Hi All,
This is version 2 of cci big endian fix. Idea of this way of fixing was suggested by Ben Dooks [1]. Compared to previous solution this one does not use ifdefs and looks much cleaner.
This was tested on TC2 both LE and BE, CONFIG_ARM_CCI was enabled.
[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-October/203248.ht...
Thanks, Victor
Victor Kamensky (1): ARM: cci driver need big endian fixes in asm code
drivers/bus/arm-cci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
cci_enable_port_for_self written in asm and it works with h/w registers that are in little endian format. When run in big endian mode it needs byteswaped constants before/after it writes/reads to/from such registers
Signed-off-by: Victor Kamensky victor.kamensky@linaro.org Signed-off-by: Ben Dooks ben.dooks@codethink.co.uk --- drivers/bus/arm-cci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c index 57b0bc6..4328c25 100644 --- a/drivers/bus/arm-cci.c +++ b/drivers/bus/arm-cci.c @@ -872,7 +872,7 @@ asmlinkage void __naked cci_enable_port_for_self(void)
/* Enable the CCI port */ " ldr r0, [r0, %[offsetof_port_phys]] \n" -" mov r3, #"__stringify(CCI_ENABLE_REQ)" \n" +" mov r3, %[cci_enable_req]\n" " str r3, [r0, #"__stringify(CCI_PORT_CTRL)"] \n"
/* poll the status reg for completion */ @@ -880,7 +880,7 @@ asmlinkage void __naked cci_enable_port_for_self(void) " ldr r0, [r1] \n" " ldr r0, [r0, r1] @ cci_ctrl_base \n" "4: ldr r1, [r0, #"__stringify(CCI_CTRL_STATUS)"] \n" -" tst r1, #1 \n" +" tst r1, %[cci_control_status_bits] \n" " bne 4b \n"
" mov r0, #0 \n" @@ -893,6 +893,8 @@ asmlinkage void __naked cci_enable_port_for_self(void) "7: .word cci_ctrl_phys - . \n" : : [sizeof_cpu_port] "i" (sizeof(cpu_port)), + [cci_enable_req] "i" cpu_to_le32(CCI_ENABLE_REQ), + [cci_control_status_bits] "i" cpu_to_le32(1), #ifndef __ARMEB__ [offsetof_cpu_port_mpidr_lsb] "i" (offsetof(struct cpu_port, mpidr)), #else
On Tue, 15 Oct 2013, Victor Kamensky wrote:
cci_enable_port_for_self written in asm and it works with h/w registers that are in little endian format. When run in big endian mode it needs byteswaped constants before/after it writes/reads to/from such registers
Signed-off-by: Victor Kamensky victor.kamensky@linaro.org Signed-off-by: Ben Dooks ben.dooks@codethink.co.uk
Acked-by: Nicolas Pitre nico@linaro.org
drivers/bus/arm-cci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c index 57b0bc6..4328c25 100644 --- a/drivers/bus/arm-cci.c +++ b/drivers/bus/arm-cci.c @@ -872,7 +872,7 @@ asmlinkage void __naked cci_enable_port_for_self(void) /* Enable the CCI port */ " ldr r0, [r0, %[offsetof_port_phys]] \n" -" mov r3, #"__stringify(CCI_ENABLE_REQ)" \n" +" mov r3, %[cci_enable_req]\n" " str r3, [r0, #"__stringify(CCI_PORT_CTRL)"] \n" /* poll the status reg for completion */ @@ -880,7 +880,7 @@ asmlinkage void __naked cci_enable_port_for_self(void) " ldr r0, [r1] \n" " ldr r0, [r0, r1] @ cci_ctrl_base \n" "4: ldr r1, [r0, #"__stringify(CCI_CTRL_STATUS)"] \n" -" tst r1, #1 \n" +" tst r1, %[cci_control_status_bits] \n" " bne 4b \n" " mov r0, #0 \n" @@ -893,6 +893,8 @@ asmlinkage void __naked cci_enable_port_for_self(void) "7: .word cci_ctrl_phys - . \n" : : [sizeof_cpu_port] "i" (sizeof(cpu_port)),
- [cci_enable_req] "i" cpu_to_le32(CCI_ENABLE_REQ),
- [cci_control_status_bits] "i" cpu_to_le32(1),
#ifndef __ARMEB__ [offsetof_cpu_port_mpidr_lsb] "i" (offsetof(struct cpu_port, mpidr)),
#else
1.8.1.4
On 16/10/13 05:50, Victor Kamensky wrote:
cci_enable_port_for_self written in asm and it works with h/w registers that are in little endian format. When run in big endian mode it needs byteswaped constants before/after it writes/reads to/from such registers
Signed-off-by: Victor Kamenskyvictor.kamensky@linaro.org Signed-off-by: Ben Dooksben.dooks@codethink.co.uk
drivers/bus/arm-cci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c index 57b0bc6..4328c25 100644 --- a/drivers/bus/arm-cci.c +++ b/drivers/bus/arm-cci.c @@ -872,7 +872,7 @@ asmlinkage void __naked cci_enable_port_for_self(void)
/* Enable the CCI port */ " ldr r0, [r0, %[offsetof_port_phys]] \n" -" mov r3, #"__stringify(CCI_ENABLE_REQ)" \n" +" mov r3, %[cci_enable_req]\n" " str r3, [r0, #"__stringify(CCI_PORT_CTRL)"] \n"
/* poll the status reg for completion */ @@ -880,7 +880,7 @@ asmlinkage void __naked cci_enable_port_for_self(void) " ldr r0, [r1] \n" " ldr r0, [r0, r1] @ cci_ctrl_base \n" "4: ldr r1, [r0, #"__stringify(CCI_CTRL_STATUS)"] \n" -" tst r1, #1 \n" +" tst r1, %[cci_control_status_bits] \n" " bne 4b \n"
" mov r0, #0 \n" @@ -893,6 +893,8 @@ asmlinkage void __naked cci_enable_port_for_self(void) "7: .word cci_ctrl_phys - . \n" : : [sizeof_cpu_port] "i" (sizeof(cpu_port)),
- [cci_enable_req] "i" cpu_to_le32(CCI_ENABLE_REQ),
- [cci_control_status_bits] "i" cpu_to_le32(1), #ifndef __ARMEB__ [offsetof_cpu_port_mpidr_lsb] "i" (offsetof(struct cpu_port, mpidr)), #else
Thanks
linaro-kernel@lists.linaro.org