Automated DT boot report for various ARM defconfigs.

Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo').

Tree/Branch: next/master Git describe: next-20130923 Commit: 1fa8f71dfa Add linux-next specific files for 20130923

Failed boot tests (console logs at the end) =========================================== omap3-beagle: FAIL: arm-omap2plus_defconfig

Full Report ===========

arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec imx6q-wandboard PASS: 0 min 15.1 sec

arm-omap2plus_defconfig ----------------------- am335x-boneblack PASS: 0 min 31.9 sec omap3-beagle-xm PASS: 0 min 51.2 sec am335x-bone PASS: 0 min 26.3 sec omap3-tobi,3530overo PASS: 0 min 42.4 sec omap4-panda PASS: 1 min 8.2 sec omap4-panda-es PASS: 1 min 15.0 sec omap3-tobi,3730storm PASS: 0 min 42.2 sec omap3-beagle FAIL: 0 min 18.7 sec

arm-multi_v7_defconfig ---------------------- am335x-boneblack PASS: 0 min 31.7 sec omap3-beagle-xm PASS: 0 min 51.8 sec omap4-panda-es PASS: 1 min 13.9 sec omap4-panda PASS: 1 min 0.8 sec sun4i-a10-cubieboard PASS: 0 min 11.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec omap3-tobi,3530overo PASS: 0 min 40.9 sec am335x-bone PASS: 0 min 33.4 sec imx6q-wandboard PASS: 0 min 15.8 sec omap3-tobi,3730storm PASS: 0 min 40.2 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 53.8 sec

arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 29.6 sec

arm-sama5_defconfig ------------------- sama5d35ek PASS: 0 min 18.3 sec

Console logs for failures =========================

arm-omap2plus_defconfig -----------------------

omap3-beagle: FAIL: last 24 lines of boot log: ----------------------------------------------

if test -n ${initenv}; then run initenv; fi OMAP3 beagleboard.org # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 ~$off # PYBOOT: Exception: u-boot: ERROR: timed-out getting DHCP address. # PYBOOT: Time: 18.69 seconds. # PYBOOT: Result: FAIL