Define bindings for pwm-stm32
version 2: - use parameters instead of compatible of handle the hardware configuration
Signed-off-by: Benjamin Gaignard benjamin.gaignard@st.com --- .../devicetree/bindings/pwm/pwm-stm32.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/pwm-stm32.txt
diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt new file mode 100644 index 0000000..575b9fb --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt @@ -0,0 +1,38 @@ +STMicroelectronics PWM driver bindings for STM32 + +Must be a sub-node of STM32 general purpose timer driver +Parent node properties are describe in ../mfd/stm32-general-purpose-timer.txt + +Required parameters: +- compatible: Must be "st,stm32-pwm" +- pinctrl-names: Set to "default". +- pinctrl-0: List of phandles pointing to pin configuration nodes + for PWM module. + For Pinctrl properties, please refer to [1]. + +Optional parameters: +- st,breakinput: Set if the hardware have break input capabilities +- st,breakinput-polarity: Set break input polarity. Default is 0 + The value define the active polarity: + - 0 (active LOW) + - 1 (active HIGH) +- st,pwm-num-chan: Number of available PWM channels. Default is 0. +- st,32bits-counter: Set if the hardware have a 32 bits counter +- st,complementary: Set if the hardware have complementary output channels + +[1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + +Example: + gptimer1: gptimer1@40010000 { + compatible = "st,stm32-gptimer"; + reg = <0x40010000 0x400>; + clocks = <&rcc 0 160>; + clock-names = "clk_int"; + + pwm1@0 { + compatible = "st,stm32-pwm"; + st,pwm-num-chan = <4>; + st,breakinput; + st,complementary; + }; + };