On hardware reduced platforms, there is no support for the following: - PM Event and Control registers - SCI interrupt (and handler) - Fixed Events - General Purpose Events (GPEs) - Global Lock - ACPI PM timer - FACS table (Waking vectors and Global Lock)
acpi_gbl_reduced_hardware is a global flag and can be used to prevent misbehavior on hardware reduced platforms, and this flag is initialized at the very beginning of the system boot when FADT is parsed, this flag is set to 1 when the FACP Hardware Reduced flag is set, so we can use it to prevent accessing registers which do not exist on reduced hardware platform.
but when FACP Hardware Reduced flag is set, ACPI drivers will still access some registers directly which do not exist on reduced hardware platform and cause boot failure:
[ 9.024370] Unable to handle kernel paging request at virtual address ffffffbffbe00001 [ 9.024423] pgd = ffffffc00007d000 [ 9.024468] [ffffffbffbe00001] *pgd=000000008007f003, *pmd=0000000000000000 [ 9.024538] Internal error: Oops: 96000006 [#1] SMP [ 9.024577] Modules linked in: [ 9.024627] CPU: 0 Not tainted (3.9.0+ #3) [ 9.024691] PC is at acpi_os_read_port+0x58/0xc8 [ 9.024753] LR is at acpi_hw_read_port+0x4c/0xc4 [ 9.024810] pc : [<ffffffc0002810cc>] lr : [<ffffffc0002a4fc4>] pstate: 600003c5 .... [ 9.031956] Call trace: [ 9.032021] [<ffffffc0002810cc>] acpi_os_read_port+0x58/0xc8 [ 9.032094] [<ffffffc0002a4fc4>] acpi_hw_read_port+0x4c/0xc4 [ 9.032165] [<ffffffc0002a4198>] acpi_hw_read+0x6c/0x100 [ 9.032237] [<ffffffc0002a4250>] acpi_hw_read_multiple+0x24/0x70 [ 9.032312] [<ffffffc0002a457c>] acpi_hw_register_read+0xa8/0x164 [ 9.032386] [<ffffffc0002a52dc>] acpi_write_bit_register+0x9c/0x194 [ 9.032472] [<ffffffc0002bffb4>] acpi_processor_get_power_info+0x6c4/0x748 [ 9.032550] [<ffffffc000565220>] acpi_processor_power_init+0xac/0x138 [ 9.032630] [<ffffffc0003f3c00>] acpi_processor_start+0x48/0x138 [ 9.032704] [<ffffffc000565118>] acpi_processor_add+0x43c/0x498 [ 9.032784] [<ffffffc000283a74>] acpi_device_probe+0x3c/0x198 [ 9.032862] [<ffffffc0002ef0fc>] driver_probe_device+0x90/0x348 [ 9.032940] [<ffffffc0002ef450>] __driver_attach+0x9c/0xa0 [ 9.033015] [<ffffffc0002ed40c>] bus_for_each_dev+0x4c/0x8c [ 9.033090] [<ffffffc0002eeb98>] driver_attach+0x20/0x28 [ 9.033166] [<ffffffc0002ee6e0>] bus_add_driver+0xfc/0x254 [ 9.033244] [<ffffffc0002ef8b0>] driver_register+0x6c/0x184 [ 9.033325] [<ffffffc000284894>] acpi_bus_register_driver+0x34/0x44 [ 9.033400] [<ffffffc000559c60>] acpi_processor_init+0x28/0x40 [ 9.033469] [<ffffffc000081438>] do_one_initcall+0x100/0x138 [ 9.033544] [<ffffffc0005448c8>] kernel_init_freeable+0x128/0x1cc [ 9.033620] [<ffffffc0003f2f90>] kernel_init+0x10/0xcc [ 9.033700] Code: d2bf7c02 f2dff7e2 f2ffffe2 8b020000 (79400000) [ 9.033843] ---[ end trace 64376967e6bc20a9 ]--- [ 9.033995] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
So acpi_gbl_reduced_hardware should be used to check if reduced hardware or not, if it is reduced hardware, just return with some error and do not access the no-existent registers.
Signed-off-by: Hanjun Guo hanjun.guo@linaro.org --- drivers/acpi/acpica/hwregs.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c index 8d2e866..4c270c3 100644 --- a/drivers/acpi/acpica/hwregs.c +++ b/drivers/acpi/acpica/hwregs.c @@ -265,6 +265,11 @@ acpi_status acpi_hw_clear_acpi_status(void)
ACPI_FUNCTION_TRACE(hw_clear_acpi_status);
+ /* If Hardware Reduced flag is set, there are no GPEs */ + if (acpi_gbl_reduced_hardware) { + return_ACPI_STATUS(AE_NOT_IMPLEMENTED); + } + ACPI_DEBUG_PRINT((ACPI_DB_IO, "About to write %04X to %8.8X%8.8X\n", ACPI_BITMASK_ALL_FIXED_STATUS, ACPI_FORMAT_UINT64(acpi_gbl_xpm1a_status.address))); @@ -305,6 +310,10 @@ struct acpi_bit_register_info *acpi_hw_get_bit_register_info(u32 register_id) { ACPI_FUNCTION_ENTRY();
+ if (acpi_gbl_reduced_hardware) { + return (NULL); + } + if (register_id > ACPI_BITREG_MAX) { ACPI_ERROR((AE_INFO, "Invalid BitRegister ID: 0x%X", register_id)); @@ -337,6 +346,11 @@ acpi_status acpi_hw_write_pm1_control(u32 pm1a_control, u32 pm1b_control)
ACPI_FUNCTION_TRACE(hw_write_pm1_control);
+ /* If Hardware Reduced flag is set, there are no PM Control registers */ + if (acpi_gbl_reduced_hardware) { + return_ACPI_STATUS(AE_NOT_IMPLEMENTED); + } + status = acpi_hw_write(pm1a_control, &acpi_gbl_FADT.xpm1a_control_block); if (ACPI_FAILURE(status)) { @@ -370,6 +384,11 @@ acpi_status acpi_hw_register_read(u32 register_id, u32 *return_value)
ACPI_FUNCTION_TRACE(hw_register_read);
+ /* If Hardware Reduced flag is set, there are no PM Control registers */ + if (acpi_gbl_reduced_hardware) { + return_ACPI_STATUS(AE_NOT_IMPLEMENTED); + } + switch (register_id) { case ACPI_REGISTER_PM1_STATUS: /* PM1 A/B: 16-bit access each */
@@ -465,6 +484,11 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value)
ACPI_FUNCTION_TRACE(hw_register_write);
+ /* If Hardware Reduced flag is set, there are no PM Control registers */ + if (acpi_gbl_reduced_hardware) { + return_ACPI_STATUS(AE_NOT_IMPLEMENTED); + } + switch (register_id) { case ACPI_REGISTER_PM1_STATUS: /* PM1 A/B: 16-bit access each */ /*