Guenter and Anton, Only one minor update as Guenter mentioned for v6, thank you.
v6 -> v7 changes: - move exporting symbols from [5/5] to [4/5], which was a mistake.
v5 -> v6 changes: - add depend on AB8500_BM in Kconfig - fix wrong usage of clamp_val() - export symbols for module compiling
v4 -> v5 changes: - split the old [2/3]-ab8500-re-arrange-ab8500-power-and-temperature-data into new three [2/5], [3/5] and [4/5] patches. - hwmon driver minor coding style clean ups: - {} usage in if-else statement in ab8500_read_sensor function - index error fix in gpadc_monitor function - fix issue of clamp_val() usage - remove unnecessary else in function abx500_attrs_visible - remove redundant print message about irq set up - return the calling function return value directly in probe function
v3 -> v4 changes: for patch [3/3] - define delays in HZ - update ab8500_read_sensor function, returning temp by parameter - remove ab8500_is_visible function - use clamp_val in set_min and set_max callback - remove unnecessary locks in remove and suspend functions - let abx500 and ab8500 use its own data structure for patch [2/3] - move the data tables from driver/power/ab8500_bmdata.c to include/linux/power/ab8500.h - rename driver/power/ab8500_bmdata.c to driver/power/ab8500_bm.c - rename these variable names to eliminate CamelCase warnings - add const attribute to these data
v2 -> v3 changes: - Add interface for converting voltage to temperature - Remove temp5 sensor since we cannot offer temperature read interface of it - Update hyst to use absolute temperature instead of a difference - Add the 3/3 patch
v1 -> v2 changes: - Add Documentation/hwmon/abx500 and Documentation/hwmon/abx500 - Make devices which cannot report milli-Celsius invisible - Add temp5_crit interface - Re-work the old find_active_thresholds() to threshold_updated() - Reset updated_min_alarm and updated_max_alarm at the end of each loop - Update the hyst mechamisn to make it works as real hyst - Remove non-stand attributes - Re-order the operations sequence inside probe and remove functions - Update all the lock usages to eliminate race conditions - Make attibutes index starts from 0 also changes: - Since the old [1/2] "ARM: ux500: rename ab8500 to abx500 for hwmon driver" has been merged by Samuel, so won't send it again. - Add another new patch "ab8500_btemp: export two symblols" as [2/2] of this patch set.
Hongbo Zhang (5): ab8500_btemp: make ab8500_btemp_get* interfaces public ab8500: power: eliminate CamelCase warning of some variables ab8500: power: add const attributes to some data arrays ab8500: power: export abx500_res_to_temp tables for hwmon hwmon: add ST-Ericsson ABX500 hwmon driver
Documentation/hwmon/ab8500 | 22 ++ Documentation/hwmon/abx500 | 28 ++ drivers/hwmon/Kconfig | 13 + drivers/hwmon/Makefile | 1 + drivers/hwmon/ab8500.c | 206 +++++++++++++++ drivers/hwmon/abx500.c | 491 +++++++++++++++++++++++++++++++++++ drivers/hwmon/abx500.h | 69 +++++ drivers/power/ab8500_bmdata.c | 42 +-- drivers/power/ab8500_btemp.c | 5 +- drivers/power/ab8500_fg.c | 4 +- include/linux/mfd/abx500.h | 6 +- include/linux/mfd/abx500/ab8500-bm.h | 5 + include/linux/power/ab8500.h | 16 ++ 13 files changed, 885 insertions(+), 23 deletions(-) create mode 100644 Documentation/hwmon/ab8500 create mode 100644 Documentation/hwmon/abx500 create mode 100644 drivers/hwmon/ab8500.c create mode 100644 drivers/hwmon/abx500.c create mode 100644 drivers/hwmon/abx500.h create mode 100644 include/linux/power/ab8500.h