Automated DT boot report for various ARM defconfigs.

Tree/Branch: arm-soc Git describe: v3.14-rc3-479-g87b00e7 Failed boot tests (console logs at the end) ===========================================

Full Report ===========

multi_v7_defconfig ------------------ omap4-panda PASS: 0 min 57.0 sec omap3-overo-storm-tobi PASS: 0 min 24.2 sec sun7i-a20-cubieboard2 PASS: 0 min 14.6 sec armada-370-mirabox PASS: 0 min 22.4 sec omap4-panda-es DEAD: 0 min 0.0 sec

Console logs for failures =========================

multi_v7_defconfig ------------------

omap4-panda-es: DEAD: last 80 lines of boot log: ------------------------------------------------

In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 3  0 Panda # Panda #version version

U-Boot 2013.04 (May 24 2013 - 14:00:03) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.1-5ubuntu1~ppa1) 4.7.1 GNU ld (GNU Binutils for Ubuntu) 2.22.52.20120713 Panda # setenv usbethaddr 2e:40:70:f0:12:07 setenv usbethaddr 2e:40:70:f0:12:07 Panda # setenv preboot usb start setenv preboot usb start Panda # setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff Panda # setenv bootargs console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 Panda # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' Panda # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Panda # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.157 Panda # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Panda # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Panda # tftp 0x82000000 192.168.1.2:tmp/4460panda-es-RLKupu/zImage tftp 0x82000000 192.168.1.2:tmp/4460panda-es-RLKupu/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-RLKupu/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ############################################### 397.5 KiB/s done Bytes transferred = 4500504 (44ac18 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 118.2 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-RLKupu/omap4-panda-es.dtb tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-RLKupu/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-RLKupu/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *