On Mon, 12 Dec 2016, Rob Herring wrote:
On Fri, Dec 09, 2016 at 03:15:14PM +0100, Benjamin Gaignard wrote:
Define bindings for pwm-stm32
version 6:
- change st,breakinput parameter format to make it usuable on stm32f7 too.
version 2:
- use parameters instead of compatible of handle the hardware configuration
Signed-off-by: Benjamin Gaignard benjamin.gaignard@st.com
.../devicetree/bindings/pwm/pwm-stm32.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/pwm-stm32.txt
diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt new file mode 100644 index 0000000..866f222 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt @@ -0,0 +1,33 @@ +STMicroelectronics STM32 Timers PWM bindings
+Must be a sub-node of an STM32 Timers device tree node. +See ../mfd/stm32-timers.txt for details about the parent node.
+Required parameters: +- compatible: Must be "st,stm32-pwm". +- pinctrl-names: Set to "default". +- pinctrl-0: List of phandles pointing to pin configuration nodes for PWM module.
For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt+Optional parameters: +- st,breakinput: Arrays of three u32 <index level filter> to describe break input configurations.
"index" indicates on which break input the configuration should be applied."level" gives the active level (0=low or 1=high) for this configuration."filter" gives the filtering value to be applied.+Example:
- timers@40010000 {
timer@...
No, it should be timers.
The 's' is intentional, since this parent (MFD) device houses 3 different types of timers. The "timer" node is a child of this one.
With that,
Acked-by: Rob Herring robh@kernel.org
#address-cells = <1>;#size-cells = <0>;compatible = "st,stm32-timers";reg = <0x40010000 0x400>;clocks = <&rcc 0 160>;clock-names = "clk_int";pwm {compatible = "st,stm32-pwm";pinctrl-0 = <&pwm1_pins>;pinctrl-names = "default";st,breakinput = <0 1 5>;};- };