Automated DT boot report for various ARM defconfigs.
Tree/Branch: mainline Git describe: v3.13-8988-gd891ea2 Failed boot tests (console logs at the end) =========================================== omap4-panda: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: omap2plus_defconfig sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig exynos5250-arndale: FAIL: exynos_defconfig ste-snowball: FAIL: multi_v7_defconfig tegra30-beaver: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig bcm28155-ap: FAIL: multi_v7_defconfig imx6q-wandboard: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig armada-370-mirabox: FAIL: mvebu_defconfig
Full Report ===========
omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.7 sec omap3-beagle-xm PASS: 1 min 1.0 sec am335x-bone PASS: 0 min 27.7 sec omap4-panda FAIL: 0 min 57.4 sec omap4-panda-es FAIL: 1 min 4.7 sec omap3-tobi,3730storm PASS: 0 min 25.0 sec omap3-tobi,3530overo PASS: 0 min 22.9 sec
multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 FAIL: 0 min 19.7 sec
imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.8 sec imx6q-wandboard FAIL: 0 min 21.0 sec
sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 17.8 sec sun4i-a10-cubieboard FAIL: 0 min 19.0 sec
bcm_defconfig ------------- bcm28155-ap PASS: 1 min 4.2 sec
exynos_defconfig ---------------- exynos5250-arndale FAIL: 0 min 31.4 sec
multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 32.4 sec tegra30-beaver FAIL: 0 min 23.9 sec am335x-boneblack PASS: 0 min 22.6 sec omap3-beagle-xm PASS: 0 min 54.3 sec sun7i-a20-cubieboard2 FAIL: 0 min 19.4 sec armada-370-mirabox FAIL: 0 min 31.6 sec omap4-panda FAIL: 0 min 54.2 sec omap4-panda-es FAIL: 1 min 0.2 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 31.6 sec sun4i-a10-cubieboard FAIL: 0 min 19.1 sec bcm28155-ap FAIL: 16 min 14.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.4 sec am335x-bone PASS: 0 min 25.3 sec imx6q-wandboard FAIL: 0 min 20.7 sec omap3-tobi,3730storm PASS: 0 min 23.3 sec imx6dl-wandboard,wand-dual FAIL: 0 min 22.1 sec omap3-tobi,3530overo PASS: 0 min 20.8 sec
u8500_defconfig --------------- ste-snowball FAIL: 0 min 31.3 sec
sama5_defconfig --------------- sama5d35ek PASS: 0 min 24.2 sec
mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 31.5 sec armada-370-mirabox FAIL: 0 min 31.6 sec
Console logs for failures =========================
omap2plus_defconfig -------------------
omap4-panda: FAIL: last 24 lines of boot log: ---------------------------------------------
3.9 KiB/s done Bytes transferred = 20616 (5088 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f08087
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 57.36 seconds. # PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------
2 KiB/s done Bytes transferred = 20856 (5178 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f08177
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 64.73 seconds. # PYBOOT: Result: FAIL
multi_lpae_defconfig --------------------
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: -------------------------------------------------------
sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i#bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x3867a8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.66 seconds. # PYBOOT: Result: FAIL
imx_v6_v7_defconfig -------------------
imx6q-wandboard: FAIL: last 24 lines of boot log: -------------------------------------------------
Bytes transferred = 34380 (864c hex) =>printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4c48b8 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.00 seconds. # PYBOOT: Result: FAIL
sunxi_defconfig ---------------
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: -------------------------------------------------------
sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i#bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 17.75 seconds. # PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------
sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.00 seconds. # PYBOOT: Result: FAIL
exynos_defconfig ----------------
exynos5250-arndale: FAIL: last 24 lines of boot log: ----------------------------------------------------
Connected to arndale console [channel connected] (~$quit to exit) (user:khilman) is already connected
~$hardreset
Command(arndale console)> hardreset (user:khilman) Reboot arndale Reboot: arndale ; phidget 2 0 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL
multi_v7_defconfig ------------------
ste-snowball: FAIL: last 24 lines of boot log: ----------------------------------------------
################################################################# ########################################################## done Bytes transferred = 3711969 (38a3e1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3711905 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 32.40 seconds. # PYBOOT: Result: FAIL
tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------
Bytes transferred = 23808 (5d00 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000 bootz 0x81000000 0x82000000 0x83000000 Kernel image @ 0x81000000 [ 0x000000 - 0x3818e8 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83008cff
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 23.93 seconds. # PYBOOT: Result: FAIL
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: -------------------------------------------------------
sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i#bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x3818e8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.42 seconds. # PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log: ----------------------------------------------------
Connected to mirabox console [channel connected] (~$quit to exit) (user:khilman) is already connected
~$hardreset
Command(mirabox console)> hardreset (user:khilman) Reboot mirabox Reboot: mirabox ; ip9258 1 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.64 seconds. # PYBOOT: Result: FAIL
omap4-panda: FAIL: last 24 lines of boot log: ---------------------------------------------
2.9 KiB/s done Bytes transferred = 20616 (5088 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f08087
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 54.17 seconds. # PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------
2 KiB/s done Bytes transferred = 20856 (5178 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda #bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f08177
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 60.18 seconds. # PYBOOT: Result: FAIL
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------
Connected to obsax3 console [channel connected] (~$quit to exit) (user:khilman) is already connected
~$hardreset
Command(obsax3 console)> hardreset (user:khilman) Reboot obsax3 Reboot: obsax3 ; ip9258 1 4 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.61 seconds. # PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------
sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x3818e8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.11 seconds. # PYBOOT: Result: FAIL
bcm28155-ap: FAIL: last 24 lines of boot log: ---------------------------------------------
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__ _call(self.context, command, ignore_failure, timeout) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call context.run_command(cmd, failok=ignore_failure) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command rc = subprocess.check_call(command, **output_args) File "/usr/lib/python2.7/subprocess.py", line 511, in check_call raise CalledProcessError(retcode, cmd) CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124 <LAVA_DISPATCHER>2014-01-28 08:28:59 PM INFO: CriticalError <LAVA_DISPATCHER>2014-01-28 08:28:59 PM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.). ErrorMessage: Failed to boot test image. Lava failed at action boot_linaro_image with error:Failed to boot test image. Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run action.run(**params) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run raise CriticalError("Failed to boot test image.") CriticalError: Failed to boot test image. Reboot: capri ; ip9258 1 3 : ['off'] <LAVA_DISPATCHER>2014-01-28 08:28:59 PM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/%27%7D <LAVA_DISPATCHER>2014-01-28 08:28:59 PM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/d34102da65e9e73bcdcc74ca13e94f42c... LBOOT: Result: FAIL LBOOT: Time: 974.08 seconds.
imx6q-wandboard: FAIL: last 24 lines of boot log: -------------------------------------------------
Bytes transferred = 34380 (864c hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x3818e8 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.66 seconds. # PYBOOT: Result: FAIL
imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log: ------------------------------------------------------------
1.4 MiB/s done Bytes transferred = 32741 (7fe5 hex) =>printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.165:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100afe4
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.09 seconds. # PYBOOT: Result: FAIL
u8500_defconfig ---------------
ste-snowball: FAIL: last 24 lines of boot log: ----------------------------------------------
################################################################# ##### done Bytes transferred = 2934657 (2cc781 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2934593 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 31.27 seconds. # PYBOOT: Result: FAIL
mvebu_defconfig ---------------
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------
Connected to obsax3 console [channel connected] (~$quit to exit) (user:khilman) is already connected
~$hardreset
Command(obsax3 console)> hardreset (user:khilman) Reboot obsax3 Reboot: obsax3 ; ip9258 1 4 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.54 seconds. # PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log: ----------------------------------------------------
Connected to mirabox console [channel connected] (~$quit to exit) (user:khilman) is already connected
~$hardreset
Command(mirabox console)> hardreset (user:khilman) Reboot mirabox Reboot: mirabox ; ip9258 1 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.57 seconds. # PYBOOT: Result: FAIL