Separate the W90X900(W90P910) on-chip host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before W90X900(W90P910) can be booted with a multi-platform kernel

and an ehci driver that only works on one of them.

With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the w90X900 bus glue.

Signed-off-by: Manjunath Goudar manjunath.goudar@linaro.org Acked-by: Arnd Bergmann arnd@arndb.de Cc: Greg KH greg@kroah.com Cc: Alan Stern stern@rowland.harvard.edu Cc: Wan ZongShun mcuos.com@gmail.com Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org

V2: -Arranged #include's in alphabetical order. -Replaced "w90p910" by "w90x900" because it is supports all series of w90x900. --- drivers/usb/host/Kconfig | 2 +- drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-hcd.c | 5 --- drivers/usb/host/ehci-w90x900.c | 85 ++++++++++++++++----------------------- 4 files changed, 37 insertions(+), 56 deletions(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index ba52912..7bc598b 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -244,7 +244,7 @@ config USB_EHCI_MV SoCs, see USB_EHCI_HCD_ORION for those.

config USB_W90X900_EHCI - bool "W90X900(W90P910) EHCI support" + tristate "W90X900(W90P910) EHCI support" depends on ARCH_W90X900 ---help--- Enables support for the W90X900 USB controller diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 7664db8..28adb3f 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o obj-$(CONFIG_USB_EHCI_MV) += ehci-mv.o +obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o

obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 5717dcd..4a5644e 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1249,11 +1249,6 @@ MODULE_LICENSE ("GPL"); #define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver #endif

-#ifdef CONFIG_USB_W90X900_EHCI -#include "ehci-w90x900.c" -#define PLATFORM_DRIVER ehci_hcd_w90x900_driver -#endif - #ifdef CONFIG_USB_OCTEON_EHCI #include "ehci-octeon.c" #define PLATFORM_DRIVER ehci_octeon_driver diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c index 59e0e24..4d6631d 100644 --- a/drivers/usb/host/ehci-w90x900.c +++ b/drivers/usb/host/ehci-w90x900.c @@ -11,13 +11,28 @@ * */

+#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> #include <linux/platform_device.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "ehci.h"

/* enable phy0 and phy1 for w90p910 */ #define ENPHY (0x01<<8) #define PHY0_CTR (0xA4) #define PHY1_CTR (0xA8)

+#define DRIVER_DESC "EHCI w90x900 driver" + +static const char hcd_name[] = "ehci-w90x900 "; + +static struct hc_driver __read_mostly ehci_w90x900_hc_driver; + static int usb_w90x900_probe(const struct hc_driver *driver, struct platform_device *pdev) { @@ -99,54 +114,6 @@ void usb_w90x900_remove(struct usb_hcd *hcd, struct platform_device *pdev) usb_put_hcd(hcd); }

-static const struct hc_driver ehci_w90x900_hc_driver = { - .description = hcd_name, - .product_desc = "Nuvoton w90x900 EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_USB2|HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .reset = ehci_setup, - .start = ehci_run, - - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, -#endif - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - static int ehci_w90x900_probe(struct platform_device *pdev) { if (usb_disabled()) @@ -173,7 +140,25 @@ static struct platform_driver ehci_hcd_w90x900_driver = { }, };

+static int __init ehci_w90X900_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ehci_init_driver(&ehci_w90x900_hc_driver, NULL); + return platform_driver_register(&ehci_hcd_w90x900_driver); +} +module_init(ehci_w90X900_init); + +static void __exit ehci_w90X900_cleanup(void) +{ + platform_driver_unregister(&ehci_hcd_w90x900_driver); +} +module_exit(ehci_w90X900_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR("Wan ZongShun mcuos.com@gmail.com"); -MODULE_DESCRIPTION("w90p910 usb ehci driver!"); -MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:w90p910-ehci"); +MODULE_LICENSE("GPL v2");