These aren't used until now by any DT files and wouldn't be used now as we have a better scheme in place now, i.e. opp-property-<name> properties.
Remove the (useless) binding without breaking ABI.
Reviewed-by: Stephen Boyd sboyd@codeaurora.org Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- Documentation/devicetree/bindings/opp/opp.txt | 62 +-------------------------- 1 file changed, 2 insertions(+), 60 deletions(-)
diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index 61c6f25cf8e2..30c4bb3718bc 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -45,21 +45,10 @@ Devices supporting OPPs must set their "operating-points-v2" property with phandle to a OPP table in their DT node. The OPP core will use this phandle to find the operating points for the device.
-Devices may want to choose OPP tables at runtime and so can provide a list of -phandles here. But only *one* of them should be chosen at runtime. This must be -accompanied by a corresponding "operating-points-names" property, to uniquely -identify the OPP tables. - If required, this can be extended for SoC vendor specfic bindings. Such bindings should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt and should have a compatible description like: "operating-points-v2-<vendor>".
-Optional properties: -- operating-points-names: Names of OPP tables (required if multiple OPP - tables are present), to uniquely identify them. The same list must be present - for all the CPUs which are sharing clock/voltage rails and hence the OPP - tables. - * OPP Table Node
This describes the OPPs belonging to a device. This node can have following @@ -454,54 +443,7 @@ Example 4: Handling multiple regulators }; };
-Example 5: Multiple OPP tables - -/ { - cpus { - cpu@0 { - compatible = "arm,cortex-a7"; - ... - - cpu-supply = <&cpu_supply> - operating-points-v2 = <&cpu0_opp_table_slow>, <&cpu0_opp_table_fast>; - operating-points-names = "slow", "fast"; - }; - }; - - cpu0_opp_table_slow: opp_table_slow { - compatible = "operating-points-v2"; - status = "okay"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <600000000>; - ... - }; - - opp01 { - opp-hz = /bits/ 64 <800000000>; - ... - }; - }; - - cpu0_opp_table_fast: opp_table_fast { - compatible = "operating-points-v2"; - status = "okay"; - opp-shared; - - opp10 { - opp-hz = /bits/ 64 <1000000000>; - ... - }; - - opp11 { - opp-hz = /bits/ 64 <1100000000>; - ... - }; - }; -}; - -Example 6: opp-supported-hw +Example 5: opp-supported-hw (example: three level hierarchy of versions: cuts, substrate and process)
/ { @@ -546,7 +488,7 @@ Example 6: opp-supported-hw }; };
-Example 7: opp-microvolt-<name>, opp-microamp-<name>, turbo-mode-<name>, +Example 6: opp-microvolt-<name>, opp-microamp-<name>, turbo-mode-<name>, opp-suspend-<name>: (example: device with two possible microvolt ranges: slow and fast)