next boot: 13 pass, 24 fail (next-20140130) - linaro-kernel

30 Jan 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: next
Git describe: next-20140130
Failed boot tests (console logs at the end)
===========================================
                 omap4-panda:     FAIL:    omap2plus_defconfig
              omap4-panda-es:     FAIL:    omap2plus_defconfig
        omap3-tobi,3730storm:     FAIL:    omap2plus_defconfig
       sun7i-a20-cubieboard2:     FAIL:    multi_lpae_defconfig
              tegra30-beaver:     FAIL:    tegra_defconfig
             imx6q-wandboard:     FAIL:    imx_v6_v7_defconfig
       sun7i-a20-cubieboard2:     FAIL:    sunxi_defconfig
        sun4i-a10-cubieboard:     FAIL:    sunxi_defconfig
          exynos5250-arndale:     FAIL:    exynos_defconfig
                ste-snowball:     FAIL:    multi_v7_defconfig
              tegra30-beaver:     FAIL:    multi_v7_defconfig
       sun7i-a20-cubieboard2:     FAIL:    multi_v7_defconfig
          armada-370-mirabox:     FAIL:    multi_v7_defconfig
                 omap4-panda:     FAIL:    multi_v7_defconfig
              omap4-panda-es:     FAIL:    multi_v7_defconfig
  armada-xp-openblocks-ax3-4:     FAIL:    multi_v7_defconfig
        sun4i-a10-cubieboard:     FAIL:    multi_v7_defconfig
                 bcm28155-ap:     FAIL:    multi_v7_defconfig
             imx6q-wandboard:     FAIL:    multi_v7_defconfig
        omap3-tobi,3730storm:     FAIL:    multi_v7_defconfig
  imx6dl-wandboard,wand-dual:     FAIL:    multi_v7_defconfig
                ste-snowball:     FAIL:    u8500_defconfig
  armada-xp-openblocks-ax3-4:     FAIL:    mvebu_defconfig
          armada-370-mirabox:     FAIL:    mvebu_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
            am335x-boneblack     PASS:    0 min 26.4 sec
             omap3-beagle-xm     PASS:    0 min 58.5 sec
                 am335x-bone     PASS:    0 min 32.3 sec
                 omap4-panda     FAIL:    0 min 58.2 sec
              omap4-panda-es     FAIL:    0 min 58.8 sec
        omap3-tobi,3730storm     FAIL:    1 min 20.3 sec
        omap3-tobi,3530overo     PASS:    0 min 22.9 sec
multi_lpae_defconfig
--------------------
       sun7i-a20-cubieboard2     FAIL:    0 min 19.8 sec
tegra_defconfig
---------------
              tegra30-beaver     FAIL:    0 min 12.0 sec
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     PASS:    0 min 18.6 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 18.7 sec
             imx6q-wandboard     FAIL:    0 min 20.8 sec
sunxi_defconfig
---------------
       sun7i-a20-cubieboard2     FAIL:    0 min 17.5 sec
        sun4i-a10-cubieboard     FAIL:    0 min 18.8 sec
bcm_defconfig
-------------
                 bcm28155-ap     PASS:    1 min  4.0 sec
exynos_defconfig
----------------
          exynos5250-arndale     FAIL:    0 min 34.3 sec
multi_v7_defconfig
------------------
                ste-snowball     FAIL:    0 min 33.3 sec
              tegra30-beaver     FAIL:    0 min 24.2 sec
            am335x-boneblack     PASS:    0 min 23.6 sec
             omap3-beagle-xm     PASS:    0 min 48.1 sec
       sun7i-a20-cubieboard2     FAIL:    0 min 24.7 sec
          armada-370-mirabox     FAIL:    0 min 29.0 sec
                 omap4-panda     FAIL:    0 min 56.6 sec
              omap4-panda-es     FAIL:    0 min 57.8 sec
  armada-xp-openblocks-ax3-4     FAIL:    0 min 31.6 sec
        sun4i-a10-cubieboard     FAIL:    0 min 24.2 sec
                 bcm28155-ap     FAIL:    16 min 23.5 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 17.7 sec
                 am335x-bone     PASS:    0 min 25.9 sec
             imx6q-wandboard     FAIL:    0 min 20.5 sec
        omap3-tobi,3730storm     FAIL:    0 min 29.3 sec
  imx6dl-wandboard,wand-dual     FAIL:    0 min 22.1 sec
        omap3-tobi,3530overo     PASS:    0 min 21.4 sec
u8500_defconfig
---------------
                ste-snowball     FAIL:    0 min 28.2 sec
sama5_defconfig
---------------
                  sama5d35ek     PASS:    0 min 17.6 sec
mvebu_defconfig
---------------
  armada-xp-openblocks-ax3-4     FAIL:    0 min 29.3 sec
          armada-370-mirabox     FAIL:    0 min 27.9 sec
Console logs for failures
=========================
omap2plus_defconfig
-------------------
omap4-panda: FAIL: last 24 lines of boot log:
    ---------------------------------------------
8.8 KiB/s
done
Bytes transferred = 50077 (c39d hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f0f39c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 58.17 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log:
    ------------------------------------------------
8.8 KiB/s
done
Bytes transferred = 50489 (c539 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 58.75 seconds.
# PYBOOT: Result: FAIL
omap3-tobi,3730storm: FAIL: last 24 lines of boot log:
    ------------------------------------------------------
[    5.978454] [<c008fc60>] (generic_handle_irq) from [<c000eda8>] (handle_IRQ+0x4c/0xb4)
[    5.986816] [<c000eda8>] (handle_IRQ) from [<c00085b4>] (omap3_intc_handle_irq+0x60/0x74)
[    5.995452] [<c00085b4>] (omap3_intc_handle_irq) from [<c054c424>] (__irq_svc+0x44/0x5c)
[    6.003997] Exception stack(0xde0efcc0 to 0xde0efd08)
[    6.009307] fcc0: de3b8480 01003600 fa0b4000 34020001 de0efd2c de3b8000 de3b8000 00008002
[    6.017944] fce0: de4d5606 de4d5600 de0efde6 00000000 00000000 de0efd08 c044f6f4 c0438640
[    6.026580] fd00: 20000113 ffffffff
[    6.030273] [<c054c424>] (__irq_svc) from [<c0438640>] (mmc_start_request+0xc4/0xe0)
[    6.038421] [<c0438640>] (mmc_start_request) from [<c0438768>] (__mmc_start_req+0x54/0x84)
[    6.047149] [<c0438768>] (__mmc_start_req) from [<c0438c08>] (mmc_wait_for_cmd+0x58/0x88)
[    6.055786] [<c0438c08>] (mmc_wait_for_cmd) from [<c0442704>] (mmc_io_rw_direct_host+0xa4/0x13c)
[    6.065032] [<c0442704>] (mmc_io_rw_direct_host) from [<c04434c8>] (sdio_read_cis+0x168/0x298)
[    6.074127] [<c04434c8>] (sdio_read_cis) from [<c04419ac>] (mmc_sdio_init_card+0x3e0/0xaa4)
[    6.082946] [<c04419ac>] (mmc_sdio_init_card) from [<c0442378>] (mmc_attach_sdio+0x78/0x360)
[    6.091857] [<c0442378>] (mmc_attach_sdio) from [<c043aec8>] (mmc_rescan+0x260/0x2e8)
[    6.100097] [<c043aec8>] (mmc_rescan) from [<c005917c>] (process_one_work+0x1ac/0x4c4)
[    6.108459] [<c005917c>] (process_one_work) from [<c005a014>] (worker_thread+0x114/0x3b4)
[    6.117095] [<c005a014>] (worker_thread) from [<c005fc08>] (kthread+0xcc/0xe8)
[    6.124725] [<c005fc08>] (kthread) from [<c000e548>] (ret_from_fork+0x14/0x2c)
[    6.132324] ---[ end trace d01bc6cc5911634f ]---
~$off
# PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'>
# PYBOOT: Time: 80.30 seconds.
# PYBOOT: Result: FAIL
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
    -------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x4437f8 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.82 seconds.
# PYBOOT: Result: FAIL
tegra_defconfig
---------------
tegra30-beaver: FAIL: last 24 lines of boot log:
    ------------------------------------------------
[    0.000000] r10: ffffffff  r9 : ffffffff  r8 : 3fefffc0
[    0.000000] r7 : ffffffff  r6 : 0000001c  r5 : 00000040  r4 : 00000000
[    0.000000] r3 : 00000000  r2 : 00000000  r1 : ffffffdc  r0 : 3fefffc0
[    0.000000] Flags: nzcv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
[    0.000000] Control: 10c5387d  Table: 8000404a  DAC: 00000015
[    0.000000] Process swapper (pid: 0, stack limit = 0xc07ce240)
[    0.000000] Stack: (0xc07cfef4 to 0xc07d0000)
[    0.000000] fee0:                                              c079da18 ffffffff c001bad8
[    0.000000] ff00: ffffffff 00000000 c06b9b1c c07e1b78 00000000 ffffffff 0000001c c079dbec
[    0.000000] ff20: ffffffff c07d63f4 00080800 c0800000 ffff1000 000ae7f5 00001000 00000007
[    0.000000] ff40: 00000200 c07b8000 c07b8000 c07d63c8 c06b9b1c c07e1b78 c07dae70 c081d680
[    0.000000] ff60: c085b20c c0790fa8 ffffffff 10c5387d c07dae70 c081d540 00000001 ffffffff
[    0.000000] ff80: c07ce000 00000000 c07d63c0 00000000 00000000 c0575f70 c06b869c c081d540
[    0.000000] ffa0: 00000001 ffffffff c07ce000 00000000 c07d63c0 00000000 00000000 c078e838
[    0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c07bbd78 10c5387d c07d640c
[    0.000000] ffe0: c07bbd74 c07daf80 8000406a 412fc099 00000000 80008074 00000000 00000000
[    0.000000] Code: e3110020 18a0500c 18a0500c e3110010 (18a0500c) 
[    0.000000] ---[ end trace 3406ff24bd97382e ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
~$off
# PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address 3fefffc0
# PYBOOT: Time: 12.04 seconds.
# PYBOOT: Result: FAIL
imx_v6_v7_defconfig
-------------------
imx6q-wandboard: FAIL: last 24 lines of boot log:
    -------------------------------------------------
Bytes transferred = 25751 (6497 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x4e5800 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 11009496
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.84 seconds.
# PYBOOT: Result: FAIL
sunxi_defconfig
---------------
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
    -------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1b05f8 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 17.49 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log:
    ------------------------------------------------------
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1b05f8 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 18.75 seconds.
# PYBOOT: Result: FAIL
exynos_defconfig
----------------
exynos5250-arndale: FAIL: last 24 lines of boot log:
    ----------------------------------------------------
tftp 0x407c0000 192.168.1.2:tmp/arndale-KsQ1Mq/exynos5250-arndale.dtb
Waiting for Ethernet connection... done.
Using asx0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.167
Filename 'tmp/arndale-KsQ1Mq/exynos5250-arndale.dtb'.
Load address: 0x407c0000
Loading: *###
done
Bytes transferred = 33440 (82a0 hex)
ARNDALE5250 #printenv bootargs
 printenv bootargs
bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.167:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
ARNDALE5250 # bootz 0x40800000 - 0x407c0000
bootz 0x40800000 - 0x407c0000
## Flattened Device Tree blob at 407c0000
   Booting using the fdt blob at 0x407c0000
   Using Device Tree in place at 407c0000, end 407cb29f
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 34.26 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
ste-snowball: FAIL: last 24 lines of boot log:
    ----------------------------------------------
#################################################################
     ##############################################
done
Bytes transferred = 4481177 (446099 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000  
bootm 0x00800000  
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4481113 Bytes =  4.3 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 33.33 seconds.
# PYBOOT: Result: FAIL
tegra30-beaver: FAIL: last 24 lines of boot log:
    ------------------------------------------------
Bytes transferred = 23808 (5d00 hex)
Tegra30 (Beaver) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 debug earlyprintk
Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000
bootz 0x81000000 0x82000000 0x83000000
Kernel image @ 0x81000000 [ 0x000000 - 0x43d5a0 ]
## Loading init Ramdisk from Legacy Image at 82000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Using Device Tree in place at 83000000, end 83008cff
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 24.23 seconds.
# PYBOOT: Result: FAIL
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
    -------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x43d5a0 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 24.72 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log:
    ----------------------------------------------------
Image Name:   Linux
   Created:      2014-01-30   5:07:19 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4455810 Bytes =  4.2 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 kB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 29.04 seconds.
# PYBOOT: Result: FAIL
omap4-panda: FAIL: last 24 lines of boot log:
    ---------------------------------------------
5.9 KiB/s
done
Bytes transferred = 50077 (c39d hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f0f39c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 56.61 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log:
    ------------------------------------------------
8.8 KiB/s
done
Bytes transferred = 50489 (c539 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 57.83 seconds.
# PYBOOT: Result: FAIL
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
    ------------------------------------------------------------
Image Name:   Linux
   Created:      2014-01-30   5:10:27 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4460484 Bytes = 4.3 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 31.59 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log:
    ------------------------------------------------------
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x43d5a0 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 24.20 seconds.
# PYBOOT: Result: FAIL
bcm28155-ap: FAIL: last 24 lines of boot log:
    ---------------------------------------------
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__
    _call(self.context, command, ignore_failure, timeout)
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call
    context.run_command(cmd, failok=ignore_failure)
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command
    rc = subprocess.check_call(command, **output_args)
  File "/usr/lib/python2.7/subprocess.py", line 511, in check_call
    raise CalledProcessError(retcode, cmd)
CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124
<LAVA_DISPATCHER>2014-01-30 05:30:19 AM INFO: CriticalError
<LAVA_DISPATCHER>2014-01-30 05:30:19 AM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.).
ErrorMessage: Failed to boot test image.
Lava failed at action boot_linaro_image with error:Failed to boot test image.
Traceback (most recent call last):
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run
    action.run(**params)
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run
    raise CriticalError("Failed to boot test image.")
CriticalError: Failed to boot test image.
Reboot: capri ; ip9258 1 3 :  ['off']
<LAVA_DISPATCHER>2014-01-30 05:30:19 AM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/%27%7D
<LAVA_DISPATCHER>2014-01-30 05:30:20 AM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/f042c2596abf5a6526ec1a22d9cf1c7c7...
LBOOT: Result: FAIL
LBOOT: Time: 983.48 seconds.
imx6q-wandboard: FAIL: last 24 lines of boot log:
    -------------------------------------------------
Bytes transferred = 25751 (6497 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x43d5a0 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 11009496
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.47 seconds.
# PYBOOT: Result: FAIL
omap3-tobi,3730storm: FAIL: last 24 lines of boot log:
    ------------------------------------------------------
smc911x: MAC 00:15:c9:28:f0:11
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/3730storm-IqdbQb/omap3-tobi.dtb'.
Load address: 0x81f00000
Loading: *####
     2.3 MiB/s
done
Bytes transferred = 56692 (dd74 hex)
Overo # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Overo # bootz ${loadaddr} - 0x81f00000
bootz ${loadaddr} - 0x81f00000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Device Tree to 8ffef000, end 8ffffd73 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 29.26 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log:
    ------------------------------------------------------------
1.5 MiB/s
done
Bytes transferred = 24398 (5f4e hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.165:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 11008f4d
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 22.12 seconds.
# PYBOOT: Result: FAIL
u8500_defconfig
---------------
ste-snowball: FAIL: last 24 lines of boot log:
    ----------------------------------------------
#################################################################
     ######
done
Bytes transferred = 2939433 (2cda29 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $bootm 0x00800000  
 bootm 0x00800000  
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2939369 Bytes =  2.8 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.18 seconds.
# PYBOOT: Result: FAIL
mvebu_defconfig
---------------
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
    ------------------------------------------------------------
Image Name:   Linux
   Created:      2014-01-30   5:39:42 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2773612 Bytes = 2.6 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 29.27 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log:
    ----------------------------------------------------
Image Name:   Linux
   Created:      2014-01-30   5:39:14 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2768938 Bytes =  2.6 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 kB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 27.89 seconds.
# PYBOOT: Result: FAIL