Currently sched_clock(), a very hot code path, is not optimized to minimise its cache profile. In particular:
1. cd is not ____cacheline_aligned,
2. struct clock_data does not distinguish between hotpath and coldpath data, reducing locality of reference in the hotpath,
3. Some hotpath data is missing from struct clock_data and is marked __read_mostly (which more or less guarantees it will not share a cache line with cd).
This patch corrects these problems by extracting all hotpath data into a separate structure and using ____cacheline_aligned to ensure the hotpath uses a single (64 byte) cache line.
Signed-off-by: Daniel Thompson daniel.thompson@linaro.org Cc: Russell King linux@arm.linux.org.uk Cc: Will Deacon will.deacon@arm.com Cc: Catalin Marinas catalin.marinas@arm.com --- kernel/time/sched_clock.c | 113 +++++++++++++++++++++++++++++++--------------- 1 file changed, 77 insertions(+), 36 deletions(-)
diff --git a/kernel/time/sched_clock.c b/kernel/time/sched_clock.c index 3d21a8719444..695b2ac2e8b4 100644 --- a/kernel/time/sched_clock.c +++ b/kernel/time/sched_clock.c @@ -18,28 +18,59 @@ #include <linux/seqlock.h> #include <linux/bitops.h>
-struct clock_data { - ktime_t wrap_kt; +/** + * struct clock_read_data - data required to read from sched_clock + * + * @epoch_ns: sched_clock value at last update + * @epoch_cyc: Clock cycle value at last update + * @sched_clock_mask: Bitmask for two's complement subtraction of non 64bit + * clocks + * @read_sched_clock: Current clock source (or dummy source when suspended) + * @mult: Multipler for scaled math conversion + * @shift: Shift value for scaled math conversion + * @suspended: Flag to indicate if the clock is suspended (stopped) + * + * Care must be taken when updating this structure; it is read by + * some very hot code paths. It occupies <=48 bytes and, when combined + * with the seqcount used to synchronize access, comfortably fits into + * a 64 byte cache line. + */ +struct clock_read_data { u64 epoch_ns; u64 epoch_cyc; - seqcount_t seq; - unsigned long rate; + u64 sched_clock_mask; + u64 (*read_sched_clock)(void); u32 mult; u32 shift; bool suspended; };
+/** + * struct clock_data - all data needed for sched_clock (including + * registration of a new clock source) + * + * @seq: Sequence counter for protecting updates. + * @read_data: Data required to read from sched_clock. + * @wrap_kt: Duration for which clock can run before wrapping + * @rate: Tick rate of the registered clock + * @actual_read_sched_clock: Registered clock read function + * + * The ordering of this structure has been chosen to optimize cache + * performance. In particular seq and read_data (combined) should fit + * into a single 64 byte cache line. + */ +struct clock_data { + seqcount_t seq; + struct clock_read_data read_data; + ktime_t wrap_kt; + unsigned long rate; +}; + static struct hrtimer sched_clock_timer; static int irqtime = -1;
core_param(irqtime, irqtime, int, 0400);
-static struct clock_data cd = { - .mult = NSEC_PER_SEC / HZ, -}; - -static u64 __read_mostly sched_clock_mask; - static u64 notrace jiffy_sched_clock_read(void) { /* @@ -49,7 +80,10 @@ static u64 notrace jiffy_sched_clock_read(void) return (u64)(jiffies - INITIAL_JIFFIES); }
-static u64 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read; +static struct clock_data cd ____cacheline_aligned = { + .read_data = { .mult = NSEC_PER_SEC / HZ, + .read_sched_clock = jiffy_sched_clock_read, }, +};
static inline u64 notrace cyc_to_ns(u64 cyc, u32 mult, u32 shift) { @@ -60,15 +94,16 @@ unsigned long long notrace sched_clock(void) { u64 cyc, res; unsigned long seq; + struct clock_read_data *rd = &cd.read_data;
do { seq = raw_read_seqcount_begin(&cd.seq);
- res = cd.epoch_ns; - if (!cd.suspended) { - cyc = read_sched_clock(); - cyc = (cyc - cd.epoch_cyc) & sched_clock_mask; - res += cyc_to_ns(cyc, cd.mult, cd.shift); + res = rd->epoch_ns; + if (!rd->suspended) { + cyc = rd->read_sched_clock(); + cyc = (cyc - rd->epoch_cyc) & rd->sched_clock_mask; + res += cyc_to_ns(cyc, rd->mult, rd->shift); } } while (read_seqcount_retry(&cd.seq, seq));
@@ -83,16 +118,17 @@ static void notrace update_sched_clock(void) unsigned long flags; u64 cyc; u64 ns; + struct clock_read_data *rd = &cd.read_data;
- cyc = read_sched_clock(); - ns = cd.epoch_ns + - cyc_to_ns((cyc - cd.epoch_cyc) & sched_clock_mask, - cd.mult, cd.shift); + cyc = rd->read_sched_clock(); + ns = rd->epoch_ns + + cyc_to_ns((cyc - rd->epoch_cyc) & rd->sched_clock_mask, + rd->mult, rd->shift);
raw_local_irq_save(flags); raw_write_seqcount_begin(&cd.seq); - cd.epoch_ns = ns; - cd.epoch_cyc = cyc; + rd->epoch_ns = ns; + rd->epoch_cyc = cyc; raw_write_seqcount_end(&cd.seq); raw_local_irq_restore(flags); } @@ -109,9 +145,9 @@ void __init sched_clock_register(u64 (*read)(void), int bits, { u64 res, wrap, new_mask, new_epoch, cyc, ns; u32 new_mult, new_shift; - ktime_t new_wrap_kt; unsigned long r; char r_unit; + struct clock_read_data *rd = &cd.read_data;
if (cd.rate > rate) return; @@ -130,17 +166,18 @@ void __init sched_clock_register(u64 (*read)(void), int bits,
/* update epoch for new counter and update epoch_ns from old counter*/ new_epoch = read(); - cyc = read_sched_clock(); - ns = cd.epoch_ns + cyc_to_ns((cyc - cd.epoch_cyc) & sched_clock_mask, - cd.mult, cd.shift); + cyc = rd->read_sched_clock(); + ns = rd->epoch_ns + + cyc_to_ns((cyc - rd->epoch_cyc) & rd->sched_clock_mask, + rd->mult, rd->shift);
raw_write_seqcount_begin(&cd.seq); - read_sched_clock = read; - sched_clock_mask = new_mask; - cd.mult = new_mult; - cd.shift = new_shift; - cd.epoch_cyc = new_epoch; - cd.epoch_ns = ns; + rd->read_sched_clock = read; + rd->sched_clock_mask = new_mask; + rd->mult = new_mult; + rd->shift = new_shift; + rd->epoch_cyc = new_epoch; + rd->epoch_ns = ns; raw_write_seqcount_end(&cd.seq);
r = rate; @@ -172,7 +209,7 @@ void __init sched_clock_postinit(void) * If no sched_clock function has been provided at that point, * make it the final one one. */ - if (read_sched_clock == jiffy_sched_clock_read) + if (cd.read_data.read_sched_clock == jiffy_sched_clock_read) sched_clock_register(jiffy_sched_clock_read, BITS_PER_LONG, HZ);
update_sched_clock(); @@ -188,17 +225,21 @@ void __init sched_clock_postinit(void)
static int sched_clock_suspend(void) { + struct clock_read_data *rd = &cd.read_data; + update_sched_clock(); hrtimer_cancel(&sched_clock_timer); - cd.suspended = true; + rd->suspended = true; return 0; }
static void sched_clock_resume(void) { - cd.epoch_cyc = read_sched_clock(); + struct clock_read_data *rd = &cd.read_data; + + rd->epoch_cyc = rd->read_sched_clock(); hrtimer_start(&sched_clock_timer, cd.wrap_kt, HRTIMER_MODE_REL); - cd.suspended = false; + rd->suspended = false; }
static struct syscore_ops sched_clock_ops = {