As part of the migration we copy a few definitions from the mach-sa1100 headers and replace the automatic serial port detectiion with explicit configuration based on DEBUG_UART_PHYS/DEBUG_UART_VIRT.
The removal of the automatic configuration is similar to the way migration was handled for OMAP2 (see 808b7e07464d...).
Signed-off-by: Daniel Thompson daniel.thompson@linaro.org Cc: Russell King linux@arm.linux.org.uk --- arch/arm/Kconfig.debug | 41 ++++++++++++++-- arch/arm/include/debug/sa1100.S | 37 +++++++++++++++ arch/arm/mach-sa1100/include/mach/debug-macro.S | 62 ------------------------- 3 files changed, 75 insertions(+), 65 deletions(-) create mode 100644 arch/arm/include/debug/sa1100.S delete mode 100644 arch/arm/mach-sa1100/include/mach/debug-macro.S
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index ab5f60b..01bf5c7 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -761,6 +761,30 @@ choice their output to UART 2. The port must have been initialised by the boot-loader before use.
+ config DEBUG_SA1100_UART1 + depends on ARCH_SA1100 + select DEBUG_SA1100_UART + bool "Kernel low-level debugging messages via SA1100 Ser1" + help + Say Y here if you want kernel low-level debugging support + on SA1100 based platforms. + + config DEBUG_SA1100_UART2 + depends on ARCH_SA1100 + select DEBUG_SA1100_UART + bool "Kernel low-level debugging messages via SA1100 Ser2" + help + Say Y here if you want kernel low-level debugging support + on SA1100 based platforms. + + config DEBUG_SA1100_UART3 + depends on ARCH_SA1100 + select DEBUG_SA1100_UART + bool "Kernel low-level debugging messages via SA1100 Ser3" + help + Say Y here if you want kernel low-level debugging support + on SA1100 based platforms. + config DEBUG_SOCFPGA_UART depends on ARCH_SOCFPGA bool "Use SOCFPGA UART for low-level debug" @@ -1056,6 +1080,10 @@ config DEBUG_TEGRA_UART bool depends on ARCH_TEGRA
+config DEBUG_SA1100_UART + bool + depends on ARCH_SA1100 + config DEBUG_STI_UART bool depends on ARCH_STI @@ -1085,6 +1113,7 @@ config DEBUG_LL_INCLUDE default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART default "debug/s5pv210.S" if DEBUG_S5PV210_UART + default "debug/sa1100.S" if DEBUG_SA1100_UART default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 default "debug/sti.S" if DEBUG_STI_UART default "debug/tegra.S" if DEBUG_TEGRA_UART @@ -1104,7 +1133,7 @@ config DEBUG_UART_PL01X ARCH_SPEAR13XX || \ ARCH_VERSATILE
-# Compatibility options for 8250 +#Compatibility options for 8250 config DEBUG_UART_8250 def_bool ARCH_DOVE || ARCH_EBSA110 || \ (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \ @@ -1150,6 +1179,9 @@ config DEBUG_UART_PHYS default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ DEBUG_S3C2410_UART2) default 0x7c0003f8 if FOOTBRIDGE + default 0x80010000 if DEBUG_SA1100_UART1 + default 0x80030000 if DEBUG_SA1100_UART2 + default 0x80050000 if DEBUG_SA1100_UART3 default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART default 0x80230000 if DEBUG_PICOXCELL_UART @@ -1186,7 +1218,7 @@ config DEBUG_UART_PHYS DEBUG_LL_UART_EFM32 || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || \ DEBUG_MSM_UART || DEBUG_NETX_UART || DEBUG_QCOM_UARTDM || \ - DEBUG_S3C24XX_UART + DEBUG_S3C24XX_UART || DEBUG_SA1100_UART
config DEBUG_UART_VIRT hex "Virtual base address of debug UART" @@ -1214,6 +1246,9 @@ config DEBUG_UART_VIRT DEBUG_S3C2410_UART2) default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9 + default 0xf8010000 if DEBUG_SA1100_UART1 + default 0xf8030000 if DEBUG_SA1100_UART2 + default 0xf8050000 if DEBUG_SA1100_UART3 default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 default 0xfa71e000 if DEBUG_QCOM_UARTDM default 0xfb009000 if DEBUG_REALVIEW_STD_PORT @@ -1259,7 +1294,7 @@ config DEBUG_UART_VIRT depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || \ DEBUG_MSM_UART || DEBUG_NETX_UART || DEBUG_QCOM_UARTDM || \ - DEBUG_S3C24XX_UART + DEBUG_S3C24XX_UART || DEBUG_SA1100_UART
config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" diff --git a/arch/arm/include/debug/sa1100.S b/arch/arm/include/debug/sa1100.S new file mode 100644 index 0000000..6b5e1ce --- /dev/null +++ b/arch/arm/include/debug/sa1100.S @@ -0,0 +1,37 @@ +/* + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#define UTDR 0x14 +#define UTSR1 0x20 +#define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */ +#define UTSR1_TNF 0x00000004 /* Transmit FIFO Not Full (read) */ + + .macro addruart, rp, rv, tmp + ldr \rp, =CONFIG_DEBUG_UART_PHYS + ldr \rv, =CONFIG_DEBUG_UART_VIRT + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #UTDR] + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #UTSR1] + tst \rd, #UTSR1_TNF + beq 1001b + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #UTSR1] + tst \rd, #UTSR1_TBY + bne 1001b + .endm diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S deleted file mode 100644 index 530772d..0000000 --- a/arch/arm/mach-sa1100/include/mach/debug-macro.S +++ /dev/null @@ -1,62 +0,0 @@ -/* arch/arm/mach-sa1100/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ -#include <mach/hardware.h> - - .macro addruart, rp, rv, tmp - mrc p15, 0, \rp, c1, c0 - tst \rp, #1 @ MMU enabled? - moveq \rp, #0x80000000 @ physical base address - movne \rp, #0xf8000000 @ virtual address - - @ We probe for the active serial port here, coherently with - @ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h. - @ We assume r1 can be clobbered. - - @ see if Ser3 is active - add \rp, \rp, #0x00050000 - ldr \rv, [\rp, #UTCR3] - tst \rv, #UTCR3_TXE - - @ if Ser3 is inactive, then try Ser1 - addeq \rp, \rp, #(0x00010000 - 0x00050000) - ldreq \rv, [\rp, #UTCR3] - tsteq \rv, #UTCR3_TXE - - @ if Ser1 is inactive, then try Ser2 - addeq \rp, \rp, #(0x00030000 - 0x00010000) - ldreq \rv, [\rp, #UTCR3] - tsteq \rv, #UTCR3_TXE - - @ clear top bits, and generate both phys and virt addresses - lsl \rp, \rp, #8 - lsr \rp, \rp, #8 - orr \rv, \rp, #0xf8000000 @ virtual - orr \rp, \rp, #0x80000000 @ physical - - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #UTDR] - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #UTSR1] - tst \rd, #UTSR1_TNF - beq 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #UTSR1] - tst \rd, #UTSR1_TBY - bne 1001b - .endm