Hi Viresh,
On 06/07/15 20:54, Viresh Kumar wrote:
Migrate ks8695 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now.
This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED.
There is nothing to be done for oneshot or shutdown states and so are not implemented.
Cc: Greg Ungerer gerg@uclinux.org Signed-off-by: Viresh Kumar viresh.kumar@linaro.org
Acked-by: Greg Ungerer gerg@uclinux.org
Regards Greg
arch/arm/mach-ks8695/time.c | 43 +++++++++++++++++++++---------------------- 1 file changed, 21 insertions(+), 22 deletions(-)
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c index a197874bf382..18eb0fbd8d82 100644 --- a/arch/arm/mach-ks8695/time.c +++ b/arch/arm/mach-ks8695/time.c @@ -54,28 +54,25 @@ /* Timer0 Timeout Counter Register */ #define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */ -static void ks8695_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
+static int ks8695_set_periodic(struct clock_event_device *evt) {
- u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ);
- u32 half = DIV_ROUND_CLOSEST(rate, 2); u32 tmcon;
- if (mode == CLOCK_EVT_FEAT_PERIODIC) {
u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ);
u32 half = DIV_ROUND_CLOSEST(rate, 2);
/* Disable timer 1 */
tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
tmcon &= ~TMCON_T1EN;
writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
- /* Disable timer 1 */
- tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
- tmcon &= ~TMCON_T1EN;
- writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
/* Both registers need to count down */
writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC);
writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD);
- /* Both registers need to count down */
- writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC);
- writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD);
/* Re-enable timer1 */
tmcon |= TMCON_T1EN;
writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
- }
- /* Re-enable timer1 */
- tmcon |= TMCON_T1EN;
- writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
- return 0; }
static int ks8695_set_next_event(unsigned long cycles, @@ -102,11 +99,13 @@ static int ks8695_set_next_event(unsigned long cycles, } static struct clock_event_device clockevent_ks8695 = {
- .name = "ks8695_t1tc",
- .rating = 300, /* Reasonably fast and accurate clock event */
- .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
- .set_next_event = ks8695_set_next_event,
- .set_mode = ks8695_set_mode,
- .name = "ks8695_t1tc",
- /* Reasonably fast and accurate clock event */
- .rating = 300,
- .features = CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_PERIODIC,
- .set_next_event = ks8695_set_next_event,
- .set_state_periodic = ks8695_set_periodic, };
/*