Automated DT boot report for various ARM defconfigs.
Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo').
Tree/Branch: arm-soc/fixes Git describe: v3.11-8713-g1e2c239 Commit: 1e2c2390ef i2c: davinci: Fix bad dev_get_platdata() conversion
Failed boot tests (console logs at the end) =========================================== imx6dl-wandboard,wand-solo: FAIL: arm-imx_v6_v7_defconfig imx6q-wandboard: FAIL: arm-multi_v7_defconfig
Full Report ===========
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.4 sec imx6dl-wandboard,wand-solo FAIL: 0 min 0.0 sec imx6q-wandboard PASS: 0 min 15.6 sec
arm-multi_v7_defconfig ---------------------- omap4-panda-es PASS: 1 min 10.6 sec omap3-beagle-xm PASS: 0 min 46.9 sec sun4i-a10-cubieboard PASS: 0 min 11.6 sec omap3-tobi,3530overo PASS: 0 min 41.6 sec am335x-bone,am335xboneb PASS: 0 min 32.1 sec am335x-bone,am335xbone PASS: 0 min 33.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec omap4-panda PASS: 0 min 59.5 sec imx6q-wandboard FAIL: 0 min 0.0 sec omap3-tobi,3730storm PASS: 0 min 43.7 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 47.7 sec
arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 29.4 sec
arm-omap2plus_defconfig ----------------------- omap3-beagle-xm PASS: 0 min 50.2 sec am335x-bone,am335xboneb PASS: 0 min 27.7 sec am335x-bone,am335xbone PASS: 0 min 26.8 sec omap3-tobi,3530overo PASS: 0 min 42.8 sec omap4-panda PASS: 1 min 2.8 sec omap4-panda-es PASS: 1 min 12.3 sec omap3-tobi,3730storm PASS: 0 min 42.3 sec omap3-beagle PASS: 0 min 49.8 sec
Console logs for failures =========================
arm-imx_v6_v7_defconfig -----------------------
imx6dl-wandboard,wand-solo: FAIL: last 24 lines of boot log: ------------------------------------------------------------
[<80301c94>] (platform_drv_probe+0x0/0x24) from [<8030095c>] (driver_probe_device+0x10c/0x224) [<80300850>] (driver_probe_device+0x0/0x224) from [<80300b08>] (__driver_attach+0x94/0x98) r7:00000000 r6:9f904044 r5:808175f8 r4:9f904010 [<80300a74>] (__driver_attach+0x0/0x98) from [<802feda0>] (bus_for_each_dev+0x5c/0x90) r6:80300a74 r5:808175f8 r4:00000000 r3:9f83b55c [<802fed44>] (bus_for_each_dev+0x0/0x90) from [<80300450>] (driver_attach+0x20/0x28) r6:80805548 r5:9f126300 r4:808175f8 [<80300430>] (driver_attach+0x0/0x28) from [<802fff90>] (bus_add_driver+0xdc/0x264) [<802ffeb4>] (bus_add_driver+0x0/0x264) from [<803011cc>] (driver_register+0x80/0xfc) r8:807ba0b8 r7:8078c46c r6:80825980 r5:00000006 r4:808175f8 [<8030114c>] (driver_register+0x0/0xfc) from [<80301ed0>] (__platform_driver_register+0x50/0x64) r5:00000006 r4:807da588 [<80301e80>] (__platform_driver_register+0x0/0x64) from [<807ba0d0>] (sdhci_esdhc_imx_driver_init+0x18/0x20) [<807ba0b8>] (sdhci_esdhc_imx_driver_init+0x0/0x20) from [<80008898>] (do_one_initcall+0xf4/0x154) [<800087a4>] (do_one_initcall+0x0/0x154) from [<8078cc10>] (kernel_init_freeable+0x104/0x1d0) [<8078cb0c>] (kernel_init_freeable+0x0/0x1d0) from [<805b6c8c>] (kernel_init+0x10/0xec) [<805b6c7c>] (kernel_init+0x0/0xec) from [<8000e978>] (ret_from_fork+0x14/0x3c) r4:00000000 r3:ffffffff Code: e89da800 e1a0c00d e92dd818 e24cb004 (e5903000) ---[ end trace 5d327b24e34a34fe ]--- Kernel panic - not~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL
arm-multi_v7_defconfig ----------------------
imx6q-wandboard: FAIL: last 24 lines of boot log: -------------------------------------------------
[ 1.005944] sit: IPv6 over IPv4 tunneling driver [ 1.011159] Key type dns_resolver registered [ 1.015569] Registering SWP/SWPB emulation handler [ 1.021613] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.026709] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.031620] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.054077] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.060103] hub 1-0:1.0: USB hub found [ 1.063900] hub 1-0:1.0: 1 port detected [ 1.068147] /work/kernel/jenkins/jobs/arm-soc/workspace/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.079193] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet:01, irq=-1) [ 1.090489] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.074361] libphy: 2188000.ethernet:01 - Link is Up - 100/Full [ 4.094099] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 4.114323] IP-Config: Complete: [ 4.117570] device=eth0, hwaddr=00:1f:7b:b4:01:83, ipaddr=192.168.1.181, mask=255.255.255.0, gw=255.255.255.255 [ 4.128126] host=192.168.1.181, domain=, nis-domain=(none) [ 4.134075] bootserver=192.168.1.2, rootserver=192.168.1.2, rootpath= [ 4.140785] nameserver0=192.168.1.254, nameserver1=109.0.0.0 [ 4.147750] Waiting for root device /dev/mmcblk0p2... [ 60.3143~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL