Full Report

31 Oct 2013


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: next
Git describe: next-20131031
Failed boot tests (console logs at the end)
===========================================
            am335x-boneblack:     FAIL:    omap2plus_defconfig
             omap3-beagle-xm:     FAIL:    omap2plus_defconfig
                 am335x-bone:     FAIL:    omap2plus_defconfig
                 omap4-panda:     FAIL:    omap2plus_defconfig
              omap4-panda-es:     FAIL:    omap2plus_defconfig
        omap3-tobi,3730storm:     FAIL:    omap2plus_defconfig
        omap3-tobi,3530overo:     FAIL:    omap2plus_defconfig
              tegra30-beaver:     FAIL:    tegra_defconfig
  imx6dl-wandboard,wand-dual:     FAIL:    imx_v6_v7_defconfig
  imx6dl-wandboard,wand-solo:     FAIL:    imx_v6_v7_defconfig
             imx6q-wandboard:     FAIL:    imx_v6_v7_defconfig
  armada-xp-openblocks-ax3-4:     FAIL:    mvebu_defconfig
          armada-370-mirabox:     FAIL:    mvebu_defconfig
          exynos5250-arndale:     FAIL:    exynos_defconfig
                ste-snowball:     FAIL:    multi_v7_defconfig
              tegra30-beaver:     FAIL:    multi_v7_defconfig
            am335x-boneblack:     FAIL:    multi_v7_defconfig
             omap3-beagle-xm:     FAIL:    multi_v7_defconfig
          armada-370-mirabox:     FAIL:    multi_v7_defconfig
                 omap4-panda:     FAIL:    multi_v7_defconfig
              omap4-panda-es:     FAIL:    multi_v7_defconfig
  armada-xp-openblocks-ax3-4:     FAIL:    multi_v7_defconfig
        sun4i-a10-cubieboard:     FAIL:    multi_v7_defconfig
  imx6dl-wandboard,wand-solo:     FAIL:    multi_v7_defconfig
                 am335x-bone:     FAIL:    multi_v7_defconfig
             imx6q-wandboard:     FAIL:    multi_v7_defconfig
        omap3-tobi,3730storm:     FAIL:    multi_v7_defconfig
  imx6dl-wandboard,wand-dual:     FAIL:    multi_v7_defconfig
        omap3-tobi,3530overo:     FAIL:    multi_v7_defconfig
                ste-snowball:     FAIL:    u8500_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
            am335x-boneblack     FAIL:    0 min 30.5 sec
             omap3-beagle-xm     FAIL:    0 min 44.8 sec
                 am335x-bone     FAIL:    0 min 29.4 sec
                 omap4-panda     FAIL:    0 min 56.0 sec
              omap4-panda-es     FAIL:    0 min 55.4 sec
        omap3-tobi,3730storm     FAIL:    0 min 28.2 sec
        omap3-tobi,3530overo     FAIL:    0 min 27.1 sec
tegra_defconfig
---------------
              tegra30-beaver     FAIL:    0 min 12.7 sec
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     FAIL:    0 min 22.2 sec
  imx6dl-wandboard,wand-solo     FAIL:    0 min 22.1 sec
             imx6q-wandboard     FAIL:    0 min 20.2 sec
mvebu_defconfig
---------------
  armada-xp-openblocks-ax3-4     FAIL:    0 min 28.9 sec
          armada-370-mirabox     FAIL:    0 min 27.8 sec
exynos_defconfig
----------------
          exynos5250-arndale     FAIL:    0 min 33.4 sec
multi_v7_defconfig
------------------
                ste-snowball     FAIL:    0 min 29.7 sec
              tegra30-beaver     FAIL:    0 min 23.9 sec
            am335x-boneblack     FAIL:    0 min 30.1 sec
             omap3-beagle-xm     FAIL:    0 min 44.5 sec
          armada-370-mirabox     FAIL:    0 min 28.6 sec
                 omap4-panda     FAIL:    0 min 55.3 sec
              omap4-panda-es     FAIL:    0 min 57.3 sec
  armada-xp-openblocks-ax3-4     FAIL:    0 min 30.4 sec
        sun4i-a10-cubieboard     FAIL:    0 min  6.9 sec
  imx6dl-wandboard,wand-solo     FAIL:    0 min 21.2 sec
                 am335x-bone     FAIL:    0 min 28.9 sec
             imx6q-wandboard     FAIL:    0 min 19.9 sec
        omap3-tobi,3730storm     FAIL:    0 min 28.1 sec
  imx6dl-wandboard,wand-dual     FAIL:    0 min 21.2 sec
        omap3-tobi,3530overo     FAIL:    0 min 26.7 sec
u8500_defconfig
---------------
                ste-snowball     FAIL:    0 min 28.2 sec
sama5_defconfig
---------------
                  sama5d35ek     PASS:    0 min 17.4 sec
Console logs for failures
=========================
omap2plus_defconfig
-------------------
am335x-boneblack: FAIL: last 24 lines of boot log:
    --------------------------------------------------
done
Bytes transferred = 17911 (45f7 hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO0,115200n8 root=/dev/nfs nfsroot=192.168.1.2:/export/rootfs,nolock rw ip=dhcp
U-Boot# bootz 0x80200000 0x81000000 0x81f00000
bootz 0x80200000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 9f19b000, end 9f237300 ... OK
   Using Device Tree in place at 81f00000, end 81f075f6
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 30.54 seconds.
# PYBOOT: Result: FAIL
omap3-beagle-xm: FAIL: last 24 lines of boot log:
    -------------------------------------------------
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.152
Filename 'tmp/3730xm-dzheqm/omap3-beagle-xm.dtb'.
Load address: 0x81f00000
Loading: *T ##
     2 KiB/s
done
Bytes transferred = 14683 (395b hex)
OMAP3 beagleboard.org #printenv bootargs
 printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
OMAP3 beagleboard.org # bootz ${loadaddr} - 0x81f00000
bootz ${loadaddr} - 0x81f00000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Device Tree to 8fff9000, end 8ffff95a ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 44.82 seconds.
# PYBOOT: Result: FAIL
am335x-bone: FAIL: last 24 lines of boot log:
    ---------------------------------------------
done
Bytes transferred = 17315 (43a3 hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.174:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U-Boot# bootz 0x80200000 0x81000000 0x81f00000
bootz 0x80200000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 8f19b000, end 8f237300 ... OK
   Using Device Tree in place at 81f00000, end 81f073a2
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 29.35 seconds.
# PYBOOT: Result: FAIL
omap4-panda: FAIL: last 24 lines of boot log:
    ---------------------------------------------
2 KiB/s
done
Bytes transferred = 19948 (4dec hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.173:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f07deb
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 55.97 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log:
    ------------------------------------------------
2 KiB/s
done
Bytes transferred = 20188 (4edc hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.163:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f07edb
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 55.44 seconds.
# PYBOOT: Result: FAIL
omap3-tobi,3730storm: FAIL: last 24 lines of boot log:
    ------------------------------------------------------
smc911x: MAC 00:15:c9:28:f0:11
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.159
Filename 'tmp/3730storm-fN5GAo/omap3-tobi.dtb'.
Load address: 0x81f00000
Loading: *#
     2 MiB/s
done
Bytes transferred = 14381 (382d hex)
Overo # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Overo # bootz ${loadaddr} - 0x81f00000
bootz ${loadaddr} - 0x81f00000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Device Tree to 8fff9000, end 8ffff82c ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.21 seconds.
# PYBOOT: Result: FAIL
omap3-tobi,3530overo: FAIL: last 24 lines of boot log:
    ------------------------------------------------------
done
Bytes transferred = 14381 (382d hex)
Overo # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.151:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Overo # bootz ${loadaddr} 0x81000000 0x81f00000
bootz ${loadaddr} 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 8ff63000, end 8ffff300 ... OK
   Loading Device Tree to 8ff5c000, end 8ff6282c ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 27.08 seconds.
# PYBOOT: Result: FAIL
tegra_defconfig
---------------
tegra30-beaver: FAIL: last 24 lines of boot log:
    ------------------------------------------------
[    0.000000] 3f00: 00000000 c07a7ce0 fe206000 00000000 c084d1ec fe30e400 00000000 c078f3f8
[    0.000000] 3f20: fe206030 00000007 00000001 c084d1ec c084d1ec c07e9370 c07b3f2c c084d210
[    0.000000] 3f40: 00000000 c1862924 c07f263c 00000004 00000001 c07f244c c084d1a0 c07906bc
[    0.000000] 3f60: 00000001 00000002 00000004 00000000 00000000 00000000 c07ac018 c1862924
[    0.000000] 3f80: c07ac018 c07b2000 c07a06d8 c07ba380 ffffffff c1868880 00000000 c078e61c
[    0.000000] 3fa0: c07ae2e0 c07ac264 c07ba380 c0803140 c07ba380 c07753c0 80000001 c07729a0
[    0.000000] 3fc0: ffffffff ffffffff c0772578 00000000 00000000 c07a06d8 10c5387d c07ba3cc
[    0.000000] 3fe0: c07a06d4 c07bee10 8000406a 412fc099 00000000 80008074 00000000 00000000
[    0.000000] [<c03c4aec>] (_clk_register+0x1a0/0x208) from [<c03c4b8c>] (clk_register+0x38/0x70)
[    0.000000] [<c03c4b8c>] (clk_register+0x38/0x70) from [<c03c5890>] (clk_register_gate+0xac/0x108)
[    0.000000] [<c03c5890>] (clk_register_gate+0xac/0x108) from [<c078f3f8>] (tegra_super_clk_gen4_init+0x1a4/0x2d0)
[    0.000000] [<c078f3f8>] (tegra_super_clk_gen4_init+0x1a4/0x2d0) from [<c07906bc>] (tegra30_clock_init+0x754/0xaf4)
[    0.000000] [<c07906bc>] (tegra30_clock_init+0x754/0xaf4) from [<c078e61c>] (of_clk_init+0x40/0x60)
[    0.000000] [<c078e61c>] (of_clk_init+0x40/0x60) from [<c07753c0>] (time_init+0x28/0x30)
[    0.000000] [<c07753c0>] (time_init+0x28/0x30) from [<c07729a0>] (start_kernel+0x1f8/0x340)
[    0.000000] [<c07729a0>] (start_kernel+0x1f8/0x340) from [<80008074>] (0x80008074)
[    0.000000] Code: e5886000 e5934014 e3540000 1affffb7 (e5970000) 
[    0.000000] ---[ end trace 13adc9301e6db314 ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
~$off
# PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000
# PYBOOT: Time: 12.72 seconds.
# PYBOOT: Result: FAIL
imx_v6_v7_defconfig
-------------------
imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log:
    ------------------------------------------------------------
1.5 MiB/s
done
Bytes transferred = 33645 (836d hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.179:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=>bootz 0x10800000 0x11100000 0x11000000
 bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100b36c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 22.17 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-solo: FAIL: last 24 lines of boot log:
    ------------------------------------------------------------
1.4 MiB/s
done
Bytes transferred = 33645 (836d hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.180:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100b36c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 22.05 seconds.
# PYBOOT: Result: FAIL
imx6q-wandboard: FAIL: last 24 lines of boot log:
    -------------------------------------------------
Bytes transferred = 35284 (89d4 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.181:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x4b1da0 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100b9d3
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.25 seconds.
# PYBOOT: Result: FAIL
mvebu_defconfig
---------------
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
    ------------------------------------------------------------
Image Name:   Linux
   Created:      2013-10-31  11:15:51 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2699697 Bytes = 2.6 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.86 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log:
    ----------------------------------------------------
Image Name:   Linux
   Created:      2013-10-31  11:15:23 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2696054 Bytes =  2.6 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 kB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 27.76 seconds.
# PYBOOT: Result: FAIL
exynos_defconfig
----------------
exynos5250-arndale: FAIL: last 24 lines of boot log:
    ----------------------------------------------------
tftp 0x407c0000 tmp/arndale-GPniWF/exynos5250-arndale.dtb
Waiting for Ethernet connection... done.
Using asx0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.171
Filename 'tmp/arndale-GPniWF/exynos5250-arndale.dtb'.
Load address: 0x407c0000
Loading: *###
done
Bytes transferred = 33005 (80ed hex)
ARNDALE5250 # printenv bootargs
printenv bootargs
bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.171:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
ARNDALE5250 # bootz 0x40800000 - 0x407c0000
bootz 0x40800000 - 0x407c0000
## Flattened Device Tree blob at 407c0000
   Booting using the fdt blob at 0x407c0000
   Using Device Tree in place at 407c0000, end 407cb0ec
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 33.39 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
ste-snowball: FAIL: last 24 lines of boot log:
    ----------------------------------------------
#################################################################
     ######################################################
done
Bytes transferred = 3649556 (37b014 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.184:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000  
bootm 0x00800000  
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3649492 Bytes =  3.5 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 29.67 seconds.
# PYBOOT: Result: FAIL
tegra30-beaver: FAIL: last 24 lines of boot log:
    ------------------------------------------------
Bytes transferred = 20920 (51b8 hex)
Tegra30 (Beaver) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 debug earlyprintk
Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000
bootz 0x81000000 0x82000000 0x83000000
Kernel image @ 0x81000000 [ 0x000000 - 0x376188 ]
## Loading init Ramdisk from Legacy Image at 82000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Using Device Tree in place at 83000000, end 830081b7
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 23.91 seconds.
# PYBOOT: Result: FAIL
am335x-boneblack: FAIL: last 24 lines of boot log:
    --------------------------------------------------
done
Bytes transferred = 17911 (45f7 hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO0,115200n8 root=/dev/nfs nfsroot=192.168.1.2:/export/rootfs,nolock rw ip=dhcp
U-Boot# bootz 0x80200000 0x81000000 0x81f00000
bootz 0x80200000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 9f19b000, end 9f237300 ... OK
   Using Device Tree in place at 81f00000, end 81f075f6
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 30.08 seconds.
# PYBOOT: Result: FAIL
omap3-beagle-xm: FAIL: last 24 lines of boot log:
    -------------------------------------------------
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.152
Filename 'tmp/3730xm-Cwtkd0/omap3-beagle-xm.dtb'.
Load address: 0x81f00000
Loading: *T ##
     1000 Bytes/s
done
Bytes transferred = 14683 (395b hex)
OMAP3 beagleboard.org # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
OMAP3 beagleboard.org #bootz ${loadaddr} - 0x81f00000
 bootz ${loadaddr} - 0x81f00000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Device Tree to 8fff9000, end 8ffff95a ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 44.46 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log:
    ----------------------------------------------------
Image Name:   Linux
   Created:      2013-10-31  11:02:08 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3639158 Bytes =  3.5 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 kB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.56 seconds.
# PYBOOT: Result: FAIL
omap4-panda: FAIL: last 24 lines of boot log:
    ---------------------------------------------
2 KiB/s
done
Bytes transferred = 19948 (4dec hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.173:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f07deb
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 55.28 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log:
    ------------------------------------------------
2 KiB/s
done
Bytes transferred = 20188 (4edc hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.163:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f07edb
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 57.30 seconds.
# PYBOOT: Result: FAIL
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
    ------------------------------------------------------------
Image Name:   Linux
   Created:      2013-10-31  11:05:22 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3642801 Bytes = 3.5 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 30.38 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log:
    ------------------------------------------------------
U-Boot 2011.09-rc1 (Nov 26 2012 - 14:01:52) Allwinner Technology 
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1
GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809
sunxi#setenv ethaddr 2e:40:70:f0:12:08
setenv ethaddr 2e:40:70:f0:12:08
sunxi#setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sunxi#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
sunxi#setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sunxi#if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sunxi#if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sunxi#setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sunxi#dhcp
dhcp
Unknown command 'dhcp' - try 'help'
sunxi#~$off
# PYBOOT: Exception: u-boot: does not support DHCP.  Giving up.
# PYBOOT: Time: 6.92 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-solo: FAIL: last 24 lines of boot log:
    ------------------------------------------------------------
1.4 MiB/s
done
Bytes transferred = 33645 (836d hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.180:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100b36c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 21.21 seconds.
# PYBOOT: Result: FAIL
am335x-bone: FAIL: last 24 lines of boot log:
    ---------------------------------------------
done
Bytes transferred = 17315 (43a3 hex)
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.174:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U-Boot# bootz 0x80200000 0x81000000 0x81f00000
bootz 0x80200000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 8f19b000, end 8f237300 ... OK
   Using Device Tree in place at 81f00000, end 81f073a2
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.86 seconds.
# PYBOOT: Result: FAIL
imx6q-wandboard: FAIL: last 24 lines of boot log:
    -------------------------------------------------
Bytes transferred = 35284 (89d4 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.181:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x376188 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100b9d3
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.91 seconds.
# PYBOOT: Result: FAIL
omap3-tobi,3730storm: FAIL: last 24 lines of boot log:
    ------------------------------------------------------
smc911x: MAC 00:15:c9:28:f0:11
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.159
Filename 'tmp/3730storm-M_Vbyr/omap3-tobi.dtb'.
Load address: 0x81f00000
Loading: *#
     2 MiB/s
done
Bytes transferred = 14381 (382d hex)
Overo # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Overo # bootz ${loadaddr} - 0x81f00000
bootz ${loadaddr} - 0x81f00000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Device Tree to 8fff9000, end 8ffff82c ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.09 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log:
    ------------------------------------------------------------
1.5 MiB/s
done
Bytes transferred = 33645 (836d hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.179:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=>bootz 0x10800000 0x11100000 0x11000000
 bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100b36c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 21.19 seconds.
# PYBOOT: Result: FAIL
omap3-tobi,3530overo: FAIL: last 24 lines of boot log:
    ------------------------------------------------------
done
Bytes transferred = 14381 (382d hex)
Overo # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.151:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Overo # bootz ${loadaddr} 0x81000000 0x81f00000
bootz ${loadaddr} 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Ramdisk to 8ff63000, end 8ffff300 ... OK
   Loading Device Tree to 8ff5c000, end 8ff6282c ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 26.69 seconds.
# PYBOOT: Result: FAIL
u8500_defconfig
---------------
ste-snowball: FAIL: last 24 lines of boot log:
    ----------------------------------------------
#################################################################
     ###
done
Bytes transferred = 2897156 (2c3504 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.184:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000  
bootm 0x00800000  
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2897092 Bytes =  2.8 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.25 seconds.
# PYBOOT: Result: FAIL

next boot: 1 pass, 30 fail (next-20131031)

Full Report

omap2plus_defconfig

tegra_defconfig

imx_v6_v7_defconfig

mvebu_defconfig

exynos_defconfig

multi_v7_defconfig

u8500_defconfig

sama5_defconfig

Console logs for failures

omap2plus_defconfig

am335x-boneblack: FAIL: last 24 lines of boot log:

omap3-beagle-xm: FAIL: last 24 lines of boot log:

am335x-bone: FAIL: last 24 lines of boot log:

omap4-panda: FAIL: last 24 lines of boot log:

omap4-panda-es: FAIL: last 24 lines of boot log:

omap3-tobi,3730storm: FAIL: last 24 lines of boot log:

omap3-tobi,3530overo: FAIL: last 24 lines of boot log:

tegra_defconfig

tegra30-beaver: FAIL: last 24 lines of boot log:

imx_v6_v7_defconfig

imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log:

imx6dl-wandboard,wand-solo: FAIL: last 24 lines of boot log:

imx6q-wandboard: FAIL: last 24 lines of boot log:

mvebu_defconfig

armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:

armada-370-mirabox: FAIL: last 24 lines of boot log:

exynos_defconfig

exynos5250-arndale: FAIL: last 24 lines of boot log:

multi_v7_defconfig

ste-snowball: FAIL: last 24 lines of boot log:

tegra30-beaver: FAIL: last 24 lines of boot log:

am335x-boneblack: FAIL: last 24 lines of boot log:

omap3-beagle-xm: FAIL: last 24 lines of boot log:

armada-370-mirabox: FAIL: last 24 lines of boot log:

omap4-panda: FAIL: last 24 lines of boot log:

omap4-panda-es: FAIL: last 24 lines of boot log:

armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:

sun4i-a10-cubieboard: FAIL: last 24 lines of boot log:

imx6dl-wandboard,wand-solo: FAIL: last 24 lines of boot log:

am335x-bone: FAIL: last 24 lines of boot log:

imx6q-wandboard: FAIL: last 24 lines of boot log:

omap3-tobi,3730storm: FAIL: last 24 lines of boot log:

imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log:

omap3-tobi,3530overo: FAIL: last 24 lines of boot log:

u8500_defconfig

ste-snowball: FAIL: last 24 lines of boot log:

Full Report

omap2plus_defconfig

tegra_defconfig

imx_v6_v7_defconfig

mvebu_defconfig

exynos_defconfig

multi_v7_defconfig

u8500_defconfig

sama5_defconfig

Console logs for failures

omap2plus_defconfig

tegra_defconfig

imx_v6_v7_defconfig

mvebu_defconfig

exynos_defconfig

multi_v7_defconfig

u8500_defconfig