Hi,
On 24 March 2017 at 20:41, Rob Herring robh+dt@kernel.org wrote:
On Fri, Mar 24, 2017 at 6:56 AM, Baolin Wang baolin.wang@linaro.org wrote:
Hi,
On 24 March 2017 at 19:08, Chanwoo Choi cw00.choi@samsung.com wrote:
Hi,
On 2017년 03월 20일 16:59, Baolin Wang wrote:
Now extcon-usb-gpio only supports for GPIO egdge trigger, but VBUS/ID gpios' detection can be triggered by the level trigger on some platforms. Thus intoduce one property 'extcon-gpio,level-trigger' to identify this situation.
Signed-off-by: Baolin Wang baolin.wang@linaro.org
.../devicetree/bindings/extcon/extcon-usb-gpio.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt index dfc14f7..191504b 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt @@ -9,6 +9,9 @@ Required properties: Either one of id-gpio or vbus-gpio must be present. Both can be present as well.
- id-gpio: gpio for USB ID pin. See gpio binding.
- vbus-gpio: gpio for USB VBUS pin.
+- extcon-gpio,level-trigger: Boolean, set this gpio's interrupt flag to
It is 'extcon-usb-gpio' instead of 'extcon-gpio'.
Sure.
"extcon-gpio" is not a vendor, so don't make it a vendor prefix.
OK.
+level trigger. If not specified defaults to false, gpio's interrupt flag +defaults to edge trigger.
I understand why you need the new flag. But, I'm not sure it is right way to add the new flag for interrupt flag.
IMHO, I think that we need to find the more proper way to get the interrupt flag or maybe, we may need to implement the new helper api to get the interrupt flag for gpio pin when we use the gpio as the interrupt source,
Yes, I agree with you. We already have helper functions to get interrupt flag from device tree, but we can not get the irq number of GPIO to configure in device tree, then I introduce one new flag to indicate the trigger type. But I like to change the patch if there are any good suggestion. Thanks.
The extcon binding needs an overhaul in general. I'm not going to take extensions to a broken binding. What's needed is a USB connector binding like we have for HDMI and other video connectors. And for USB-C, those need to be combined.
I am not sure I understand your points correctly, could you elaborate on how to modify for extcon? Thanks.