleep 4, ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

← Newer
1
...
5
6
7
8
9
10
11
...
23
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-kernel March 2014