Automated DT boot report for various ARM defconfigs.
Tree/Branch: queue Git describe: v3.12.16 Failed boot tests (console logs at the end) =========================================== omap5-uevm: FAIL: omap2plus_defconfig omap5-uevm: FAIL: multi_lpae_defconfig omap5-uevm: FAIL: multi_v7_defconfig da850-evm: FAIL: davinci_all_defconfig armada-370-mirabox: FAIL: mvebu_defconfig
Full Report ===========
da8xx_omapl_defconfig --------------------- da850-evm 0 min 15.0 sec: PASS legacy,da850evm 0 min 14.1 sec: PASS
omap2plus_defconfig ------------------- legacy,3730xm 0 min 52.5 sec: PASS am335x-boneblack 0 min 25.5 sec: PASS omap3-beagle-xm 0 min 55.8 sec: PASS legacy,3530beagle 0 min 39.6 sec: PASS omap4-panda 1 min 1.2 sec: PASS omap3-tobi 0 min 21.8 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap5-uevm 1 min 26.1 sec: FAIL omap4-panda-es 1 min 5.5 sec: PASS legacy,3730storm 0 min 21.2 sec: PASS legacy,3530overo 0 min 21.8 sec: PASS
multi_lpae_defconfig -------------------- omap5-uevm 1 min 12.1 sec: FAIL sun7i-a20-cubieboard2 0 min 13.5 sec: PASS
tegra_defconfig --------------- tegra30-beaver 0 min 16.9 sec: PASS
imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 17.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.2 sec: PASS imx6q-wandboard 0 min 16.4 sec: PASS
bcm_defconfig ------------- bcm28155-ap 0 min 23.1 sec: PASS
exynos_defconfig ---------------- exynos5250-arndale 0 min 29.9 sec: PASS
multi_v7_defconfig ------------------ ste-snowball 0 min 28.1 sec: PASS tegra30-beaver 0 min 14.2 sec: PASS am335x-boneblack 0 min 32.2 sec: PASS omap3-beagle-xm 0 min 54.6 sec: PASS sun7i-a20-cubieboard2 0 min 13.8 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS omap4-panda 1 min 5.7 sec: PASS armada-xp-openblocks-ax3-4 0 min 22.6 sec: PASS sun4i-a10-cubieboard 0 min 18.3 sec: PASS bcm28155-ap 0 min 25.9 sec: PASS imx6dl-wandboard,wand-solo 0 min 17.3 sec: PASS omap3-tobi 0 min 20.5 sec: PASS am335x-bone 0 min 38.9 sec: PASS omap5-uevm 1 min 15.6 sec: FAIL imx6q-wandboard 0 min 16.6 sec: PASS omap4-panda-es 1 min 12.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 17.3 sec: PASS
u8500_defconfig --------------- ste-snowball 0 min 33.8 sec: PASS
sama5_defconfig --------------- sama5d35ek 0 min 17.3 sec: PASS
davinci_all_defconfig --------------------- legacy,dm365evm 0 min 16.6 sec: PASS da850-evm 0 min 40.8 sec: FAIL
mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 0 min 21.9 sec: PASS armada-370-mirabox 0 min 48.2 sec: FAIL
Console logs for failures =========================
omap2plus_defconfig -------------------
omap5-uevm: FAIL: last 80 lines of boot log: --------------------------------------------
USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/057 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.200 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-ImtVAs/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-ImtVAs/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-ImtVAs/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ######################## 412.1 KiB/s done Bytes transferred = 4168944 (3f9cf0 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 63.5 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-ImtVAs/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-ImtVAs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-ImtVAs/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *EHCI timed out on TD - token=0x88008d80 T ## 2.9 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x3f9cf0 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f8757c
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 86.13 seconds. # PYBOOT: Result: FAIL
multi_lpae_defconfig --------------------
omap5-uevm: FAIL: last 80 lines of boot log: --------------------------------------------
if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/057 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.200 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-NNJpx4/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-NNJpx4/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-NNJpx4/zImage'. Load address: 0x82000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################## 518.6 KiB/s done Bytes transferred = 3583792 (36af30 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 103.5 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot#tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-NNJpx4/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-NNJpx4/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-NNJpx4/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *T ## 2.9 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x36af30 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f8757c
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 72.08 seconds. # PYBOOT: Result: FAIL
multi_v7_defconfig ------------------
omap5-uevm: FAIL: last 80 lines of boot log: --------------------------------------------
U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/043 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.200 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-sRQigb/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-sRQigb/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-sRQigb/zImage'. Load address: 0x82000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################# 458 KiB/s done Bytes transferred = 3567320 (366ed8 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 87.9 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-sRQigb/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-sRQigb/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-sRQigb/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *T ## 2 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x366ed8 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f8757c
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 75.56 seconds. # PYBOOT: Result: FAIL
davinci_all_defconfig ---------------------
da850-evm: FAIL: last 80 lines of boot log: -------------------------------------------
Starting SPI Memory Copy... Valid magicnum, 0x55424CBB, found at offset 0x00010000. DONE Jumping to entry point at 0xC1080000. MMC: davinci: 0 SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB Net: DaVinci-EMAC Hit any key to stop autoboot: 3 0 U-Boot > U-Boot > version version
U-Boot 2014.01-dirty (Feb 27 2014 - 15:12:48) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.52.20130913 U-Boot > setenv bootargs console=ttyS2,115200n8 debug earlyprintk setenv bootargs console=ttyS2,115200n8 debug earlyprintk U-Boot > if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot > if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot > setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot > dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.1.194 U-Boot >setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot > if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot > tftp 0xc0800000 192.168.1.2:tmp/da850evm-LEUr8O/zImage-dtb-N0adJJ tftp 0xc0800000 192.168.1.2:tmp/da850evm-LEUr8O/zImage-dtb-N0adJJ Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'tmp/da850evm-LEUr8O/zImage-dtb-N0adJJ'. Load address: 0xc0800000 Loading: *################################################################# ################################################################# ########### 1.7 MiB/s done Bytes transferred = 2068905 (1f91a9 hex) U-Boot > tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'buildroot.cpio.gz.uboot'. Load address: 0xc0c00000 Loading: *############################################ 1.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot > printenv bootargs printenv bootargs bootargs=console=ttyS2,115200n8 debug earlyprintk U-Boot >bootz 0xc0800000 0xc0c00000 bootz 0xc0800000 0xc0c00000 Kernel image @ 0xc0800000 [ 0x000000 - 0x1f77a0 ] ## Loading init Ramdisk from Legacy Image at c0c00000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 40.76 seconds. # PYBOOT: Result: FAIL
mvebu_defconfig ---------------
armada-370-mirabox: FAIL: last 80 lines of boot log: ----------------------------------------------------
phy16= 72 phy16= 72 MMC: MRVL_MMC: 0 Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 3 0 Marvell>> Marvell>> version version
U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ Marvell>> setenv bootargs console=ttyS0,115200 debug earlyprintk setenv bootargs console=ttyS0,115200 debug earlyprintk Marvell>> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff Marvell>> if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Marvell>>if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Marvell>> setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Marvell>> dhcp dhcp phyaddr= 0 BOOTP broadcast 1 DHCP client bound to address 192.168.1.183 Marvell>> setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Marvell>> if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Marvell>tftp 0x02000000 192.168.1.2:tmp/mirabox-q9iauC/tmp6QBPzT-uImage
tftp 0x02000000 192.168.1.2:tmp/mirabox-q9iauC/tmp6QBPzT-uImage
Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'tmp/mirabox-q9iauC/tmp6QBPzT-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################### done Bytes transferred = 2654317 (28806d hex) Marvell>> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 642602 (9ce2a hex) Marvell>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk Marvell>> bootm 0x02000000 0x03000000 bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-04-03 1:02:10 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2654253 Bytes = 2.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 48.23 seconds. # PYBOOT: Result: FAIL