next boot: 2 pass, 37 fail (next-20140220)

20 Feb 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: next
Git describe: next-20140220
Failed boot tests (console logs at the end)
===========================================
      omap3-overo-storm-tobi:     FAIL:    omap2plus_defconfig
             omap3-beagle-xm:     FAIL:    omap2plus_defconfig
                 omap4-panda:     FAIL:    omap2plus_defconfig
            omap3-overo-tobi:     FAIL:    omap2plus_defconfig
                 am335x-bone:     FAIL:    omap2plus_defconfig
            am335x-boneblack:     FAIL:    omap2plus_defconfig
                  omap5-uevm:     FAIL:    omap2plus_defconfig
              omap4-panda-es:     FAIL:    omap2plus_defconfig
                  omap5-uevm:     FAIL:    multi_lpae_defconfig
       sun7i-a20-cubieboard2:     FAIL:    multi_lpae_defconfig
              tegra30-beaver:     FAIL:    tegra_defconfig
  imx6dl-wandboard,wand-dual:     FAIL:    imx_v6_v7_defconfig
  imx6dl-wandboard,wand-solo:     FAIL:    imx_v6_v7_defconfig
             imx6q-wandboard:     FAIL:    imx_v6_v7_defconfig
    qcom-apq8074-dragonboard:     FAIL:    msm_defconfig
       sun7i-a20-cubieboard2:     FAIL:    sunxi_defconfig
        sun4i-a10-cubieboard:     FAIL:    sunxi_defconfig
          exynos5250-arndale:     FAIL:    exynos_defconfig
                ste-snowball:     FAIL:    multi_v7_defconfig
              tegra30-beaver:     FAIL:    multi_v7_defconfig
            am335x-boneblack:     FAIL:    multi_v7_defconfig
             omap3-beagle-xm:     FAIL:    multi_v7_defconfig
       sun7i-a20-cubieboard2:     FAIL:    multi_v7_defconfig
          armada-370-mirabox:     FAIL:    multi_v7_defconfig
                 omap4-panda:     FAIL:    multi_v7_defconfig
  armada-xp-openblocks-ax3-4:     FAIL:    multi_v7_defconfig
        sun4i-a10-cubieboard:     FAIL:    multi_v7_defconfig
                 bcm28155-ap:     FAIL:    multi_v7_defconfig
            omap3-overo-tobi:     FAIL:    multi_v7_defconfig
  imx6dl-wandboard,wand-solo:     FAIL:    multi_v7_defconfig
                 am335x-bone:     FAIL:    multi_v7_defconfig
      omap3-overo-storm-tobi:     FAIL:    multi_v7_defconfig
                  omap5-uevm:     FAIL:    multi_v7_defconfig
             imx6q-wandboard:     FAIL:    multi_v7_defconfig
              omap4-panda-es:     FAIL:    multi_v7_defconfig
  imx6dl-wandboard,wand-dual:     FAIL:    multi_v7_defconfig
                ste-snowball:     FAIL:    u8500_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
      omap3-overo-storm-tobi     FAIL:    0 min 28.7 sec
             omap3-beagle-xm     FAIL:    0 min 56.7 sec
                 omap4-panda     FAIL:    0 min 59.1 sec
            omap3-overo-tobi     FAIL:    0 min 27.8 sec
                 am335x-bone     FAIL:    0 min 30.0 sec
            am335x-boneblack     FAIL:    0 min 28.0 sec
                  omap5-uevm     FAIL:    0 min 31.4 sec
              omap4-panda-es     FAIL:    0 min 59.7 sec
multi_lpae_defconfig
--------------------
                  omap5-uevm     FAIL:    0 min 57.0 sec
       sun7i-a20-cubieboard2     FAIL:    0 min 19.5 sec
tegra_defconfig
---------------
              tegra30-beaver     FAIL:    1 min 41.9 sec
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     FAIL:    0 min 22.8 sec
  imx6dl-wandboard,wand-solo     FAIL:    0 min 22.5 sec
             imx6q-wandboard     FAIL:    0 min 21.1 sec
msm_defconfig
-------------
    qcom-apq8074-dragonboard     FAIL:    18 min 34.6 sec
bcm_defconfig
-------------
                 bcm28155-ap     PASS:    0 min 59.0 sec
sunxi_defconfig
---------------
       sun7i-a20-cubieboard2     FAIL:    0 min 18.7 sec
        sun4i-a10-cubieboard     FAIL:    0 min 23.3 sec
exynos_defconfig
----------------
          exynos5250-arndale     FAIL:    0 min 34.3 sec
multi_v7_defconfig
------------------
                ste-snowball     FAIL:    0 min 33.4 sec
              tegra30-beaver     FAIL:    0 min 24.8 sec
            am335x-boneblack     FAIL:    0 min 28.6 sec
             omap3-beagle-xm     FAIL:    0 min 53.0 sec
       sun7i-a20-cubieboard2     FAIL:    0 min 20.1 sec
          armada-370-mirabox     FAIL:    0 min 29.2 sec
                 omap4-panda     FAIL:    1 min  1.3 sec
  armada-xp-openblocks-ax3-4     FAIL:    0 min 31.6 sec
        sun4i-a10-cubieboard     FAIL:    0 min 19.4 sec
                 bcm28155-ap     FAIL:    16 min 34.1 sec
            omap3-overo-tobi     FAIL:    0 min 27.7 sec
  imx6dl-wandboard,wand-solo     FAIL:    0 min 22.2 sec
                 am335x-bone     FAIL:    0 min 30.3 sec
      omap3-overo-storm-tobi     FAIL:    0 min 26.0 sec
                  omap5-uevm     FAIL:    0 min 31.4 sec
             imx6q-wandboard     FAIL:    0 min 20.8 sec
              omap4-panda-es     FAIL:    0 min 56.0 sec
  imx6dl-wandboard,wand-dual     FAIL:    0 min 22.1 sec
u8500_defconfig
---------------
                ste-snowball     FAIL:    0 min 31.4 sec
sama5_defconfig
---------------
                  sama5d35ek     PASS:    0 min 17.1 sec
Console logs for failures
=========================
omap2plus_defconfig
-------------------
omap3-overo-storm-tobi: FAIL: last 80 lines of boot log:
    --------------------------------------------------------
Die ID #3dea00029ff80000016830c40802e016
Net:   smc911x-0
Warning: smc911x-0 using MAC address from net device
Hit any key to stop autoboot:  
5  0 
Overo # 
Overo # version
version
U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05)
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
Overo # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
Overo # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
Overo # if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
Overo # if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
Overo # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Overo # dhcp
dhcp
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 00:15:c9:28:f0:11
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound setenv serverip 192.168.1.2
to address 192.168.1.195
Overo # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
Overo # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3730storm-qr51BV/zImage
Overo # tftp ${loadaddr} 192.168.1.2:tmp/3730storm-qr51BV/zImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 00:15:c9:28:f0:11
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.195
Filename 'tmp/3730storm-qr51BV/zImage'.
Load address: 0x82000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################
     2.4 MiB/s
done
Bytes transferred = 4299688 (419ba8 hex)
Overo # tftp 0x81f00000 192.168.1.2:tmp/3730storm-qr51BV/omap3-overo-storm-tobi.dtb
tftp 0x81f00000 192.168.1.2:tmp/3730storm-qr51BV/omap3-overo-storm-tobi.dtb
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 00:15:c9:28:f0:11
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.195
Filename 'tmp/3730storm-qr51BV/omap3-overo-storm-tobi.dtb'.
Load address: 0x81f00000
Loading: *####
     2.3 MiB/s
done
Bytes transferred = 57128 (df28 hex)
Overo # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.195:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Overo # bootz ${loadaddr} - 0x81f00000
bootz ${loadaddr} - 0x81f00000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Device Tree to 8ffef000, end 8fffff27 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.74 seconds.
# PYBOOT: Result: FAIL
omap3-beagle-xm: FAIL: last 80 lines of boot log:
    -------------------------------------------------
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
OMAP3 beagleboard.org # dhcp
dhcp
ERROR: Need valid 'usbnet_devaddr' to be set
at ether.c:2369/usb_eth_init()
Waiting for Ethernet connection... done.
BOOTP broadcast 1
EHCI timed out on TD - token=0x8008d80
BOOTP broadcast 2
DHCP client boundsetenv serverip 192.168.1.2
 to address 192.168.1.190
OMAP3 beagleboard.org # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3730xm-zZOZIP/zImage
OMAP3 beagleboard.org # tftp ${loadaddr} 192.168.1.2:tmp/3730xm-zZOZIP/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.190
Filename 'tmp/3730xm-zZOZIP/zImage'.
Load address: 0x80200000
Loading: *EHCI timed out on TD - token=0x8008d80
T #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################
     469.7 KiB/s
done
Bytes transferred = 4299688 (419ba8 hex)
OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.190
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *EHCI timed out on TD - token=0x8008d80
T ############################################
     118.2 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
OMAP3 beagleboard.org #tftp 0x81f00000 192.168.1.2:tmp/3730xm-zZOZIP/omap3-beagle-xm.dtb
 tftp 0x81f00000 192.168.1.2:tmp/3730xm-zZOZIP/omap3-beagle-xm.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.190
Filename 'tmp/3730xm-zZOZIP/omap3-beagle-xm.dtb'.
Load address: 0x81f00000
Loading: *EHCI timed out on TD - token=0x88008d80
T ####
     4.9 KiB/s
done
Bytes transferred = 57382 (e026 hex)
OMAP3 beagleboard.org #printenv bootargs
 printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
OMAP3 beagleboard.org #bootz ${loadaddr} 0x81000000 0x81f00000
 bootz ${loadaddr} 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 8ff63000, end 8ffffdea ... OK
   Loading Device Tree to 8ff51000, end 8ff62025 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 56.66 seconds.
# PYBOOT: Result: FAIL
omap4-panda: FAIL: last 80 lines of boot log:
    ---------------------------------------------
if test -n ${preboot}; then run preboot; fi
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
Panda # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Panda # dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
EHCI timed out on TD - token=0x8008d80
BOOTP broadcast 2
DHCP client bound to addsetenv serverip 192.168.1.2
ress 192.168.1.152
Panda # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
Panda # if test -n ${netargs}; then run netargs; fitftp 0x82000000 192.168.1.2:tmp/4430panda-Zv0J_2/zImage
Panda # tftp 0x82000000 192.168.1.2:tmp/4430panda-Zv0J_2/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.152
Filename 'tmp/4430panda-Zv0J_2/zImage'.
Load address: 0x82000000
Loading: *EHCI timed out on TD - token=0x8008d80
T #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################
     440.4 KiB/s
done
Bytes transferred = 4299688 (419ba8 hex)
Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.152
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *EHCI timed out on TD - token=0x88008d80
T ############################################
     76.2 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
Panda # tftp 0x81f00000 192.168.1.2:tmp/4430panda-Zv0J_2/omap4-panda.dtb
tftp 0x81f00000 192.168.1.2:tmp/4430panda-Zv0J_2/omap4-panda.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.152
Filename 'tmp/4430panda-Zv0J_2/omap4-panda.dtb'.
Load address: 0x81f00000
Loading: *EHCI timed out on TD - token=0x88008d80
T ####
     8.8 KiB/s
done
Bytes transferred = 50077 (c39d hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f0f39c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 59.14 seconds.
# PYBOOT: Result: FAIL
omap3-overo-tobi: FAIL: last 80 lines of boot log:
    --------------------------------------------------
Overo # if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
Overo # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Overo # dhcp
dhcp
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC fe:06:88:cd:08:6f
BOOTP broadcast 1
DHCP client bound to addsetenv serverip 192.168.1.2
ress 192.168.1.155
Overo # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
Overo # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3530overo-ol9l1V/zImage
Overo # tftp ${loadaddr} 192.168.1.2:tmp/3530overo-ol9l1V/zImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC fe:06:88:cd:08:6f
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.155
Filename 'tmp/3530overo-ol9l1V/zImage'.
Load address: 0x82000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################
     2.4 MiB/s
done
Bytes transferred = 4299688 (419ba8 hex)
Overo # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC fe:06:88:cd:08:6f
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.155
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *############################################
     2.4 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
Overo #tftp 0x81f00000 192.168.1.2:tmp/3530overo-ol9l1V/omap3-overo-tobi.dtb
 tftp 0x81f00000 192.168.1.2:tmp/3530overo-ol9l1V/omap3-overo-tobi.dtb
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC fe:06:88:cd:08:6f
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.155
Filename 'tmp/3530overo-ol9l1V/omap3-overo-tobi.dtb'.
Load address: 0x81f00000
Loading: *####
     2.3 MiB/s
done
Bytes transferred = 56720 (dd90 hex)
Overo # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.155:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Overo #bootz ${loadaddr} 0x81000000 0x81f00000
 bootz ${loadaddr} 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 8ff63000, end 8ffffdea ... OK
   Loading Device Tree to 8ff52000, end 8ff62d8f ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 27.77 seconds.
# PYBOOT: Result: FAIL
am335x-bone: FAIL: last 80 lines of boot log:
    ---------------------------------------------
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi
U-Boot# if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi
U-Boot# if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no
U-Boot# setenv autoload no; setenv autoboot nodhcp
U-Boot# dhcp
cpsw Waiting for PHY auto negotiation to complete.. done
link up on port 0, speed 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to addressetenv serverip 192.168.1.2
s 192.168.1.198
U-Boot# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
U-Boot# if test -n ${netargs}; then run netargs; fitftp 0x80200000 192.168.1.2:tmp/am335xbone-UBbhpp/zImage
U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xbone-UBbhpp/zImage
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.198
Filename 'tmp/am335xbone-UBbhpp/zImage'.
Load address: 0x80200000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################
     1.2 MiB/s
done
Bytes transferred = 4299688 (419ba8 hex)
U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.198
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *############################################
     1.1 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xbone-UBbhpp/am335x-bone.dtb
tftp 0x81f00000 192.168.1.2:tmp/am335xbone-UBbhpp/am335x-bone.dtb
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.198
Filename 'tmp/am335xbone-UBbhpp/am335x-bone.dtb'.
Load address: 0x81f00000
Loading: *##
     1.1 MiB/s
done
Bytes transferred = 28596 (6fb4 hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.198:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U-Boot# bootz 0x80200000 0x81000000 0x81f00000
bootz 0x80200000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 8f19a000, end 8f236dea ... OK
   Using Device Tree in place at 81f00000, end 81f09fb3
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 30.01 seconds.
# PYBOOT: Result: FAIL
am335x-boneblack: FAIL: last 80 lines of boot log:
    --------------------------------------------------
GNU ld (GNU Binutils) 2.22
U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
U-Boot#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
 setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
U-Boot#if test -n ${initenv}; then run initenv; fi
 if test -n ${initenv}; then run initenv; fi
U-Boot# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
U-Boot#setenv autoload no; setenv autoboot no
 setenv autoload no; setenv autoboot no
U-Boot# dhcp
dhcp
cpsw Waiting for PHY auto negotiation to complete.. done
link up on port 0, speed 100, full duplex
BOOTP broadcast 1
DHCP client bound tosetenv serverip 192.168.1.2
 address 192.168.1.150
U-Boot# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
U-Boot# if test -n ${netargs}; then run netargs; fitftp 0x80200000 192.168.1.2:tmp/am335xboneb-RmX0XG/zImage
U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xboneb-RmX0XG/zImage
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.150
Filename 'tmp/am335xboneb-RmX0XG/zImage'.
Load address: 0x80200000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################
     1.2 MiB/s
done
Bytes transferred = 4299688 (419ba8 hex)
U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.150
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *############################################
     1.2 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-RmX0XG/am335x-boneblack.dtb
tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-RmX0XG/am335x-boneblack.dtb
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.150
Filename 'tmp/am335xboneb-RmX0XG/am335x-boneblack.dtb'.
Load address: 0x81f00000
Loading: *##
     1.1 MiB/s
done
Bytes transferred = 29192 (7208 hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.150:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U-Boot# bootz 0x80200000 0x81000000 0x81f00000
bootz 0x80200000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 9f19a000, end 9f236dea ... OK
   Using Device Tree in place at 81f00000, end 81f0a207
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.02 seconds.
# PYBOOT: Result: FAIL
omap5-uevm: FAIL: last 80 lines of boot log:
    --------------------------------------------
Connected to omap5uevm console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Connected.
Command(omap5uevm console)> hardreset
(user:khilman) Reboot omap5uevm
Connected.
Disconnected.
Reboot: omap5uevm ; phidget 1 2 :  off, sleep, on
found: 002/121 2
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.39 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 80 lines of boot log:
    ------------------------------------------------
if test -n ${preboot}; then run preboot; fi
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
Panda # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Panda # dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
EHCI timed out on TD - token=0x8008d80
BOOTP broadcast 2
DHCP client bound to addressetenv serverip 192.168.1.2
s 192.168.1.157
Panda # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
Panda # if test -n ${netargs}; then run netargs; fitftp 0x82000000 192.168.1.2:tmp/4460panda-es-zKtpWn/zImage
Panda # tftp 0x82000000 192.168.1.2:tmp/4460panda-es-zKtpWn/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.157
Filename 'tmp/4460panda-es-zKtpWn/zImage'.
Load address: 0x82000000
Loading: *EHCI timed out on TD - token=0x8008d80
T #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################
     469.7 KiB/s
done
Bytes transferred = 4299688 (419ba8 hex)
Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.157
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *EHCI timed out on TD - token=0x88008d80
T ############################################
     118.2 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
Panda # tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-zKtpWn/omap4-panda-es.dtb
tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-zKtpWn/omap4-panda-es.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.157
Filename 'tmp/4460panda-es-zKtpWn/omap4-panda-es.dtb'.
Load address: 0x81f00000
Loading: *EHCI timed out on TD - token=0x8008d80
T ####
     4.9 KiB/s
done
Bytes transferred = 50489 (c539 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 59.70 seconds.
# PYBOOT: Result: FAIL
multi_lpae_defconfig
--------------------
omap5-uevm: FAIL: last 80 lines of boot log:
    --------------------------------------------
USB0:   USB EHCI 1.00
scanning bus 0 for devices... found: 002/121 2
3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
U-Boot# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
U-Boot# dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
EHCI timed out on TD - token=0x8008d80
BOOTP broadcast 2
DHCP client bound tsetenv serverip 192.168.1.2
o address 192.168.1.201
U-Boot# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
U-Boot# if test -n ${netargs}; then run netargs; fitftp 0x82000000 192.168.1.2:tmp/omap5uevm-UN6Kav/zImage
U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-UN6Kav/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.201
Filename 'tmp/omap5uevm-UN6Kav/zImage'.
Load address: 0x82000000
Loading: *T #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################
     444.3 KiB/s
done
Bytes transferred = 4529440 (451d20 hex)
U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.201
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *EHCI timed out on TD - token=0x8008d80
T ############################################
     92.8 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-UN6Kav/omap5-uevm.dtb
tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-UN6Kav/omap5-uevm.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.201
Filename 'tmp/omap5uevm-UN6Kav/omap5-uevm.dtb'.
Load address: 0x80f80000
Loading: *EHCI timed out on TD - token=0x8008d80
T ###
     7.8 KiB/s
done
Bytes transferred = 43833 (ab39 hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.201:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U-Boot# bootz 0x82000000 0x81000000 0x80f80000
bootz 0x82000000 0x81000000 0x80f80000
Kernel image @ 0x82000000 [ 0x000000 - 0x451d20 ]
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   Using Device Tree in place at 80f80000, end 80f8db38
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 56.96 seconds.
# PYBOOT: Result: FAIL
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log:
    -------------------------------------------------------
setenv ethaddr 22:71:81:DA:53:EA
sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
sun7i# setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sun7i# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sun7i# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sun7i# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sun7i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
DHCP client bound setenv serverip 192.168.1.2
to address 192.168.1.153
sun7i# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
sun7i# if test -n ${netargs}; then run netargs; fitftp 0x40008000 192.168.1.2:tmp/cubie2-cOW7Nm/zImage
sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-cOW7Nm/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-cOW7Nm/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################
     2.9 MiB/s
done
Bytes transferred = 4529440 (451d20 hex)
sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x42000000
Loading: *############################################
     2.8 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun7i#tftp 0x41000000 192.168.1.2:tmp/cubie2-cOW7Nm/sun7i-a20-cubieboard2.dtb
 tftp 0x41000000 192.168.1.2:tmp/cubie2-cOW7Nm/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-cOW7Nm/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
     1.9 MiB/s
done
Bytes transferred = 12228 (2fc4 hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x451d20 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40ffefc3 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.51 seconds.
# PYBOOT: Result: FAIL
tegra_defconfig
---------------
tegra30-beaver: FAIL: last 80 lines of boot log:
    ------------------------------------------------
DHCP client bound tosetenv serverip 192.168.1.2
 address 192.168.1.224
Tegra30 (Beaver) # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
Tegra30 (Beaver) # if test -n ${netargs}; then run netargs; fitftp 0x81000000 192.168.1.2:tmp/beaver-6lFF8U/zImage
Tegra30 (Beaver) # tftp 0x81000000 192.168.1.2:tmp/beaver-6lFF8U/zImage
Using asx0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.224
Filename 'tmp/beaver-6lFF8U/zImage'.
Load address: 0x81000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #############################
     2.2 MiB/s
done
Bytes transferred = 4234552 (409d38 hex)
Tegra30 (Beaver) # tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot
Using asx0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.224
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x82000000
Loading: *############################################
     2.2 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
Tegra30 (Beaver) # tftp 0x83000000 192.168.1.2:tmp/beaver-6lFF8U/tegra30-beaver.dtb
tftp 0x83000000 192.168.1.2:tmp/beaver-6lFF8U/tegra30-beaver.dtb
Using asx0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.224
Filename 'tmp/beaver-6lFF8U/tegra30-beaver.dtb'.
Load address: 0x83000000
Loading: *##
     1.9 MiB/s
done
Bytes transferred = 23852 (5d2c hex)
Tegra30 (Beaver) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 debug earlyprintk
Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000
bootz 0x81000000 0x82000000 0x83000000
Kernel image @ 0x81000000 [ 0x000000 - 0x409d38 ]
## Loading init Ramdisk from Legacy Image at 82000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Using Device Tree in place at 83000000, end 83008d2b
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14.0-rc3-next-20140220 (build@brutus) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Wed Feb 19 23:40:04 PST 2014
[    0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: NVIDIA Tegra30 Beaver evaluation board
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] cma: CMA: reserved 16 MiB at ae800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 524032
[    0.000000] free_area_init_node: node 0, pgdat c0841580, node_mem_map ed7f0000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2574 pages used for memmap
[    0.000000]   HighMem zone: 329472 pages, LIFO batch:31
~$off
# PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'>
# PYBOOT: Time: 101.92 seconds.
# PYBOOT: Result: FAIL
imx_v6_v7_defconfig
-------------------
imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
version
U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22)
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1
GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809
=> setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
=> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
=> dhcp
dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound setenv serverip 192.168.1.2
to address 192.168.1.156
=> setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
=> if test -n ${netargs}; then run netargs; fitftp 0x10800000 192.168.1.2:tmp/wand-dual-YinV9B/zImage
=> tftp 0x10800000 192.168.1.2:tmp/wand-dual-YinV9B/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/wand-dual-YinV9B/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #############################
     1.5 MiB/s
done
Bytes transferred = 5186360 (4f2338 hex)
=> tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x11100000
Loading: *############################################
     1.5 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=>tftp 0x11000000 192.168.1.2:tmp/wand-dual-YinV9B/imx6dl-wandboard.dtb
 tftp 0x11000000 192.168.1.2:tmp/wand-dual-YinV9B/imx6dl-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/wand-dual-YinV9B/imx6dl-wandboard.dtb'.
Load address: 0x11000000
Loading: *##
     1.4 MiB/s
done
Bytes transferred = 24418 (5f62 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 11008f61
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 22.77 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
version
U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11)
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1
GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809
=> setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
=> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=>if test -n ${preboot}; then run preboot; fi
 if test -n ${preboot}; then run preboot; fi
=> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
=> dhcp
dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound tosetenv serverip 192.168.1.2
 address 192.168.1.164
=> setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
=> if test -n ${netargs}; then run netargs; fitftp 0x10800000 192.168.1.2:tmp/wand-solo-tFl8IG/zImage
=> tftp 0x10800000 192.168.1.2:tmp/wand-solo-tFl8IG/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'tmp/wand-solo-tFl8IG/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #############################
     1.5 MiB/s
done
Bytes transferred = 5186360 (4f2338 hex)
=> tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x11100000
Loading: *############################################
     1.5 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x11000000 192.168.1.2:tmp/wand-solo-tFl8IG/imx6dl-wandboard.dtb
tftp 0x11000000 192.168.1.2:tmp/wand-solo-tFl8IG/imx6dl-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'tmp/wand-solo-tFl8IG/imx6dl-wandboard.dtb'.
Load address: 0x11000000
Loading: *##
     1.4 MiB/s
done
Bytes transferred = 24418 (5f62 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 11008f61
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 22.54 seconds.
# PYBOOT: Result: FAIL
imx6q-wandboard: FAIL: last 80 lines of boot log:
    -------------------------------------------------
U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29)
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
=> setenv bootargs console=ttymxc0,115200
setenv bootargs console=ttymxc0,115200
=> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
=> dhcp
dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound setenv serverip 192.168.1.2
to address 192.168.1.163
=> setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
=> if test -n ${netargs}; then run netargs; fitftp 0x10800000 192.168.1.2:tmp/wand-quad-vFBpFR/zImage
=> tftp 0x10800000 192.168.1.2:tmp/wand-quad-vFBpFR/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.163
Filename 'tmp/wand-quad-vFBpFR/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #############################
     2.7 MiB/s
done
Bytes transferred = 5186360 (4f2338 hex)
=> tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.163
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x11100000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x11000000 192.168.1.2:tmp/wand-quad-vFBpFR/imx6q-wandboard.dtb
tftp 0x11000000 192.168.1.2:tmp/wand-quad-vFBpFR/imx6q-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.163
Filename 'tmp/wand-quad-vFBpFR/imx6q-wandboard.dtb'.
Load address: 0x11000000
Loading: *##
     2.2 MiB/s
done
Bytes transferred = 25787 (64bb hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none
=>bootz 0x10800000 0x11100000 0x11000000
 bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x4f2338 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 110094ba
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 21.12 seconds.
# PYBOOT: Result: FAIL
msm_defconfig
-------------
qcom-apq8074-dragonboard: FAIL: last 80 lines of boot log:
    ----------------------------------------------------------
Reboot: dragon ; ip9258 2 3 :  ['off']
< waiting for device >
error: device not found
Reboot: dragon-usb ; phidget 3 4 :  off, sleep, on
Reboot: dragon ; ip9258 2 3 :  off, sleep, on
< waiting for device >
rebooting...
finished. total time: 0.005s
downloading 'boot.img'...
OKAY [  0.335s]
booting...
OKAY [  0.010s]
finished. total time: 0.346s
<LAVA_DISPATCHER>2014-02-20 08:53:56 AM INFO: Attempting to connect to device using: /usr/bin/conmux-console vence/dragon
Connected to dragon console [channel connected] (~$quit to exit)
(user:khilman) is already connected
<LAVA_DISPATCHER>2014-02-20 08:54:06 AM INFO: Matched <class 'pexpect.TIMEOUT'> which means all-good
<LAVA_DISPATCHER>2014-02-20 08:56:36 AM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2014-02-20 08:57:06 AM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2014-02-20 08:57:36 AM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2014-02-20 08:58:07 AM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2014-02-20 08:58:37 AM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2014-02-20 08:59:07 AM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2014-02-20 08:59:37 AM INFO: Boot linaro image failed: Timeout exceeded in read_nonblocking().
<lava_dispatcher.utils.logging_spawn object at 0xa07becc>
version: 2.4 ($Revision: 516 $)
command: /usr/bin/conmux-console
args: [u'/usr/bin/conmux-console', u'vence/dragon']
searcher: searcher_re:
    0: re.compile("/ #")
buffer (last 100 chars): nected to dragon console [channel connected] (~$quit to exit)
(user:khilman) is already connected
before (last 100 chars): nected to dragon console [channel connected] (~$quit to exit)
(user:khilman) is already connected
after: <class 'pexpect.TIMEOUT'>
match: None
match_index: None
exitstatus: None
flag_eof: False
pid: 27847
child_fd: 5
closed: False
timeout: 1200
delimiter: <class 'pexpect.EOF'>
logfile: None
logfile_read: <lava_dispatcher.context.Flusher object at 0x97d65ec>
logfile_send: None
maxread: 2000
ignorecase: False
searchwindowsize: None
delaybeforesend: 0.05
delayafterclose: 0.1
delayafterterminate: 0.1
<LAVA_DISPATCHER>2014-02-20 08:59:37 AM CRITICAL: Could not get the test image booted properly
<LAVA_DISPATCHER>2014-02-20 08:59:37 AM ERROR: boot_linaro_image failed
Traceback (most recent call last):
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 105, in run
    client.boot_linaro_image()
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 530, in boot_linaro_image
    raise CriticalError(msg)
CriticalError: Could not get the test image booted properly
<LAVA_DISPATCHER>2014-02-20 08:59:37 AM INFO: CriticalError
<LAVA_DISPATCHER>2014-02-20 08:59:37 AM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.).
ErrorMessage: Failed to boot test image.
Lava failed at action boot_linaro_image with error:Failed to boot test image.
Traceback (most recent call last):
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run
    action.run(**params)
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run
    raise CriticalError("Failed to boot test image.")
CriticalError: Failed to boot test image.
Reboot: dragon-usb ; phidget 3 4 :  ['off']
Reboot: dragon ; ip9258 2 3 :  ['off']
<LAVA_DISPATCHER>2014-02-20 08:59:38 AM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/%27%7D
<LAVA_DISPATCHER>2014-02-20 08:59:38 AM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/b02901674c9e240e54471c5bb693804c9...
LBOOT: Result: FAIL
LBOOT: Time: 1114.64 seconds.
sunxi_defconfig
---------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log:
    -------------------------------------------------------
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
sun7i# setenv ethaddr 22:71:81:DA:53:EA
setenv ethaddr 22:71:81:DA:53:EA
sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
sun7i# setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sun7i# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sun7i# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sun7i# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sun7i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
DHCP client bound tsetenv serverip 192.168.1.2
o address 192.168.1.153
sun7i# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
sun7i# if test -n ${netargs}; then run netargs; fitftp 0x40008000 192.168.1.2:tmp/cubie2-s8CziE/zImage
sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-s8CziE/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-s8CziE/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     #########################################################
     2.7 MiB/s
done
Bytes transferred = 1777528 (1b1f78 hex)
sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x42000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-s8CziE/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 192.168.1.2:tmp/cubie2-s8CziE/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-s8CziE/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
     1.9 MiB/s
done
Bytes transferred = 12228 (2fc4 hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1b1f78 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40ffefc3 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 18.68 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 80 lines of boot log:
    ------------------------------------------------------
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
sun4i# setenv ethaddr 2e:40:70:f0:12:08
setenv ethaddr 2e:40:70:f0:12:08
sun4i#setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun4i#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
 setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
sun4i# setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sun4i# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sun4i# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sun4i# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sun4i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
DHCP client bound to adsetenv serverip 192.168.1.2
dress 192.168.1.160
sun4i# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
sun4i# if test -n ${netargs}; then run netargs; fitftp 0x40008000 192.168.1.2:tmp/cubie-LyzMe2/zImage
sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-LyzMe2/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.160
Filename 'tmp/cubie-LyzMe2/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     #########################################################
     2.7 MiB/s
done
Bytes transferred = 1777528 (1b1f78 hex)
sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.160
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x42000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun4i#tftp 0x41000000 192.168.1.2:tmp/cubie-LyzMe2/sun4i-a10-cubieboard.dtb
 tftp 0x41000000 192.168.1.2:tmp/cubie-LyzMe2/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.160
Filename 'tmp/cubie-LyzMe2/sun4i-a10-cubieboard.dtb'.
Load address: 0x41000000
Loading: *#
     2.1 MiB/s
done
Bytes transferred = 10881 (2a81 hex)
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1b1f78 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ffa000, end 40fffa80 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 23.33 seconds.
# PYBOOT: Result: FAIL
exynos_defconfig
----------------
exynos5250-arndale: FAIL: last 80 lines of boot log:
    ----------------------------------------------------
MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 1, EXYNOS DWMMC: 2
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 4 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
Hit any key to stop autoboot:
  3  0 
ARNDALE5250 # 
ARNDALE5250 # version
version
U-Boot 2013.01.-rc1-dirty (Jun 28 2013 - 07:14:48) for ARNDALE5250
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
ARNDALE5250 #setenv bootargs console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4
 setenv bootargs console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4
ARNDALE5250 # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
ARNDALE5250 # if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
ARNDALE5250 # if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 4 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
ARNDALE5250 # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
ARNDALE5250 # dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
DHCP client boundsetenv serverip 192.168.1.2
 to address 192.168.1.167
ARNDALE5250 # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
ARNDALE5250 # if test -n ${netargs}; then run netargs; fitftp 0x40800000 192.168.1.2:tmp/arndale-HugbGD/zImage
ARNDALE5250 # tftp 0x40800000 192.168.1.2:tmp/arndale-HugbGD/zImage
Waiting for Ethernet connection... done.
Using asx0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.167
Filename 'tmp/arndale-HugbGD/zImage'.
Load address: 0x40800000
Loading: *#################################################################
     #################################################################
     ###########################################################
done
Bytes transferred = 2772672 (2a4ec0 hex)
ARNDALE5250 #tftp 0x407c0000 192.168.1.2:tmp/arndale-HugbGD/exynos5250-arndale.dtb
 tftp 0x407c0000 192.168.1.2:tmp/arndale-HugbGD/exynos5250-arndale.dtb
Waiting for Ethernet connection... done.
Using asx0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.167
Filename 'tmp/arndale-HugbGD/exynos5250-arndale.dtb'.
Load address: 0x407c0000
Loading: *###
done
Bytes transferred = 33611 (834b hex)
ARNDALE5250 # printenv bootargs
printenv bootargs
bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.167:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
ARNDALE5250 # bootz 0x40800000 - 0x407c0000
bootz 0x40800000 - 0x407c0000
## Flattened Device Tree blob at 407c0000
   Booting using the fdt blob at 0x407c0000
   Using Device Tree in place at 407c0000, end 407cb34a
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 34.27 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
ste-snowball: FAIL: last 80 lines of boot log:
    ----------------------------------------------
(user:khilman) Reboot snowball
Reboot: snowball ; ip9258 2 2 :  ('off', 6, 'on')
, sleep 6,
MCDE:  startup failed
sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2
EMMC: 0, MMC: 1
In:    serial
Out:   serial
Err:   serial
Net:   smc911x-0
Hit any key to stop autoboot:  1  
0
U8500 $ 
U8500 $ version
U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e
U-Boot 2009.11 (sept. 19 2011 - 17:03:11)
U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4
Can't overwrite "ethaddr"
U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi
U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi
U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no
U8500 $ setenv autoload no; setenv autoboot nodhcp
U8500 $ dhcp
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 6e:e6:84:36:8e:9e
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to addresetenv serverip 192.168.1.2
ss 192.168.1.159
U8500 $ setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
U8500 $ if test -n ${netargs}; then run netargs; fitftp 0x00800000 192.168.1.2:tmp/snowball-WOjCYK/tmp5NcJTg-uImage
U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-WOjCYK/tmp5NcJTg-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 6e:e6:84:36:8e:9e
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.159
Filename 'tmp/snowball-WOjCYK/tmp5NcJTg-uImage'.
Load address: 0x800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ##################################################
done
Bytes transferred = 4540689 (454911 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000  
bootm 0x00800000  
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4540625 Bytes =  4.3 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 33.41 seconds.
# PYBOOT: Result: FAIL
tegra30-beaver: FAIL: last 80 lines of boot log:
    ------------------------------------------------
setenv fdt_high 0xffffffff
Tegra30 (Beaver) # if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
Tegra30 (Beaver) # if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 
Warning: asx0 using MAC address from net device
1 Ethernet Device(s) found
Tegra30 (Beaver) # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Tegra30 (Beaver) # dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
DHCP client bound to addrsetenv serverip 192.168.1.2
ess 192.168.1.224
Tegra30 (Beaver) # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
Tegra30 (Beaver) # if test -n ${netargs}; then run netargs; fitftp 0x81000000 192.168.1.2:tmp/beaver-8EwX5w/zImage
Tegra30 (Beaver) # tftp 0x81000000 192.168.1.2:tmp/beaver-8EwX5w/zImage
Using asx0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.224
Filename 'tmp/beaver-8EwX5w/zImage'.
Load address: 0x81000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################################
     2.2 MiB/s
done
Bytes transferred = 4505112 (44be18 hex)
Tegra30 (Beaver) # tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot
Using asx0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.224
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x82000000
Loading: *############################################
     2.2 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
Tegra30 (Beaver) # tftp 0x83000000 192.168.1.2:tmp/beaver-8EwX5w/tegra30-beaver.dtb
tftp 0x83000000 192.168.1.2:tmp/beaver-8EwX5w/tegra30-beaver.dtb
Using asx0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.224
Filename 'tmp/beaver-8EwX5w/tegra30-beaver.dtb'.
Load address: 0x83000000
Loading: *##
     2.1 MiB/s
done
Bytes transferred = 23852 (5d2c hex)
Tegra30 (Beaver) #printenv bootargs
 printenv bootargs
bootargs=console=ttyS0,115200n8 debug earlyprintk
Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000
bootz 0x81000000 0x82000000 0x83000000
Kernel image @ 0x81000000 [ 0x000000 - 0x44be18 ]
## Loading init Ramdisk from Legacy Image at 82000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Using Device Tree in place at 83000000, end 83008d2b
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 24.76 seconds.
# PYBOOT: Result: FAIL
am335x-boneblack: FAIL: last 80 lines of boot log:
    --------------------------------------------------
GNU ld (GNU Binutils) 2.22
U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
U-Boot# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
U-Boot# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
U-Boot#setenv autoload no; setenv autoboot no
 setenv autoload no; setenv autoboot no
U-Boot# dhcp
dhcp
cpsw Waiting for PHY auto negotiation to complete.. done
link up on port 0, speed 100, full duplex
BOOTP broadcast 1
DHCP client bound tsetenv serverip 192.168.1.2
o address 192.168.1.150
U-Boot# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
U-Boot# if test -n ${netargs}; then run netargs; fitftp 0x80200000 192.168.1.2:tmp/am335xboneb-WzmE0f/zImage
U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xboneb-WzmE0f/zImage
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.150
Filename 'tmp/am335xboneb-WzmE0f/zImage'.
Load address: 0x80200000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################################
     1.2 MiB/s
done
Bytes transferred = 4505112 (44be18 hex)
U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.150
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *############################################
     1.2 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot#tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-WzmE0f/am335x-boneblack.dtb
 tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-WzmE0f/am335x-boneblack.dtb
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.150
Filename 'tmp/am335xboneb-WzmE0f/am335x-boneblack.dtb'.
Load address: 0x81f00000
Loading: *##
     1.1 MiB/s
done
Bytes transferred = 29192 (7208 hex)
U-Boot#printenv bootargs
 printenv bootargs
bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.150:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U-Boot# bootz 0x80200000 0x81000000 0x81f00000
bootz 0x80200000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 9f19a000, end 9f236dea ... OK
   Using Device Tree in place at 81f00000, end 81f0a207
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.58 seconds.
# PYBOOT: Result: FAIL
omap3-beagle-xm: FAIL: last 80 lines of boot log:
    -------------------------------------------------
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
OMAP3 beagleboard.org #dhcp
 dhcp
ERROR: Need valid 'usbnet_devaddr' to be set
at ether.c:2369/usb_eth_init()
Waiting for Ethernet connection... done.
BOOTP broadcast 1
EHCI timed out on TD - token=0x8008d80
BOOTP broadcast 2
DHCP client boundsetenv serverip 192.168.1.2
 to address 192.168.1.190
OMAP3 beagleboard.org # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3730xm-5z1TtN/zImage
OMAP3 beagleboard.org # tftp ${loadaddr} 192.168.1.2:tmp/3730xm-5z1TtN/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.190
Filename 'tmp/3730xm-5z1TtN/zImage'.
Load address: 0x80200000
Loading: *EHCI timed out on TD - token=0x88008d80
T #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################################
     487.3 KiB/s
done
Bytes transferred = 4505112 (44be18 hex)
OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.190
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *EHCI timed out on TD - token=0x88008d80
T ############################################
     118.2 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
OMAP3 beagleboard.org # tftp 0x81f00000 192.168.1.2:tmp/3730xm-5z1TtN/omap3-beagle-xm.dtb
tftp 0x81f00000 192.168.1.2:tmp/3730xm-5z1TtN/omap3-beagle-xm.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.190
Filename 'tmp/3730xm-5z1TtN/omap3-beagle-xm.dtb'.
Load address: 0x81f00000
Loading: *EHCI timed out on TD - token=0x8008d80
T ####
     6.8 KiB/s
done
Bytes transferred = 57382 (e026 hex)
OMAP3 beagleboard.org # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
OMAP3 beagleboard.org #bootz ${loadaddr} 0x81000000 0x81f00000
 bootz ${loadaddr} 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 8ff63000, end 8ffffdea ... OK
   Loading Device Tree to 8ff51000, end 8ff62025 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 52.97 seconds.
# PYBOOT: Result: FAIL
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log:
    -------------------------------------------------------
setenv ethaddr 22:71:81:DA:53:EA
sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
sun7i# setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sun7i# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sun7i# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sun7i# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sun7i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
DHCP client bound to asetenv serverip 192.168.1.2
ddress 192.168.1.153
sun7i# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
sun7i# if test -n ${netargs}; then run netargs; fitftp 0x40008000 192.168.1.2:tmp/cubie2-B5trRd/zImage
sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-B5trRd/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-B5trRd/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################################
     2.7 MiB/s
done
Bytes transferred = 4505112 (44be18 hex)
sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x42000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-B5trRd/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 192.168.1.2:tmp/cubie2-B5trRd/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-B5trRd/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
     1.9 MiB/s
done
Bytes transferred = 12228 (2fc4 hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x44be18 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40ffefc3 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.08 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 80 lines of boot log:
    ----------------------------------------------------
MMC:   MRVL_MMC: 0
Net:   egiga0 [PRIME], egiga1
Hit any key to stop autoboot:  3 
 0 
Marvell>> 
Marvell>> version
version
U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ
Marvell>> setenv bootargs console=ttyS0,115200 debug earlyprintk
setenv bootargs console=ttyS0,115200 debug earlyprintk
Marvell>> setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
Marvell>> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
Marvell>> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
Marvell>> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Marvell>> dhcp
dhcp
phyaddr= 0
BOOTP broadcast 1
DHCP client bound setenv serverip 192.168.1.2
to address 192.168.1.183
Marvell>> setif test -n ${netargs}; then run netargs; fi
env serverip if test -n ${netargs}; then run netargs; fi
syntax error
Marvell>> tftp 0x02000000 192.168.1.2:tmp/mirabox-VpFOTW/tmpQ57egv-uImage
tftp 0x02000000 192.168.1.2:tmp/mirabox-VpFOTW/tmpQ57egv-uImage
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.183
Filename 'tmp/mirabox-VpFOTW/tmpQ57egv-uImage'.
Load address: 0x2000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ################################################
done
Bytes transferred = 4515934 (44e85e hex)
Marvell>>tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
 tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.183
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x3000000
Loading: *############################################
done
Bytes transferred = 642602 (9ce2a hex)
Marvell>>printenv bootargs
 printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk
Marvell>bootm 0x02000000 0x03000000
...
bootm 0x02000000 0x03000000
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux
   Created:      2014-02-20   8:07:11 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4515870 Bytes =  4.3 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 29.22 seconds.
# PYBOOT: Result: FAIL
omap4-panda: FAIL: last 80 lines of boot log:
    ---------------------------------------------
if test -n ${preboot}; then run preboot; fi
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
Panda # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Panda # dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
EHCI timed out on TD - token=0x8008d80
BOOTP broadcast 2
DHCP client bound tsetenv serverip 192.168.1.2
o address 192.168.1.152
Panda # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
Panda # if test -n ${netargs}; then run netargs; fitftp 0x82000000 192.168.1.2:tmp/4430panda-ZmzsNz/zImage
Panda # tftp 0x82000000 192.168.1.2:tmp/4430panda-ZmzsNz/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.152
Filename 'tmp/4430panda-ZmzsNz/zImage'.
Load address: 0x82000000
Loading: *EHCI timed out on TD - token=0x8008d80
T #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################################
     493.2 KiB/s
done
Bytes transferred = 4505112 (44be18 hex)
Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.152
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *EHCI timed out on TD - token=0x8008d80
T ############################################
     62.5 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
Panda # tftp 0x81f00000 192.168.1.2:tmp/4430panda-ZmzsNz/omap4-panda.dtb
tftp 0x81f00000 192.168.1.2:tmp/4430panda-ZmzsNz/omap4-panda.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.152
Filename 'tmp/4430panda-ZmzsNz/omap4-panda.dtb'.
Load address: 0x81f00000
Loading: *EHCI timed out on TD - token=0x8008d80
T ####
     8.8 KiB/s
done
Bytes transferred = 50077 (c39d hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f0f39c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 61.29 seconds.
# PYBOOT: Result: FAIL
armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
Hit any key to stop autoboot:  1
  0 
openblocks> 
openblocks> version
version
U-Boot 2011.12 (Aug 26 2013 - 13:08:34)
Plat'Home version: 2.0.7 (Marvell version: 2012_Q4.0p17)
arm-marvell-linux-gnueabi-gcc (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) 4.6.4 20120731 (prerelease)
GNU ld (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) 2.22.0.20120801
openblocks> setenv bootargs console=ttyS0,115200 debug earlyprintk
setenv bootargs console=ttyS0,115200 debug earlyprintk
openblocks> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
openblocks> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
openblocks> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
openblocks> dhcp
dhcp
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to asetenv serverip 192.168.1.2
ddress 192.168.1.158
openblocks> setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
openblocks> if test -n ${netargs}; then run netargs; fitftp 0x02000000 192.168.1.2:tmp/obsax3-Qu7_6C/tmprBSqi5-uImage
openblocks> tftp 0x02000000 192.168.1.2:tmp/obsax3-Qu7_6C/tmprBSqi5-uImage
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.158
Filename 'tmp/obsax3-Qu7_6C/tmprBSqi5-uImage'.
Load address: 0x2000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ################################################
done
Bytes transferred = 4520196 (44f904 hex)
openblocks>tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
 tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.158
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x3000000
Loading: *############################################
done
Bytes transferred = 642602 (9ce2a hex)
openblocks> printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk
openblocks>bootm 0x02000000 0x03000000 
 bootm 0x02000000 0x03000000 
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux
   Created:      2014-02-20   8:10:26 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4520132 Bytes = 4.3 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 31.61 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 80 lines of boot log:
    ------------------------------------------------------
setenv ethaddr 2e:40:70:f0:12:08
sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
sun4i# setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sun4i# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sun4i# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sun4i# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sun4i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
DHCP client bound to asetenv serverip 192.168.1.2
ddress 192.168.1.160
sun4i# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
sun4i# if test -n ${netargs}; then run netargs; fitftp 0x40008000 192.168.1.2:tmp/cubie-mIbGz5/zImage
sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-mIbGz5/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.160
Filename 'tmp/cubie-mIbGz5/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################################
     2.7 MiB/s
done
Bytes transferred = 4505112 (44be18 hex)
sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.160
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x42000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-mIbGz5/sun4i-a10-cubieboard.dtb
tftp 0x41000000 192.168.1.2:tmp/cubie-mIbGz5/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.160
Filename 'tmp/cubie-mIbGz5/sun4i-a10-cubieboard.dtb'.
Load address: 0x41000000
Loading: *#
     2.1 MiB/s
done
Bytes transferred = 10881 (2a81 hex)
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x44be18 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ffa000, end 40fffa80 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.39 seconds.
# PYBOOT: Result: FAIL
bcm28155-ap: FAIL: last 80 lines of boot log:
    ---------------------------------------------
<LAVA_DISPATCHER>2014-02-20 08:19:24 AM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2014-02-20 08:19:55 AM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2014-02-20 08:20:25 AM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2014-02-20 08:20:55 AM INFO: Boot linaro image failed: Timeout exceeded in read_nonblocking().
<lava_dispatcher.utils.logging_spawn object at 0x982202c>
version: 2.4 ($Revision: 516 $)
command: /usr/bin/conmux-console
args: [u'/usr/bin/conmux-console', u'vence/capri']
searcher: searcher_re:
    0: re.compile("root@bcm-capri-board:~#")
buffer (last 100 chars):  0x9e000000
   Using Device Tree in place at 9e000000, end 9e004657
Starting kernel ...
before (last 100 chars):  0x9e000000
   Using Device Tree in place at 9e000000, end 9e004657
Starting kernel ...
after: <class 'pexpect.TIMEOUT'>
match: None
match_index: None
exitstatus: None
flag_eof: False
pid: 31708
child_fd: 3
closed: False
timeout: 1200
delimiter: <class 'pexpect.EOF'>
logfile: None
logfile_read: <lava_dispatcher.context.Flusher object at 0x914f60c>
logfile_send: None
maxread: 2000
ignorecase: False
searchwindowsize: None
delaybeforesend: 0.05
delayafterclose: 0.1
delayafterterminate: 0.1
<LAVA_DISPATCHER>2014-02-20 08:20:55 AM INFO: Booting the test image. Attempt: 2
< waiting for device >
<LAVA_DISPATCHER>2014-02-20 08:20:57 AM INFO: Perform hard reset on the system
Reboot: capri ; ip9258 1 3 :  off, sleep, on
< waiting for device >
<LAVA_DISPATCHER>2014-02-20 08:30:59 AM ERROR: boot_linaro_image failed
Traceback (most recent call last):
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 105, in run
    client.boot_linaro_image()
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 508, in boot_linaro_image
    self._boot_linaro_image()
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 481, in _boot_linaro_image
    self.proc = self.target_device.power_on()
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/capri.py", line 114, in power_on
    self.fastboot('reboot')
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__
    _call(self.context, command, ignore_failure, timeout)
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call
    context.run_command(cmd, failok=ignore_failure)
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command
    rc = subprocess.check_call(command, **output_args)
  File "/usr/lib/python2.7/subprocess.py", line 511, in check_call
    raise CalledProcessError(retcode, cmd)
CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124
<LAVA_DISPATCHER>2014-02-20 08:30:59 AM INFO: CriticalError
<LAVA_DISPATCHER>2014-02-20 08:30:59 AM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.).
ErrorMessage: Failed to boot test image.
Lava failed at action boot_linaro_image with error:Failed to boot test image.
Traceback (most recent call last):
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run
    action.run(**params)
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run
    raise CriticalError("Failed to boot test image.")
CriticalError: Failed to boot test image.
Reboot: capri ; ip9258 1 3 :  ['off']
<LAVA_DISPATCHER>2014-02-20 08:31:00 AM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/%27%7D
<LAVA_DISPATCHER>2014-02-20 08:31:00 AM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/04a66209783262ea115348ba280d8e037...
LBOOT: Result: FAIL
LBOOT: Time: 994.08 seconds.
omap3-overo-tobi: FAIL: last 80 lines of boot log:
    --------------------------------------------------
Overo #if test -n ${preboot}; then run preboot; fi
 if test -n ${preboot}; then run preboot; fi
Overo #setenv autoload no; setenv autoboot no
 setenv autoload no; setenv autoboot no
Overo # dhcp
dhcp
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC fe:06:88:cd:08:6f
BOOTP broadcast 1
DHCP client bound to setenv serverip 192.168.1.2
address 192.168.1.155
Overo # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
Overo # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3530overo-rTxcee/zImage
Overo # tftp ${loadaddr} 192.168.1.2:tmp/3530overo-rTxcee/zImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC fe:06:88:cd:08:6f
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.155
Filename 'tmp/3530overo-rTxcee/zImage'.
Load address: 0x82000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################################
     2.5 MiB/s
done
Bytes transferred = 4505112 (44be18 hex)
Overo # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC fe:06:88:cd:08:6f
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.155
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *############################################
     2.5 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
Overo # tftp 0x81f00000 192.168.1.2:tmp/3530overo-rTxcee/omap3-overo-tobi.dtb
tftp 0x81f00000 192.168.1.2:tmp/3530overo-rTxcee/omap3-overo-tobi.dtb
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC fe:06:88:cd:08:6f
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.155
Filename 'tmp/3530overo-rTxcee/omap3-overo-tobi.dtb'.
Load address: 0x81f00000
Loading: *####
     2.4 MiB/s
done
Bytes transferred = 56720 (dd90 hex)
Overo # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.155:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Overo # bootz ${loadaddr} 0x81000000 0x81f00000
bootz ${loadaddr} 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 8ff63000, end 8ffffdea ... OK
   Loading Device Tree to 8ff52000, end 8ff62d8f ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 27.74 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
=> version
version
U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11)
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1
GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809
=> setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
=> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=>setenv autoload no; setenv autoboot no
 setenv autoload no; setenv autoboot no
=> dhcp
dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound to asetenv serverip 192.168.1.2
ddress 192.168.1.164
=> setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
=> if test -n ${netargs}; then run netargs; fitftp 0x10800000 192.168.1.2:tmp/wand-solo-sIb1cw/zImage
=> tftp 0x10800000 192.168.1.2:tmp/wand-solo-sIb1cw/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'tmp/wand-solo-sIb1cw/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################################
     1.5 MiB/s
done
Bytes transferred = 4505112 (44be18 hex)
=> tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x11100000
Loading: *############################################
     1.5 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x11000000 192.168.1.2:tmp/wand-solo-sIb1cw/imx6dl-wandboard.dtb
tftp 0x11000000 192.168.1.2:tmp/wand-solo-sIb1cw/imx6dl-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'tmp/wand-solo-sIb1cw/imx6dl-wandboard.dtb'.
Load address: 0x11000000
Loading: *##
     1.4 MiB/s
done
Bytes transferred = 24418 (5f62 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 11008f61
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 22.20 seconds.
# PYBOOT: Result: FAIL
am335x-bone: FAIL: last 80 lines of boot log:
    ---------------------------------------------
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi
U-Boot# if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi
U-Boot# if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no
U-Boot# setenv autoload no; setenv autoboot nodhcp
U-Boot# dhcp
cpsw Waiting for PHY auto negotiation to complete.. done
link up on port 0, speed 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client boundsetenv serverip 192.168.1.2
 to address 192.168.1.198
U-Boot# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
U-Boot# if test -n ${netargs}; then run netargs; fitftp 0x80200000 192.168.1.2:tmp/am335xbone-MhDQtQ/zImage
U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xbone-MhDQtQ/zImage
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.198
Filename 'tmp/am335xbone-MhDQtQ/zImage'.
Load address: 0x80200000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################################
     1.1 MiB/s
done
Bytes transferred = 4505112 (44be18 hex)
U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.198
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *############################################
     1.1 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xbone-MhDQtQ/am335x-bone.dtb
tftp 0x81f00000 192.168.1.2:tmp/am335xbone-MhDQtQ/am335x-bone.dtb
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.1.2; our IP address is 192.168.1.198
Filename 'tmp/am335xbone-MhDQtQ/am335x-bone.dtb'.
Load address: 0x81f00000
Loading: *##
     1 MiB/s
done
Bytes transferred = 28596 (6fb4 hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.198:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U-Boot# bootz 0x80200000 0x81000000 0x81f00000
bootz 0x80200000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 8f19a000, end 8f236dea ... OK
   Using Device Tree in place at 81f00000, end 81f09fb3
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 30.30 seconds.
# PYBOOT: Result: FAIL
omap3-overo-storm-tobi: FAIL: last 80 lines of boot log:
    --------------------------------------------------------
No EEPROM on expansion board
Die ID #3dea00029ff80000016830c40802e016
Net:   smc911x-0
Warning: smc911x-0 using MAC address from net device
Hit any key to stop autoboot:  
5  0 
Overo # 
Overo # version
version
U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05)
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
Overo # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
Overo # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
Overo #if test -n ${initenv}; then run initenv; fi
 if test -n ${initenv}; then run initenv; fi
Overo # if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
Overo # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Overo #dhcp
 dhcp
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 00:15:c9:28:f0:11
BOOTP broadcast 1
DHCP client bound to asetenv serverip 192.168.1.2
ddress 192.168.1.195
Overo # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
Overo # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3730storm-rFlhnK/zImage
Overo # tftp ${loadaddr} 192.168.1.2:tmp/3730storm-rFlhnK/zImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 00:15:c9:28:f0:11
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.195
Filename 'tmp/3730storm-rFlhnK/zImage'.
Load address: 0x82000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################################
     2.4 MiB/s
done
Bytes transferred = 4505112 (44be18 hex)
Overo # tftp 0x81f00000 192.168.1.2:tmp/3730storm-rFlhnK/omap3-overo-storm-tobi.dtb
tftp 0x81f00000 192.168.1.2:tmp/3730storm-rFlhnK/omap3-overo-storm-tobi.dtb
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 00:15:c9:28:f0:11
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.195
Filename 'tmp/3730storm-rFlhnK/omap3-overo-storm-tobi.dtb'.
Load address: 0x81f00000
Loading: *####
     2.3 MiB/s
done
Bytes transferred = 57128 (df28 hex)
Overo # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.195:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Overo # bootz ${loadaddr} - 0x81f00000
bootz ${loadaddr} - 0x81f00000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Device Tree to 8ffef000, end 8fffff27 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 26.03 seconds.
# PYBOOT: Result: FAIL
omap5-uevm: FAIL: last 80 lines of boot log:
    --------------------------------------------
Connected to omap5uevm console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(omap5uevm console)> hardreset
(user:khilman) Reboot omap5uevm
Reboot: omap5uevm ; phidget 1 2 :  off, sleep, on
found: 002/076 2
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.39 seconds.
# PYBOOT: Result: FAIL
imx6q-wandboard: FAIL: last 80 lines of boot log:
    -------------------------------------------------
U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29)
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
=> setenv bootargs console=ttymxc0,115200
setenv bootargs console=ttymxc0,115200
=> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
=> dhcp
dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound to adsetenv serverip 192.168.1.2
dress 192.168.1.163
=> setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
=> if test -n ${netargs}; then run netargs; fitftp 0x10800000 192.168.1.2:tmp/wand-quad-AyV1wQ/zImage
=> tftp 0x10800000 192.168.1.2:tmp/wand-quad-AyV1wQ/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.163
Filename 'tmp/wand-quad-AyV1wQ/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################################
     2.9 MiB/s
done
Bytes transferred = 4505112 (44be18 hex)
=> tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.163
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x11100000
Loading: *############################################
     2.8 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x11000000 192.168.1.2:tmp/wand-quad-AyV1wQ/imx6q-wandboard.dtb
tftp 0x11000000 192.168.1.2:tmp/wand-quad-AyV1wQ/imx6q-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.163
Filename 'tmp/wand-quad-AyV1wQ/imx6q-wandboard.dtb'.
Load address: 0x11000000
Loading: *##
     2.5 MiB/s
done
Bytes transferred = 25787 (64bb hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x44be18 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 110094ba
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.78 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 80 lines of boot log:
    ------------------------------------------------
Panda # if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
Panda #setenv autoload no; setenv autoboot no
 setenv autoload no; setenv autoboot no
Panda # dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to adsetenv serverip 192.168.1.2
dress 192.168.1.157
Panda # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
Panda # if test -n ${netargs}; then run netargs; fitftp 0x82000000 192.168.1.2:tmp/4460panda-es-WCoLqX/zImage
Panda # tftp 0x82000000 192.168.1.2:tmp/4460panda-es-WCoLqX/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.157
Filename 'tmp/4460panda-es-WCoLqX/zImage'.
Load address: 0x82000000
Loading: *EHCI timed out on TD - token=0x88008d80
T #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################################
     488.3 KiB/s
done
Bytes transferred = 4505112 (44be18 hex)
Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.157
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *EHCI timed out on TD - token=0x8008d80
T ############################################
     118.2 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
Panda # tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-WCoLqX/omap4-panda-es.dtb
tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-WCoLqX/omap4-panda-es.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.157
Filename 'tmp/4460panda-es-WCoLqX/omap4-panda-es.dtb'.
Load address: 0x81f00000
Loading: *EHCI timed out on TD - token=0x88008d80
T ####
     9.8 KiB/s
done
Bytes transferred = 50489 (c539 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 56.02 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
=> version
version
U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22)
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1
GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809
=> setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
=>setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
 setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=>setenv autoload no; setenv autoboot no
 setenv autoload no; setenv autoboot no
=>dhcp
 dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound to asetenv serverip 192.168.1.2
ddress 192.168.1.156
=> setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
=> if test -n ${netargs}; then run netargs; fitftp 0x10800000 192.168.1.2:tmp/wand-dual-0zJAa6/zImage
=> tftp 0x10800000 192.168.1.2:tmp/wand-dual-0zJAa6/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/wand-dual-0zJAa6/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################################
     1.5 MiB/s
done
Bytes transferred = 4505112 (44be18 hex)
=> tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x11100000
Loading: *############################################
     1.6 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x11000000 192.168.1.2:tmp/wand-dual-0zJAa6/imx6dl-wandboard.dtb
tftp 0x11000000 192.168.1.2:tmp/wand-dual-0zJAa6/imx6dl-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/wand-dual-0zJAa6/imx6dl-wandboard.dtb'.
Load address: 0x11000000
Loading: *##
     1.5 MiB/s
done
Bytes transferred = 24418 (5f62 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 11008f61
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 22.05 seconds.
# PYBOOT: Result: FAIL
u8500_defconfig
---------------
ste-snowball: FAIL: last 80 lines of boot log:
    ----------------------------------------------
U-Boot 2009.11 (sept. 19 2011 - 17:03:11)
CPU:	ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz
I2C:   ready
DRAM:   1 GB
MMC: 	
MCDE:  startup failed
sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2
EMMC: 0, MMC: 1
In:    serial
Out:   serial
Err:   serial
Net:   smc911x-0
Hit any key to stop autoboot:  1 
 0 
U8500 $ 
U8500 $ version
version
U-Boot 2009.11 (sept. 19 2011 - 17:03:11)
U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e
setenv ethaddr 6e:e6:84:36:8e:9e
Can't overwrite "ethaddr"
U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4
setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4
U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
U8500 $ if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
U8500 $ if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
U8500 $ setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
U8500 $ dhcp
dhcp
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 6e:e6:84:36:8e:9e
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to addsetenv serverip 192.168.1.2
ress 192.168.1.159
U8500 $ setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi
U8500 $ if test -n ${netargs}; then run netargs; fitftp 0x00800000 192.168.1.2:tmp/snowball-HFdTnL/tmpqEazsF-uImage
U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-HFdTnL/tmpqEazsF-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 6e:e6:84:36:8e:9e
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.159
Filename 'tmp/snowball-HFdTnL/tmpqEazsF-uImage'.
Load address: 0x800000
Loading: *#################################################################
     #################################################################
     #################################################################
     ######
done
Bytes transferred = 2947457 (2cf981 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000  
bootm 0x00800000  
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2947393 Bytes =  2.8 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 31.38 seconds.
# PYBOOT: Result: FAIL

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

next boot: 2 pass, 37 fail (next-20140220)