Am 15.09.2014 um 15:26 schrieb Michal Simek:

On 09/06/2014 01:40 PM, Mark Brown wrote:

...

There is an ISL9305 regulator on the Parallella board, add it to the DT along with descriptions of all the supplies.

Signed-off-by: Mark Brown broonie@kernel.org

arch/arm/boot/dts/zynq-parallella.dts | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)

diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index 41afd9da6876..43ca89fb92e4 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -53,6 +53,29 @@ &i2c0 { status = "okay";

• isl9305: isl9305@68 {

• compatible = "isl,isl9305";
  

• reg = <0x68>;
  

• regulators {
  

• 	dcd1 {
  

• 		regulator-name = "VDD_DSP";
  

• 		regulator-always-on;
  

• 	};
  

• 	dcd2 {
  

• 		regulator-name = "1P35V";
  

• 		regulator-always-on;
  

• 	};
  

• 	ldo1 {
  

• 		regulator-name = "VDD_ADJ";
  

• 	};
  

• 	ldo2 {
  

• 		regulator-name = "VDD_GPIO";
  

• 		regulator-always-on;
  

• 	};
  

• };
  

• };

}; &sdhci1 {

Applied.

Where exactly on the board did you spot that regulator? I did not spot it on my pre-ordered board and wonder whether it might be a difference of the revised RS-distributed board with the large heat sink?

Thanks, Andreas