linaro-kernel

linaro-kernel@lists.linaro.org

10095 discussions

queue boot: 13 pass, 2 fail (v3.10.26-3-g81eeea6)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.26-3-g81eeea6 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 1 min 0.3 sec am335x-bone PASS: 0 min 26.6 sec omap4-panda PASS: 1 min 7.9 sec omap4-panda-es PASS: 1 min 4.7 sec omap3-tobi,3730storm PASS: 0 min 35.9 sec omap3-tobi,3530overo PASS: 0 min 33.7 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 21.7 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.6 sec armada-370-mirabox PASS: 0 min 19.6 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.6 sec multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 FAIL: 0 min 20.0 sec armada-370-mirabox FAIL: 0 min 17.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 16.4 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0275d00>] (panic+0xa0/0x1e8) [<c0275d00>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0271a60>] (kernel_init+0x8/0x158) [<c0271a60>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.26-00003-g81eeea6 #1 [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c001236c>] (handle_IPI+0x108/0x130) [<c001236c>] (handle_IPI+0x108/0x130) from [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) from [<c000dac0>] (__irq_svc+0x40/0x50) Exception stack(0xc0359f70 to 0xc0359fb8) 9f60: c1d5b6d8 00000000 000000c2 000000c2 9f80: c03604a8 c0358000 c036045c c0383b6c c027debc c0358000 c0383b6c c0358000 9fa0: 0000001f c0359fb8 c000f070 c004f970 60000113 ffffffff [<c000dac0>] (__irq_svc+0x40/0x50) from [<c004f970>] (cpu_startup_entry+0xfc/0x140) [<c004f970>] (cpu_startup_entry+0xfc/0x140) from [<c0328a3c>] (start_kernel+0x2c4/0x2d0) [<c0328a3c>] (start_kernel+0x2c4/0x2d0) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 20.04 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.26-00003-g81eeea6 #1 [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0275d00>] (panic+0xa0/0x1e8) [<c0275d00>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0271a60>] (kernel_init+0x8/0x158) [<c0271a60>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 17.94 seconds. # PYBOOT: Result: FAIL

12 years

queue boot: 31 pass, 0 fail (v3.12.7)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.12.7 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 27.4 sec omap3-beagle-xm PASS: 0 min 56.3 sec am335x-bone PASS: 0 min 26.1 sec omap4-panda PASS: 1 min 3.9 sec omap4-panda-es PASS: 1 min 4.2 sec omap3-tobi,3730storm PASS: 0 min 20.4 sec omap3-tobi,3530overo PASS: 0 min 21.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec imx6q-wandboard PASS: 0 min 14.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.0 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.9 sec tegra30-beaver PASS: 0 min 16.2 sec am335x-boneblack PASS: 0 min 34.6 sec omap3-beagle-xm PASS: 0 min 59.4 sec sun7i-a20-cubieboard2 PASS: 0 min 13.0 sec armada-370-mirabox PASS: 0 min 20.7 sec omap4-panda PASS: 1 min 7.0 sec omap4-panda-es PASS: 1 min 0.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec am335x-bone PASS: 0 min 33.3 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 22.3 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-tobi,3530overo PASS: 0 min 20.1 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 36.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec

12 years

[PATCH] ARM: traps: fix opcode endianness when read from user memory

by Taras Kondratiuk

Currently code has an inverted logic: opcode from user memory is swapped to a proper endianness only in case of read error. While normally opcode should be swapped only if it was read correctly from user memory. Signed-off-by: Ben Dooks <ben.dooks(a)codethink.co.uk> Signed-off-by: Taras Kondratiuk <taras.kondratiuk(a)linaro.org> --- arch/arm/kernel/traps.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 7940241..36a844e 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -425,9 +425,10 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) instr2 = __mem_to_opcode_thumb16(instr2); instr = __opcode_thumb32_compose(instr, instr2); } - } else if (get_user(instr, (u32 __user *)pc)) { + } else { + if (get_user(instr, (u32 __user *)pc)) + goto die_sig; instr = __mem_to_opcode_arm(instr); - goto die_sig; } if (call_undef_hook(regs, instr) == 0) -- 1.7.9.5

12 years

[PATCH 1/4] arm64: topology: Implement basic CPU topology support

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> Add basic CPU topology support to arm64, based on the existing pre-v8 code and some work done by Mark Hambleton. This patch does not implement any topology discovery support since that should be based on information from firmware, it merely implements the scaffolding for integration of topology support in the architecture. The goal is to separate the architecture hookup for providing topology information from the DT parsing in order to ease review and avoid blocking the architecture code (which will be built on by other work) with the DT code review by providing something something simple and basic. A following patch will implement support for parsing the DT topology bindings for ARM, similar patches will be needed for ACPI. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- arch/arm64/Kconfig | 24 +++++++++++ arch/arm64/include/asm/topology.h | 39 +++++++++++++++++ arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/smp.c | 12 ++++++ arch/arm64/kernel/topology.c | 91 +++++++++++++++++++++++++++++++++++++++ 5 files changed, 167 insertions(+) create mode 100644 arch/arm64/include/asm/topology.h create mode 100644 arch/arm64/kernel/topology.c diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 249acb9da4e3..a53514cdf39c 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -162,6 +162,30 @@ config SMP If you don't know what to do here, say N. +config ARM_CPU_TOPOLOGY + bool "Support CPU topology definition" + depends on SMP + default y + help + Support CPU topology definition, based on configuration + provided by the firmware. + +config SCHED_MC + bool "Multi-core scheduler support" + depends on ARM_CPU_TOPOLOGY + help + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + +config SCHED_SMT + bool "SMT scheduler support" + depends on ARM_CPU_TOPOLOGY + help + Improves the CPU scheduler's decision making when dealing with + MultiThreading at a cost of slightly increased overhead in some + places. If unsure say N here. + config NR_CPUS int "Maximum number of CPUs (2-32)" range 2 32 diff --git a/arch/arm64/include/asm/topology.h b/arch/arm64/include/asm/topology.h new file mode 100644 index 000000000000..58b8b84adcd2 --- /dev/null +++ b/arch/arm64/include/asm/topology.h @@ -0,0 +1,39 @@ +#ifndef _ASM_ARM_TOPOLOGY_H +#define _ASM_ARM_TOPOLOGY_H + +#ifdef CONFIG_ARM_CPU_TOPOLOGY + +#include <linux/cpumask.h> + +struct cputopo_arm { + int thread_id; + int core_id; + int socket_id; + cpumask_t thread_sibling; + cpumask_t core_sibling; +}; + +extern struct cputopo_arm cpu_topology[NR_CPUS]; + +#define topology_physical_package_id(cpu) (cpu_topology[cpu].socket_id) +#define topology_core_id(cpu) (cpu_topology[cpu].core_id) +#define topology_core_cpumask(cpu) (&cpu_topology[cpu].core_sibling) +#define topology_thread_cpumask(cpu) (&cpu_topology[cpu].thread_sibling) + +#define mc_capable() (cpu_topology[0].socket_id != -1) +#define smt_capable() (cpu_topology[0].thread_id != -1) + +void init_cpu_topology(void); +void store_cpu_topology(unsigned int cpuid); +const struct cpumask *cpu_coregroup_mask(int cpu); + +#else + +static inline void init_cpu_topology(void) { } +static inline void store_cpu_topology(unsigned int cpuid) { } + +#endif + +#include <asm-generic/topology.h> + +#endif /* _ASM_ARM_TOPOLOGY_H */ diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 1cd339d5037b..b2fe6ba97080 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -19,6 +19,7 @@ arm64-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)+= hw_breakpoint.o arm64-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o arm64-obj-$(CONFIG_ARM64_CPU_SUSPEND) += sleep.o suspend.o +arm64-obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o obj-y += $(arm64-obj-y) vdso/ obj-m += $(arm64-obj-m) diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index 1b7617ab499b..40e20efc13e6 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -114,6 +114,11 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle) return ret; } +static void __cpuinit smp_store_cpu_info(unsigned int cpuid) +{ + store_cpu_topology(cpuid); +} + /* * This is the secondary CPU boot entry. We're using this CPUs * idle thread stack, but a set of temporary page tables. @@ -152,6 +157,8 @@ asmlinkage void secondary_start_kernel(void) */ notify_cpu_starting(cpu); + smp_store_cpu_info(cpu); + /* * OK, now it's safe to let the boot CPU continue. Wait for * the CPU migration code to notice that the CPU is online @@ -391,6 +398,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus) int err; unsigned int cpu, ncores = num_possible_cpus(); + init_cpu_topology(); + + smp_store_cpu_info(smp_processor_id()); + + /* * are we trying to boot more cores than exist? */ diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c new file mode 100644 index 000000000000..20eef01a4707 --- /dev/null +++ b/arch/arm64/kernel/topology.c @@ -0,0 +1,91 @@ +/* + * arch/arm64/kernel/topology.c + * + * Copyright (C) 2011,2013 Linaro Limited. + * + * Based on the arm32 version written by Vincent Guittot in turn based on + * arch/sh/kernel/topology.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/cpu.h> +#include <linux/cpumask.h> +#include <linux/init.h> +#include <linux/percpu.h> +#include <linux/node.h> +#include <linux/nodemask.h> +#include <linux/sched.h> + +#include <asm/topology.h> + +/* + * cpu topology table + */ +struct cputopo_arm cpu_topology[NR_CPUS]; +EXPORT_SYMBOL_GPL(cpu_topology); + +const struct cpumask *cpu_coregroup_mask(int cpu) +{ + return &cpu_topology[cpu].core_sibling; +} + +static void update_siblings_masks(unsigned int cpuid) +{ + struct cputopo_arm *cpu_topo, *cpuid_topo = &cpu_topology[cpuid]; + int cpu; + + /* update core and thread sibling masks */ + for_each_possible_cpu(cpu) { + cpu_topo = &cpu_topology[cpu]; + + if (cpuid_topo->socket_id != cpu_topo->socket_id) + continue; + + cpumask_set_cpu(cpuid, &cpu_topo->core_sibling); + if (cpu != cpuid) + cpumask_set_cpu(cpu, &cpuid_topo->core_sibling); + + if (cpuid_topo->core_id != cpu_topo->core_id) + continue; + + cpumask_set_cpu(cpuid, &cpu_topo->thread_sibling); + if (cpu != cpuid) + cpumask_set_cpu(cpu, &cpuid_topo->thread_sibling); + } + smp_wmb(); +} + +void store_cpu_topology(unsigned int cpuid) +{ + struct cputopo_arm *cpuid_topo = &cpu_topology[cpuid]; + + /* DT should have been parsed by the time we get here */ + if (cpuid_topo->core_id == -1) + pr_info("CPU%u: No topology information configured\n", cpuid); + else + update_siblings_masks(cpuid); +} + +/* + * init_cpu_topology is called at boot when only one cpu is running + * which prevent simultaneous write access to cpu_topology array + */ +void __init init_cpu_topology(void) +{ + unsigned int cpu; + + /* init core mask and power*/ + for_each_possible_cpu(cpu) { + struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]); + + cpu_topo->thread_id = -1; + cpu_topo->core_id = -1; + cpu_topo->socket_id = -1; + cpumask_clear(&cpu_topo->core_sibling); + cpumask_clear(&cpu_topo->thread_sibling); + } + smp_wmb(); +} -- 1.8.5.2

12 years

[PATCH V3 Resend] cpufreq: create cpufreq_generic_get() routine

by Viresh Kumar

CPUFreq drivers that use clock frameworks interface,i.e. clk_get_rate(), to get CPUs clk rate, has similar sort of code used for most of them. This patch adds a generic ->get() which will do the same thing for them. All those drivers are required to now is to set .get to cpufreq_generic_get() and set their clk pointer in policy->clk during ->init(). Acked-by: Hans-Christian Egtvedt <egtvedt(a)samfundet.no> Acked-by: Shawn Guo <shawn.guo(a)linaro.org> Acked-by: Linus Walleij <linus.walleij(a)linaro.org> Acked-by: Shawn Guo <shawn.guo(a)linaro.org> Acked-by: Stephen Warren <swarren(a)nvidia.com> Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> --- Rafael, V2->V3: As asked by you earlier, I have merged all 23 patches here as they had common log and were touching separate drivers. This is already acked by many people. Please see if looks okay for 3.14. drivers/cpufreq/at32ap-cpufreq.c | 17 ++++--------- drivers/cpufreq/cpufreq-cpu0.c | 8 ++---- drivers/cpufreq/cpufreq.c | 26 ++++++++++++++----- drivers/cpufreq/davinci-cpufreq.c | 14 +++------- drivers/cpufreq/dbx500-cpufreq.c | 19 ++------------ drivers/cpufreq/exynos-cpufreq.c | 10 +++----- drivers/cpufreq/exynos5440-cpufreq.c | 33 ++++++++++-------------- drivers/cpufreq/imx6q-cpufreq.c | 8 ++---- drivers/cpufreq/loongson2_cpufreq.c | 15 ++++------- drivers/cpufreq/omap-cpufreq.c | 32 ++++++++--------------- drivers/cpufreq/ppc-corenet-cpufreq.c | 17 +++---------- drivers/cpufreq/s3c24xx-cpufreq.c | 10 +++----- drivers/cpufreq/s3c64xx-cpufreq.c | 33 +++++++++--------------- drivers/cpufreq/s5pv210-cpufreq.c | 21 +++++---------- drivers/cpufreq/spear-cpufreq.c | 8 ++---- drivers/cpufreq/tegra-cpufreq.c | 48 ++++++----------------------------- drivers/cpufreq/unicore2-cpufreq.c | 19 +++++--------- include/linux/cpufreq.h | 3 +++ 18 files changed, 112 insertions(+), 229 deletions(-) diff --git a/drivers/cpufreq/at32ap-cpufreq.c b/drivers/cpufreq/at32ap-cpufreq.c index 7c03dd8..a1c79f5 100644 --- a/drivers/cpufreq/at32ap-cpufreq.c +++ b/drivers/cpufreq/at32ap-cpufreq.c @@ -21,17 +21,8 @@ #include <linux/export.h> #include <linux/slab.h> -static struct clk *cpuclk; static struct cpufreq_frequency_table *freq_table; -static unsigned int at32_get_speed(unsigned int cpu) -{ - /* No SMP support */ - if (cpu) - return 0; - return (unsigned int)((clk_get_rate(cpuclk) + 500) / 1000); -} - static unsigned int ref_freq; static unsigned long loops_per_jiffy_ref; @@ -39,7 +30,7 @@ static int at32_set_target(struct cpufreq_policy *policy, unsigned int index) { unsigned int old_freq, new_freq; - old_freq = at32_get_speed(0); + old_freq = policy->cur; new_freq = freq_table[index].frequency; if (!ref_freq) { @@ -50,7 +41,7 @@ static int at32_set_target(struct cpufreq_policy *policy, unsigned int index) if (old_freq < new_freq) boot_cpu_data.loops_per_jiffy = cpufreq_scale( loops_per_jiffy_ref, ref_freq, new_freq); - clk_set_rate(cpuclk, new_freq * 1000); + clk_set_rate(policy->clk, new_freq * 1000); if (new_freq < old_freq) boot_cpu_data.loops_per_jiffy = cpufreq_scale( loops_per_jiffy_ref, ref_freq, new_freq); @@ -61,6 +52,7 @@ static int at32_set_target(struct cpufreq_policy *policy, unsigned int index) static int at32_cpufreq_driver_init(struct cpufreq_policy *policy) { unsigned int frequency, rate, min_freq; + static struct clk *cpuclk; int retval, steps, i; if (policy->cpu != 0) @@ -103,6 +95,7 @@ static int at32_cpufreq_driver_init(struct cpufreq_policy *policy) frequency /= 2; } + policy->clk = cpuclk; freq_table[steps - 1].frequency = CPUFREQ_TABLE_END; retval = cpufreq_table_validate_and_show(policy, freq_table); @@ -123,7 +116,7 @@ static struct cpufreq_driver at32_driver = { .init = at32_cpufreq_driver_init, .verify = cpufreq_generic_frequency_table_verify, .target_index = at32_set_target, - .get = at32_get_speed, + .get = cpufreq_generic_get, .flags = CPUFREQ_STICKY, }; diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index 0faf756..bb7b308 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -30,11 +30,6 @@ static struct clk *cpu_clk; static struct regulator *cpu_reg; static struct cpufreq_frequency_table *freq_table; -static unsigned int cpu0_get_speed(unsigned int cpu) -{ - return clk_get_rate(cpu_clk) / 1000; -} - static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index) { struct dev_pm_opp *opp; @@ -100,6 +95,7 @@ static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index) static int cpu0_cpufreq_init(struct cpufreq_policy *policy) { + policy->clk = cpu_clk; return cpufreq_generic_init(policy, freq_table, transition_latency); } @@ -107,7 +103,7 @@ static struct cpufreq_driver cpu0_cpufreq_driver = { .flags = CPUFREQ_STICKY, .verify = cpufreq_generic_frequency_table_verify, .target_index = cpu0_set_target, - .get = cpu0_get_speed, + .get = cpufreq_generic_get, .init = cpu0_cpufreq_init, .exit = cpufreq_generic_exit, .name = "generic_cpu0", diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 3509ca0..b7e366d 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -176,6 +176,20 @@ int cpufreq_generic_init(struct cpufreq_policy *policy, } EXPORT_SYMBOL_GPL(cpufreq_generic_init); +unsigned int cpufreq_generic_get(unsigned int cpu) +{ + struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu); + + if (!policy || IS_ERR(policy->clk)) { + pr_err("%s: No %s associated to cpu: %d\n", __func__, + policy ? "clk" : "policy", cpu); + return 0; + } + + return clk_get_rate(policy->clk) / 1000; +} +EXPORT_SYMBOL_GPL(cpufreq_generic_get); + struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu) { struct cpufreq_policy *policy = NULL; @@ -1065,6 +1079,11 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif, goto err_set_policy_cpu; } + write_lock_irqsave(&cpufreq_driver_lock, flags); + for_each_cpu(j, policy->cpus) + per_cpu(cpufreq_cpu_data, j) = policy; + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + if (cpufreq_driver->get) { policy->cur = cpufreq_driver->get(policy->cpu); if (!policy->cur) { @@ -1139,11 +1158,6 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif, } #endif - write_lock_irqsave(&cpufreq_driver_lock, flags); - for_each_cpu(j, policy->cpus) - per_cpu(cpufreq_cpu_data, j) = policy; - write_unlock_irqrestore(&cpufreq_driver_lock, flags); - if (!frozen) { ret = cpufreq_add_dev_interface(policy, dev); if (ret) @@ -1169,12 +1183,12 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif, return 0; err_out_unregister: +err_get_freq: write_lock_irqsave(&cpufreq_driver_lock, flags); for_each_cpu(j, policy->cpus) per_cpu(cpufreq_cpu_data, j) = NULL; write_unlock_irqrestore(&cpufreq_driver_lock, flags); -err_get_freq: if (cpufreq_driver->exit) cpufreq_driver->exit(policy); err_set_policy_cpu: diff --git a/drivers/cpufreq/davinci-cpufreq.c b/drivers/cpufreq/davinci-cpufreq.c index 04f3390..2cf3384 100644 --- a/drivers/cpufreq/davinci-cpufreq.c +++ b/drivers/cpufreq/davinci-cpufreq.c @@ -58,14 +58,6 @@ static int davinci_verify_speed(struct cpufreq_policy *policy) return 0; } -static unsigned int davinci_getspeed(unsigned int cpu) -{ - if (cpu) - return 0; - - return clk_get_rate(cpufreq.armclk) / 1000; -} - static int davinci_target(struct cpufreq_policy *policy, unsigned int idx) { struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; @@ -73,7 +65,7 @@ static int davinci_target(struct cpufreq_policy *policy, unsigned int idx) unsigned int old_freq, new_freq; int ret = 0; - old_freq = davinci_getspeed(0); + old_freq = policy->cur; new_freq = pdata->freq_table[idx].frequency; /* if moving to higher frequency, up the voltage beforehand */ @@ -116,6 +108,8 @@ static int davinci_cpu_init(struct cpufreq_policy *policy) return result; } + policy->clk = cpufreq.armclk; + /* * Time measurement across the target() function yields ~1500-1800us * time taken with no drivers on notification list. @@ -129,7 +123,7 @@ static struct cpufreq_driver davinci_driver = { .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = davinci_verify_speed, .target_index = davinci_target, - .get = davinci_getspeed, + .get = cpufreq_generic_get, .init = davinci_cpu_init, .exit = cpufreq_generic_exit, .name = "davinci", diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c index 21d9898..412a78b 100644 --- a/drivers/cpufreq/dbx500-cpufreq.c +++ b/drivers/cpufreq/dbx500-cpufreq.c @@ -26,24 +26,9 @@ static int dbx500_cpufreq_target(struct cpufreq_policy *policy, return clk_set_rate(armss_clk, freq_table[index].frequency * 1000); } -static unsigned int dbx500_cpufreq_getspeed(unsigned int cpu) -{ - int i = 0; - unsigned long freq = clk_get_rate(armss_clk) / 1000; - - /* The value is rounded to closest frequency in the defined table. */ - while (freq_table[i + 1].frequency != CPUFREQ_TABLE_END) { - if (freq < freq_table[i].frequency + - (freq_table[i + 1].frequency - freq_table[i].frequency) / 2) - return freq_table[i].frequency; - i++; - } - - return freq_table[i].frequency; -} - static int dbx500_cpufreq_init(struct cpufreq_policy *policy) { + policy->clk = armss_clk; return cpufreq_generic_init(policy, freq_table, 20 * 1000); } @@ -52,7 +37,7 @@ static struct cpufreq_driver dbx500_cpufreq_driver = { CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, .target_index = dbx500_cpufreq_target, - .get = dbx500_cpufreq_getspeed, + .get = cpufreq_generic_get, .init = dbx500_cpufreq_init, .name = "DBX500", .attr = cpufreq_generic_attr, diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c index f7c322c..4ee3804 100644 --- a/drivers/cpufreq/exynos-cpufreq.c +++ b/drivers/cpufreq/exynos-cpufreq.c @@ -31,11 +31,6 @@ static unsigned int locking_frequency; static bool frequency_locked; static DEFINE_MUTEX(cpufreq_lock); -static unsigned int exynos_getspeed(unsigned int cpu) -{ - return clk_get_rate(exynos_info->cpu_clk) / 1000; -} - static int exynos_cpufreq_get_index(unsigned int freq) { struct cpufreq_frequency_table *freq_table = exynos_info->freq_table; @@ -215,6 +210,7 @@ static struct notifier_block exynos_cpufreq_nb = { static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy) { + policy->clk = exynos_info->cpu_clk; return cpufreq_generic_init(policy, exynos_info->freq_table, 100000); } @@ -222,7 +218,7 @@ static struct cpufreq_driver exynos_driver = { .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, .target_index = exynos_target, - .get = exynos_getspeed, + .get = cpufreq_generic_get, .init = exynos_cpufreq_cpu_init, .exit = cpufreq_generic_exit, .name = "exynos_cpufreq", @@ -264,7 +260,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev) goto err_vdd_arm; } - locking_frequency = exynos_getspeed(0); + locking_frequency = clk_get_rate(exynos_info->cpu_clk) / 1000; register_pm_notifier(&exynos_cpufreq_nb); diff --git a/drivers/cpufreq/exynos5440-cpufreq.c b/drivers/cpufreq/exynos5440-cpufreq.c index ffe6fae..49b75601 100644 --- a/drivers/cpufreq/exynos5440-cpufreq.c +++ b/drivers/cpufreq/exynos5440-cpufreq.c @@ -100,7 +100,6 @@ struct exynos_dvfs_data { struct resource *mem; int irq; struct clk *cpu_clk; - unsigned int cur_frequency; unsigned int latency; struct cpufreq_frequency_table *freq_table; unsigned int freq_count; @@ -165,7 +164,7 @@ static int init_div_table(void) return 0; } -static void exynos_enable_dvfs(void) +static void exynos_enable_dvfs(unsigned int cur_frequency) { unsigned int tmp, i, cpu; struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table; @@ -184,18 +183,18 @@ static void exynos_enable_dvfs(void) /* Set initial performance index */ for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) - if (freq_table[i].frequency == dvfs_info->cur_frequency) + if (freq_table[i].frequency == cur_frequency) break; if (freq_table[i].frequency == CPUFREQ_TABLE_END) { dev_crit(dvfs_info->dev, "Boot up frequency not supported\n"); /* Assign the highest frequency */ i = 0; - dvfs_info->cur_frequency = freq_table[i].frequency; + cur_frequency = freq_table[i].frequency; } dev_info(dvfs_info->dev, "Setting dvfs initial frequency = %uKHZ", - dvfs_info->cur_frequency); + cur_frequency); for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++) { tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4); @@ -209,11 +208,6 @@ static void exynos_enable_dvfs(void) dvfs_info->base + XMU_DVFS_CTRL); } -static unsigned int exynos_getspeed(unsigned int cpu) -{ - return dvfs_info->cur_frequency; -} - static int exynos_target(struct cpufreq_policy *policy, unsigned int index) { unsigned int tmp; @@ -222,7 +216,7 @@ static int exynos_target(struct cpufreq_policy *policy, unsigned int index) mutex_lock(&cpufreq_lock); - freqs.old = dvfs_info->cur_frequency; + freqs.old = policy->cur; freqs.new = freq_table[index].frequency; cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); @@ -250,7 +244,7 @@ static void exynos_cpufreq_work(struct work_struct *work) goto skip_work; mutex_lock(&cpufreq_lock); - freqs.old = dvfs_info->cur_frequency; + freqs.old = policy->cur; cur_pstate = __raw_readl(dvfs_info->base + XMU_P_STATUS); if (cur_pstate >> C0_3_PSTATE_VALID_SHIFT & 0x1) @@ -260,10 +254,9 @@ static void exynos_cpufreq_work(struct work_struct *work) if (likely(index < dvfs_info->freq_count)) { freqs.new = freq_table[index].frequency; - dvfs_info->cur_frequency = freqs.new; } else { dev_crit(dvfs_info->dev, "New frequency out of range\n"); - freqs.new = dvfs_info->cur_frequency; + freqs.new = freqs.old; } cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); @@ -307,6 +300,7 @@ static void exynos_sort_descend_freq_table(void) static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy) { + policy->clk = dvfs_info->cpu_clk; return cpufreq_generic_init(policy, dvfs_info->freq_table, dvfs_info->latency); } @@ -316,7 +310,7 @@ static struct cpufreq_driver exynos_driver = { CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, .target_index = exynos_target, - .get = exynos_getspeed, + .get = cpufreq_generic_get, .init = exynos_cpufreq_cpu_init, .exit = cpufreq_generic_exit, .name = CPUFREQ_NAME, @@ -336,6 +330,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev) int ret = -EINVAL; struct device_node *np; struct resource res; + unsigned int cur_frequency; np = pdev->dev.of_node; if (!np) @@ -392,13 +387,13 @@ static int exynos_cpufreq_probe(struct platform_device *pdev) goto err_free_table; } - dvfs_info->cur_frequency = clk_get_rate(dvfs_info->cpu_clk); - if (!dvfs_info->cur_frequency) { + cur_frequency = clk_get_rate(dvfs_info->cpu_clk); + if (!cur_frequency) { dev_err(dvfs_info->dev, "Failed to get clock rate\n"); ret = -EINVAL; goto err_free_table; } - dvfs_info->cur_frequency /= 1000; + cur_frequency /= 1000; INIT_WORK(&dvfs_info->irq_work, exynos_cpufreq_work); ret = devm_request_irq(dvfs_info->dev, dvfs_info->irq, @@ -415,7 +410,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev) goto err_free_table; } - exynos_enable_dvfs(); + exynos_enable_dvfs(cur_frequency); ret = cpufreq_register_driver(&exynos_driver); if (ret) { dev_err(dvfs_info->dev, diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index 2938257..ce69059 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -38,11 +38,6 @@ static unsigned int transition_latency; static u32 *imx6_soc_volt; static u32 soc_opp_count; -static unsigned int imx6q_get_speed(unsigned int cpu) -{ - return clk_get_rate(arm_clk) / 1000; -} - static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) { struct dev_pm_opp *opp; @@ -139,6 +134,7 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) static int imx6q_cpufreq_init(struct cpufreq_policy *policy) { + policy->clk = arm_clk; return cpufreq_generic_init(policy, freq_table, transition_latency); } @@ -146,7 +142,7 @@ static struct cpufreq_driver imx6q_cpufreq_driver = { .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, .target_index = imx6q_set_target, - .get = imx6q_get_speed, + .get = cpufreq_generic_get, .init = imx6q_cpufreq_init, .exit = cpufreq_generic_exit, .name = "imx6q-cpufreq", diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c index a436092..b6581ab 100644 --- a/drivers/cpufreq/loongson2_cpufreq.c +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -24,8 +24,6 @@ static uint nowait; -static struct clk *cpuclk; - static void (*saved_cpu_wait) (void); static int loongson2_cpu_freq_notifier(struct notifier_block *nb, @@ -44,11 +42,6 @@ static int loongson2_cpu_freq_notifier(struct notifier_block *nb, return 0; } -static unsigned int loongson2_cpufreq_get(unsigned int cpu) -{ - return clk_get_rate(cpuclk); -} - /* * Here we notify other drivers of the proposed change and the final change. */ @@ -69,13 +62,14 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy, set_cpus_allowed_ptr(current, &cpus_allowed); /* setting the cpu frequency */ - clk_set_rate(cpuclk, freq); + clk_set_rate(policy->clk, freq); return 0; } static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy) { + static struct clk *cpuclk; int i; unsigned long rate; int ret; @@ -104,13 +98,14 @@ static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy) return ret; } + policy->clk = cpuclk; return cpufreq_generic_init(policy, &loongson2_clockmod_table[0], 0); } static int loongson2_cpufreq_exit(struct cpufreq_policy *policy) { cpufreq_frequency_table_put_attr(policy->cpu); - clk_put(cpuclk); + clk_put(policy->clk); return 0; } @@ -119,7 +114,7 @@ static struct cpufreq_driver loongson2_cpufreq_driver = { .init = loongson2_cpufreq_cpu_init, .verify = cpufreq_generic_frequency_table_verify, .target_index = loongson2_cpufreq_target, - .get = loongson2_cpufreq_get, + .get = cpufreq_generic_get, .exit = loongson2_cpufreq_exit, .attr = cpufreq_generic_attr, }; diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 5de1e5f..590f5b6 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -36,21 +36,9 @@ static struct cpufreq_frequency_table *freq_table; static atomic_t freq_table_users = ATOMIC_INIT(0); -static struct clk *mpu_clk; static struct device *mpu_dev; static struct regulator *mpu_reg; -static unsigned int omap_getspeed(unsigned int cpu) -{ - unsigned long rate; - - if (cpu >= NR_CPUS) - return 0; - - rate = clk_get_rate(mpu_clk) / 1000; - return rate; -} - static int omap_target(struct cpufreq_policy *policy, unsigned int index) { int r, ret; @@ -58,11 +46,11 @@ static int omap_target(struct cpufreq_policy *policy, unsigned int index) unsigned long freq, volt = 0, volt_old = 0, tol = 0; unsigned int old_freq, new_freq; - old_freq = omap_getspeed(policy->cpu); + old_freq = policy->cur; new_freq = freq_table[index].frequency; freq = new_freq * 1000; - ret = clk_round_rate(mpu_clk, freq); + ret = clk_round_rate(policy->clk, freq); if (IS_ERR_VALUE(ret)) { dev_warn(mpu_dev, "CPUfreq: Cannot find matching frequency for %lu\n", @@ -100,7 +88,7 @@ static int omap_target(struct cpufreq_policy *policy, unsigned int index) } } - ret = clk_set_rate(mpu_clk, new_freq * 1000); + ret = clk_set_rate(policy->clk, new_freq * 1000); /* scaling down? scale voltage after frequency */ if (mpu_reg && (new_freq < old_freq)) { @@ -108,7 +96,7 @@ static int omap_target(struct cpufreq_policy *policy, unsigned int index) if (r < 0) { dev_warn(mpu_dev, "%s: unable to scale voltage down.\n", __func__); - clk_set_rate(mpu_clk, old_freq * 1000); + clk_set_rate(policy->clk, old_freq * 1000); return r; } } @@ -126,9 +114,9 @@ static int omap_cpu_init(struct cpufreq_policy *policy) { int result; - mpu_clk = clk_get(NULL, "cpufreq_ck"); - if (IS_ERR(mpu_clk)) - return PTR_ERR(mpu_clk); + policy->clk = clk_get(NULL, "cpufreq_ck"); + if (IS_ERR(policy->clk)) + return PTR_ERR(policy->clk); if (!freq_table) { result = dev_pm_opp_init_cpufreq_table(mpu_dev, &freq_table); @@ -149,7 +137,7 @@ static int omap_cpu_init(struct cpufreq_policy *policy) freq_table_free(); fail: - clk_put(mpu_clk); + clk_put(policy->clk); return result; } @@ -157,7 +145,7 @@ static int omap_cpu_exit(struct cpufreq_policy *policy) { cpufreq_frequency_table_put_attr(policy->cpu); freq_table_free(); - clk_put(mpu_clk); + clk_put(policy->clk); return 0; } @@ -165,7 +153,7 @@ static struct cpufreq_driver omap_driver = { .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, .target_index = omap_target, - .get = omap_getspeed, + .get = cpufreq_generic_get, .init = omap_cpu_init, .exit = omap_cpu_exit, .name = "omap", diff --git a/drivers/cpufreq/ppc-corenet-cpufreq.c b/drivers/cpufreq/ppc-corenet-cpufreq.c index 3f7be46..051000f 100644 --- a/drivers/cpufreq/ppc-corenet-cpufreq.c +++ b/drivers/cpufreq/ppc-corenet-cpufreq.c @@ -24,12 +24,10 @@ /** * struct cpu_data - per CPU data struct - * @clk: the clk of CPU * @parent: the parent node of cpu clock * @table: frequency table */ struct cpu_data { - struct clk *clk; struct device_node *parent; struct cpufreq_frequency_table *table; }; @@ -81,13 +79,6 @@ static inline const struct cpumask *cpu_core_mask(int cpu) } #endif -static unsigned int corenet_cpufreq_get_speed(unsigned int cpu) -{ - struct cpu_data *data = per_cpu(cpu_data, cpu); - - return clk_get_rate(data->clk) / 1000; -} - /* reduce the duplicated frequencies in frequency table */ static void freq_table_redup(struct cpufreq_frequency_table *freq_table, int count) @@ -158,8 +149,8 @@ static int corenet_cpufreq_cpu_init(struct cpufreq_policy *policy) goto err_np; } - data->clk = of_clk_get(np, 0); - if (IS_ERR(data->clk)) { + policy->clk = of_clk_get(np, 0); + if (IS_ERR(policy->clk)) { pr_err("%s: no clock information\n", __func__); goto err_nomem2; } @@ -255,7 +246,7 @@ static int corenet_cpufreq_target(struct cpufreq_policy *policy, struct cpu_data *data = per_cpu(cpu_data, policy->cpu); parent = of_clk_get(data->parent, data->table[index].driver_data); - return clk_set_parent(data->clk, parent); + return clk_set_parent(policy->clk, parent); } static struct cpufreq_driver ppc_corenet_cpufreq_driver = { @@ -265,7 +256,7 @@ static struct cpufreq_driver ppc_corenet_cpufreq_driver = { .exit = __exit_p(corenet_cpufreq_cpu_exit), .verify = cpufreq_generic_frequency_table_verify, .target_index = corenet_cpufreq_target, - .get = corenet_cpufreq_get_speed, + .get = cpufreq_generic_get, .attr = cpufreq_generic_attr, }; diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c index 6a1bf96..2506974 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -355,11 +355,6 @@ static int s3c_cpufreq_target(struct cpufreq_policy *policy, return -EINVAL; } -static unsigned int s3c_cpufreq_get(unsigned int cpu) -{ - return clk_get_rate(clk_arm) / 1000; -} - struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name) { struct clk *clk; @@ -373,6 +368,7 @@ struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name) static int s3c_cpufreq_init(struct cpufreq_policy *policy) { + policy->clk = clk_arm; return cpufreq_generic_init(policy, ftab, cpu_cur.info->latency); } @@ -408,7 +404,7 @@ static int s3c_cpufreq_suspend(struct cpufreq_policy *policy) { suspend_pll.frequency = clk_get_rate(_clk_mpll); suspend_pll.driver_data = __raw_readl(S3C2410_MPLLCON); - suspend_freq = s3c_cpufreq_get(0) * 1000; + suspend_freq = clk_get_rate(clk_arm); return 0; } @@ -450,7 +446,7 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy) static struct cpufreq_driver s3c24xx_driver = { .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, .target = s3c_cpufreq_target, - .get = s3c_cpufreq_get, + .get = cpufreq_generic_get, .init = s3c_cpufreq_init, .suspend = s3c_cpufreq_suspend, .resume = s3c_cpufreq_resume, diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c index 8435f45..c4226de 100644 --- a/drivers/cpufreq/s3c64xx-cpufreq.c +++ b/drivers/cpufreq/s3c64xx-cpufreq.c @@ -19,7 +19,6 @@ #include <linux/regulator/consumer.h> #include <linux/module.h> -static struct clk *armclk; static struct regulator *vddarm; static unsigned long regulator_latency; @@ -54,14 +53,6 @@ static struct cpufreq_frequency_table s3c64xx_freq_table[] = { }; #endif -static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu) -{ - if (cpu != 0) - return 0; - - return clk_get_rate(armclk) / 1000; -} - static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, unsigned int index) { @@ -69,7 +60,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, unsigned int old_freq, new_freq; int ret; - old_freq = clk_get_rate(armclk) / 1000; + old_freq = clk_get_rate(policy->clk) / 1000; new_freq = s3c64xx_freq_table[index].frequency; dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[index].driver_data]; @@ -86,7 +77,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, } #endif - ret = clk_set_rate(armclk, new_freq * 1000); + ret = clk_set_rate(policy->clk, new_freq * 1000); if (ret < 0) { pr_err("Failed to set rate %dkHz: %d\n", new_freq, ret); @@ -101,7 +92,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, if (ret != 0) { pr_err("Failed to set VDDARM for %dkHz: %d\n", new_freq, ret); - if (clk_set_rate(armclk, old_freq * 1000) < 0) + if (clk_set_rate(policy->clk, old_freq * 1000) < 0) pr_err("Failed to restore original clock rate\n"); return ret; @@ -110,7 +101,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, #endif pr_debug("Set actual frequency %lukHz\n", - clk_get_rate(armclk) / 1000); + clk_get_rate(policy->clk) / 1000); return 0; } @@ -169,11 +160,11 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) return -ENODEV; } - armclk = clk_get(NULL, "armclk"); - if (IS_ERR(armclk)) { + policy->clk = clk_get(NULL, "armclk"); + if (IS_ERR(policy->clk)) { pr_err("Unable to obtain ARMCLK: %ld\n", - PTR_ERR(armclk)); - return PTR_ERR(armclk); + PTR_ERR(policy->clk)); + return PTR_ERR(policy->clk); } #ifdef CONFIG_REGULATOR @@ -193,7 +184,7 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) unsigned long r; /* Check for frequencies we can generate */ - r = clk_round_rate(armclk, freq->frequency * 1000); + r = clk_round_rate(policy->clk, freq->frequency * 1000); r /= 1000; if (r != freq->frequency) { pr_debug("%dkHz unsupported by clock\n", @@ -203,7 +194,7 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) /* If we have no regulator then assume startup * frequency is the maximum we can support. */ - if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0)) + if (!vddarm && freq->frequency > clk_get_rate(policy->clk) / 1000) freq->frequency = CPUFREQ_ENTRY_INVALID; freq++; @@ -219,7 +210,7 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) pr_err("Failed to configure frequency table: %d\n", ret); regulator_put(vddarm); - clk_put(armclk); + clk_put(policy->clk); } return ret; @@ -229,7 +220,7 @@ static struct cpufreq_driver s3c64xx_cpufreq_driver = { .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, .target_index = s3c64xx_cpufreq_set_target, - .get = s3c64xx_cpufreq_get_speed, + .get = cpufreq_generic_get, .init = s3c64xx_cpufreq_driver_init, .name = "s3c", }; diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c index ccd548c..55a8e9f 100644 --- a/drivers/cpufreq/s5pv210-cpufreq.c +++ b/drivers/cpufreq/s5pv210-cpufreq.c @@ -23,7 +23,6 @@ #include <mach/map.h> #include <mach/regs-clock.h> -static struct clk *cpu_clk; static struct clk *dmc0_clk; static struct clk *dmc1_clk; static DEFINE_MUTEX(set_freq_lock); @@ -164,14 +163,6 @@ static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq) __raw_writel(tmp1, reg); } -static unsigned int s5pv210_getspeed(unsigned int cpu) -{ - if (cpu) - return 0; - - return clk_get_rate(cpu_clk) / 1000; -} - static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) { unsigned long reg; @@ -193,7 +184,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) goto exit; } - old_freq = s5pv210_getspeed(0); + old_freq = policy->cur; new_freq = s5pv210_freq_table[index].frequency; /* Finding current running level index */ @@ -471,9 +462,9 @@ static int __init s5pv210_cpu_init(struct cpufreq_policy *policy) unsigned long mem_type; int ret; - cpu_clk = clk_get(NULL, "armclk"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); + policy->clk = clk_get(NULL, "armclk"); + if (IS_ERR(policy->clk)) + return PTR_ERR(policy->clk); dmc0_clk = clk_get(NULL, "sclk_dmc0"); if (IS_ERR(dmc0_clk)) { @@ -516,7 +507,7 @@ static int __init s5pv210_cpu_init(struct cpufreq_policy *policy) out_dmc1: clk_put(dmc0_clk); out_dmc0: - clk_put(cpu_clk); + clk_put(policy->clk); return ret; } @@ -563,7 +554,7 @@ static struct cpufreq_driver s5pv210_driver = { .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, .target_index = s5pv210_target, - .get = s5pv210_getspeed, + .get = cpufreq_generic_get, .init = s5pv210_cpu_init, .name = "s5pv210", #ifdef CONFIG_PM diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c index c7525fe..5c86e3f 100644 --- a/drivers/cpufreq/spear-cpufreq.c +++ b/drivers/cpufreq/spear-cpufreq.c @@ -30,11 +30,6 @@ static struct { u32 cnt; } spear_cpufreq; -static unsigned int spear_cpufreq_get(unsigned int cpu) -{ - return clk_get_rate(spear_cpufreq.clk) / 1000; -} - static struct clk *spear1340_cpu_get_possible_parent(unsigned long newfreq) { struct clk *sys_pclk; @@ -156,6 +151,7 @@ static int spear_cpufreq_target(struct cpufreq_policy *policy, static int spear_cpufreq_init(struct cpufreq_policy *policy) { + policy->clk = spear_cpufreq.clk; return cpufreq_generic_init(policy, spear_cpufreq.freq_tbl, spear_cpufreq.transition_latency); } @@ -165,7 +161,7 @@ static struct cpufreq_driver spear_cpufreq_driver = { .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, .target_index = spear_cpufreq_target, - .get = spear_cpufreq_get, + .get = cpufreq_generic_get, .init = spear_cpufreq_init, .exit = cpufreq_generic_exit, .attr = cpufreq_generic_attr, diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c index 01b5578..e652c1b 100644 --- a/drivers/cpufreq/tegra-cpufreq.c +++ b/drivers/cpufreq/tegra-cpufreq.c @@ -47,21 +47,9 @@ static struct clk *pll_x_clk; static struct clk *pll_p_clk; static struct clk *emc_clk; -static unsigned long target_cpu_speed[NUM_CPUS]; static DEFINE_MUTEX(tegra_cpu_lock); static bool is_suspended; -static unsigned int tegra_getspeed(unsigned int cpu) -{ - unsigned long rate; - - if (cpu >= NUM_CPUS) - return 0; - - rate = clk_get_rate(cpu_clk) / 1000; - return rate; -} - static int tegra_cpu_clk_set_rate(unsigned long rate) { int ret; @@ -103,9 +91,6 @@ static int tegra_update_cpu_speed(struct cpufreq_policy *policy, { int ret = 0; - if (tegra_getspeed(0) == rate) - return ret; - /* * Vote on memory bus frequency based on cpu frequency * This sets the minimum frequency, display or avp may request higher @@ -125,33 +110,16 @@ static int tegra_update_cpu_speed(struct cpufreq_policy *policy, return ret; } -static unsigned long tegra_cpu_highest_speed(void) -{ - unsigned long rate = 0; - int i; - - for_each_online_cpu(i) - rate = max(rate, target_cpu_speed[i]); - return rate; -} - static int tegra_target(struct cpufreq_policy *policy, unsigned int index) { - unsigned int freq; - int ret = 0; + int ret = -EBUSY; mutex_lock(&tegra_cpu_lock); - if (is_suspended) - goto out; - - freq = freq_table[index].frequency; + if (!is_suspended) + ret = tegra_update_cpu_speed(policy, + freq_table[index].frequency); - target_cpu_speed[policy->cpu] = freq; - - ret = tegra_update_cpu_speed(policy, tegra_cpu_highest_speed()); - -out: mutex_unlock(&tegra_cpu_lock); return ret; } @@ -165,7 +133,8 @@ static int tegra_pm_notify(struct notifier_block *nb, unsigned long event, is_suspended = true; pr_info("Tegra cpufreq suspend: setting frequency to %d kHz\n", freq_table[0].frequency); - tegra_update_cpu_speed(policy, freq_table[0].frequency); + if (clk_get_rate(cpu_clk) / 1000 != freq_table[0].frequency) + tegra_update_cpu_speed(policy, freq_table[0].frequency); cpufreq_cpu_put(policy); } else if (event == PM_POST_SUSPEND) { is_suspended = false; @@ -189,8 +158,6 @@ static int tegra_cpu_init(struct cpufreq_policy *policy) clk_prepare_enable(emc_clk); clk_prepare_enable(cpu_clk); - target_cpu_speed[policy->cpu] = tegra_getspeed(policy->cpu); - /* FIXME: what's the actual transition time? */ ret = cpufreq_generic_init(policy, freq_table, 300 * 1000); if (ret) { @@ -202,6 +169,7 @@ static int tegra_cpu_init(struct cpufreq_policy *policy) if (policy->cpu == 0) register_pm_notifier(&tegra_cpu_pm_notifier); + policy->clk = cpu_clk; return 0; } @@ -217,7 +185,7 @@ static struct cpufreq_driver tegra_cpufreq_driver = { .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, .target_index = tegra_target, - .get = tegra_getspeed, + .get = cpufreq_generic_get, .init = tegra_cpu_init, .exit = tegra_cpu_exit, .name = "tegra", diff --git a/drivers/cpufreq/unicore2-cpufreq.c b/drivers/cpufreq/unicore2-cpufreq.c index 86f6cfe..36cc330 100644 --- a/drivers/cpufreq/unicore2-cpufreq.c +++ b/drivers/cpufreq/unicore2-cpufreq.c @@ -11,6 +11,7 @@ * published by the Free Software Foundation. */ +#include <linux/err.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/init.h> @@ -33,28 +34,18 @@ static int ucv2_verify_speed(struct cpufreq_policy *policy) return 0; } -static unsigned int ucv2_getspeed(unsigned int cpu) -{ - struct clk *mclk = clk_get(NULL, "MAIN_CLK"); - - if (cpu) - return 0; - return clk_get_rate(mclk)/1000; -} - static int ucv2_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { struct cpufreq_freqs freqs; - struct clk *mclk = clk_get(NULL, "MAIN_CLK"); int ret; freqs.old = policy->cur; freqs.new = target_freq; cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - ret = clk_set_rate(mclk, target_freq * 1000); + ret = clk_set_rate(policy->mclk, target_freq * 1000); cpufreq_notify_post_transition(policy, &freqs, ret); return ret; @@ -64,9 +55,13 @@ static int __init ucv2_cpu_init(struct cpufreq_policy *policy) { if (policy->cpu != 0) return -EINVAL; + policy->min = policy->cpuinfo.min_freq = 250000; policy->max = policy->cpuinfo.max_freq = 1000000; policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->clk = clk_get(NULL, "MAIN_CLK"); + if (IS_ERR(policy->clk)) + return PTR_ERR(policy->clk); return 0; } @@ -74,7 +69,7 @@ static struct cpufreq_driver ucv2_driver = { .flags = CPUFREQ_STICKY, .verify = ucv2_verify_speed, .target = ucv2_target, - .get = ucv2_getspeed, + .get = cpufreq_generic_get, .init = ucv2_cpu_init, .name = "UniCore-II", }; diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index aaf800e..af72aba 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -11,6 +11,7 @@ #ifndef _LINUX_CPUFREQ_H #define _LINUX_CPUFREQ_H +#include <linux/clk.h> #include <linux/cpumask.h> #include <linux/completion.h> #include <linux/kobject.h> @@ -66,6 +67,7 @@ struct cpufreq_policy { unsigned int cpu; /* cpu nr of CPU managing this policy */ unsigned int last_cpu; /* cpu nr of previous CPU that managed * this policy */ + struct clk *clk; struct cpufreq_cpuinfo cpuinfo;/* see above */ unsigned int min; /* in kHz */ @@ -468,6 +470,7 @@ void cpufreq_frequency_table_put_attr(unsigned int cpu); int cpufreq_table_validate_and_show(struct cpufreq_policy *policy, struct cpufreq_frequency_table *table); +unsigned int cpufreq_generic_get(unsigned int cpu); int cpufreq_generic_init(struct cpufreq_policy *policy, struct cpufreq_frequency_table *table, unsigned int transition_latency); -- 1.7.12.rc2.18.g61b472e

12 years

[PATCH 1/5] ASoC: ad1836: Use params_width() rather than explicit memory format

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/codecs/ad1836.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/ad1836.c b/sound/soc/codecs/ad1836.c index d7c983862cf0..77f459868579 100644 --- a/sound/soc/codecs/ad1836.c +++ b/sound/soc/codecs/ad1836.c @@ -168,15 +168,15 @@ static int ad1836_hw_params(struct snd_pcm_substream *substream, int word_len = 0; /* bit size */ - switch (params_format(params)) { - case SNDRV_PCM_FORMAT_S16_LE: + switch (params_width(params)) { + case 16: word_len = AD1836_WORD_LEN_16; break; - case SNDRV_PCM_FORMAT_S20_3LE: + case 20: word_len = AD1836_WORD_LEN_20; break; - case SNDRV_PCM_FORMAT_S24_LE: - case SNDRV_PCM_FORMAT_S32_LE: + case 24: + case 32: word_len = AD1836_WORD_LEN_24; break; default: -- 1.8.5.2

12 years

[PATCH 1/4] arm64: topology: Implement basic CPU topology support

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> Add basic CPU topology support to arm64, based on the existing pre-v8 code and some work done by Mark Hambleton. This patch does not implement any topology discovery support since that should be based on information from firmware, it merely implements the scaffolding for integration of topology support in the architecture. The goal is to separate the architecture hookup for providing topology information from the DT parsing in order to ease review and avoid blocking the architecture code (which will be built on by other work) with the DT code review by providing something something simple and basic. A following patch will implement support for parsing the DT topology bindings for ARM, similar patches will be needed for ACPI. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- arch/arm64/Kconfig | 24 ++++++++++ arch/arm64/include/asm/topology.h | 39 +++++++++++++++++ arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/smp.c | 12 +++++ arch/arm64/kernel/topology.c | 92 +++++++++++++++++++++++++++++++++++++++ 5 files changed, 168 insertions(+) create mode 100644 arch/arm64/include/asm/topology.h create mode 100644 arch/arm64/kernel/topology.c diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 249acb9da4e3..a53514cdf39c 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -162,6 +162,30 @@ config SMP If you don't know what to do here, say N. +config ARM_CPU_TOPOLOGY + bool "Support CPU topology definition" + depends on SMP + default y + help + Support CPU topology definition, based on configuration + provided by the firmware. + +config SCHED_MC + bool "Multi-core scheduler support" + depends on ARM_CPU_TOPOLOGY + help + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + +config SCHED_SMT + bool "SMT scheduler support" + depends on ARM_CPU_TOPOLOGY + help + Improves the CPU scheduler's decision making when dealing with + MultiThreading at a cost of slightly increased overhead in some + places. If unsure say N here. + config NR_CPUS int "Maximum number of CPUs (2-32)" range 2 32 diff --git a/arch/arm64/include/asm/topology.h b/arch/arm64/include/asm/topology.h new file mode 100644 index 000000000000..58b8b84adcd2 --- /dev/null +++ b/arch/arm64/include/asm/topology.h @@ -0,0 +1,39 @@ +#ifndef _ASM_ARM_TOPOLOGY_H +#define _ASM_ARM_TOPOLOGY_H + +#ifdef CONFIG_ARM_CPU_TOPOLOGY + +#include <linux/cpumask.h> + +struct cputopo_arm { + int thread_id; + int core_id; + int socket_id; + cpumask_t thread_sibling; + cpumask_t core_sibling; +}; + +extern struct cputopo_arm cpu_topology[NR_CPUS]; + +#define topology_physical_package_id(cpu) (cpu_topology[cpu].socket_id) +#define topology_core_id(cpu) (cpu_topology[cpu].core_id) +#define topology_core_cpumask(cpu) (&cpu_topology[cpu].core_sibling) +#define topology_thread_cpumask(cpu) (&cpu_topology[cpu].thread_sibling) + +#define mc_capable() (cpu_topology[0].socket_id != -1) +#define smt_capable() (cpu_topology[0].thread_id != -1) + +void init_cpu_topology(void); +void store_cpu_topology(unsigned int cpuid); +const struct cpumask *cpu_coregroup_mask(int cpu); + +#else + +static inline void init_cpu_topology(void) { } +static inline void store_cpu_topology(unsigned int cpuid) { } + +#endif + +#include <asm-generic/topology.h> + +#endif /* _ASM_ARM_TOPOLOGY_H */ diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 1cd339d5037b..b2fe6ba97080 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -19,6 +19,7 @@ arm64-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)+= hw_breakpoint.o arm64-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o arm64-obj-$(CONFIG_ARM64_CPU_SUSPEND) += sleep.o suspend.o +arm64-obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o obj-y += $(arm64-obj-y) vdso/ obj-m += $(arm64-obj-m) diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index 1b7617ab499b..40e20efc13e6 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -114,6 +114,11 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle) return ret; } +static void __cpuinit smp_store_cpu_info(unsigned int cpuid) +{ + store_cpu_topology(cpuid); +} + /* * This is the secondary CPU boot entry. We're using this CPUs * idle thread stack, but a set of temporary page tables. @@ -152,6 +157,8 @@ asmlinkage void secondary_start_kernel(void) */ notify_cpu_starting(cpu); + smp_store_cpu_info(cpu); + /* * OK, now it's safe to let the boot CPU continue. Wait for * the CPU migration code to notice that the CPU is online @@ -391,6 +398,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus) int err; unsigned int cpu, ncores = num_possible_cpus(); + init_cpu_topology(); + + smp_store_cpu_info(smp_processor_id()); + + /* * are we trying to boot more cores than exist? */ diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c new file mode 100644 index 000000000000..853544f30a8b --- /dev/null +++ b/arch/arm64/kernel/topology.c @@ -0,0 +1,92 @@ +/* + * arch/arm64/kernel/topology.c + * + * Copyright (C) 2011,2013 Linaro Limited. + * + * Based on the arm32 version written by Vincent Guittot in turn based on + * arch/sh/kernel/topology.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/cpu.h> +#include <linux/cpumask.h> +#include <linux/init.h> +#include <linux/percpu.h> +#include <linux/node.h> +#include <linux/nodemask.h> +#include <linux/sched.h> +#include <linux/slab.h> + +#include <asm/topology.h> + +/* + * cpu topology table + */ +struct cputopo_arm cpu_topology[NR_CPUS]; +EXPORT_SYMBOL_GPL(cpu_topology); + +const struct cpumask *cpu_coregroup_mask(int cpu) +{ + return &cpu_topology[cpu].core_sibling; +} + +static void update_siblings_masks(unsigned int cpuid) +{ + struct cputopo_arm *cpu_topo, *cpuid_topo = &cpu_topology[cpuid]; + int cpu; + + /* update core and thread sibling masks */ + for_each_possible_cpu(cpu) { + cpu_topo = &cpu_topology[cpu]; + + if (cpuid_topo->socket_id != cpu_topo->socket_id) + continue; + + cpumask_set_cpu(cpuid, &cpu_topo->core_sibling); + if (cpu != cpuid) + cpumask_set_cpu(cpu, &cpuid_topo->core_sibling); + + if (cpuid_topo->core_id != cpu_topo->core_id) + continue; + + cpumask_set_cpu(cpuid, &cpu_topo->thread_sibling); + if (cpu != cpuid) + cpumask_set_cpu(cpu, &cpuid_topo->thread_sibling); + } + smp_wmb(); +} + +void store_cpu_topology(unsigned int cpuid) +{ + struct cputopo_arm *cpuid_topo = &cpu_topology[cpuid]; + + /* DT should have been parsed by the time we get here */ + if (cpuid_topo->core_id == -1) + pr_info("CPU%u: No topology information configured\n", cpuid); + else + update_siblings_masks(cpuid); +} + +/* + * init_cpu_topology is called at boot when only one cpu is running + * which prevent simultaneous write access to cpu_topology array + */ +void __init init_cpu_topology(void) +{ + unsigned int cpu; + + /* init core mask and power*/ + for_each_possible_cpu(cpu) { + struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]); + + cpu_topo->thread_id = -1; + cpu_topo->core_id = -1; + cpu_topo->socket_id = -1; + cpumask_clear(&cpu_topo->core_sibling); + cpumask_clear(&cpu_topo->thread_sibling); + } + smp_wmb(); +} -- 1.8.5.2

12 years

kexec/kdump for arm64

by Geoff Levand

Hi All, Just for anyone who might be interested, I've started to do some work on kexec and kdump support for arm64. This work is being done within Linaro, so is tracked by their Jira system: https://cards.linaro.org/browse/CARD-563 I have these two git repos with my work-in-progress patches: https://git.linaro.org/gitweb?p=people/geoff/kexec-tools.git https://git.linaro.org/gitweb?p=people/geoff/linux-kexec.git As of now, I'm just trying to get the pieces in place for a basic kexec reboot. Kdump and advanced features will come later. Comments or suggestions welcome. -Geoff

12 years

mainline boot: 32 pass, 0 fail (v3.13-rc7-72-g7d1c153)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.13-rc7-72-g7d1c153 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 28.0 sec omap3-beagle-xm PASS: 0 min 54.0 sec am335x-bone PASS: 0 min 26.7 sec omap4-panda PASS: 1 min 6.2 sec omap4-panda-es PASS: 1 min 5.3 sec omap3-tobi,3730storm PASS: 0 min 24.2 sec omap3-tobi,3530overo PASS: 0 min 21.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec imx6q-wandboard PASS: 0 min 16.4 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.1 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.1 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.6 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 32.4 sec tegra30-beaver PASS: 0 min 14.3 sec am335x-boneblack PASS: 0 min 24.7 sec omap3-beagle-xm PASS: 0 min 57.8 sec sun7i-a20-cubieboard2 PASS: 0 min 13.0 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 3.7 sec omap4-panda-es PASS: 1 min 3.1 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.6 sec am335x-bone PASS: 0 min 23.5 sec imx6q-wandboard PASS: 0 min 16.8 sec omap3-tobi,3730storm PASS: 0 min 19.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.8 sec omap3-tobi,3530overo PASS: 0 min 20.0 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 28.0 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec

12 years

[PATCH CFT] ARM:EP93XX: Enable ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR by default

by panchaxari

This patch enables ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR as default configs to EP93XX platforms from Cirrus. Introduction of PHYS_VIRT config as default config enables phy-to-virt and virt-to-phy translation functions at boot and module loading time, and enforce dynamic reallocation of memory. PHYS_VIRT config is mutually exclusive to XIP_KERNEL, XIP_KERNEL is used in systems with NOR flash devices. AUTO_ZRELADDR config enables auto calculation of the decompressed kernel image address. AUTO_ZRELADDR config is mutually exclusive to ZBOOT_ROM, and also assumes zImage to be loaded in the first 128MiB from start of memory. CFT::Call For Testing Requesting maintainers of EP93XX platform to evaluate the changes on the board and comment, as I dont have the board for testing and also requesting an ACK. Signed-off-by: panchaxari <panchaxari.prasannamurthy(a)linaro.org> Cc: Hartley Sweeten <hsweeten(a)visionengravers.com> Cc: Ryan Mallon <rmallon(a)gmail.com> Cc: Linus Walleij <linus.walleij(a)linaro.org> Cc: Russell King <linux(a)arm.linux.org.uk> Cc: linux-arm-kernel(a)lists.infradead.org Cc: linux-kernel(a)vger.kernel.org --- Below lkml link is a quoting by Russell which explains more on concept of PHYS_VIRT and ZRELADDR ------------------------------------------------- https://lkml.org/lkml/2011/10/14/434 ------------------------------------------------- --- arch/arm/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3501362..077ef9d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -420,10 +420,12 @@ config ARCH_EBSA110 config ARCH_EP93XX bool "EP93xx-based" select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_PATCH_PHYS_VIRT select ARCH_REQUIRE_GPIOLIB select ARCH_USES_GETTIMEOFFSET select ARM_AMBA select ARM_VIC + select AUTO_ZRELADDR select CLKDEV_LOOKUP select CPU_ARM920T select NEED_MACH_MEMORY_H -- 1.7.10.4

12 years

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-kernel