This patchset removes some single-platform compatibility tricks related to DEBUG_LL and, as a result, allows multi_v7_defconfig derived builds to enable DEBUG_LL. Currently the user selected kbuild setting is ignored and the PL01X's DEBUG_LL stub is silently selected instead. This is a pain if your hardware doesn't have this cell, not least because it takes a little time to figure out that kbuild built the wrong code.
Warning:
silentoldconfig on PL011 single platforms will result in DEBUG_LL being directed at ICEDCC rather than PL011. This should only affect silentoldconfig since oldconfig prompts and the defconfigs have been updated to avoid this problem.
Changes since v11: - Fixed sort order of Kconfig symbols (review of Russell King) - Reviewed all defconfigs for the selection of DEBUG_UART_NONE. All identified have 8250-based UARTs and are switched to DEBUG_LL_UART_8250 (review of Arnd Bergmann). - Fixed regression in the netx macros (bad setting of \rp and \rv. - Rebased on latest mainline (v3.18-rc1). Note that two patches from v11 were merged upstream and are no longer included here. - Added a trivial fix to the defaults list for DEBUG_UART_PHYS which came to my attention as a merge conflict.
Changes since v10: - Fixed typos in the omap1 config help texts (review of Aaro Koskinen).
Changes since v9: - Removed a spuriously introduced (and unused) config variable from the netx patch (review of Paul Bolle). - Fix netx macro to ensure \rv is correctly initialized. - Rebased on v3.17rc4.
Changes since v8: - Regenerated patch series with --find-renames to properly track code movement.
Changes since v7: - Killed DEBUG_LL_UART_NONE completely and migrated over the four remaining platforms that relied on this (Arnd Bergmann, Russell King). This fixes some problems with oldconfig builds. - Rebased on latest mainline (v3.17rc1).
Changes since v6: - Removed a patch to limit DEBUG_LL_UART_NONE to platforms that support it because it almost time to drop DEBUG_LL_UART_NONE anyway (only four platforms still use it). - Rebased on latest mainline (v3.16rc3).
Changes since v5:
- Shortened the list of platforms that can select DEBUG_LL_UART_NONE (changes Arnd Bergmann) - Rebased on latest mainline (v3.15rc7).
Changes since v4:
- Rebased to latest mainline (and tested again). No functional changes.
Changes since v3:
- Converted from a single patch to a series. - Tested defconfig builds of all impacted platforms.
Changes since v2:
- Switch from def_bool to bool (thanks Russell King)
Changes since v1:
- Remove pointless single platform support (thanks Arnd Bergmann)
Daniel Thompson (15): arm: cnx3xxxx: Remove spurious default for DEBUG_CNS3XXX arm: iop32x: Enable DEBUG_LL_UART_8250 arm: iop33x: Enable DEBUG_LL_UART_8250 arm: ixp4xx: Enable DEBUG_LL_UART_8250 arm: lpc32xx: Enable DEBUG_LL_UART_8250 arm: mv78xx0: Enable DEBUG_LL_UART_8250 arm: orion5x: Enable DEBUG_LL_UART_8250 arm: rpc: Enable DEBUG_LL_UART_8250 arm: Remove DEBUG_LL_UART_NONE arm: ks8695: Migrate debug_ll macros to shared directory arm: omap1: Migrate debug_ll macros to use 8250.S arm: netx: Migrate DEBUG_LL macros to shared directory arm: sa1100: Migrate DEBUG_LL macros to shared directory arm: Seperate DEBUG_UART_PHYS from DEBUG_LL on EP93XX arm: Fix DEBUG_LL for multi-platform kernels (without PL01X)
arch/arm/Kconfig.debug | 141 +++++++++++++++++---- arch/arm/configs/iop32x_defconfig | 1 + arch/arm/configs/iop33x_defconfig | 1 + arch/arm/configs/ixp4xx_defconfig | 1 + arch/arm/configs/lpc32xx_defconfig | 1 + arch/arm/configs/mv78xx0_defconfig | 1 + arch/arm/configs/orion5x_defconfig | 1 + arch/arm/configs/rpc_defconfig | 1 + .../mach/debug-macro.S => include/debug/ks8695.S} | 10 +- .../mach/debug-macro.S => include/debug/netx.S} | 22 ++-- arch/arm/include/debug/sa1100.S | 37 ++++++ arch/arm/mach-omap1/include/mach/debug-macro.S | 101 --------------- arch/arm/mach-sa1100/include/mach/debug-macro.S | 62 --------- 13 files changed, 181 insertions(+), 199 deletions(-) rename arch/arm/{mach-ks8695/include/mach/debug-macro.S => include/debug/ks8695.S} (80%) rename arch/arm/{mach-netx/include/mach/debug-macro.S => include/debug/netx.S} (62%) create mode 100644 arch/arm/include/debug/sa1100.S delete mode 100644 arch/arm/mach-omap1/include/mach/debug-macro.S delete mode 100644 arch/arm/mach-sa1100/include/mach/debug-macro.S
-- 1.9.3