Tree/Branch: mainline Git describe: v3.15-8556-gdfb9454 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y qcom-apq8074-dragonboard: FAIL: arm-qcom_defconfig exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig
Offline boards (unable to connect to serial console) ==================================================== omap5-uevm: OFFLINE: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y omap5-uevm: OFFLINE: arm-multi_v7_defconfig
Full Report ===========
arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 16.9 sec: PASS da850-evm 0 min 14.8 sec: PASS
arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.4 sec: PASS tegra30-beaver 0 min 17.4 sec: PASS
arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS omap5-uevm 0 min 31.4 sec: OFFLINE sun7i-a20-cubieboard2 0 min 12.9 sec: PASS
arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.5 sec: FAIL armada-370-mirabox 0 min 21.6 sec: PASS
arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.4 sec: PASS am335x-boneblack 0 min 22.4 sec: PASS omap3-beagle-xm 0 min 46.7 sec: PASS legacy,3530beagle 0 min 23.7 sec: PASS (Warnings: 1) omap4-panda 0 min 57.3 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 22.8 sec: PASS am335x-bone 0 min 24.2 sec: PASS omap3-overo-storm-tobi 0 min 29.2 sec: PASS omap5-uevm 0 min 58.7 sec: PASS (Warnings: 1) omap3-n900 0 min 16.3 sec: PASS legacy,n900 0 min 17.3 sec: PASS (Warnings: 1) omap4-panda-es 0 min 53.0 sec: PASS (Warnings: 1) legacy,3730storm 0 min 22.6 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1)
arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.1 sec: PASS am335x-boneblack 0 min 22.1 sec: PASS sun7i-a20-cubieboard2 0 min 12.9 sec: PASS sun4i-a10-cubieboard 0 min 17.6 sec: PASS exynos5410-smdk5410 0 min 28.7 sec: PASS am335x-bone 0 min 23.6 sec: PASS tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 51.2 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.2 sec: PASS ste-snowball 1 min 11.4 sec: PASS tegra30-beaver 0 min 20.4 sec: PASS omap3-n900 0 min 15.3 sec: PASS qcom-apq8074-dragonboard 0 min 18.2 sec: PASS bcm28155-ap 0 min 25.4 sec: PASS omap3-overo-tobi 0 min 22.0 sec: PASS omap3-overo-storm-tobi 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 48.0 sec: PASS exynos5420-arndale-octa 0 min 40.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.9 sec: PASS omap5-uevm 0 min 31.4 sec: OFFLINE omap4-panda-es 0 min 49.5 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 35.3 sec: PASS
arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.5 sec: PASS sun4i-a10-cubieboard 0 min 11.6 sec: PASS
arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.1 sec: FAIL
arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.8 sec: PASS
arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 38.3 sec: FAIL exynos5250-arndale 0 min 29.8 sec: PASS exynos5410-smdk5410 0 min 27.1 sec: PASS
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.7 sec: PASS imx6q-wandboard 0 min 13.9 sec: PASS
arm-u8500_defconfig ------------------- ste-snowball 1 min 53.4 sec: FAIL
arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.6 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS
Console logs for failures =========================
arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ----------------------------------------------
armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------
3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 55048012 02109471 [<c0186d98>] (_set_bit) from [<c01c9e20>] (n_tty_set_termios+0x234/0x348) [<c01c9e20>] (n_tty_set_termios) from [<c01ca020>] (n_tty_open+0xec/0x114) [<c01ca020>] (n_tty_open) from [<c01cda7c>] (tty_ldisc_open+0x3c/0x78) [<c01cda7c>] (tty_ldisc_open) from [<c01ce1f8>] (tty_ldisc_setup+0x18/0x5c) [<c01ce1f8>] (tty_ldisc_setup) from [<c01c6e6c>] (tty_init_dev+0x94/0x184) [<c01c6e6c>] (tty_init_dev) from [<c01c7778>] (tty_open+0x2d0/0x5a8) [<c01c7778>] (tty_open) from [<c00ae758>] (chrdev_open+0xc4/0x184) [<c00ae758>] (chrdev_open) from [<c00a91d8>] (do_dentry_open.isra.12+0x1b0/0x270) [<c00a91d8>] (do_dentry_open.isra.12) from [<c00a9368>] (finish_open+0x20/0x38) [<c00a9368>] (finish_open) from [<c00b7404>] (do_last.isra.41+0x5a4/0xb50) [<c00b7404>] (do_last.isra.41) from [<c00b7a64>] (path_openat+0xb4/0x5c8) [<c00b7a64>] (path_openat) from [<c00b827c>] (do_filp_open+0x2c/0x80) [<c00b827c>] (do_filp_open) from [<c00aa2c0>] (do_sys_open+0x110/0x1cc) [<c00aa2c0>] (do_sys_open) from [<c0587c0c>] (kernel_init_freeable+0x128/0x1c8) [<c0587c0c>] (kernel_init_freeable) from [<c0424908>] (kernel_init+0x8/0xec) [<c0424908>] (kernel_init) from [<c000e638>] (ret_from_fork+0x14/0x3c) Code: 00f091f5 1233a0e1 9f2f91e1 032082e1 (920f81e1) ---[ end trace 0bfb704541ec2fee ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.15.0-08556-gdfb9454 #1 [<c0014b04>] (unwind_backtrace) from [<c0010eb0>] (show_stack+0x10/0x14) [<c0010eb0>] (show_stack) from [<c04279c8>] (dump_stack+0x74/0x90) [<c04279c8>] (dump_stack) from [<c00139dc>] (handle_IPI+0x134/0x170) [<c00139dc>] (handle_IPI) from [<c0008650>] (armada_370_xp_handle_irq+0xb0/0xcc) [<c0008650>] (armada_370_xp_handle_irq) from [<c0011980>] (__irq_svc+0x40/0x50) Exception stack(0xed87dfa0 to 0xed87dfe8) dfa0: edfd53d8 00000000 00000c90 00000000 ed87c000 c05c649c ed87c000 c042ed74 dfc0: c05fb0d5 00000001 c05fb0d5 ed87c000 00000000 ed87dfe8 c000f168 c004eb90 dfe0: 60000313 ffffffff [<c0011980>] (__irq_svc) from [<c004eb90>] (cpu_startup_entry+0xec/0x144) [<c004eb90>] (cpu_startup_entry) from [<00008768>] (0x8768) ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 23.53 seconds. # PYBOOT: Result: FAIL
arm-qcom_defconfig ------------------
qcom-apq8074-dragonboard: FAIL: last 40 lines of boot log: ----------------------------------------------------------
[ 1.514671] 7fc0: c06da8ec c09b7bbc 00000020 ee097fe0 c020fc90 c020fc94 60000013 ffffffff [ 1.522839] [<c06d20c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.530997] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.538460] [<c025866c>] (cpu_startup_entry) from [<00208624>] (0x208624) [ 1.546526] CPU3: stopping [ 1.553380] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.15.0-08556-gdfb9454 #1 [ 1.556007] [<c0214b74>] (unwind_backtrace) from [<c02122b8>] (show_stack+0x10/0x14) [ 1.564251] [<c02122b8>] (show_stack) from [<c06ccd84>] (dump_stack+0x70/0xbc) [ 1.572142] [<c06ccd84>] (dump_stack) from [<c0213cd0>] (handle_IPI+0x154/0x188) [ 1.579171] [<c0213cd0>] (handle_IPI) from [<c0208588>] (gic_handle_irq+0x58/0x60) [ 1.586724] [<c0208588>] (gic_handle_irq) from [<c06d20c0>] (__irq_svc+0x40/0x70) [ 1.594093] Exception stack(0xee099f98 to 0xee099fe0) [ 1.601644] 9f80: 00000003 c085507c [ 1.606687] 9fa0: 00000048 00000000 ee098000 ee098000 ee098000 c09b7bbc c097646c 512f06f0 [ 1.614846] 9fc0: c06da8ec c09b7bbc 00000020 ee099fe0 c020fc90 c020fc94 60000013 ffffffff [ 1.623012] [<c06d20c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.631172] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.638633] [<c025866c>] (cpu_startup_entry) from [<00208624>] (0x208624) [ 1.646697] CPU0: stopping [ 1.653551] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.15.0-08556-gdfb9454 #1 [ 1.656172] [<c0214b74>] (unwind_backtrace) from [<c02122b8>] (show_stack+0x10/0x14) [ 1.664415] [<c02122b8>] (show_stack) from [<c06ccd84>] (dump_stack+0x70/0xbc) [ 1.672310] [<c06ccd84>] (dump_stack) from [<c0213cd0>] (handle_IPI+0x154/0x188) [ 1.679340] [<c0213cd0>] (handle_IPI) from [<c0208588>] (gic_handle_irq+0x58/0x60) [ 1.686893] [<c0208588>] (gic_handle_irq) from [<c06d20c0>] (__irq_svc+0x40/0x70) [ 1.694263] Exception stack(0xc096ff60 to 0xc096ffa8) [ 1.701817] ff60: 00000000 c085507c 000001ec 00000000 c096e000 c096e000 c096e000 c09b7bbc [ 1.706854] ff80: c097646c 512f06f0 c06da8ec c09b7bbc 00000000 c096ffa8 c020fc90 c020fc94 [ 1.715012] ffa0: 60000113 ffffffff [ 1.723174] [<c06d20c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.726477] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.734115] [<c025866c>] (cpu_startup_entry) from [<c0920aa8>] (start_kernel+0x2e8/0x344) [ 1.742187] [<c0920aa8>] (start_kernel) from [<00208074>] (0x208074) [ 1.750434] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.750434] ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000
# PYBOOT: Time: 16.12 seconds. # PYBOOT: Result: FAIL
arm-exynos_defconfig --------------------
exynos5420-arndale-octa: FAIL: last 40 lines of boot log: ---------------------------------------------------------
Hi Kevin,
On Wed, Jun 11, 2014 at 10:59 AM, Kevin's boot bot khilman@linaro.org wrote:
Tree/Branch: mainline Git describe: v3.15-8556-gdfb9454 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y qcom-apq8074-dragonboard: FAIL: arm-qcom_defconfig exynos5420-arndale-octa: FAIL: arm-exynos_defconfig
I do not see any failure with this board with the kernel described above with exynos_defconfig. What exactly is the error that you see or have you enabled anything extra in the config?
On Tue, Jun 10, 2014 at 11:19 PM, Sachin Kamat spk.linux@gmail.com wrote:
Hi Kevin,
On Wed, Jun 11, 2014 at 10:59 AM, Kevin's boot bot khilman@linaro.org wrote:
Tree/Branch: mainline Git describe: v3.15-8556-gdfb9454 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y qcom-apq8074-dragonboard: FAIL: arm-qcom_defconfig exynos5420-arndale-octa: FAIL: arm-exynos_defconfig
I do not see any failure with this board with the kernel described above with exynos_defconfig. What exactly is the error that you see or have you enabled anything extra in the config?
There is nothing extra enabled in the defconfig.
This failure has been puzzling me a bit because I've seen it a few times in my mainline tests over the last couple weeks, but cannot reproduce it when I try manually.
I'll keep a closer watch on this and get you the detailed boot log when it fails again.
Kevin
On Wed, Jun 11, 2014 at 9:11 AM, Kevin Hilman khilman@linaro.org wrote:
On Tue, Jun 10, 2014 at 11:19 PM, Sachin Kamat spk.linux@gmail.com wrote:
Hi Kevin,
On Wed, Jun 11, 2014 at 10:59 AM, Kevin's boot bot khilman@linaro.org wrote:
Tree/Branch: mainline Git describe: v3.15-8556-gdfb9454 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y qcom-apq8074-dragonboard: FAIL: arm-qcom_defconfig exynos5420-arndale-octa: FAIL: arm-exynos_defconfig
I do not see any failure with this board with the kernel described above with exynos_defconfig. What exactly is the error that you see or have you enabled anything extra in the config?
There is nothing extra enabled in the defconfig.
This failure has been puzzling me a bit because I've seen it a few times in my mainline tests over the last couple weeks, but cannot reproduce it when I try manually.
I'll keep a closer watch on this and get you the detailed boot log when it fails again.
Here's a failure log.
Kevin
Hi Sachin,
On Wed, Jun 11, 2014 at 11:30 AM, Kevin Hilman khilman@linaro.org wrote:
On Wed, Jun 11, 2014 at 9:11 AM, Kevin Hilman khilman@linaro.org wrote:
On Tue, Jun 10, 2014 at 11:19 PM, Sachin Kamat spk.linux@gmail.com wrote:
Hi Kevin,
On Wed, Jun 11, 2014 at 10:59 AM, Kevin's boot bot khilman@linaro.org wrote:
Tree/Branch: mainline Git describe: v3.15-8556-gdfb9454 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y qcom-apq8074-dragonboard: FAIL: arm-qcom_defconfig exynos5420-arndale-octa: FAIL: arm-exynos_defconfig
I do not see any failure with this board with the kernel described above with exynos_defconfig. What exactly is the error that you see or have you enabled anything extra in the config?
There is nothing extra enabled in the defconfig.
This failure has been puzzling me a bit because I've seen it a few times in my mainline tests over the last couple weeks, but cannot reproduce it when I try manually.
I'll keep a closer watch on this and get you the detailed boot log when it fails again.
Here's a failure log.
OK, so I think I figured out why this was failing.
The power cable between the USB controlled relay I use to power the board, and the board itself had the ground wire just floating. I must've bumped it lose when adding another board. That explains the somewhat random failures, and I haven't seen any failures since fixing the cable. I'll keep an eye on it though.
Thanks,
Kevin
Hi Kevin,
On Thu, Jun 12, 2014 at 6:11 AM, Kevin Hilman khilman@linaro.org wrote:
Hi Sachin,
On Wed, Jun 11, 2014 at 11:30 AM, Kevin Hilman khilman@linaro.org wrote:
On Wed, Jun 11, 2014 at 9:11 AM, Kevin Hilman khilman@linaro.org wrote:
On Tue, Jun 10, 2014 at 11:19 PM, Sachin Kamat spk.linux@gmail.com wrote:
Hi Kevin,
On Wed, Jun 11, 2014 at 10:59 AM, Kevin's boot bot khilman@linaro.org wrote:
Tree/Branch: mainline Git describe: v3.15-8556-gdfb9454 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y qcom-apq8074-dragonboard: FAIL: arm-qcom_defconfig exynos5420-arndale-octa: FAIL: arm-exynos_defconfig
I do not see any failure with this board with the kernel described above with exynos_defconfig. What exactly is the error that you see or have you enabled anything extra in the config?
There is nothing extra enabled in the defconfig.
This failure has been puzzling me a bit because I've seen it a few times in my mainline tests over the last couple weeks, but cannot reproduce it when I try manually.
I'll keep a closer watch on this and get you the detailed boot log when it fails again.
Here's a failure log.
OK, so I think I figured out why this was failing.
The power cable between the USB controlled relay I use to power the board, and the board itself had the ground wire just floating. I must've bumped it lose when adding another board. That explains the somewhat random failures, and I haven't seen any failures since fixing the cable.
Thanks for the confirmation.
I'll keep an eye on it though.
Sure.
linaro-kernel@lists.linaro.org
-
Kevin Hilman -
Kevin's boot bot
-
Sachin Kamat