Automated DT boot report for various ARM defconfigs.
Tree/Branch: next Git describe: next-20140130 Failed boot tests (console logs at the end) =========================================== omap4-panda: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: omap2plus_defconfig omap3-tobi,3730storm: FAIL: omap2plus_defconfig sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig tegra30-beaver: FAIL: tegra_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig exynos5250-arndale: FAIL: exynos_defconfig ste-snowball: FAIL: multi_v7_defconfig tegra30-beaver: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig bcm28155-ap: FAIL: multi_v7_defconfig imx6q-wandboard: FAIL: multi_v7_defconfig omap3-tobi,3730storm: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig armada-370-mirabox: FAIL: mvebu_defconfig
Full Report ===========
omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 26.4 sec omap3-beagle-xm PASS: 0 min 58.5 sec am335x-bone PASS: 0 min 32.3 sec omap4-panda FAIL: 0 min 58.2 sec omap4-panda-es FAIL: 0 min 58.8 sec omap3-tobi,3730storm FAIL: 1 min 20.3 sec omap3-tobi,3530overo PASS: 0 min 22.9 sec
multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 FAIL: 0 min 19.8 sec
tegra_defconfig --------------- tegra30-beaver FAIL: 0 min 12.0 sec
imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.7 sec imx6q-wandboard FAIL: 0 min 20.8 sec
sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 17.5 sec sun4i-a10-cubieboard FAIL: 0 min 18.8 sec
bcm_defconfig ------------- bcm28155-ap PASS: 1 min 4.0 sec
exynos_defconfig ---------------- exynos5250-arndale FAIL: 0 min 34.3 sec
multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 33.3 sec tegra30-beaver FAIL: 0 min 24.2 sec am335x-boneblack PASS: 0 min 23.6 sec omap3-beagle-xm PASS: 0 min 48.1 sec sun7i-a20-cubieboard2 FAIL: 0 min 24.7 sec armada-370-mirabox FAIL: 0 min 29.0 sec omap4-panda FAIL: 0 min 56.6 sec omap4-panda-es FAIL: 0 min 57.8 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 31.6 sec sun4i-a10-cubieboard FAIL: 0 min 24.2 sec bcm28155-ap FAIL: 16 min 23.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.7 sec am335x-bone PASS: 0 min 25.9 sec imx6q-wandboard FAIL: 0 min 20.5 sec omap3-tobi,3730storm FAIL: 0 min 29.3 sec imx6dl-wandboard,wand-dual FAIL: 0 min 22.1 sec omap3-tobi,3530overo PASS: 0 min 21.4 sec
u8500_defconfig --------------- ste-snowball FAIL: 0 min 28.2 sec
sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.6 sec
mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 29.3 sec armada-370-mirabox FAIL: 0 min 27.9 sec
Console logs for failures =========================
omap2plus_defconfig -------------------
omap4-panda: FAIL: last 24 lines of boot log: ---------------------------------------------
8.8 KiB/s done Bytes transferred = 50077 (c39d hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f39c
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 58.17 seconds. # PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------
8.8 KiB/s done Bytes transferred = 50489 (c539 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 58.75 seconds. # PYBOOT: Result: FAIL
omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------
[ 5.978454] [<c008fc60>] (generic_handle_irq) from [<c000eda8>] (handle_IRQ+0x4c/0xb4) [ 5.986816] [<c000eda8>] (handle_IRQ) from [<c00085b4>] (omap3_intc_handle_irq+0x60/0x74) [ 5.995452] [<c00085b4>] (omap3_intc_handle_irq) from [<c054c424>] (__irq_svc+0x44/0x5c) [ 6.003997] Exception stack(0xde0efcc0 to 0xde0efd08) [ 6.009307] fcc0: de3b8480 01003600 fa0b4000 34020001 de0efd2c de3b8000 de3b8000 00008002 [ 6.017944] fce0: de4d5606 de4d5600 de0efde6 00000000 00000000 de0efd08 c044f6f4 c0438640 [ 6.026580] fd00: 20000113 ffffffff [ 6.030273] [<c054c424>] (__irq_svc) from [<c0438640>] (mmc_start_request+0xc4/0xe0) [ 6.038421] [<c0438640>] (mmc_start_request) from [<c0438768>] (__mmc_start_req+0x54/0x84) [ 6.047149] [<c0438768>] (__mmc_start_req) from [<c0438c08>] (mmc_wait_for_cmd+0x58/0x88) [ 6.055786] [<c0438c08>] (mmc_wait_for_cmd) from [<c0442704>] (mmc_io_rw_direct_host+0xa4/0x13c) [ 6.065032] [<c0442704>] (mmc_io_rw_direct_host) from [<c04434c8>] (sdio_read_cis+0x168/0x298) [ 6.074127] [<c04434c8>] (sdio_read_cis) from [<c04419ac>] (mmc_sdio_init_card+0x3e0/0xaa4) [ 6.082946] [<c04419ac>] (mmc_sdio_init_card) from [<c0442378>] (mmc_attach_sdio+0x78/0x360) [ 6.091857] [<c0442378>] (mmc_attach_sdio) from [<c043aec8>] (mmc_rescan+0x260/0x2e8) [ 6.100097] [<c043aec8>] (mmc_rescan) from [<c005917c>] (process_one_work+0x1ac/0x4c4) [ 6.108459] [<c005917c>] (process_one_work) from [<c005a014>] (worker_thread+0x114/0x3b4) [ 6.117095] [<c005a014>] (worker_thread) from [<c005fc08>] (kthread+0xcc/0xe8) [ 6.124725] [<c005fc08>] (kthread) from [<c000e548>] (ret_from_fork+0x14/0x2c) [ 6.132324] ---[ end trace d01bc6cc5911634f ]--- ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 80.30 seconds. # PYBOOT: Result: FAIL
multi_lpae_defconfig --------------------
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: -------------------------------------------------------
sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x4437f8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.82 seconds. # PYBOOT: Result: FAIL
tegra_defconfig ---------------
tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------
[ 0.000000] r10: ffffffff r9 : ffffffff r8 : 3fefffc0 [ 0.000000] r7 : ffffffff r6 : 0000001c r5 : 00000040 r4 : 00000000 [ 0.000000] r3 : 00000000 r2 : 00000000 r1 : ffffffdc r0 : 3fefffc0 [ 0.000000] Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c5387d Table: 8000404a DAC: 00000015 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc07ce240) [ 0.000000] Stack: (0xc07cfef4 to 0xc07d0000) [ 0.000000] fee0: c079da18 ffffffff c001bad8 [ 0.000000] ff00: ffffffff 00000000 c06b9b1c c07e1b78 00000000 ffffffff 0000001c c079dbec [ 0.000000] ff20: ffffffff c07d63f4 00080800 c0800000 ffff1000 000ae7f5 00001000 00000007 [ 0.000000] ff40: 00000200 c07b8000 c07b8000 c07d63c8 c06b9b1c c07e1b78 c07dae70 c081d680 [ 0.000000] ff60: c085b20c c0790fa8 ffffffff 10c5387d c07dae70 c081d540 00000001 ffffffff [ 0.000000] ff80: c07ce000 00000000 c07d63c0 00000000 00000000 c0575f70 c06b869c c081d540 [ 0.000000] ffa0: 00000001 ffffffff c07ce000 00000000 c07d63c0 00000000 00000000 c078e838 [ 0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c07bbd78 10c5387d c07d640c [ 0.000000] ffe0: c07bbd74 c07daf80 8000406a 412fc099 00000000 80008074 00000000 00000000 [ 0.000000] Code: e3110020 18a0500c 18a0500c e3110010 (18a0500c) [ 0.000000] ---[ end trace 3406ff24bd97382e ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address 3fefffc0
# PYBOOT: Time: 12.04 seconds. # PYBOOT: Result: FAIL
imx_v6_v7_defconfig -------------------
imx6q-wandboard: FAIL: last 24 lines of boot log: -------------------------------------------------
Bytes transferred = 25751 (6497 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4e5800 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009496
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.84 seconds. # PYBOOT: Result: FAIL
sunxi_defconfig ---------------
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: -------------------------------------------------------
sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b05f8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 17.49 seconds. # PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------
sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b05f8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.75 seconds. # PYBOOT: Result: FAIL
exynos_defconfig ----------------
exynos5250-arndale: FAIL: last 24 lines of boot log: ----------------------------------------------------
tftp 0x407c0000 192.168.1.2:tmp/arndale-KsQ1Mq/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.167 Filename 'tmp/arndale-KsQ1Mq/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 33440 (82a0 hex) ARNDALE5250 #printenv bootargs printenv bootargs bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.167:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none ARNDALE5250 # bootz 0x40800000 - 0x407c0000 bootz 0x40800000 - 0x407c0000 ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Using Device Tree in place at 407c0000, end 407cb29f
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 34.26 seconds. # PYBOOT: Result: FAIL
multi_v7_defconfig ------------------
ste-snowball: FAIL: last 24 lines of boot log: ----------------------------------------------
################################################################# ############################################## done Bytes transferred = 4481177 (446099 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4481113 Bytes = 4.3 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.33 seconds. # PYBOOT: Result: FAIL
tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------
Bytes transferred = 23808 (5d00 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000 bootz 0x81000000 0x82000000 0x83000000 Kernel image @ 0x81000000 [ 0x000000 - 0x43d5a0 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83008cff
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 24.23 seconds. # PYBOOT: Result: FAIL
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: -------------------------------------------------------
sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x43d5a0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 24.72 seconds. # PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log: ----------------------------------------------------
Image Name: Linux Created: 2014-01-30 5:07:19 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4455810 Bytes = 4.2 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.04 seconds. # PYBOOT: Result: FAIL
omap4-panda: FAIL: last 24 lines of boot log: ---------------------------------------------
5.9 KiB/s done Bytes transferred = 50077 (c39d hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f39c
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 56.61 seconds. # PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------
8.8 KiB/s done Bytes transferred = 50489 (c539 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 57.83 seconds. # PYBOOT: Result: FAIL
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------
Image Name: Linux Created: 2014-01-30 5:10:27 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4460484 Bytes = 4.3 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 31.59 seconds. # PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------
sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x43d5a0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 24.20 seconds. # PYBOOT: Result: FAIL
bcm28155-ap: FAIL: last 24 lines of boot log: ---------------------------------------------
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__ _call(self.context, command, ignore_failure, timeout) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call context.run_command(cmd, failok=ignore_failure) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command rc = subprocess.check_call(command, **output_args) File "/usr/lib/python2.7/subprocess.py", line 511, in check_call raise CalledProcessError(retcode, cmd) CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124 <LAVA_DISPATCHER>2014-01-30 05:30:19 AM INFO: CriticalError <LAVA_DISPATCHER>2014-01-30 05:30:19 AM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.). ErrorMessage: Failed to boot test image. Lava failed at action boot_linaro_image with error:Failed to boot test image. Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run action.run(**params) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run raise CriticalError("Failed to boot test image.") CriticalError: Failed to boot test image. Reboot: capri ; ip9258 1 3 : ['off'] <LAVA_DISPATCHER>2014-01-30 05:30:19 AM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/%27%7D <LAVA_DISPATCHER>2014-01-30 05:30:20 AM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/f042c2596abf5a6526ec1a22d9cf1c7c7... LBOOT: Result: FAIL LBOOT: Time: 983.48 seconds.
imx6q-wandboard: FAIL: last 24 lines of boot log: -------------------------------------------------
Bytes transferred = 25751 (6497 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x43d5a0 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009496
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.47 seconds. # PYBOOT: Result: FAIL
omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------
smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/3730storm-IqdbQb/omap3-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.3 MiB/s done Bytes transferred = 56692 (dd74 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffef000, end 8ffffd73 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.26 seconds. # PYBOOT: Result: FAIL
imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log: ------------------------------------------------------------
1.5 MiB/s done Bytes transferred = 24398 (5f4e hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.165:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11008f4d
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.12 seconds. # PYBOOT: Result: FAIL
u8500_defconfig ---------------
ste-snowball: FAIL: last 24 lines of boot log: ----------------------------------------------
################################################################# ###### done Bytes transferred = 2939433 (2cda29 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2939369 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.18 seconds. # PYBOOT: Result: FAIL
mvebu_defconfig ---------------
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------
Image Name: Linux Created: 2014-01-30 5:39:42 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2773612 Bytes = 2.6 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.27 seconds. # PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log: ----------------------------------------------------
Image Name: Linux Created: 2014-01-30 5:39:14 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2768938 Bytes = 2.6 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.89 seconds. # PYBOOT: Result: FAIL