Automated DT boot report for various ARM defconfigs.

Tree/Branch: arm-soc Git describe: v3.12-rc4-320-g820c40a Failed boot tests (console logs at the end) =========================================== tegra30-beaver: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: multi_v7_defconfig imx6q-wandboard: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig

Full Report ===========

omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 29.6 sec omap3-beagle-xm PASS: 0 min 52.5 sec am335x-bone PASS: 0 min 26.1 sec omap3-tobi,3530overo PASS: 0 min 21.1 sec omap4-panda PASS: 1 min 4.8 sec omap4-panda-es PASS: 1 min 8.2 sec omap3-tobi,3730storm PASS: 0 min 23.9 sec omap3-beagle PASS: 0 min 51.5 sec

tegra_defconfig --------------- tegra30-beaver PASS: 0 min 22.7 sec

imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.0 sec imx6q-wandboard PASS: 0 min 15.8 sec

mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox PASS: 0 min 19.9 sec

exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.7 sec

multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.2 sec tegra30-beaver FAIL: 0 min 29.8 sec am335x-boneblack PASS: 0 min 34.4 sec omap3-beagle-xm PASS: 0 min 51.8 sec sun7i-a20-cubieboard2 PASS: 0 min 22.4 sec armada-370-mirabox PASS: 0 min 22.9 sec omap4-panda PASS: 1 min 1.6 sec omap4-panda-es PASS: 1 min 7.6 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 30.2 sec sun4i-a10-cubieboard PASS: 0 min 22.8 sec imx6dl-wandboard,wand-solo FAIL: 0 min 21.1 sec omap3-tobi,3530overo PASS: 0 min 19.9 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard FAIL: 0 min 19.8 sec omap3-tobi,3730storm PASS: 0 min 22.3 sec imx6dl-wandboard,wand-dual FAIL: 0 min 21.3 sec omap3-beagle PASS: 0 min 57.7 sec

u8500_defconfig --------------- ste-snowball PASS: 0 min 28.6 sec

sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

Console logs for failures =========================

multi_v7_defconfig ------------------

tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------

Bytes transferred = 20904 (51a8 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000 bootz 0x81000000 0x82000000 0x83000000 Kernel image @ 0x81000000 [ 0x000000 - 0x364fe0 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 830081a7

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.82 seconds. # PYBOOT: Result: FAIL

armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------

Image Name: Linux Created: 2013-10-13 5:18:04 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3572474 Bytes = 3.4 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.20 seconds. # PYBOOT: Result: FAIL

imx6dl-wandboard,wand-solo: FAIL: last 24 lines of boot log: ------------------------------------------------------------

1.5 MiB/s done Bytes transferred = 31043 (7943 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.180:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a942

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.05 seconds. # PYBOOT: Result: FAIL

imx6q-wandboard: FAIL: last 24 lines of boot log: -------------------------------------------------

Bytes transferred = 32682 (7faa hex) =>printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.181:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x364fe0 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100afa9

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.82 seconds. # PYBOOT: Result: FAIL

imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log: ------------------------------------------------------------

1.5 MiB/s done Bytes transferred = 31043 (7943 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.179:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a942

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.32 seconds. # PYBOOT: Result: FAIL