Chander,
I guess you wanted this reviewed internally before sending out to LAKML? CC'ing Nico and Lorenzo.
/Amit
On Mon, Jun 17, 2013 at 11:47 AM, Chander Kashyap chander.kashyap@linaro.org wrote:
This patch adds support to configure prefetch and pwr control registers of pl310 cache controllor.
Signed-off-by: Chander Kashyap chander.kashyap@linaro.org
Documentation/devicetree/bindings/arm/l2cc.txt | 6 ++++ arch/arm/include/asm/hardware/cache-l2x0.h | 23 +++++++++++++ arch/arm/mm/cache-l2x0.c | 44 ++++++++++++++++++++++++ 3 files changed, 73 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt index cbef09b..66876b6 100644 --- a/Documentation/devicetree/bindings/arm/l2cc.txt +++ b/Documentation/devicetree/bindings/arm/l2cc.txt @@ -34,6 +34,12 @@ Optional properties:
- arm,filter-ranges : <start length> Starting address and length of window to filter. Addresses in the filter window are directed to the M1 port. Other addresses will go to the M0 port.
+- arm,prefetch-control : Prefetch related configurations. Specifies 8 cells of
- prefetch-offset, not-same-ID-on-exclusive-sequence-en, incr-double-Linefill-en,
- prefetch-drop-en, data-prefetch-en, instruction-prefetch-en and
- double-linefill-en.
+- arm,pwr-control : Operting mode clock and power mode selection. Specifies two
- cells of standby-mode-en and dynamic_clk_gating_en.
- interrupts : 1 combined interrupt.
- cache-id-part: cache id part number to be used if it is not present on hardware
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 3b2c40b..188f4da 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -106,6 +106,29 @@
#define L2X0_WAY_SIZE_SHIFT 3
+#define L2X0_PREFETCH_CTRL_OFFSET_SHIFT 0 +#define L2X0_PREFETCH_CTRL_NOT_SAME_ID_SHIFT 21 +#define L2X0_PREFETCH_CTRL_INC_DOUBLE_LINEFILL_SHIFT 23 +#define L2X0_PREFETCH_CTRL_PREFETCH_DROP_SHIFT 24 +#define L2X0_PREFETCH_CTRL_DOUBLE_LINEFILL_WR_SHIFT 27 +#define L2X0_PREFETCH_CTRL_DATA_PREFETCH_EN_SHIFT 28 +#define L2X0_PREFETCH_CTRL_INSTR_PREFETCH_EN_SHIFT 29 +#define L2X0_PREFETCH_CTRL_DOUBLE_LINEFILL_EN_SHIFT 30
+#define PREFETCH_R2P0_MASK (~(1 << L2X0_PREFETCH_CTRL_OFFSET_SHIFT)) +#define PREFETCH_R3P0_MASK \
(~((1 << L2X0_PREFETCH_CTRL_NOT_SAME_ID_SHIFT) | \(1 << L2X0_PREFETCH_CTRL_INC_DOUBLE_LINEFILL_SHIFT) | \(1 << L2X0_PREFETCH_CTRL_PREFETCH_DROP_SHIFT) | \(1 << L2X0_PREFETCH_CTRL_DATA_PREFETCH_EN_SHIFT) | \(1 << L2X0_PREFETCH_CTRL_INSTR_PREFETCH_EN_SHIFT) | \(1 << L2X0_PREFETCH_CTRL_DOUBLE_LINEFILL_EN_SHIFT)))+#define PREFETCH_R3P1_MASK \
(~(1 << L2X0_PREFETCH_CTRL_DOUBLE_LINEFILL_WR_SHIFT))+#define L2X0_PWR_CTRL_STANDBY_MODE_EN_SHIFT 0 +#define L2X0_PWR_CTRL_DYNAMIC_CLK_GATE_EN_SHIFT 1
#ifndef __ASSEMBLY__ extern void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask); #if defined(CONFIG_CACHE_L2X0) && defined(CONFIG_OF) diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index c465fac..490e182 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -563,6 +563,11 @@ static void __init pl310_of_setup(const struct device_node *np, u32 data[3] = { 0, 0, 0 }; u32 tag[3] = { 0, 0, 0 }; u32 filter[2] = { 0, 0 };
u32 prefetch[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };u32 prefetch_val;u32 pwr[2] = { 0, 0 };u32 l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) &L2X0_CACHE_ID_RTL_MASK; of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag)); if (tag[0] && tag[1] && tag[2])@@ -589,6 +594,45 @@ static void __init pl310_of_setup(const struct device_node *np, writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN, l2x0_base + L2X0_ADDR_FILTER_START); }
if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) {of_property_read_u32_array(np, "arm,prefetch-control",prefetch, ARRAY_SIZE(prefetch));prefetch_val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);prefetch_val &= PREFETCH_R2P0_MASK;prefetch_val |= prefetch[0] << L2X0_PREFETCH_CTRL_OFFSET_SHIFT;if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0) {prefetch_val &= PREFETCH_R3P0_MASK;prefetch_val |=((prefetch[1]) <<L2X0_PREFETCH_CTRL_NOT_SAME_ID_SHIFT) |((prefetch[2]) <<L2X0_PREFETCH_CTRL_INC_DOUBLE_LINEFILL_SHIFT) |((prefetch[3]) <<L2X0_PREFETCH_CTRL_PREFETCH_DROP_SHIFT) |((prefetch[5]) <<L2X0_PREFETCH_CTRL_DATA_PREFETCH_EN_SHIFT) |((prefetch[6]) <<L2X0_PREFETCH_CTRL_INSTR_PREFETCH_EN_SHIFT) |((prefetch[7]) <<L2X0_PREFETCH_CTRL_DOUBLE_LINEFILL_EN_SHIFT);if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P1) {prefetch_val &= PREFETCH_R3P1_MASK;prefetch_val |=((prefetch[4]) <<L2X0_PREFETCH_CTRL_DOUBLE_LINEFILL_WR_SHIFT);}writel_relaxed(prefetch_val,l2x0_base + L2X0_PREFETCH_CTRL);of_property_read_u32_array(np, "arm,pwr-control",pwr, ARRAY_SIZE(pwr));writel_relaxed(((pwr[0]) << L2X0_PWR_CTRL_STANDBY_MODE_EN_SHIFT) |((pwr[1]) << L2X0_PWR_CTRL_DYNAMIC_CLK_GATE_EN_SHIFT),l2x0_base + L2X0_POWER_CTRL);}}}
static void __init pl310_save(void)
1.7.9.5
linaro-kernel mailing list linaro-kernel@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-kernel