=== Device Tree === * imx5 board level DT series is ready for v3.2 merge window. * Reviewed Rajendra's regulator DT series, and tested it with mc13892. Some issue with different level 'struct dev' was found and is being discussed.
=== Consolidation === * Reviewed Linus.W's pinctrl series about pin configuration part gave input there as far as imx iomuxc controller concerned. * Working on migrate imx6 clock to common clock v2 series from Mike Turquette
=== Misc === * The imx6q series has been pulled into arm-soc tree by Arnd for v3.2 merge window. * As suggested by Pengutronix, they want to get Sascha relieved from the burden of maintaining MXS (imx23 and imx28) sub-architecture. Since I brought the most of MXS core code to mainline, I stepped up for maintaining MXS. This will start when v3.2 merge window closes. I expect some amount of time will be spent on that at daily basis. * The book of Orlando travel was cancelled.
On Tue, Oct 25, 2011 at 12:17 AM, Shawn Guo shawn.guo@freescale.com wrote:
=== Device Tree === * imx5 board level DT series is ready for v3.2 merge window.
Shawn,
As we discussed last time, there are still many drivers not fully converted to DT, what's the status for those drivers?
* Reviewed Rajendra's regulator DT series, and tested it with mc13892. Some issue with different level 'struct dev' was found and is being discussed.
=== Consolidation === * Reviewed Linus.W's pinctrl series about pin configuration part gave input there as far as imx iomuxc controller concerned. * Working on migrate imx6 clock to common clock v2 series from Mike Turquette
=== Misc === * The imx6q series has been pulled into arm-soc tree by Arnd for v3.2 merge window. * As suggested by Pengutronix, they want to get Sascha relieved from the burden of maintaining MXS (imx23 and imx28) sub-architecture. Since I brought the most of MXS core code to mainline, I stepped up for maintaining MXS. This will start when v3.2 merge window closes. I expect some amount of time will be spent on that at daily basis. * The book of Orlando travel was cancelled.
-- Regards, Shawn
On Tue, Oct 25, 2011 at 11:30:00AM +0800, Eric Miao wrote:
On Tue, Oct 25, 2011 at 12:17 AM, Shawn Guo shawn.guo@freescale.com wrote:
=== Device Tree === * imx5 board level DT series is ready for v3.2 merge window.
Shawn,
As we discussed last time, there are still many drivers not fully converted to DT, what's the status for those drivers?
I do not have the full list of those drivers. As far as I'm concerned, USB and Audio are the big missing pieces. And I'm currently working on mc13892 regulator driver.
I know you must mean more, but please do not expect that I can convert every single imx driver to DT, or at least do not expect that I can do in a short time. After all, I'm human being and I need to sleep :)
On Tue, Oct 25, 2011 at 12:37 PM, Shawn Guo shawn.guo@freescale.com wrote:
On Tue, Oct 25, 2011 at 11:30:00AM +0800, Eric Miao wrote:
On Tue, Oct 25, 2011 at 12:17 AM, Shawn Guo shawn.guo@freescale.com wrote:
=== Device Tree === * imx5 board level DT series is ready for v3.2 merge window.
Shawn,
As we discussed last time, there are still many drivers not fully converted to DT, what's the status for those drivers?
I do not have the full list of those drivers. As far as I'm concerned, USB and Audio are the big missing pieces. And I'm currently working on mc13892 regulator driver.
I know you must mean more, but please do not expect that I can convert every single imx driver to DT, or at least do not expect that I can do in a short time. After all, I'm human being and I need to sleep :)
Nah, you've already done a fantastic job beyond human being :-)
I'm just trying to figure out how many need to be converted over. Thanks for the heads up.
On Tue, Oct 25, 2011 at 12:38:31PM +0800, Eric Miao wrote:
=== Device Tree === * imx5 board level DT series is ready for v3.2 merge window.
Shawn,
As we discussed last time, there are still many drivers not fully converted to DT, what's the status for those drivers?
I do not have the full list of those drivers. As far as I'm concerned, USB and Audio are the big missing pieces. And I'm currently working on mc13892 regulator driver.
I know you must mean more, but please do not expect that I can convert every single imx driver to DT, or at least do not expect that I can do in a short time. After all, I'm human being and I need to sleep :)
Nah, you've already done a fantastic job beyond human being :-)
I'm just trying to figure out how many need to be converted over. Thanks for the heads up.
But asking more widely, is there an argument for us to keep a per-platform checklist of what drivers need to be converted over?
And a secondary question, has there been any resistance to upstreaming converted drivers, or do we not know the answer to that question yet?
On Wed, Oct 26, 2011 at 02:12:30PM +0800, Shawn Guo wrote:
On Tue, Oct 25, 2011 at 12:17:17AM +0800, Shawn Guo wrote: [...]
- The book of Orlando travel was cancelled.
Surprisingly, I was just told by my Freescale manager that I can go. The travel is re-booked now. See you guys at Orlando \o/
You rock, Shawn. Looking forward to seeing you there,
On 26 October 2011 08:12, Shawn Guo shawn.guo@freescale.com wrote:
On Tue, Oct 25, 2011 at 12:17:17AM +0800, Shawn Guo wrote: [...]
* The book of Orlando travel was cancelled.
Surprisingly, I was just told by my Freescale manager that I can go. The travel is re-booked now. See you guys at Orlando \o/
Congratulations! See you in a few days!
~Deepak
linaro-kernel@lists.linaro.org