Hi Andy,
On Saturday 23 June 2012 07:31 AM, Andy Green wrote:
We only test the kernel configured with omap4plus defconfig (ie, make ARCH=arm omap4plus_defconfig to create .config), which works on omap4430, 4460 Panda and omap5432 dev boards.
We don't have access to any Blaze devices, so we neither target compatibility with that nor could test against it.
Having said that, you sure do pretty well from your log... edid is coming, both Alsa cards are probed.
We did work on HDMI hpd since your mail, removing the enable / disable imbalance that provokes the gpio error. It might be worth trying again with tilt-3.4 branch we created since then. The divide by zero just seems to be coming in the HDMI error path.
I tried it again with the tilt-3.4 branch. Now, the kernel won't boot at all. It stops at "Starting kernel" and just stays there. I tried it on both 4430 and 4460 daughter cards on the Blaze. I also tried it on a Pandaboard with 4430 and it is stuck at the "Starting kernel ..." print on the serial port.
Thanks Ramakrishnan