linaro-kernel April 2014

linaro-kernel@lists.linaro.org

103 participants
204 discussions

mainline boot: 46 pass, 0 fail (v3.14-8380-g3c83e61)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-8380-g3c83e61 Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm 0 min 15.5 sec: PASS (Warnings: 1) legacy,da850evm 0 min 14.4 sec: PASS (Warnings: 1) omap2plus_defconfig ------------------- legacy,3730xm 0 min 55.2 sec: PASS am335x-boneblack 0 min 25.7 sec: PASS omap3-beagle-xm 1 min 1.4 sec: PASS legacy,3530beagle 0 min 35.7 sec: PASS (Warnings: 1) omap4-panda 1 min 11.9 sec: PASS omap3-overo-tobi 0 min 23.3 sec: PASS (Warnings: 1) am335x-bone 0 min 32.4 sec: PASS omap3-overo-storm-tobi 0 min 22.6 sec: PASS omap5-uevm 1 min 2.6 sec: PASS (Warnings: 1) omap4-panda-es 1 min 14.6 sec: PASS legacy,3730storm 0 min 20.5 sec: PASS legacy,3530overo 0 min 21.0 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 50.5 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 14.4 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 30.5 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.8 sec: PASS imx6q-wandboard 0 min 16.9 sec: PASS msm_defconfig ------------- qcom-apq8074-dragonboard 0 min 14.3 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.2 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 13.6 sec: PASS sun4i-a10-cubieboard 0 min 13.1 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.6 sec: PASS multi_v7_defconfig ------------------ tegra30-beaver 0 min 17.2 sec: PASS am335x-boneblack 0 min 23.6 sec: PASS omap3-beagle-xm 0 min 45.0 sec: PASS sun7i-a20-cubieboard2 0 min 14.5 sec: PASS armada-370-mirabox 0 min 22.0 sec: PASS omap4-panda 0 min 51.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.9 sec: PASS sun4i-a10-cubieboard 0 min 14.5 sec: PASS bcm28155-ap 0 min 27.6 sec: PASS omap3-overo-tobi 0 min 22.2 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.4 sec: PASS am335x-bone 0 min 26.2 sec: PASS omap3-overo-storm-tobi 0 min 21.1 sec: PASS omap5-uevm 1 min 47.1 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.3 sec: PASS omap4-panda-es 0 min 59.2 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.0 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.3 sec: PASS mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 0 min 21.9 sec: PASS armada-370-mirabox 0 min 20.1 sec: PASS

10 years, 1 month

arm-soc boot: 45 pass, 0 fail (v3.14-9179-gc2ef127)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-9179-gc2ef127 Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 47.6 sec: PASS am335x-boneblack 0 min 25.5 sec: PASS omap3-beagle-xm 1 min 1.3 sec: PASS legacy,3530beagle 0 min 36.0 sec: PASS (Warnings: 1) omap4-panda 1 min 13.1 sec: PASS omap3-overo-tobi 0 min 23.7 sec: PASS (Warnings: 1) am335x-bone 0 min 32.9 sec: PASS omap3-overo-storm-tobi 0 min 22.5 sec: PASS omap5-uevm 1 min 3.0 sec: PASS (Warnings: 1) omap4-panda-es 1 min 15.0 sec: PASS legacy,3730storm 0 min 23.4 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 48.4 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.0 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.9 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.2 sec: PASS imx6q-wandboard 0 min 17.2 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.5 sec: PASS sun4i-a10-cubieboard 0 min 18.2 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 22.9 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.4 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.7 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.4 sec: PASS tegra30-beaver 0 min 19.5 sec: PASS am335x-boneblack 0 min 23.9 sec: PASS omap3-beagle-xm 0 min 48.1 sec: PASS sun7i-a20-cubieboard2 0 min 12.5 sec: PASS armada-370-mirabox 0 min 22.3 sec: PASS omap4-panda 0 min 54.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 26.2 sec: PASS sun4i-a10-cubieboard 0 min 14.3 sec: PASS bcm28155-ap 0 min 27.2 sec: PASS omap3-overo-tobi 0 min 25.4 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.3 sec: PASS am335x-bone 0 min 27.1 sec: PASS omap3-overo-storm-tobi 0 min 21.4 sec: PASS omap5-uevm 1 min 47.9 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.4 sec: PASS omap4-panda-es 0 min 57.6 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.6 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.1 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.5 sec: PASS da850-evm 0 min 15.4 sec: PASS

10 years, 1 month

queue boot: 16 pass, 7 fail (v3.10.36)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.36 Failed boot tests (console logs at the end) =========================================== omap3-beagle-xm: DEAD: omap2plus_defconfig imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: OFFLINE: imx_v6_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-370-mirabox: DEAD: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig da850-evm: FAIL: davinci_all_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm 0 min 14.5 sec: PASS legacy,da850evm 0 min 13.9 sec: PASS omap2plus_defconfig ------------------- legacy,3730xm 0 min 55.0 sec: PASS omap3-beagle-xm 0 min 0.0 sec: DEAD legacy,3530beagle 0 min 57.6 sec: PASS omap4-panda 1 min 9.3 sec: PASS omap3-tobi 0 min 33.6 sec: PASS am335x-bone 0 min 26.6 sec: PASS omap4-panda-es 1 min 3.7 sec: PASS legacy,3730storm 0 min 23.4 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 42.3 sec: FAIL imx6dl-wandboard,wand-solo 0 min 31.4 sec: OFFLINE mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 0 min 21.4 sec: PASS armada-370-mirabox 0 min 19.6 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 28.9 sec: PASS multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 21.2 sec: FAIL armada-370-mirabox 0 min 0.0 sec: DEAD sun4i-a10-cubieboard 1 min 45.0 sec: FAIL sama5_defconfig --------------- sama5d35ek 0 min 17.0 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 16.4 sec: PASS da850-evm 0 min 40.8 sec: FAIL Console logs for failures ========================= omap2plus_defconfig ------------------- omap3-beagle-xm: DEAD: last 80 lines of boot log: ------------------------------------------------- DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0 *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Beagle xM Rev C No EEPROM on expansion board Die ID #0b5000029ff80000016842c910019004 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 1.800 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Peripheral mode controller at 480ab000 using PIO, IRQ 0 Net: usb_ether Hit any key to stop autoboot: 3 0 OMAP3 beagleboard.org # OMAP3 beagleboard.org # version version U-Boot 2013.04 (Jan 17 2014 - 10:48:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.2 OMAP3 beagleboard.org #setenv usbethaddr 2a:45:34:6d:b4:5d setenv usbethaddr 2a:45:34:6d:b4:5d OMAP3 beagleboard.org # setenv preboot "dcache off; usb start" # For USB net setenv preboot "dcache off; usb start" # For USB net OMAP3 beagleboard.org # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 OMAP3 beagleboard.org # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' OMAP3 beagleboard.org #if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi OMAP3 beagleboard.org # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org #dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.190 OMAP3 beagleboard.org # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org #if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # tftp 0x80200000 192.168.1.2:tmp/3730xm-M1ksw2/zImage tftp 0x80200000 192.168.1.2:tmp/3730xm-M1ksw2/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-M1ksw2/zImage'. Load address: 0x80200000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ############## 461.9 KiB/s done Bytes transferred = 4022136 (3d5f78 hex) OMAP3 beagleboard.org #tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: * imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => version version U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' =>if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi =>setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no =>dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.156 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 =>if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x18000000 192.168.1.2:tmp/wand-dual-ePRDWn/zImage tftp 0x18000000 192.168.1.2:tmp/wand-dual-ePRDWn/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-ePRDWn/zImage'. Load address: 0x18000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################### 1.5 MiB/s done Bytes transferred = 4207992 (403578 hex) => tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x20000000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x1f000000 192.168.1.2:tmp/wand-dual-ePRDWn/imx6dl-wandboard.dtb tftp 0x1f000000 192.168.1.2:tmp/wand-dual-ePRDWn/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-ePRDWn/imx6dl-wandboard.dtb'. Load address: 0x1f000000 Loading: *## 1.4 MiB/s done Bytes transferred = 18975 (4a1f hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 =>bootz 0x18000000 0x20000000 0x1f000000 bootz 0x18000000 0x20000000 0x1f000000 ## Loading init Ramdisk from Legacy Image at 20000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 1f000000 Booting using the fdt blob at 0x1f000000 Using Device Tree in place at 1f000000, end 1f007a1e Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.28 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: OFFLINE: last 80 lines of boot log: --------------------------------------------------------------- Connected to wand-solo console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-solo console)> hardreset (user:khilman) Reboot wand-solo Reboot: wand-solo ; phidget 2 2 : off, sleep, on U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) CPU: Freescale i.MX6SOLO rev1.1 at 792 MHz Reset cause: POR Board: Wandboard DRAM: 512 MiB WARNING: Caches not enabled MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default env 0 => ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.37 seconds. # PYBOOT: Result: OFFLINE multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Switching to clocksource armada_370_xp_clocksource bounce pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) armada-xp-pinctrl d0018000.pinctrl: registered pinctrl driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 17) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 18) is a 16550A sata_mv d00a0000.sata: slots 32 ports 2 scsi0 : sata_mv scsi1 : sata_mv ata1: SATA max UDMA/133 irq 24 ata2: SATA max UDMA/133 irq 24 usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) ata1: SATA link down (SStatus 0 SControl F300) ata2: SATA link down (SStatus 0 SControl F300) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.10.36 #1 [<c0013c0c>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0276480>] (panic+0xa0/0x1e8) [<c0276480>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c02721dc>] (kernel_init+0x8/0x158) [<c02721dc>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.36 #1 [<c0013c0c>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c001238c>] (handle_IPI+0x108/0x130) [<c001238c>] (handle_IPI+0x108/0x130) from [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) from [<c000dac0>] (__irq_svc+0x40/0x50) Exception stack(0xc0359f70 to 0xc0359fb8) 9f60: c1d5c6d8 00000000 000000ba 000000ba 9f80: c03604a8 c0358000 c036045c c0383c6c c027deb0 c0358000 c0383c6c c0358000 9fa0: 0000001f c0359fb8 c000f070 c004fa8c 60000113 ffffffff [<c000dac0>] (__irq_svc+0x40/0x50) from [<c004fa8c>] (cpu_startup_entry+0xfc/0x140) [<c004fa8c>] (cpu_startup_entry+0xfc/0x140) from [<c0328a3c>] (start_kernel+0x2c4/0x2d0) [<c0328a3c>] (start_kernel+0x2c4/0x2d0) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 21.22 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: DEAD: last 80 lines of boot log: ---------------------------------------------------- Connected to mirabox console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(mirabox console)> hardreset (user:khilman) Reboot mirabox Reboot: mirabox ; ip9258 1 1 : off, sleep, on sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) .text : 0xc0008000 - 0xc0327ac0 (3199 kB) .init : 0xc0328000 - 0xc0356780 ( 186 kB) .data : 0xc0358000 - 0xc0383d20 ( 176 kB) .bss : 0xc0383d20 - 0xc03b68ac ( 203 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. NR_IRQS:16 nr_irqs:16 16 sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms Console: colour dummy device 80x30 Calibrating delay loop... 669.28 BogoMIPS (lpj=3346432) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket -1, mpidr 0 Setting up static identity map for 0xc027be58 - 0xc027beb0 unable to find compatible sirf rstc node in dtb Brought up 1 CPUs SMP: Total of 1 processors activated (669.28 BogoMIPS). CPU: All CPU(s) started in SVC mode. pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations unable to find compatible sirf pwrc node in dtb Serial: AMBA PL011 UART driver bio: create slab <bio-0> at 0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 bounce pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 104.96 seconds. # PYBOOT: Result: FAIL davinci_all_defconfig --------------------- da850-evm: FAIL: last 80 lines of boot log: ------------------------------------------- Starting SPI Memory Copy... Valid magicnum, 0x55424CBB, found at offset 0x00010000. DONE Jumping to entry point at 0xC1080000. MMC: davinci: 0 SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB Net: DaVinci-EMAC Hit any key to stop autoboot: 3 0 U-Boot > U-Boot > version version U-Boot 2014.01-dirty (Feb 27 2014 - 15:12:48) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.52.20130913 U-Boot >setenv bootargs console=ttyS2,115200n8 debug earlyprintk setenv bootargs console=ttyS2,115200n8 debug earlyprintk U-Boot >if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot > if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot > setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot > dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.1.194 U-Boot > setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot > if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot > tftp 0xc0800000 192.168.1.2:tmp/da850evm-xqp607/zImage-dtb-gNhknO tftp 0xc0800000 192.168.1.2:tmp/da850evm-xqp607/zImage-dtb-gNhknO Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'tmp/da850evm-xqp607/zImage-dtb-gNhknO'. Load address: 0xc0800000 Loading: *################################################################# ################################################################# ######## 1.7 MiB/s done Bytes transferred = 2023756 (1ee14c hex) U-Boot > tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'buildroot.cpio.gz.uboot'. Load address: 0xc0c00000 Loading: *############################################ 1.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot >printenv bootargs printenv bootargs bootargs=console=ttyS2,115200n8 debug earlyprintk U-Boot > bootz 0xc0800000 0xc0c00000 bootz 0xc0800000 0xc0c00000 Kernel image @ 0xc0800000 [ 0x000000 - 0x1ec9f8 ] ## Loading init Ramdisk from Legacy Image at c0c00000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 40.83 seconds. # PYBOOT: Result: FAIL

10 years, 1 month

[PATCH 00/17] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle

by Daniel Lezcano

This patchset relies on the cpm_pm notifier to initiate the powerdown sequence operations from pm.c instead cpuidle.c. Thus the cpuidle driver is no longer dependent from arch specific code as everything is called from the pm.c file. The patchset applies on top of v3.14. Tested on exynos4: 4210 Tested on exynos5: 5250 Daniel Lezcano (17): ARM: exynos: cpuidle: Prevent forward declaration ARM: exynos: cpuidle: use cpuidle_register ARM: exynos: cpuidle: change function name prefix ARM: exynos: cpuidle: encapsulate register access inside a function ARM: exynos: cpuidle: Move some code inside the idle_finisher ARM: exynos: cpuidle: Fix S5P_WAKEUP_STAT call ARM: exynos: cpuidle: Use the cpu_pm notifier ARM: exynos: cpuidle: Move scu_enable in the cpu_pm notifier ARM: exynos: cpuidle: Remove ifdef for scu_enable ARM: exynos: cpuidle: Move exynos_set_wakeupmask in the cpu_pm notifier ARM: exynos: cpuidle: Move the power sequence call in the cpu_pm notifier ARM: exynos: cpuidle: Move S5P_CHECK_AFTR in a header ARM: exynos: cpuidle: Move clock setup to pm.c ARM: exynos: cpuidle: Move the boot vector in pm.c ARM: exynos: cpuidle: Pass the AFTR callback to the platform_data ARM: exynos: cpuidle: Move the driver to drivers/cpuidle directory ARM: exynos: config: Enable cpuidle arch/arm/configs/exynos_defconfig | 1 + arch/arm/mach-exynos/Makefile | 1 - arch/arm/mach-exynos/common.c | 5 +- arch/arm/mach-exynos/common.h | 1 + arch/arm/mach-exynos/cpuidle.c | 256 ------------------------------------- arch/arm/mach-exynos/pm.c | 191 ++++++++++++++++++++++----- arch/arm/mach-exynos/pmu.c | 6 + arch/arm/mach-exynos/regs-pmu.h | 1 + drivers/cpuidle/Kconfig.arm | 7 + drivers/cpuidle/Makefile | 1 + drivers/cpuidle/cpuidle-exynos.c | 102 +++++++++++++++ 11 files changed, 281 insertions(+), 291 deletions(-) delete mode 100644 arch/arm/mach-exynos/cpuidle.c create mode 100644 drivers/cpuidle/cpuidle-exynos.c -- 1.7.9.5

10 years, 1 month

queue boot: 34 pass, 10 fail (v3.13.9)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.13.9 Failed boot tests (console logs at the end) =========================================== omap5-uevm: FAIL: omap2plus_defconfig omap5-uevm: FAIL: multi_lpae_defconfig imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: multi_v7_defconfig omap5-uevm: FAIL: multi_v7_defconfig imx6q-wandboard: OFFLINE: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig da850-evm: FAIL: davinci_all_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm 0 min 15.3 sec: PASS (Warnings: 1) legacy,da850evm 0 min 14.4 sec: PASS (Warnings: 1) omap2plus_defconfig ------------------- legacy,3730xm 0 min 55.2 sec: PASS am335x-boneblack 0 min 25.5 sec: PASS omap3-beagle-xm 0 min 56.8 sec: PASS legacy,3530beagle 0 min 35.0 sec: PASS (Warnings: 1) omap4-panda 1 min 6.6 sec: PASS omap3-tobi 0 min 22.5 sec: PASS (Warnings: 1) am335x-bone 0 min 27.3 sec: PASS omap5-uevm 1 min 17.7 sec: FAIL omap4-panda-es 1 min 6.8 sec: PASS legacy,3730storm 0 min 23.9 sec: PASS legacy,3530overo 0 min 21.3 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 19.0 sec: FAIL sun7i-a20-cubieboard2 0 min 13.8 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.0 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 42.8 sec: FAIL imx6dl-wandboard,wand-solo 0 min 42.9 sec: FAIL imx6q-wandboard 0 min 40.9 sec: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 12.5 sec: PASS sun4i-a10-cubieboard 0 min 12.6 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.0 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 30.5 sec: PASS multi_v7_defconfig ------------------ tegra30-beaver 0 min 14.4 sec: PASS am335x-boneblack 0 min 22.5 sec: PASS omap3-beagle-xm 1 min 0.9 sec: PASS sun7i-a20-cubieboard2 0 min 13.6 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS omap4-panda 1 min 11.7 sec: PASS armada-xp-openblocks-ax3-4 0 min 22.6 sec: PASS sun4i-a10-cubieboard 0 min 21.2 sec: PASS bcm28155-ap 0 min 26.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 42.1 sec: FAIL omap3-tobi 0 min 23.7 sec: PASS (Warnings: 1) am335x-bone 0 min 23.9 sec: PASS omap5-uevm 1 min 18.2 sec: FAIL imx6q-wandboard 0 min 31.4 sec: OFFLINE omap4-panda-es 1 min 1.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 42.2 sec: FAIL sama5_defconfig --------------- sama5d35ek 0 min 17.3 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 16.4 sec: PASS da850-evm 0 min 40.7 sec: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 0 min 22.0 sec: PASS armada-370-mirabox 0 min 20.0 sec: PASS Console logs for failures ========================= omap2plus_defconfig ------------------- omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/102 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x88008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.200 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-TTfWml/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-TTfWml/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-TTfWml/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ############################## 417 KiB/s done Bytes transferred = 4242976 (40be20 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 86.9 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-TTfWml/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-TTfWml/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-TTfWml/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *T ## 2.9 KiB/s done Bytes transferred = 18174 (46fe hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x40be20 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f876fd Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 77.69 seconds. # PYBOOT: Result: FAIL multi_lpae_defconfig -------------------- omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/102 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x88008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.200 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-J5rkI9/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-J5rkI9/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-J5rkI9/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ####################################################### 369.1 KiB/s done Bytes transferred = 3667648 (37f6c0 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 118.2 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-J5rkI9/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-J5rkI9/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-J5rkI9/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *T ## 2 KiB/s done Bytes transferred = 18174 (46fe hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x37f6c0 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f876fd Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 78.99 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ version U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.156 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x18000000 192.168.1.2:tmp/wand-dual-VBFXET/zImage tftp 0x18000000 192.168.1.2:tmp/wand-dual-VBFXET/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-VBFXET/zImage'. Load address: 0x18000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############# 1.5 MiB/s done Bytes transferred = 4961208 (4bb3b8 hex) => tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x20000000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x1f000000 192.168.1.2:tmp/wand-dual-VBFXET/imx6dl-wandboard.dtb tftp 0x1f000000 192.168.1.2:tmp/wand-dual-VBFXET/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-VBFXET/imx6dl-wandboard.dtb'. Load address: 0x1f000000 Loading: *### 1.4 MiB/s done Bytes transferred = 32741 (7fe5 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 => bootz 0x18000000 0x20000000 0x1f000000 bootz 0x18000000 0x20000000 0x1f000000 ## Loading init Ramdisk from Legacy Image at 20000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 1f000000 Booting using the fdt blob at 0x1f000000 Using Device Tree in place at 1f000000, end 1f00afe4 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.75 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no =>dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.164 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x18000000 192.168.1.2:tmp/wand-solo-GTBLxv/zImage tftp 0x18000000 192.168.1.2:tmp/wand-solo-GTBLxv/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-GTBLxv/zImage'. Load address: 0x18000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############# 1.5 MiB/s done Bytes transferred = 4961208 (4bb3b8 hex) => tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x20000000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x1f000000 192.168.1.2:tmp/wand-solo-GTBLxv/imx6dl-wandboard.dtb tftp 0x1f000000 192.168.1.2:tmp/wand-solo-GTBLxv/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-GTBLxv/imx6dl-wandboard.dtb'. Load address: 0x1f000000 Loading: *### 1.4 MiB/s done Bytes transferred = 32741 (7fe5 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 => bootz 0x18000000 0x20000000 0x1f000000 bootz 0x18000000 0x20000000 0x1f000000 ## Loading init Ramdisk from Legacy Image at 20000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 1f000000 Booting using the fdt blob at 0x1f000000 Using Device Tree in place at 1f000000, end 1f00afe4 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.90 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 80 lines of boot log: ------------------------------------------------- U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 => setenv bootargs console=ttymxc0,115200 setenv bootargs console=ttymxc0,115200 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.163 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x18000000 192.168.1.2:tmp/wand-quad-roRbqK/zImage tftp 0x18000000 192.168.1.2:tmp/wand-quad-roRbqK/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-roRbqK/zImage'. Load address: 0x18000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############# 2.7 MiB/s done Bytes transferred = 4961208 (4bb3b8 hex) =>tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x20000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x1f000000 192.168.1.2:tmp/wand-quad-roRbqK/imx6q-wandboard.dtb tftp 0x1f000000 192.168.1.2:tmp/wand-quad-roRbqK/imx6q-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-roRbqK/imx6q-wandboard.dtb'. Load address: 0x1f000000 Loading: *### 2.5 MiB/s done Bytes transferred = 34380 (864c hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0:::none:192.168.1.254 => bootz 0x18000000 0x20000000 0x1f000000 bootz 0x18000000 0x20000000 0x1f000000 Kernel image @ 0x18000000 [ 0x000000 - 0x4bb3b8 ] ## Loading init Ramdisk from Legacy Image at 20000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 1f000000 Booting using the fdt blob at 0x1f000000 Using Device Tree in place at 1f000000, end 1f00b64b Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 40.94 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => => version version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.164 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x18000000 192.168.1.2:tmp/wand-solo-NC1Ftw/zImage tftp 0x18000000 192.168.1.2:tmp/wand-solo-NC1Ftw/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-NC1Ftw/zImage'. Load address: 0x18000000 Loading: *################################################################# ################################################################# ################################################################# ###################################################### 1.5 MiB/s done Bytes transferred = 3646496 (37a420 hex) => tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x20000000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x1f000000 192.168.1.2:tmp/wand-solo-NC1Ftw/imx6dl-wandboard.dtb tftp 0x1f000000 192.168.1.2:tmp/wand-solo-NC1Ftw/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-NC1Ftw/imx6dl-wandboard.dtb'. Load address: 0x1f000000 Loading: *### 1.4 MiB/s done Bytes transferred = 32741 (7fe5 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 => bootz 0x18000000 0x20000000 0x1f000000 bootz 0x18000000 0x20000000 0x1f000000 ## Loading init Ramdisk from Legacy Image at 20000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 1f000000 Booting using the fdt blob at 0x1f000000 Using Device Tree in place at 1f000000, end 1f00afe4 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.11 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/102 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.200 U-Boot#setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-hymILI/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-hymILI/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-hymILI/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ################################################################# ################################################################# ################################################################# ###################################################### 368.2 KiB/s done Bytes transferred = 3646496 (37a420 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 93.8 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-hymILI/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-hymILI/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-hymILI/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *T ## 2 KiB/s done Bytes transferred = 18174 (46fe hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x37a420 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f876fd Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 78.17 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: OFFLINE: last 80 lines of boot log: ---------------------------------------------------- Connected to wand-quad console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-quad console)> hardreset (user:khilman) Reboot wand-quad Reboot: wand-quad ; phidget 2 3 : off, sleep, on U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: Wandboard DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial 0 => ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => => version version U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.156 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x18000000 192.168.1.2:tmp/wand-dual-hydvF4/zImage tftp 0x18000000 192.168.1.2:tmp/wand-dual-hydvF4/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-hydvF4/zImage'. Load address: 0x18000000 Loading: *################################################################# ################################################################# ################################################################# ###################################################### 1.5 MiB/s done Bytes transferred = 3646496 (37a420 hex) => tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x20000000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x20000000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x1f000000 192.168.1.2:tmp/wand-dual-hydvF4/imx6dl-wandboard.dtb tftp 0x1f000000 192.168.1.2:tmp/wand-dual-hydvF4/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-hydvF4/imx6dl-wandboard.dtb'. Load address: 0x1f000000 Loading: *### 1.4 MiB/s done Bytes transferred = 32741 (7fe5 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 => bootz 0x18000000 0x20000000 0x1f000000 bootz 0x18000000 0x20000000 0x1f000000 ## Loading init Ramdisk from Legacy Image at 20000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 1f000000 Booting using the fdt blob at 0x1f000000 Using Device Tree in place at 1f000000, end 1f00afe4 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.20 seconds. # PYBOOT: Result: FAIL davinci_all_defconfig --------------------- da850-evm: FAIL: last 80 lines of boot log: ------------------------------------------- Starting SPI Memory Copy... Valid magicnum, 0x55424CBB, found at offset 0x00010000. DONE Jumping to entry point at 0xC1080000. MMC: davinci: 0 SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB Net: DaVinci-EMAC Hit any key to stop autoboot: 3 0 U-Boot > U-Boot > version version U-Boot 2014.01-dirty (Feb 27 2014 - 15:12:48) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.52.20130913 U-Boot >setenv bootargs console=ttyS2,115200n8 debug earlyprintk setenv bootargs console=ttyS2,115200n8 debug earlyprintk U-Boot > if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot > if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot > setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot > dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.1.194 U-Boot >setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot > if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot > tftp 0xc0800000 192.168.1.2:tmp/da850evm-6EZMHd/zImage-dtb-RdQpFW tftp 0xc0800000 192.168.1.2:tmp/da850evm-6EZMHd/zImage-dtb-RdQpFW Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'tmp/da850evm-6EZMHd/zImage-dtb-RdQpFW'. Load address: 0xc0800000 Loading: *################################################################# ################################################################# ############## 1.7 MiB/s done Bytes transferred = 2108905 (202de9 hex) U-Boot > tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'buildroot.cpio.gz.uboot'. Load address: 0xc0c00000 Loading: *############################################ 1.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot > printenv bootargs printenv bootargs bootargs=console=ttyS2,115200n8 debug earlyprintk U-Boot > bootz 0xc0800000 0xc0c00000 bootz 0xc0800000 0xc0c00000 Kernel image @ 0xc0800000 [ 0x000000 - 0x2013e0 ] ## Loading init Ramdisk from Legacy Image at c0c00000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 40.73 seconds. # PYBOOT: Result: FAIL

10 years, 1 month

mainline boot: 46 pass, 0 fail (v3.14-7952-g4a4389a)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-7952-g4a4389a Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm 0 min 15.3 sec: PASS (Warnings: 1) legacy,da850evm 0 min 14.6 sec: PASS (Warnings: 1) omap2plus_defconfig ------------------- legacy,3730xm 0 min 56.0 sec: PASS am335x-boneblack 0 min 25.5 sec: PASS omap3-beagle-xm 0 min 58.9 sec: PASS legacy,3530beagle 0 min 40.8 sec: PASS (Warnings: 1) omap4-panda 1 min 9.9 sec: PASS omap3-overo-tobi 0 min 22.8 sec: PASS (Warnings: 1) am335x-bone 0 min 27.4 sec: PASS omap3-overo-storm-tobi 0 min 25.4 sec: PASS omap5-uevm 1 min 1.5 sec: PASS (Warnings: 1) omap4-panda-es 1 min 14.6 sec: PASS legacy,3730storm 0 min 23.5 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 48.9 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 14.4 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.1 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 19.0 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.1 sec: PASS imx6q-wandboard 0 min 17.2 sec: PASS msm_defconfig ------------- qcom-apq8074-dragonboard 0 min 15.6 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 22.7 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 13.0 sec: PASS sun4i-a10-cubieboard 0 min 17.8 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.7 sec: PASS multi_v7_defconfig ------------------ tegra30-beaver 0 min 17.0 sec: PASS am335x-boneblack 0 min 24.3 sec: PASS omap3-beagle-xm 0 min 50.9 sec: PASS sun7i-a20-cubieboard2 0 min 14.3 sec: PASS armada-370-mirabox 0 min 22.1 sec: PASS omap4-panda 0 min 55.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.8 sec: PASS sun4i-a10-cubieboard 0 min 18.8 sec: PASS bcm28155-ap 0 min 27.4 sec: PASS omap3-overo-tobi 0 min 22.0 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.0 sec: PASS am335x-bone 0 min 26.2 sec: PASS omap3-overo-storm-tobi 0 min 24.6 sec: PASS omap5-uevm 1 min 44.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.6 sec: PASS omap4-panda-es 0 min 53.3 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.1 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.2 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.2 sec: PASS mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 0 min 22.0 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS

10 years, 1 month

mainline boot: 46 pass, 0 fail (v3.14-7903-g877f075)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-7903-g877f075 Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm 0 min 15.3 sec: PASS (Warnings: 1) legacy,da850evm 0 min 14.5 sec: PASS (Warnings: 1) omap2plus_defconfig ------------------- legacy,3730xm 0 min 54.1 sec: PASS am335x-boneblack 0 min 25.4 sec: PASS omap3-beagle-xm 1 min 1.9 sec: PASS legacy,3530beagle 0 min 35.6 sec: PASS (Warnings: 1) omap4-panda 1 min 13.5 sec: PASS omap3-overo-tobi 0 min 23.1 sec: PASS (Warnings: 1) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 24.7 sec: PASS omap5-uevm 0 min 59.0 sec: PASS (Warnings: 1) omap4-panda-es 1 min 12.3 sec: PASS legacy,3730storm 0 min 20.4 sec: PASS legacy,3530overo 0 min 21.1 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 51.5 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 14.6 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 18.4 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.9 sec: PASS imx6q-wandboard 0 min 17.1 sec: PASS msm_defconfig ------------- qcom-apq8074-dragonboard 0 min 16.0 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 25.4 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 13.1 sec: PASS sun4i-a10-cubieboard 0 min 20.2 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 28.6 sec: PASS multi_v7_defconfig ------------------ tegra30-beaver 0 min 17.0 sec: PASS am335x-boneblack 0 min 23.6 sec: PASS omap3-beagle-xm 0 min 46.2 sec: PASS sun7i-a20-cubieboard2 0 min 14.3 sec: PASS armada-370-mirabox 0 min 22.0 sec: PASS omap4-panda 0 min 56.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.0 sec: PASS sun4i-a10-cubieboard 0 min 18.8 sec: PASS bcm28155-ap 0 min 27.9 sec: PASS omap3-overo-tobi 0 min 21.8 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 31.0 sec: PASS omap3-overo-storm-tobi 0 min 23.8 sec: PASS omap5-uevm 1 min 49.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.1 sec: PASS omap4-panda-es 0 min 58.7 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.2 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.1 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.3 sec: PASS mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 0 min 22.1 sec: PASS armada-370-mirabox 0 min 21.4 sec: PASS

10 years, 1 month

mainline boot: 46 pass, 0 fail (v3.14-7458-g32d01dc)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-7458-g32d01dc Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm 0 min 15.4 sec: PASS (Warnings: 1) legacy,da850evm 0 min 14.6 sec: PASS (Warnings: 1) omap2plus_defconfig ------------------- legacy,3730xm 0 min 52.2 sec: PASS am335x-boneblack 0 min 25.8 sec: PASS omap3-beagle-xm 1 min 1.2 sec: PASS legacy,3530beagle 0 min 35.8 sec: PASS (Warnings: 1) omap4-panda 1 min 12.9 sec: PASS omap3-overo-tobi 0 min 23.1 sec: PASS (Warnings: 1) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 22.5 sec: PASS omap5-uevm 1 min 6.8 sec: PASS (Warnings: 1) omap4-panda-es 1 min 9.7 sec: PASS legacy,3730storm 0 min 23.2 sec: PASS legacy,3530overo 0 min 21.1 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 53.9 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 14.5 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.8 sec: PASS imx6q-wandboard 0 min 17.3 sec: PASS msm_defconfig ------------- qcom-apq8074-dragonboard 0 min 15.4 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.0 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 13.0 sec: PASS sun4i-a10-cubieboard 0 min 12.8 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.8 sec: PASS multi_v7_defconfig ------------------ tegra30-beaver 0 min 17.1 sec: PASS am335x-boneblack 0 min 23.9 sec: PASS omap3-beagle-xm 0 min 50.6 sec: PASS sun7i-a20-cubieboard2 0 min 14.4 sec: PASS armada-370-mirabox 0 min 22.0 sec: PASS omap4-panda 0 min 58.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.8 sec: PASS sun4i-a10-cubieboard 0 min 18.8 sec: PASS bcm28155-ap 0 min 27.1 sec: PASS omap3-overo-tobi 0 min 21.9 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.0 sec: PASS am335x-bone 0 min 26.2 sec: PASS omap3-overo-storm-tobi 0 min 24.2 sec: PASS omap5-uevm 1 min 51.9 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.5 sec: PASS omap4-panda-es 0 min 59.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.2 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.3 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.2 sec: PASS mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 0 min 22.0 sec: PASS armada-370-mirabox 0 min 20.1 sec: PASS

10 years, 1 month

arm-soc boot: 45 pass, 0 fail (v3.14-1228-g247376c)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-1228-g247376c Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 51.8 sec: PASS am335x-boneblack 0 min 25.8 sec: PASS omap3-beagle-xm 1 min 2.4 sec: PASS legacy,3530beagle 0 min 38.0 sec: PASS (Warnings: 1) omap4-panda 1 min 11.7 sec: PASS omap3-overo-tobi 0 min 23.2 sec: PASS (Warnings: 1) am335x-bone 0 min 27.2 sec: PASS omap3-overo-storm-tobi 0 min 25.6 sec: PASS omap5-uevm 0 min 57.1 sec: PASS (Warnings: 1) omap4-panda-es 1 min 8.4 sec: PASS legacy,3730storm 0 min 23.8 sec: PASS legacy,3530overo 0 min 21.3 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 42.0 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.3 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.1 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.0 sec: PASS imx6q-wandboard 0 min 17.3 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.6 sec: PASS sun4i-a10-cubieboard 0 min 12.6 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.0 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.4 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 30.1 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.8 sec: PASS tegra30-beaver 0 min 17.0 sec: PASS am335x-boneblack 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 52.7 sec: PASS sun7i-a20-cubieboard2 0 min 12.2 sec: PASS armada-370-mirabox 0 min 22.2 sec: PASS omap4-panda 0 min 55.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.0 sec: PASS sun4i-a10-cubieboard 0 min 19.4 sec: PASS bcm28155-ap 0 min 27.1 sec: PASS omap3-overo-tobi 0 min 22.2 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.4 sec: PASS am335x-bone 0 min 26.4 sec: PASS omap3-overo-storm-tobi 0 min 21.5 sec: PASS omap5-uevm 1 min 47.3 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.2 sec: PASS omap4-panda-es 0 min 59.2 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.2 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.2 sec: PASS da850-evm 0 min 15.1 sec: PASS

10 years, 1 month

arm-soc boot: 46 pass, 1 fail (v3.14-rc5-1349-g4af4fbe)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc5-1349-g4af4fbe Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 56.3 sec: PASS am335x-boneblack 0 min 25.9 sec: PASS omap3-beagle-xm 0 min 59.4 sec: PASS legacy,3530beagle 0 min 36.2 sec: PASS (Warnings: 1) omap4-panda 1 min 13.1 sec: PASS omap3-overo-tobi 0 min 23.3 sec: PASS (Warnings: 1) am335x-bone 0 min 27.5 sec: PASS omap3-overo-storm-tobi 0 min 25.4 sec: PASS omap5-uevm 1 min 2.2 sec: PASS (Warnings: 1) omap4-panda-es 1 min 8.8 sec: PASS legacy,3730storm 0 min 20.5 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 53.0 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.3 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.0 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.9 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.0 sec: PASS imx6q-wandboard 0 min 17.1 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.7 sec: PASS sun4i-a10-cubieboard 0 min 12.9 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.1 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.4 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 30.0 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.8 sec: PASS ste-snowball 0 min 50.8 sec: FAIL tegra30-beaver 0 min 17.0 sec: PASS am335x-boneblack 0 min 23.6 sec: PASS omap3-beagle-xm 0 min 52.9 sec: PASS sun7i-a20-cubieboard2 0 min 12.0 sec: PASS armada-370-mirabox 0 min 22.5 sec: PASS omap4-panda 0 min 56.0 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS sun4i-a10-cubieboard 0 min 19.1 sec: PASS bcm28155-ap 0 min 27.4 sec: PASS omap3-overo-tobi 0 min 25.2 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 26.5 sec: PASS omap3-overo-storm-tobi 0 min 21.6 sec: PASS omap5-uevm 1 min 47.1 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.4 sec: PASS omap4-panda-es 0 min 50.8 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.1 sec: PASS u8500_defconfig --------------- ste-snowball 0 min 30.3 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.1 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 16.9 sec: PASS da850-evm 0 min 15.2 sec: PASS Console logs for failures ========================= multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- U-Boot 2009.11 (sept. 19 2011 - 17:03:11) CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $ dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-4M7O_s/tmpHKFqOC-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-4M7O_s/tmpHKFqOC-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-4M7O_s/tmpHKFqOC-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4619817 (467e29 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4619753 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 50.76 seconds. # PYBOOT: Result: FAIL

10 years, 1 month

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-kernel April 2014