queue boot: 39 pass, 5 fail (v3.12.16) - linaro-kernel

3 Apr 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: queue
Git describe: v3.12.16
Failed boot tests (console logs at the end)
===========================================
                  omap5-uevm:     FAIL:    omap2plus_defconfig
                  omap5-uevm:     FAIL:    multi_lpae_defconfig
                  omap5-uevm:     FAIL:    multi_v7_defconfig
                   da850-evm:     FAIL:    davinci_all_defconfig
          armada-370-mirabox:     FAIL:    mvebu_defconfig
Full Report
===========
da8xx_omapl_defconfig
---------------------
                   da850-evm     0 min 15.0 sec:     PASS
             legacy,da850evm     0 min 14.1 sec:     PASS
omap2plus_defconfig
-------------------
               legacy,3730xm     0 min 52.5 sec:     PASS
            am335x-boneblack     0 min 25.5 sec:     PASS
             omap3-beagle-xm     0 min 55.8 sec:     PASS
           legacy,3530beagle     0 min 39.6 sec:     PASS
                 omap4-panda     1 min  1.2 sec:     PASS
                  omap3-tobi     0 min 21.8 sec:     PASS
                 am335x-bone     0 min 26.8 sec:     PASS
                  omap5-uevm     1 min 26.1 sec:     FAIL
              omap4-panda-es     1 min  5.5 sec:     PASS
            legacy,3730storm     0 min 21.2 sec:     PASS
            legacy,3530overo     0 min 21.8 sec:     PASS
multi_lpae_defconfig
--------------------
                  omap5-uevm     1 min 12.1 sec:     FAIL
       sun7i-a20-cubieboard2     0 min 13.5 sec:     PASS
tegra_defconfig
---------------
              tegra30-beaver     0 min 16.9 sec:     PASS
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     0 min 17.6 sec:     PASS
  imx6dl-wandboard,wand-solo     0 min 18.2 sec:     PASS
             imx6q-wandboard     0 min 16.4 sec:     PASS
bcm_defconfig
-------------
                 bcm28155-ap     0 min 23.1 sec:     PASS
exynos_defconfig
----------------
          exynos5250-arndale     0 min 29.9 sec:     PASS
multi_v7_defconfig
------------------
                ste-snowball     0 min 28.1 sec:     PASS
              tegra30-beaver     0 min 14.2 sec:     PASS
            am335x-boneblack     0 min 32.2 sec:     PASS
             omap3-beagle-xm     0 min 54.6 sec:     PASS
       sun7i-a20-cubieboard2     0 min 13.8 sec:     PASS
          armada-370-mirabox     0 min 20.6 sec:     PASS
                 omap4-panda     1 min  5.7 sec:     PASS
  armada-xp-openblocks-ax3-4     0 min 22.6 sec:     PASS
        sun4i-a10-cubieboard     0 min 18.3 sec:     PASS
                 bcm28155-ap     0 min 25.9 sec:     PASS
  imx6dl-wandboard,wand-solo     0 min 17.3 sec:     PASS
                  omap3-tobi     0 min 20.5 sec:     PASS
                 am335x-bone     0 min 38.9 sec:     PASS
                  omap5-uevm     1 min 15.6 sec:     FAIL
             imx6q-wandboard     0 min 16.6 sec:     PASS
              omap4-panda-es     1 min 12.0 sec:     PASS
  imx6dl-wandboard,wand-dual     0 min 17.3 sec:     PASS
u8500_defconfig
---------------
                ste-snowball     0 min 33.8 sec:     PASS
sama5_defconfig
---------------
                  sama5d35ek     0 min 17.3 sec:     PASS
davinci_all_defconfig
---------------------
             legacy,dm365evm     0 min 16.6 sec:     PASS
                   da850-evm     0 min 40.8 sec:     FAIL
mvebu_defconfig
---------------
  armada-xp-openblocks-ax3-4     0 min 21.9 sec:     PASS
          armada-370-mirabox     0 min 48.2 sec:     FAIL
Console logs for failures
=========================
omap2plus_defconfig
-------------------
omap5-uevm: FAIL: last 80 lines of boot log:
    --------------------------------------------
USB0:   USB EHCI 1.00
scanning bus 0 for devices... found: 002/057 2
3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
U-Boot# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
U-Boot# dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.200
U-Boot# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
U-Boot# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-ImtVAs/zImage
tftp 0x82000000 192.168.1.2:tmp/omap5uevm-ImtVAs/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.200
Filename 'tmp/omap5uevm-ImtVAs/zImage'.
Load address: 0x82000000
Loading: *EHCI timed out on TD - token=0x8008d80
T #################################################################
     #################################################################
     #################################################################
     #################################################################
     ########################
     412.1 KiB/s
done
Bytes transferred = 4168944 (3f9cf0 hex)
U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.200
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *EHCI timed out on TD - token=0x88008d80
T ############################################
     63.5 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-ImtVAs/omap5-uevm.dtb
tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-ImtVAs/omap5-uevm.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.200
Filename 'tmp/omap5uevm-ImtVAs/omap5-uevm.dtb'.
Load address: 0x80f80000
Loading: *EHCI timed out on TD - token=0x88008d80
T ##
     2.9 KiB/s
done
Bytes transferred = 17789 (457d hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254
U-Boot# bootz 0x82000000 0x81000000 0x80f80000
bootz 0x82000000 0x81000000 0x80f80000
Kernel image @ 0x82000000 [ 0x000000 - 0x3f9cf0 ]
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   Using Device Tree in place at 80f80000, end 80f8757c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 86.13 seconds.
# PYBOOT: Result: FAIL
multi_lpae_defconfig
--------------------
omap5-uevm: FAIL: last 80 lines of boot log:
    --------------------------------------------
if test -n ${initenv}; then run initenv; fi
U-Boot# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... found: 002/057 2
3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
U-Boot# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
U-Boot# dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.200
U-Boot# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
U-Boot# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-NNJpx4/zImage
tftp 0x82000000 192.168.1.2:tmp/omap5uevm-NNJpx4/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.200
Filename 'tmp/omap5uevm-NNJpx4/zImage'.
Load address: 0x82000000
Loading: *T #################################################################
     #################################################################
     #################################################################
     ##################################################
     518.6 KiB/s
done
Bytes transferred = 3583792 (36af30 hex)
U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.200
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *T ############################################
     103.5 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot#tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-NNJpx4/omap5-uevm.dtb
 tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-NNJpx4/omap5-uevm.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.200
Filename 'tmp/omap5uevm-NNJpx4/omap5-uevm.dtb'.
Load address: 0x80f80000
Loading: *T ##
     2.9 KiB/s
done
Bytes transferred = 17789 (457d hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254
U-Boot# bootz 0x82000000 0x81000000 0x80f80000
bootz 0x82000000 0x81000000 0x80f80000
Kernel image @ 0x82000000 [ 0x000000 - 0x36af30 ]
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   Using Device Tree in place at 80f80000, end 80f8757c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 72.08 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
omap5-uevm: FAIL: last 80 lines of boot log:
    --------------------------------------------
U-Boot# if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... found: 002/043 2
3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
U-Boot# setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
U-Boot# dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.200
U-Boot# setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
U-Boot# if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-sRQigb/zImage
tftp 0x82000000 192.168.1.2:tmp/omap5uevm-sRQigb/zImage
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.200
Filename 'tmp/omap5uevm-sRQigb/zImage'.
Load address: 0x82000000
Loading: *T #################################################################
     #################################################################
     #################################################################
     #################################################
     458 KiB/s
done
Bytes transferred = 3567320 (366ed8 hex)
U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.200
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x81000000
Loading: *EHCI timed out on TD - token=0x88008d80
T ############################################
     87.9 KiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-sRQigb/omap5-uevm.dtb
tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-sRQigb/omap5-uevm.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.200
Filename 'tmp/omap5uevm-sRQigb/omap5-uevm.dtb'.
Load address: 0x80f80000
Loading: *T ##
     2 KiB/s
done
Bytes transferred = 17789 (457d hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254
U-Boot# bootz 0x82000000 0x81000000 0x80f80000
bootz 0x82000000 0x81000000 0x80f80000
Kernel image @ 0x82000000 [ 0x000000 - 0x366ed8 ]
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   Using Device Tree in place at 80f80000, end 80f8757c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 75.56 seconds.
# PYBOOT: Result: FAIL
davinci_all_defconfig
---------------------
da850-evm: FAIL: last 80 lines of boot log:
    -------------------------------------------
Starting SPI Memory Copy...
Valid magicnum, 0x55424CBB, found at offset 0x00010000.
   DONE
Jumping to entry point at 0xC1080000.
MMC:   davinci: 0
SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB
*** Warning - bad CRC, using default environment
In:    serial
Out:   serial
Err:   serial
SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB
Net:   DaVinci-EMAC
Hit any key to stop autoboot:  3 
 0 
U-Boot > 
U-Boot > version
version
U-Boot 2014.01-dirty (Feb 27 2014 - 15:12:48)
arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3
GNU ld (GNU Binutils for Ubuntu) 2.23.52.20130913
U-Boot > setenv bootargs console=ttyS2,115200n8 debug earlyprintk
setenv bootargs console=ttyS2,115200n8 debug earlyprintk
U-Boot > if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
U-Boot > if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
U-Boot > setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
U-Boot > dhcp
dhcp
BOOTP broadcast 1
DHCP client bound to address 192.168.1.194
U-Boot >setenv serverip 192.168.1.2
 setenv serverip 192.168.1.2
U-Boot > if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
U-Boot > tftp 0xc0800000 192.168.1.2:tmp/da850evm-LEUr8O/zImage-dtb-N0adJJ
tftp 0xc0800000 192.168.1.2:tmp/da850evm-LEUr8O/zImage-dtb-N0adJJ
Using DaVinci-EMAC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.194
Filename 'tmp/da850evm-LEUr8O/zImage-dtb-N0adJJ'.
Load address: 0xc0800000
Loading: *#################################################################
     #################################################################
     ###########
     1.7 MiB/s
done
Bytes transferred = 2068905 (1f91a9 hex)
U-Boot > tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot
Using DaVinci-EMAC device
TFTP from server 192.168.1.2; our IP address is 192.168.1.194
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0xc0c00000
Loading: *############################################
     1.7 MiB/s
done
Bytes transferred = 642602 (9ce2a hex)
U-Boot > printenv bootargs
printenv bootargs
bootargs=console=ttyS2,115200n8 debug earlyprintk
U-Boot >bootz 0xc0800000 0xc0c00000 
 bootz 0xc0800000 0xc0c00000 
Kernel image @ 0xc0800000 [ 0x000000 - 0x1f77a0 ]
## Loading init Ramdisk from Legacy Image at c0c00000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 40.76 seconds.
# PYBOOT: Result: FAIL
mvebu_defconfig
---------------
armada-370-mirabox: FAIL: last 80 lines of boot log:
    ----------------------------------------------------
phy16= 72 
phy16= 72 
MMC:   MRVL_MMC: 0
Net:   egiga0 [PRIME], egiga1
Hit any key to stop autoboot:  
3  0 
Marvell>> 
Marvell>> version
version
U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ
Marvell>> setenv bootargs console=ttyS0,115200 debug earlyprintk
setenv bootargs console=ttyS0,115200 debug earlyprintk
Marvell>> setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
Marvell>> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
Marvell>>if test -n ${preboot}; then run preboot; fi
 if test -n ${preboot}; then run preboot; fi
Marvell>> setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
Marvell>> dhcp
dhcp
phyaddr= 0
BOOTP broadcast 1
DHCP client bound to address 192.168.1.183
Marvell>> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
Marvell>> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
Marvell>tftp 0x02000000 192.168.1.2:tmp/mirabox-q9iauC/tmp6QBPzT-uImage
...
tftp 0x02000000 192.168.1.2:tmp/mirabox-q9iauC/tmp6QBPzT-uImage
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.183
Filename 'tmp/mirabox-q9iauC/tmp6QBPzT-uImage'.
Load address: 0x2000000
Loading: *#################################################################
     #################################################################
     ###################################################
done
Bytes transferred = 2654317 (28806d hex)
Marvell>> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.183
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x3000000
Loading: *############################################
done
Bytes transferred = 642602 (9ce2a hex)
Marvell>> printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk
Marvell>> bootm 0x02000000 0x03000000 
bootm 0x02000000 0x03000000 
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux
   Created:      2014-04-03   1:02:10 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2654253 Bytes =  2.5 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 48.23 seconds.
# PYBOOT: Result: FAIL