The code was overly complicated here because of the limitations that we had with RCUs (Couldn't use opp-table and OPPs outside RCU protected section and can't call sleep-able routines from within that). But that is long gone now.
Reorganize _generic_set_opp_regulator() in order to avoid using "struct dev_pm_set_opp_data" and copying data into it for the case where opp_table->set_opp is not set.
Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Reviewed-by: Stephen Boyd sboyd@codeaurora.org --- drivers/base/power/opp/core.c | 73 ++++++++++++++++++++----------------------- 1 file changed, 34 insertions(+), 39 deletions(-)
diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c index dae61720b314..c4590fc017ba 100644 --- a/drivers/base/power/opp/core.c +++ b/drivers/base/power/opp/core.c @@ -543,17 +543,18 @@ _generic_set_opp_clk_only(struct device *dev, struct clk *clk, return ret; }
-static int _generic_set_opp(struct dev_pm_set_opp_data *data) +static int _generic_set_opp_regulator(const struct opp_table *opp_table, + struct device *dev, + unsigned long old_freq, + unsigned long freq, + struct dev_pm_opp_supply *old_supply, + struct dev_pm_opp_supply *new_supply) { - struct dev_pm_opp_supply *old_supply = data->old_opp.supplies; - struct dev_pm_opp_supply *new_supply = data->new_opp.supplies; - unsigned long old_freq = data->old_opp.rate, freq = data->new_opp.rate; - struct regulator *reg = data->regulators[0]; - struct device *dev= data->dev; + struct regulator *reg = opp_table->regulators[0]; int ret;
/* This function only supports single regulator per device */ - if (WARN_ON(data->regulator_count > 1)) { + if (WARN_ON(opp_table->regulator_count > 1)) { dev_err(dev, "multiple regulators are not supported\n"); return -EINVAL; } @@ -566,7 +567,7 @@ static int _generic_set_opp(struct dev_pm_set_opp_data *data) }
/* Change frequency */ - ret = _generic_set_opp_clk_only(dev, data->clk, old_freq, freq); + ret = _generic_set_opp_clk_only(dev, opp_table->clk, old_freq, freq); if (ret) goto restore_voltage;
@@ -580,12 +581,12 @@ static int _generic_set_opp(struct dev_pm_set_opp_data *data) return 0;
restore_freq: - if (_generic_set_opp_clk_only(dev, data->clk, freq, old_freq)) + if (_generic_set_opp_clk_only(dev, opp_table->clk, freq, old_freq)) dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n", __func__, old_freq); restore_voltage: /* This shouldn't harm even if the voltages weren't updated earlier */ - if (old_supply->u_volt) + if (old_supply) _set_opp_voltage(dev, reg, old_supply);
return ret; @@ -603,10 +604,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) { struct opp_table *opp_table; unsigned long freq, old_freq; - int (*set_opp)(struct dev_pm_set_opp_data *data); struct dev_pm_opp *old_opp, *opp; - struct regulator **regulators; - struct dev_pm_set_opp_data *data; struct clk *clk; int ret, size;
@@ -661,38 +659,35 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n", __func__, old_freq, freq);
- regulators = opp_table->regulators; - /* Only frequency scaling */ - if (!regulators) { + if (!opp_table->regulators) { ret = _generic_set_opp_clk_only(dev, clk, old_freq, freq); - goto put_opps; - } + } else if (!opp_table->set_opp) { + ret = _generic_set_opp_regulator(opp_table, dev, old_freq, freq, + IS_ERR(old_opp) ? NULL : old_opp->supplies, + opp->supplies); + } else { + struct dev_pm_set_opp_data *data;
- if (opp_table->set_opp) - set_opp = opp_table->set_opp; - else - set_opp = _generic_set_opp; - - data = opp_table->set_opp_data; - data->regulators = regulators; - data->regulator_count = opp_table->regulator_count; - data->clk = clk; - data->dev = dev; - - data->old_opp.rate = old_freq; - size = sizeof(*opp->supplies) * opp_table->regulator_count; - if (IS_ERR(old_opp)) - memset(data->old_opp.supplies, 0, size); - else - memcpy(data->old_opp.supplies, old_opp->supplies, size); + data = opp_table->set_opp_data; + data->regulators = opp_table->regulators; + data->regulator_count = opp_table->regulator_count; + data->clk = clk; + data->dev = dev;
- data->new_opp.rate = freq; - memcpy(data->new_opp.supplies, opp->supplies, size); + data->old_opp.rate = old_freq; + size = sizeof(*opp->supplies) * opp_table->regulator_count; + if (IS_ERR(old_opp)) + memset(data->old_opp.supplies, 0, size); + else + memcpy(data->old_opp.supplies, old_opp->supplies, size);
- ret = set_opp(data); + data->new_opp.rate = freq; + memcpy(data->new_opp.supplies, opp->supplies, size); + + ret = opp_table->set_opp(data); + }
-put_opps: dev_pm_opp_put(opp); put_old_opp: if (!IS_ERR(old_opp))