On 09/11/2015 07:01 AM, Viresh Kumar wrote:
If 'opp-microvolt' is used to specify values for multiple regulators, then we need this additional information to know if the values passed should be treated as <target> or <target min max>.
Can't you determine this implicitly from # of cells / # of regulators being either 1 or 3?
This is because, DT doesn't differentiate between these two styles:
prop = <x>, <y>, <z>; prop = <x y z>;
Cc: devicetree@vger.kernel.org Signed-off-by: Viresh Kumar viresh.kumar@linaro.org
Documentation/devicetree/bindings/opp/opp.txt | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index 8759bc4783ed..719603b87353 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -76,6 +76,16 @@ This describes the OPPs belonging to a device. This node can have following present here is important, as that should match the order in which values are present in 'opp-microvolt' and 'opp-microamp' properties. +- opp-microvolt-triplets: This is a required property, only if multiple supplies
- are available for the device. Otherwise it is ignored.
- 'opp-microvolt' can be present in two forms: <target> or <target min max>, per
- power-supply. 'opp-microvolt-triplets' property is used to find the form in
- which 'opp-microvolt' is present.
- If present, then 'opp-microvolt' must be present in <target min max> form,
- else in <target> form.
This implies that bindings currently with triplets are wrong since they will be missing opp-microvolt-triplets.
Rob