Tree/Branch: stable Git describe: v3.12.19 Failed boot tests (console logs at the end) =========================================== omap5-uevm: FAIL: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y sun7i-a20-cubieboard2: OFFLINE: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y am335x-boneblack: FAIL: arm-omap2plus_defconfig am335x-boneblack: FAIL: arm-multi_v7_defconfig
Full Report ===========
arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 16.3 sec: PASS
arm-tegra_defconfig ------------------- tegra30-beaver 0 min 23.6 sec: PASS
arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.0 sec: PASS omap5-uevm 1 min 18.3 sec: FAIL sun7i-a20-cubieboard2 0 min 31.4 sec: OFFLINE
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 17.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 17.5 sec: PASS imx6q-wandboard 0 min 16.2 sec: PASS
arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 48.8 sec: PASS am335x-boneblack 1 min 48.8 sec: FAIL omap3-beagle-xm 0 min 55.8 sec: PASS legacy,3530beagle 0 min 41.6 sec: PASS omap4-panda 1 min 12.9 sec: PASS omap3-tobi 0 min 21.5 sec: PASS am335x-bone 0 min 26.5 sec: PASS legacy,n900 0 min 15.7 sec: PASS omap4-panda-es 1 min 9.5 sec: PASS legacy,3730storm 0 min 23.7 sec: PASS legacy,3530overo 0 min 21.1 sec: PASS
arm-multi_v7_defconfig ---------------------- ste-snowball 0 min 26.0 sec: PASS tegra30-beaver 0 min 20.7 sec: PASS am335x-boneblack 0 min 42.2 sec: FAIL omap3-beagle-xm 0 min 57.8 sec: PASS sun7i-a20-cubieboard2 0 min 13.5 sec: PASS armada-370-mirabox 0 min 20.5 sec: PASS omap4-panda 1 min 5.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 22.6 sec: PASS sun4i-a10-cubieboard 0 min 18.6 sec: PASS bcm28155-ap 0 min 25.0 sec: PASS imx6dl-wandboard,wand-solo 0 min 17.1 sec: PASS omap3-tobi 0 min 20.1 sec: PASS am335x-bone 0 min 33.7 sec: PASS imx6q-wandboard 0 min 16.1 sec: PASS omap4-panda-es 1 min 5.8 sec: PASS imx6dl-wandboard,wand-dual 0 min 17.4 sec: PASS
arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.3 sec: PASS
arm-exynos_defconfig -------------------- exynos5250-arndale 0 min 29.6 sec: PASS
arm-u8500_defconfig ------------------- ste-snowball 0 min 36.4 sec: PASS
arm-da8xx_omapl_defconfig ------------------------- da850-evm 0 min 14.6 sec: PASS legacy,da850evm 0 min 13.8 sec: PASS
arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.3 sec: PASS
Console logs for failures =========================
arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ----------------------------------------
omap5-uevm: FAIL: last 80 lines of boot log: --------------------------------------------
if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/012 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.201 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x81000000 192.168.1.2:tmp/omap5uevm-4bY1yR/zImage tftp 0x81000000 192.168.1.2:tmp/omap5uevm-4bY1yR/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.201 Filename 'tmp/omap5uevm-4bY1yR/zImage'. Load address: 0x81000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################### 392.6 KiB/s done Bytes transferred = 3610968 (371958 hex) U-Boot# tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.201 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x82000000 Loading: *T ############################################ 86.9 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot#tftp 0x81f00000 192.168.1.2:tmp/omap5uevm-4bY1yR/omap5-uevm.dtb tftp 0x81f00000 192.168.1.2:tmp/omap5uevm-4bY1yR/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.201 Filename 'tmp/omap5uevm-4bY1yR/omap5-uevm.dtb'. Load address: 0x81f00000 Loading: *T ## 2 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.201:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U-Boot# bootz 0x81000000 0x82000000 0x81f00000 bootz 0x81000000 0x82000000 0x81f00000 Kernel image @ 0x81000000 [ 0x000000 - 0x371958 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0757c
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 78.26 seconds. # PYBOOT: Result: FAIL
sun7i-a20-cubieboard2: OFFLINE: last 80 lines of boot log: ----------------------------------------------------------
Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected
~$hardreset
Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: OFFLINE
arm-omap2plus_defconfig -----------------------
am335x-boneblack: FAIL: last 80 lines of boot log: --------------------------------------------------
[ 0.645646] RPC: Registered udp transport module. [ 0.645663] RPC: Registered tcp transport module. [ 0.645679] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.647049] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.892735] VFS: Disk quotas dquot_6.5.2 [ 0.893081] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.896377] NFS: Registering the id_resolver key type [ 0.896964] Key type id_resolver registered [ 0.896994] Key type id_legacy registered [ 0.897164] jffs2: version 2.2. (NAND) (SUMMARY) B) 2001-2006 Red Hat, Inc. [ 0.897854] msgmni has been set to 985 [ 0.903101] io scheduler noop registered [ 0.903135] io scheduler deadline registered [ 0.903230] io scheduler cfq registered (default) [ 0.905057] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.910943] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.921813] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.537799] console [ttyO0] enabled [ 1.587171] brd: module loaded [ 1.616120] loop: module loaded [ 1.629032] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.646856] usbcore: registered new interface driver asix [ 1.653885] usbcore: registered new interface driver ax88179_178a [ 1.661592] usbcore: registered new interface driver cdc_ether [ 1.668570] usbcore: registered new interface driver r815x [ 1.675017] usbcore: registered new interface driver smsc95xx [ 1.682050] usbcore: registered new interface driver net1080 [ 1.688819] usbcore: registered new interface driver cdc_subset [ 1.695648] usbcore: registered new interface driver zaurus [ 1.702402] usbcore: registered new interface driver cdc_ncm [ 1.711287] usbcore: registered new interface driver cdc_wdm [ 1.717971] usbcore: registered new interface driver usb-storage [ 1.725406] usbcore: registered new interface driver usbtest [ 1.734576] mousedev: PS/2 mouse device common for all mice [ 1.748554] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 1.757804] i2c /dev entries driver [ 1.762654] Driver for 1-wire Dallas network protocol. [ 1.774944] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.794288] ledtrig-cpu: registered to indicate activity on CPUs [ 1.803426] usbcore: registered new interface driver usbhid [ 1.809499] usbhid: USB HID core driver [ 1.815548] oprofile: no performance counters [ 1.823488] oprofile: using timer interrupt. [ 1.829191] TCP: cubic registered [ 1.832698] Initializing XFRM netlink socket [ 1.837336] NET: Registered protocol family 17 [ 1.842221] NET: Registered protocol family 15 [ 1.847418] Key type dns_resolver registered [ 1.852169] ThumbEE CPU extension supported. [ 1.861902] regulator-dummy: disabling [ 1.882538] DCDC1: at 1500 mV [ 1.889149] vdd_mpu: 925 <--> 1325 mV at 1100 mV [ 1.897028] vdd_core: 925 <--> 1150 mV at 1100 mV [ 1.905359] LDO1: at 1800 mV [ 1.911611] LDO2: at 3300 mV [ 1.918986] LDO3: 1800 mV [ 1.924707] LDO4: at 3300 mV [ 1.931065] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.936801] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.008388] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.014830] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.024921] libphy: 4a101000.mdio: probed [ 2.029310] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.039517] Random MACID = ca:9d:5d:e1:2e:73 [ 2.051899] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.064053] net eth0: initializing cpsw version 1.12 (0) [ 2.072233] net eth0: phy found : id is : 0x7c0f1 [ 2.077236] libphy: PHY 4a101000.mdio:01 not found [ 2.082351] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 5.148870] libphy: 4a101000.mdio:00 - Link is Up - 100/Full [ 5.168925] IP-Config: Complete: [ 5.172351] device=eth0, hwaddr=ca:9d:5d:e1:2e:73, ipaddr=192.168.1.150, mask=255.255.255.0, gw=192.168.1.254 [ 5.183337] host=192.168.1.150, domain=, nis-domain=(none) [ 5.189658] bootserver=192.168.1.2, rootserver=192.168.1.2, rootpath= [ 5.196711] nameserver0=192.168.1.254 [ 5.205487] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 108.84 seconds. # PYBOOT: Result: FAIL
arm-multi_v7_defconfig ----------------------
am335x-boneblack: FAIL: last 80 lines of boot log: --------------------------------------------------
musb-hdrc: 28/31 max ep, 16384/16384 memory USB Peripheral mode controller at 47401000 using PIO, IRQ 0 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Host mode controller at 47401800 using PIO, IRQ 0 OMAP SD/MMC: 0 mmc_send_cmd : timeout: No status update reading u-boot.img reading u-boot.img
U-Boot 2013.04-dirty (May 20 2013 - 14:30:06)
I2C: ready DRAM: 512 MiB WARNING: Caches not enabled NAND: No NAND device found!!! 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Warning - readenv() failed, using default environment
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Peripheral mode controller at 47401000 using PIO, IRQ 0 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Host mode controller at 47401800 using PIO, IRQ 0 Net: <ethaddr> not set. Validating first E-fuse MAC Phy not found PHY reset timed out cpsw, usb_ether Hit any key to stop autoboot: 1 0 U-Boot# U-Boot#version version
U-Boot 2013.04-dirty (May 20 2013 - 14:30:06) arm-angstrom-linux-gnueabi-gcc (Linaro GCC 4.7-2013.02-01) 4.7.3 20130205 (prerelease) GNU ld (GNU Binutils) 2.22 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 U-Boot#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' U-Boot# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp link up on port 0, speed 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 BOOTP broadcast 7 BOOTP broadcast 8 BOOTP broadcast 9 BOOTP broadcast 10 dhcp
Retry count exceeded; starting again using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC c8:a0:30:b4:18:a4 HOST MAC de:ad:be:af:00:00 RNDIS ready ~$off # PYBOOT: Exception: u-boot: ERROR: DHCP retry count exceeded. # PYBOOT: Time: 42.21 seconds. # PYBOOT: Result: FAIL