next boot: 35 pass, 9 fail (next-20140324)

24 Mar 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: next
Git describe: next-20140324
Failed boot tests (console logs at the end)
===========================================
       sun7i-a20-cubieboard2:     FAIL:    multi_lpae_defconfig
  imx6dl-wandboard,wand-dual:     FAIL:    imx_v6_v7_defconfig
  imx6dl-wandboard,wand-solo:     FAIL:    imx_v6_v7_defconfig
             imx6q-wandboard:     FAIL:    imx_v6_v7_defconfig
                ste-snowball:     FAIL:    multi_v7_defconfig
       sun7i-a20-cubieboard2:     FAIL:    multi_v7_defconfig
  imx6dl-wandboard,wand-solo:     FAIL:    multi_v7_defconfig
             imx6q-wandboard:     FAIL:    multi_v7_defconfig
  imx6dl-wandboard,wand-dual:     FAIL:    multi_v7_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
               legacy,3730xm     PASS:    0 min 52.5 sec
            am335x-boneblack     PASS:    0 min 25.8 sec
             omap3-beagle-xm     PASS:    0 min 57.3 sec
           legacy,3530beagle     PASS:    0 min 38.5 sec
                 omap4-panda     PASS:    1 min  4.6 sec
            omap3-overo-tobi     PASS:    0 min 23.4 sec
                 am335x-bone     PASS:    0 min 27.6 sec
      omap3-overo-storm-tobi     PASS:    0 min 22.8 sec
                  omap5-uevm     PASS:    1 min  1.4 sec
              omap4-panda-es     PASS:    1 min 10.2 sec
            legacy,3730storm     PASS:    0 min 23.1 sec
            legacy,3530overo     PASS:    0 min 21.4 sec
multi_lpae_defconfig
--------------------
                  omap5-uevm     PASS:    1 min 39.8 sec
       sun7i-a20-cubieboard2     FAIL:    0 min 20.0 sec
tegra_defconfig
---------------
              tegra30-beaver     PASS:    0 min 17.2 sec
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     FAIL:    0 min 31.4 sec
  imx6dl-wandboard,wand-solo     FAIL:    0 min 22.8 sec
             imx6q-wandboard     FAIL:    0 min 21.0 sec
sunxi_defconfig
---------------
       sun7i-a20-cubieboard2     PASS:    0 min 22.8 sec
        sun4i-a10-cubieboard     PASS:    0 min 12.6 sec
bcm_defconfig
-------------
                 bcm28155-ap     PASS:    0 min 58.7 sec
exynos_defconfig
----------------
          exynos5250-arndale     PASS:    0 min 29.7 sec
multi_v7_defconfig
------------------
    qcom-apq8074-dragonboard     PASS:    1 min  4.2 sec
                ste-snowball     FAIL:    0 min 33.6 sec
              tegra30-beaver     PASS:    0 min 17.0 sec
            am335x-boneblack     PASS:    0 min 23.9 sec
             omap3-beagle-xm     PASS:    0 min 48.7 sec
       sun7i-a20-cubieboard2     FAIL:    0 min 22.9 sec
          armada-370-mirabox     PASS:    0 min 22.3 sec
                 omap4-panda     PASS:    0 min 52.4 sec
  armada-xp-openblocks-ax3-4     PASS:    0 min 25.0 sec
        sun4i-a10-cubieboard     PASS:    0 min 14.4 sec
                 bcm28155-ap     PASS:    0 min 58.7 sec
            omap3-overo-tobi     PASS:    0 min 22.1 sec
  imx6dl-wandboard,wand-solo     FAIL:    0 min 22.4 sec
                 am335x-bone     PASS:    0 min 26.6 sec
      omap3-overo-storm-tobi     PASS:    0 min 21.2 sec
                  omap5-uevm     PASS:    1 min 39.2 sec
             imx6q-wandboard     FAIL:    0 min 31.4 sec
              omap4-panda-es     PASS:    0 min 53.4 sec
  imx6dl-wandboard,wand-dual     FAIL:    0 min 31.4 sec
u8500_defconfig
---------------
                ste-snowball     PASS:    0 min 33.6 sec
sama5_defconfig
---------------
                  sama5d35ek     PASS:    0 min 17.4 sec
davinci_all_defconfig
---------------------
             legacy,dm365evm     PASS:    0 min 17.4 sec
Console logs for failures
=========================
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log:
    -------------------------------------------------------
setenv ethaddr 22:71:81:DA:53:EA
sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
sun7i# setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sun7i# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sun7i# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sun7i# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sun7i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
DHCP client bound to address 192.168.1.153
sun7i#setenv serverip 192.168.1.2
 setenv serverip 192.168.1.2
sun7i# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-vNPTNy/zImage
tftp 0x40008000 192.168.1.2:tmp/cubie2-vNPTNy/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-vNPTNy/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ######################################################
     2.7 MiB/s
done
Bytes transferred = 4595352 (461e98 hex)
sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x42000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun7i#tftp 0x41000000 192.168.1.2:tmp/cubie2-vNPTNy/sun7i-a20-cubieboard2.dtb
 tftp 0x41000000 192.168.1.2:tmp/cubie2-vNPTNy/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-vNPTNy/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *##
     2.5 MiB/s
done
Bytes transferred = 18209 (4721 hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x461e98 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.97 seconds.
# PYBOOT: Result: FAIL
imx_v6_v7_defconfig
-------------------
imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
Connected to wand-dual console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(wand-dual console)> hardreset
(user:khilman) Reboot wand-dual
Reboot: wand-dual ; phidget 2 1 :  off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.39 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
version
U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11)
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1
GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809
=>setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
=> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
=> dhcp
dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound to address 192.168.1.164
=> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
=> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
=> tftp 0x10800000 192.168.1.2:tmp/wand-solo-URKjvh/zImage
tftp 0x10800000 192.168.1.2:tmp/wand-solo-URKjvh/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'tmp/wand-solo-URKjvh/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################
     1.5 MiB/s
done
Bytes transferred = 5223312 (4fb390 hex)
=> tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x11100000
Loading: *############################################
     1.5 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x11000000 192.168.1.2:tmp/wand-solo-URKjvh/imx6dl-wandboard.dtb
tftp 0x11000000 192.168.1.2:tmp/wand-solo-URKjvh/imx6dl-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'tmp/wand-solo-URKjvh/imx6dl-wandboard.dtb'.
Load address: 0x11000000
Loading: *##
     1.4 MiB/s
done
Bytes transferred = 26637 (680d hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=>bootz 0x10800000 0x11100000 0x11000000
 bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100980c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 22.83 seconds.
# PYBOOT: Result: FAIL
imx6q-wandboard: FAIL: last 80 lines of boot log:
    -------------------------------------------------
U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29)
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2
GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919
=> setenv bootargs console=ttymxc0,115200
setenv bootargs console=ttymxc0,115200
=> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
=> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
=> dhcp
dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound to address 192.168.1.163
=> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
=> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
=> tftp 0x10800000 192.168.1.2:tmp/wand-quad-Quemne/zImage
tftp 0x10800000 192.168.1.2:tmp/wand-quad-Quemne/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.163
Filename 'tmp/wand-quad-Quemne/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################
     2.7 MiB/s
done
Bytes transferred = 5223312 (4fb390 hex)
=> tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.163
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x11100000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x11000000 192.168.1.2:tmp/wand-quad-Quemne/imx6q-wandboard.dtb
tftp 0x11000000 192.168.1.2:tmp/wand-quad-Quemne/imx6q-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.163
Filename 'tmp/wand-quad-Quemne/imx6q-wandboard.dtb'.
Load address: 0x11000000
Loading: *###
     2.6 MiB/s
done
Bytes transferred = 29426 (72f2 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x4fb390 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100a2f1
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.97 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
ste-snowball: FAIL: last 80 lines of boot log:
    ----------------------------------------------
CPU:	ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz
I2C:   ready
DRAM:   1 GB
MMC: 	
MCDE:  startup failed
sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2
EMMC: 0, MMC: 1
In:    serial
Out:   serial
Err:   serial
Net:   smc911x-0
Hit any key to stop autoboot:  1 
 0 
U8500 $ 
U8500 $ version
version
U-Boot 2009.11 (sept. 19 2011 - 17:03:11)
U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e
setenv ethaddr 6e:e6:84:36:8e:9e
Can't overwrite "ethaddr"
U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4
setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4
U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
U8500 $ if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
U8500 $ if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
U8500 $ setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
U8500 $ dhcp
dhcp
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 6e:e6:84:36:8e:9e
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.159
U8500 $ setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
U8500 $ if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-9EfiYm/tmpH3KDtr-uImage
tftp 0x00800000 192.168.1.2:tmp/snowball-9EfiYm/tmpH3KDtr-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 6e:e6:84:36:8e:9e
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.159
Filename 'tmp/snowball-9EfiYm/tmpH3KDtr-uImage'.
Load address: 0x800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #######################################################
done
Bytes transferred = 4611121 (465c31 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000  
bootm 0x00800000  
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4611057 Bytes =  4.4 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 33.60 seconds.
# PYBOOT: Result: FAIL
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log:
    -------------------------------------------------------
sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
sun7i#setenv initrd_high 0xffffffff
 setenv initrd_high 0xffffffff
sun7i# if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sun7i# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sun7i#setenv autoload no; setenv autoboot no
 setenv autoload no; setenv autoboot no
sun7i# dhcp
dhcp
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.153
sun7i# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
sun7i# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-WMoTzt/zImage
tftp 0x40008000 192.168.1.2:tmp/cubie2-WMoTzt/zImage
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-WMoTzt/zImage'.
Load address: 0x40008000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ####################################################
     2.7 MiB/s
done
Bytes transferred = 4569808 (45bad0 hex)
sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x42000000
Loading: *############################################
     2.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-WMoTzt/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 192.168.1.2:tmp/cubie2-WMoTzt/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 192.168.1.2; our IP address is 192.168.1.153
Filename 'tmp/cubie2-WMoTzt/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *##
     2.2 MiB/s
done
Bytes transferred = 18209 (4721 hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x45bad0 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff8000, end 40fff720 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 22.86 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
=> version
version
U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11)
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1
GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809
=> setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
=>setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
 setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
=>if test -n ${initenv}; then run initenv; fi
 if test -n ${initenv}; then run initenv; fi
=> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
=>setenv autoload no; setenv autoboot no
 setenv autoload no; setenv autoboot no
=> dhcp
dhcp
FEC Waiting for PHY auto negotiation to complete.. done
BOOTP broadcast 1
DHCP client bound to address 192.168.1.164
=> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
=> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
=> tftp 0x10800000 192.168.1.2:tmp/wand-solo-Gnxifl/zImage
tftp 0x10800000 192.168.1.2:tmp/wand-solo-Gnxifl/zImage
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'tmp/wand-solo-Gnxifl/zImage'.
Load address: 0x10800000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     ####################################################
     1.5 MiB/s
done
Bytes transferred = 4569808 (45bad0 hex)
=> tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x11100000
Loading: *############################################
     1.5 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
=> tftp 0x11000000 192.168.1.2:tmp/wand-solo-Gnxifl/imx6dl-wandboard.dtb
tftp 0x11000000 192.168.1.2:tmp/wand-solo-Gnxifl/imx6dl-wandboard.dtb
Using FEC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.164
Filename 'tmp/wand-solo-Gnxifl/imx6dl-wandboard.dtb'.
Load address: 0x11000000
Loading: *##
     1.4 MiB/s
done
Bytes transferred = 26637 (680d hex)
=>printenv bootargs
 printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100980c
Starting kernel ...
Wzð9y<l <±3òžr'<{tZ$%DJ$I%`'p0tvtBdúá²Vgk?è¶¹ëö{ý+ýi.oy`V`køÖÖ{T+_in@ÑÖg??hùÖÖ{+_ `2PakùÖö{k_nCBP`kxV9pVx^ò[/_|vð>5~023ðT"f^t~Õ¶øø?hv^@tŸô,¬(9h>~*PVg?¿Ùdi_sVØLwv~væâ;0fr0nYt_|Œ<ÒôöÍŸS@<ÐggpTÀ÷RW\T']PTVpwûV3OhOQPawx`<YVgw[oZW]·ØûÐÜÐ×s{f;O'Vë{Vc3x@Ðgk_V_z×Þ·ÙÜ¿Ð×Öîú×gkwspaw×ÔgkW}W}~V7Y{V?]TWs{f>OXws7VcýwWààÐÔgô2|\W^V7]Ô??PVszf{W'Tkxpáw=ðu>8¶¶6~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 22.41 seconds.
# PYBOOT: Result: FAIL
imx6q-wandboard: FAIL: last 80 lines of boot log:
    -------------------------------------------------
Connected to wand-quad console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(wand-quad console)> hardreset
(user:khilman) Reboot wand-quad
Reboot: wand-quad ; phidget 2 3 :  off, sleep, on
U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29)
CPU:   Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Board: Wandboard
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
*** Warning - bad CRC, using default environment
In:    serial
  0 
=> ~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.37 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log:
    ------------------------------------------------------------
Connected to wand-dual console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(wand-dual console)> hardreset
(user:khilman) Reboot wand-dual
Reboot: wand-dual ; phidget 2 1 :  off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.38 seconds.
# PYBOOT: Result: FAIL

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

next boot: 35 pass, 9 fail (next-20140324)