On 01/14/2015 05:34 PM, Kevin Hilman wrote:
From: Kevin Hilman khilman@linaro.org
Add support for "ina231" as compatible string, and update Documentation and Kconfig accordingly.
Tested with the Exynos5422-based odroid-xu3 board which has on-board INA231 sensors.
Signed-off-by: Kevin Hilman khilman@linaro.org
Applied to -next after minor cleanup (see below).
Documentation/hwmon/ina2xx | 9 +++++++++ drivers/hwmon/Kconfig | 4 ++-- drivers/hwmon/ina2xx.c | 1 + 3 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx index 4223c2d3b508..c2f838f65ee4 100644 --- a/Documentation/hwmon/ina2xx +++ b/Documentation/hwmon/ina2xx @@ -26,6 +26,12 @@ Supported chips: Datasheet: Publicly available at the Texas Instruments website http://www.ti.com/
- Texas Instruments INA231
Prefix: 'ina231'
Addresses: I2C 0x40 - 0x4f
Datasheet: Publicly available at the Texas Instruments website
http://www.ti.com/Author: Lothar Felten l-felten@ti.com
Description
@@ -44,6 +50,9 @@ The INA226 monitors both a shunt voltage drop and bus supply voltage. The INA230 is a high or low side current shunt and power monitor with an I2C interface. The INA230 monitors both a shunt voltage drop and bus supply voltage.
+The INA231 is a high or low side current shunt and power monitor with an I2C +interface. The INA230 monitors both a shunt voltage drop and bus supply voltage.
The INA231 ...
I fixed this up and merged above two paragraphs into one.
Guenter