Suspend scenario in case of ohci bus glue was not properly handled as it was not suspending generic part of ohci controller. Calling explicitly the ohci_suspend()routine will ensure proper handling of suspend scenario.
V2: -Incase ohci_suspend() fails, return right away without executing further.
V3: -New patch 1/11 added, for generic ohci-hcd suspend code.
V4: -Properly aligned "do_wakeup" and "ret" variables.
Manjunath Goudar (11): USB: OHCI: Properly handle OHCI controller suspend USB: OHCI: Properly handle ohci-at91 suspend USB: OHCI: Properly handle ohci-s3c2410 suspend USB: OHCI: Properly handle ohci-da8xx suspend USB: OHCI: Properly handle ohci-ep93xx suspend USB: OHCI: Properly handle ohci-exynos suspend USB: OHCI: Properly handle ohci-omap suspend USB: OHCI: Properly handle ohci-platform suspend USB: OHCI: Properly handle ohci-pxa27x suspend USB: OHCI: Properly handle ohci-sm501 suspend USB: OHCI: Properly handle ohci-spear suspend
drivers/usb/host/ohci-at91.c | 10 ++++++++-- drivers/usb/host/ohci-da8xx.c | 15 +++++++++++---- drivers/usb/host/ohci-ep93xx.c | 9 ++++++++- drivers/usb/host/ohci-exynos.c | 20 +++++--------------- drivers/usb/host/ohci-hcd.c | 9 ++++++++- drivers/usb/host/ohci-omap.c | 13 ++++++++++--- drivers/usb/host/ohci-platform.c | 9 ++++++++- drivers/usb/host/ohci-pxa27x.c | 8 +++++++- drivers/usb/host/ohci-s3c2410.c | 19 ++++--------------- drivers/usb/host/ohci-sm501.c | 11 +++++++++-- drivers/usb/host/ohci-spear.c | 12 +++++++++--- 11 files changed, 87 insertions(+), 48 deletions(-)
Suspend scenario in case of OHCI was not properly handled in ochi_suspend()routine. This does proper handling of suspend scenario.
Signed-off-by: Manjunath Goudar manjunath.goudar@linaro.org Cc: Arnd Bergmann arnd@arndb.de Cc: Alan Stern stern@rowland.harvard.edu Cc: Greg KH greg@kroah.com Cc: linux-usb@vger.kernel.org
V3: New patch.
V4: No change. --- drivers/usb/host/ohci-hcd.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index b69a49e..f3dcaa2 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1034,6 +1034,7 @@ int ohci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); unsigned long flags; + int rc = 0;
/* Disable irq emission and mark HW unaccessible. Use * the spinlock to properly synchronize with possible pending @@ -1046,7 +1047,13 @@ int ohci_suspend(struct usb_hcd *hcd, bool do_wakeup) clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); spin_unlock_irqrestore (&ohci->lock, flags);
- return 0; + synchronize_irq(hcd->irq); + + if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) { + ohci_resume(hcd, false); + rc = -EBUSY; + } + return rc; } EXPORT_SYMBOL_GPL(ohci_suspend);
Suspend scenario in case of ohci-at91 glue was not properly handled as it was not suspending generic part of ohci controller. Calling explicitly the ohci_suspend() routine in ohci_hcd_at91_drv_suspend() will ensure proper handling of suspend scenario.
Signed-off-by: Manjunath Goudar manjunath.goudar@linaro.org Acked-by: Alan Stern stern@rowland.harvard.edu Cc: Arnd Bergmann arnd@arndb.de Cc: Greg KH greg@kroah.com Cc: linux-usb@vger.kernel.org
V2: -Incase ohci_suspend() fails, return right away without executing further.
V3: -Aligned variable "do_wakeup" and "ret".
V4: - No change. --- drivers/usb/host/ohci-at91.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index fb2f127..e34baa6 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -619,8 +619,14 @@ ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg) { struct usb_hcd *hcd = platform_get_drvdata(pdev); struct ohci_hcd *ohci = hcd_to_ohci(hcd); + bool do_wakeup = device_may_wakeup(&pdev->dev); + int ret;
- if (device_may_wakeup(&pdev->dev)) + ret = ohci_suspend(hcd, do_wakeup); + if (ret) + return ret; + + if (do_wakeup) enable_irq_wake(hcd->irq);
/* @@ -637,7 +643,7 @@ ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg) at91_stop_clock(); }
- return 0; + return ret; }
static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
Suspend scenario in case of ohci-s3c2410 glue was not properly handled as it was not suspending generic part of ohci controller. Calling explicitly the ohci_suspend() routine in ohci_hcd_s3c2410_drv_suspend() will ensure proper handling of suspend scenario.
Signed-off-by: Manjunath Goudar manjunath.goudar@linaro.org Cc: Arnd Bergmann arnd@arndb.de Cc: Alan Stern stern@rowland.harvard.edu Cc: Greg KH greg@kroah.com Cc: linux-usb@vger.kernel.org
V2: -Incase ohci_suspend() fails, return right away without executing further. V3: -rid of unwanted code from ohci_hcd_s3c2410_drv_suspend() which already ohci_suspend() does it.
V4: -The do_wakeup variable alignment is removed. --- drivers/usb/host/ohci-s3c2410.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 8018bb1..4ccf156 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -428,26 +428,15 @@ static int ohci_hcd_s3c2410_drv_suspend(struct device *dev) struct usb_hcd *hcd = dev_get_drvdata(dev); struct ohci_hcd *ohci = hcd_to_ohci(hcd); struct platform_device *pdev = to_platform_device(dev); + bool do_wakeup = device_may_wakeup(dev); unsigned long flags; int rc = 0;
- /* - * Root hub was already suspended. Disable irq emission and - * mark HW unaccessible, bail out if RH has been resumed. Use - * the spinlock to properly synchronize with possible pending - * RH suspend or resume activity. - */ - spin_lock_irqsave(&ohci->lock, flags); - if (ohci->rh_state != OHCI_RH_SUSPENDED) { - rc = -EINVAL; - goto bail; - } - - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + rc = ohci_suspend(hcd, do_wakeup); + if (rc) + return rc;
s3c2410_stop_hc(pdev); -bail: - spin_unlock_irqrestore(&ohci->lock, flags);
return rc; }
Suspend scenario in case of ohci-da8xx glue was not properly handled as it was not suspending generic part of ohci controller. Calling explicitly the ohci_suspend() routine in ohci_da8xx_suspend() will ensure proper handling of suspend scenario.
Signed-off-by: Manjunath Goudar manjunath.goudar@linaro.org Cc: Arnd Bergmann arnd@arndb.de Cc: Alan Stern stern@rowland.harvard.edu Cc: Greg KH greg@kroah.com Cc: linux-usb@vger.kernel.org
V2: -Incase ohci_suspend() fails, return right away without executing further.
V3: -Aligned variable "do_wakeup" and "ret". -pdev->dev.power.power_state stuff has been removed.
V4: -Properly aligned "do_wakeup" and "ret" variable. --- drivers/usb/host/ohci-da8xx.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index 6aaa9c9..44893cf 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -406,19 +406,26 @@ static int ohci_hcd_da8xx_drv_remove(struct platform_device *dev) }
#ifdef CONFIG_PM -static int ohci_da8xx_suspend(struct platform_device *dev, pm_message_t message) +static int ohci_da8xx_suspend(struct platform_device *pdev, + pm_message_t message) { - struct usb_hcd *hcd = platform_get_drvdata(dev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); struct ohci_hcd *ohci = hcd_to_ohci(hcd); + bool do_wakeup = device_may_wakeup(&pdev->dev); + int ret;
if (time_before(jiffies, ohci->next_statechange)) msleep(5); ohci->next_statechange = jiffies;
+ ret = ohci_suspend(hcd, do_wakeup); + if (ret) + return ret; + ohci_da8xx_clock(0); hcd->state = HC_STATE_SUSPENDED; - dev->dev.power.power_state = PMSG_SUSPEND; - return 0; + + return ret; }
static int ohci_da8xx_resume(struct platform_device *dev)
Hello.
On 20-06-2013 13:36, Manjunath Goudar wrote:
Suspend scenario in case of ohci-da8xx glue was not properly handled as it was not suspending generic part of ohci controller. Calling explicitly the ohci_suspend() routine in ohci_da8xx_suspend() will ensure proper handling of suspend scenario.
Signed-off-by: Manjunath Goudar manjunath.goudar@linaro.org Cc: Arnd Bergmann arnd@arndb.de Cc: Alan Stern stern@rowland.harvard.edu Cc: Greg KH greg@kroah.com Cc: linux-usb@vger.kernel.org
V2: -Incase ohci_suspend() fails, return right away without executing further.
V3: -Aligned variable "do_wakeup" and "ret". -pdev->dev.power.power_state stuff has been removed.
V4:
-Properly aligned "do_wakeup" and "ret" variable.
drivers/usb/host/ohci-da8xx.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index 6aaa9c9..44893cf 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -406,19 +406,26 @@ static int ohci_hcd_da8xx_drv_remove(struct platform_device *dev) }
#ifdef CONFIG_PM -static int ohci_da8xx_suspend(struct platform_device *dev, pm_message_t message) +static int ohci_da8xx_suspend(struct platform_device *pdev,
pm_message_t message)
Could you align this line more, so that it starts under the character after ( in the previous line.
{
- struct usb_hcd *hcd = platform_get_drvdata(dev);
- struct usb_hcd *hcd = platform_get_drvdata(pdev); struct ohci_hcd *ohci = hcd_to_ohci(hcd);
- bool do_wakeup = device_may_wakeup(&pdev->dev);
- int ret;
I wouldn't call this "properly aligned". It need one more tab.
WBR, Sergei
Suspend scenario in case of ohci-ep93xx glue was not properly handled as it was not suspending generic part of ohci controller. Calling explicitly the ohci_suspend() routine in ohci_hcd_ep93xx_drv_suspend() will ensure proper handling of suspend scenario.
Signed-off-by: Manjunath Goudar manjunath.goudar@linaro.org Cc: Arnd Bergmann arnd@arndb.de Cc: Alan Stern stern@rowland.harvard.edu Cc: Greg KH greg@kroah.com Cc: linux-usb@vger.kernel.org
V2: -Incase ohci_suspend() fails, return right away without executing further. V3: -Aligned variable "do_wakeup" and "ret". V4: -The do_wakeup and ret variable alignment is removed. --- drivers/usb/host/ohci-ep93xx.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c index 8704e9f..f0aaa48 100644 --- a/drivers/usb/host/ohci-ep93xx.c +++ b/drivers/usb/host/ohci-ep93xx.c @@ -174,13 +174,20 @@ static int ohci_hcd_ep93xx_drv_suspend(struct platform_device *pdev, pm_message_ { struct usb_hcd *hcd = platform_get_drvdata(pdev); struct ohci_hcd *ohci = hcd_to_ohci(hcd); + bool do_wakeup = device_may_wakeup(&pdev->dev); + int ret;
if (time_before(jiffies, ohci->next_statechange)) msleep(5); ohci->next_statechange = jiffies;
+ ret = ohci_suspend(hcd, do_wakeup); + if (ret) + return ret; + ep93xx_stop_hc(&pdev->dev); - return 0; + + return ret; }
static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev)
Suspend scenario in case of ohci-exynos glue was not properly handled as it was not suspending generic part of ohci controller. Calling explicitly the ohci_suspend() routine in exynos_ohci_suspend() will ensure proper handling of suspend scenario.
Signed-off-by: Manjunath Goudar manjunath.goudar@linaro.org Cc: Arnd Bergmann arnd@arndb.de Cc: Alan Stern stern@rowland.harvard.edu Cc: Greg KH greg@kroah.com Cc: linux-usb@vger.kernel.org
V2: -Incase ohci_suspend() fails, return right away without executing further.
V3: -rid of unwanted code from ohci_hcd_s3c2410_drv_suspend() which already ohci_suspend() does it. -Aligned variable "do_wakeup" and "ret".
V4: -The do_wakeup and rc variable alignment is removed. --- drivers/usb/host/ohci-exynos.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index ae6068d..17de3dd 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -203,24 +203,15 @@ static int exynos_ohci_suspend(struct device *dev) struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); struct ohci_hcd *ohci = hcd_to_ohci(hcd); struct platform_device *pdev = to_platform_device(dev); + bool do_wakeup = device_may_wakeup(dev); unsigned long flags; int rc = 0;
- /* - * Root hub was already suspended. Disable irq emission and - * mark HW unaccessible, bail out if RH has been resumed. Use - * the spinlock to properly synchronize with possible pending - * RH suspend or resume activity. - */ - spin_lock_irqsave(&ohci->lock, flags); - if (ohci->rh_state != OHCI_RH_SUSPENDED && - ohci->rh_state != OHCI_RH_HALTED) { - rc = -EINVAL; - goto fail; - } - - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + rc = ohci_suspend(hcd, do_wakeup); + if (rc) + return rc;
+ spin_lock_irqsave(&ohci->lock, flags); if (exynos_ohci->otg) exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
@@ -228,7 +219,6 @@ static int exynos_ohci_suspend(struct device *dev)
clk_disable_unprepare(exynos_ohci->clk);
-fail: spin_unlock_irqrestore(&ohci->lock, flags);
return rc;
Suspend scenario in case of ohci-omap glue was not properly handled as it was not suspending generic part of ohci controller. Calling explicitly the ohci_suspend() routine in ohci_omap_suspend() will ensure proper handling of suspend scenario.
Signed-off-by: Manjunath Goudar manjunath.goudar@linaro.org Cc: Arnd Bergmann arnd@arndb.de Cc: Alan Stern stern@rowland.harvard.edu Cc: Greg KH greg@kroah.com Cc: linux-usb@vger.kernel.org
V2: -Incase ohci_suspend() fails, return right away without executing further.
V3: -Aligned variable "do_wakeup" and "ret".
V4: -The do_wakeup and ret variable alignment is removed. --- drivers/usb/host/ohci-omap.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 10ba58d..baefc46 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -432,16 +432,23 @@ static int ohci_hcd_omap_drv_remove(struct platform_device *dev)
#ifdef CONFIG_PM
-static int ohci_omap_suspend(struct platform_device *dev, pm_message_t message) +static int ohci_omap_suspend(struct platform_device *pdev, pm_message_t message) { - struct ohci_hcd *ohci = hcd_to_ohci(platform_get_drvdata(dev)); + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + bool do_wakeup = device_may_wakeup(&pdev->dev); + int ret;
if (time_before(jiffies, ohci->next_statechange)) msleep(5); ohci->next_statechange = jiffies;
+ ret = ohci_suspend(hcd, do_wakeup); + if (ret) + return ret; + omap_ohci_clock_power(0); - return 0; + return ret; }
static int ohci_omap_resume(struct platform_device *dev)
Suspend scenario in case of ohci-platform glue was not properly handled as it was not suspending generic part of ohci controller. Calling explicitly the ohci_suspend() routine in ohci_platform_suspend() will ensure proper handling of suspend scenario.
Signed-off-by: Manjunath Goudar manjunath.goudar@linaro.org Cc: Arnd Bergmann arnd@arndb.de Cc: Alan Stern stern@rowland.harvard.edu Cc: Greg KH greg@kroah.com Cc: linux-usb@vger.kernel.org
V2: -Incase ohci_suspend() fails, return right away without executing further.
V3: -Aligned variable "do_wakeup" and "ret".
V4: -The do_wakeup and ret variable alignment is removed. --- drivers/usb/host/ohci-platform.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index bc30475..b4a8784 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -139,14 +139,21 @@ static int ohci_platform_remove(struct platform_device *dev)
static int ohci_platform_suspend(struct device *dev) { + struct usb_hcd *hcd = dev_get_drvdata(dev); struct usb_ohci_pdata *pdata = dev->platform_data; struct platform_device *pdev = container_of(dev, struct platform_device, dev); + bool do_wakeup = device_may_wakeup(dev); + int ret; + + ret = ohci_suspend(hcd, do_wakeup); + if (ret) + return ret;
if (pdata->power_suspend) pdata->power_suspend(pdev);
- return 0; + return ret; }
static int ohci_platform_resume(struct device *dev)
Suspend scenario in case of ohci-pxa27x glue was not properly handled as it was not suspending generic part of ohci controller. Calling explicitly the ohci_suspend() routine in ohci_hcd_pxa27x_drv_suspend() will ensure proper handling of suspend scenario.
Signed-off-by: Manjunath Goudar manjunath.goudar@linaro.org Cc: Arnd Bergmann arnd@arndb.de Cc: Alan Stern stern@rowland.harvard.edu Cc: Greg KH greg@kroah.com Cc: linux-usb@vger.kernel.org
V2: -Incase ohci_suspend() fails, return right away without executing further. V3: -Aligned variable "do_wakeup" and "ret".
V4: -The do_wakeup and ret variable alignment is removed. --- drivers/usb/host/ohci-pxa27x.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 3a9c01d..5fb91f1 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -564,13 +564,19 @@ static int ohci_hcd_pxa27x_drv_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); + bool do_wakeup = device_may_wakeup(dev); + int ret;
if (time_before(jiffies, ohci->ohci.next_statechange)) msleep(5); ohci->ohci.next_statechange = jiffies;
+ ret = ohci_suspend(hcd, do_wakeup); + if (ret) + return ret; + pxa27x_stop_hc(ohci, dev); - return 0; + return ret; }
static int ohci_hcd_pxa27x_drv_resume(struct device *dev)
Suspend scenario in case of ohci-sm501 glue was not properly handled as it was not suspending generic part of ohci controller. Calling explicitly the ohci_suspend() routine in ohci_sm501_suspend() will ensure proper handling of suspend scenario.
Signed-off-by: Manjunath Goudar manjunath.goudar@linaro.org Cc: Arnd Bergmann arnd@arndb.de Cc: Alan Stern stern@rowland.harvard.edu Cc: Greg KH greg@kroah.com Cc: linux-usb@vger.kernel.org
V2: -Incase ohci_suspend() fails, return right away without executing further. V3: -Aligned variable "do_wakeup" and "ret".
V4: -The do_wakeup and ret variable alignment is removed. --- drivers/usb/host/ohci-sm501.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c index d479d5d..2a5de5f 100644 --- a/drivers/usb/host/ohci-sm501.c +++ b/drivers/usb/host/ohci-sm501.c @@ -216,14 +216,21 @@ static int ohci_hcd_sm501_drv_remove(struct platform_device *pdev) static int ohci_sm501_suspend(struct platform_device *pdev, pm_message_t msg) { struct device *dev = &pdev->dev; - struct ohci_hcd *ohci = hcd_to_ohci(platform_get_drvdata(pdev)); + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + bool do_wakeup = device_may_wakeup(dev); + int ret;
if (time_before(jiffies, ohci->next_statechange)) msleep(5); ohci->next_statechange = jiffies;
+ ret = ohci_suspend(hcd, do_wakeup); + if (ret) + return ret; + sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 0); - return 0; + return ret; }
static int ohci_sm501_resume(struct platform_device *pdev)
Suspend scenario in case of ohci-spear glue was not properly handled as it was not suspending generic part of ohci controller. Calling explicitly the ohci_suspend() routine in spear_ohci_hcd_drv_suspend() will ensure proper handling of suspend scenario.
Signed-off-by: Manjunath Goudar manjunath.goudar@linaro.org Cc: Arnd Bergmann arnd@arndb.de Cc: Alan Stern stern@rowland.harvard.edu Cc: Greg KH greg@kroah.com Cc: linux-usb@vger.kernel.org
V2: -Incase ohci_suspend() fails, return right away without executing further. V3: -Aligned variable "do_wakeup" and "ret".
V4: -The do_wakeup and ret variable alignment is removed. --- drivers/usb/host/ohci-spear.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c index 31ff3fc..41148f8 100644 --- a/drivers/usb/host/ohci-spear.c +++ b/drivers/usb/host/ohci-spear.c @@ -130,20 +130,26 @@ static int spear_ohci_hcd_drv_remove(struct platform_device *pdev) }
#if defined(CONFIG_PM) -static int spear_ohci_hcd_drv_suspend(struct platform_device *dev, +static int spear_ohci_hcd_drv_suspend(struct platform_device *pdev, pm_message_t message) { - struct usb_hcd *hcd = platform_get_drvdata(dev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); struct ohci_hcd *ohci = hcd_to_ohci(hcd); struct spear_ohci *sohci_p = to_spear_ohci(hcd); + bool do_wakeup = device_may_wakeup(&pdev->dev); + int ret;
if (time_before(jiffies, ohci->next_statechange)) msleep(5); ohci->next_statechange = jiffies;
+ ret = ohci_suspend(hcd, do_wakeup); + if (ret) + return ret; + clk_disable_unprepare(sohci_p->clk);
- return 0; + return ret; }
static int spear_ohci_hcd_drv_resume(struct platform_device *dev)
On Thu, 20 Jun 2013, Manjunath Goudar wrote:
Suspend scenario in case of ohci bus glue was not properly handled as it was not suspending generic part of ohci controller. Calling explicitly the ohci_suspend()routine will ensure proper handling of suspend scenario.
V2: -Incase ohci_suspend() fails, return right away without executing further.
V3: -New patch 1/11 added, for generic ohci-hcd suspend code. V4: -Properly aligned "do_wakeup" and "ret" variables.
This whole series looks good now. For all of the patches:
Acked-by: Alan Stern stern@rowland.harvard.edu
linaro-kernel@lists.linaro.org
-
Alan Stern -
Manjunath Goudar -
Sergei Shtylyov