Hi Al,
On Friday 06 of September 2013 14:09:52 al.stone@linaro.org wrote:
From: Al Stone ahs3@redhat.com
Corrects an obvious typo in the Arndale pinctrl descriptions in DT. The samsung-pinctrl driver uses the correct name.
Thanks for spotting this. The patch looks good to me, but is it tested on some Exynos 5250 based board?
With this typo activating configuration of these pinctrl groups just kept pin-drv at default value, as set up by bootloader, while after this patch it will be reconfigured with new values.
I'll try to test this patch on an Arndale later today.
Best regards, Tomasz
Signed-off-by: Al Stone al.stone@linaro.org
arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 44 +++++++++++++++---------------- 1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index 656e381..031e198 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -210,21 +210,21 @@ samsung,pins = "gpa0-2", "gpa0-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c2_bus: i2c2-bus { samsung,pins = "gpa0-6", "gpa0-7"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c2_hs_bus: i2c2-hs-bus { samsung,pins = "gpa0-6", "gpa0-7"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
uart2_data: uart2-data {
@@ -238,21 +238,21 @@ samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c3_bus: i2c3-bus { samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c3_hs_bus: i2c3-hs-bus { samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
uart3_data: uart3-data {
@@ -273,14 +273,14 @@ samsung,pins = "gpa2-0", "gpa2-1"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c5_bus: i2c5-bus { samsung,pins = "gpa2-2", "gpa2-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
spi1_bus: spi1-bus {
@@ -376,14 +376,14 @@ samsung,pins = "gpb3-0", "gpb3-1"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c1_hs_bus: i2c1-hs-bus { samsung,pins = "gpb3-2", "gpb3-3"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
sd0_clk: sd0-clk {
@@ -551,14 +551,14 @@ samsung,pins = "gpd0-2", "gpd0-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
dp_hpd: dp_hpd { samsung,pins = "gpx0-7"; samsung,pin-function = <3>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;@@ -650,42 +650,42 @@ "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; samsung,pin-function = <3>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_i2c2_bus: cam-i2c2-bus { samsung,pins = "gpe0-6", "gpe1-0"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_spi1_bus: cam-spi1-bus { samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3"; samsung,pin-function = <4>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_i2c1_bus: cam-i2c1-bus { samsung,pins = "gpf0-2", "gpf0-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_i2c0_bus: cam-i2c0-bus { samsung,pins = "gpf0-0", "gpf0-1"; samsung,pin-function = <2>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_spi0_bus: cam-spi0-bus { samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_bayrgb_bus: cam-bayrgb-bus {
@@ -696,7 +696,7 @@ "gpg2-0", "gpg2-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_port_a: cam-port-a {
@@ -705,7 +705,7 @@ "gph1-4", "gph1-5", "gph1-6", "gph1-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;@@ -757,7 +757,7 @@ "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
c2c_txd: c2c-txd {
@@ -767,7 +767,7 @@ "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;