Automated DT boot report for various ARM defconfigs.
Tree/Branch: linus/HEAD Git describe: v3.11-rc7-30-g41615e8 Commit: 41615e811b Merge branch 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard PASS: 0 min 18.1 sec
arm-multi_v7_defconfig ---------------------- omap3-beagle-xm PASS: 0 min 59.6 sec sun4i-a10-cubieboard PASS: 0 min 15.9 sec am335x-bone,am335xboneb PASS: 0 min 34.5 sec am335x-bone,am335xbone PASS: 0 min 36.0 sec omap3-tobi,3530overo PASS: 0 min 22.8 sec omap4-panda PASS: 1 min 3.9 sec imx6dl-wandboard PASS: 0 min 18.4 sec omap4-panda-es PASS: 1 min 0.9 sec omap3-tobi,3730storm PASS: 0 min 22.8 sec omap3-beagle PASS: 1 min 0.5 sec
arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 31.1 sec
arm-omap2plus_defconfig ----------------------- omap3-beagle-xm PASS: 0 min 59.6 sec am335x-bone,am335xboneb FAIL: 0 min 0.0 sec am335x-bone,am335xbone PASS: 0 min 29.1 sec omap3-tobi,3530overo PASS: 0 min 28.0 sec omap4-panda PASS: 1 min 8.8 sec omap4-panda-es PASS: 1 min 4.0 sec omap3-tobi,3730storm PASS: 0 min 24.7 sec omap3-beagle PASS: 0 min 59.5 sec
======================================================================
arm-omap2plus_defconfig -----------------------
am335x-bone,am335xboneb: FAIL: last 24 lines of boot log: ---------------------------------------------------------
arm-angstrom-linux-gnueabi-gcc (Linaro GCC 4.7-2013.02-01) 4.7.3 20130205 (prerelease) GNU ld (GNU Binutils) 2.22 U-Boot# setenv initenv "'if test -n ${loadbootenv}; then if run loadbootenv; then run importbootenv; fi; fi;'" setenv initenv "'if test -n ${loadbootenv}; then if run loadbootenv; then run importbootenv; fi; fi;'" U-Boot# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi reading uEnv.txt 392 bytes read in 7 ms (54.7 KiB/s) Importing environment from mmc ... U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp link up on port 0, speed 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 ~$off # PYBOOT: Exception: u-boot: ERROR: timed-out getting DHCP address. # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL
On 08/30/2013 10:28 AM, Kevin Hilman build bot wrote:
Automated DT boot report for various ARM defconfigs.
Tree/Branch: linus/HEAD Git describe: v3.11-rc7-30-g41615e8 Commit: 41615e811b Merge branch 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
arm-imx_v6_v7_defconfig
imx6dl-wandboard PASS: 0 min 18.1 sec
arm-multi_v7_defconfig
omap3-beagle-xm PASS: 0 min 59.6 sec sun4i-a10-cubieboard PASS: 0 min 15.9 sec am335x-bone,am335xboneb PASS: 0 min 34.5 sec am335x-bone,am335xbone PASS: 0 min 36.0 sec omap3-tobi,3530overo PASS: 0 min 22.8 sec omap4-panda PASS: 1 min 3.9 sec imx6dl-wandboard PASS: 0 min 18.4 sec omap4-panda-es PASS: 1 min 0.9 sec omap3-tobi,3730storm PASS: 0 min 22.8 sec omap3-beagle PASS: 1 min 0.5 sec
arm-exynos_defconfig
exynos5250-arndale PASS: 0 min 31.1 sec
arm-omap2plus_defconfig
omap3-beagle-xm PASS: 0 min 59.6 sec am335x-bone,am335xboneb FAIL: 0 min 0.0 sec am335x-bone,am335xbone PASS: 0 min 29.1 sec omap3-tobi,3530overo PASS: 0 min 28.0 sec omap4-panda PASS: 1 min 8.8 sec omap4-panda-es PASS: 1 min 4.0 sec omap3-tobi,3730storm PASS: 0 min 24.7 sec omap3-beagle PASS: 0 min 59.5 sec
Again, this is really nice!
Just a minor nit, but it might be good to call out the failures at the top, just to make it easier to see what action is needed/who should be involved.
thanks -john
linaro-kernel@lists.linaro.org