From: Al Stone ahs3@redhat.com
Corrects an obvious typo in the Arndale pinctrl descriptions in DT. The samsung-pinctrl driver uses the correct name.
Signed-off-by: Al Stone al.stone@linaro.org --- arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 44 +++++++++++++++---------------- 1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index 656e381..031e198 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -210,21 +210,21 @@ samsung,pins = "gpa0-2", "gpa0-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
i2c2_bus: i2c2-bus { samsung,pins = "gpa0-6", "gpa0-7"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
i2c2_hs_bus: i2c2-hs-bus { samsung,pins = "gpa0-6", "gpa0-7"; samsung,pin-function = <4>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
uart2_data: uart2-data { @@ -238,21 +238,21 @@ samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
i2c3_bus: i2c3-bus { samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
i2c3_hs_bus: i2c3-hs-bus { samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <4>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
uart3_data: uart3-data { @@ -273,14 +273,14 @@ samsung,pins = "gpa2-0", "gpa2-1"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
i2c5_bus: i2c5-bus { samsung,pins = "gpa2-2", "gpa2-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
spi1_bus: spi1-bus { @@ -376,14 +376,14 @@ samsung,pins = "gpb3-0", "gpb3-1"; samsung,pin-function = <4>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
i2c1_hs_bus: i2c1-hs-bus { samsung,pins = "gpb3-2", "gpb3-3"; samsung,pin-function = <4>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
sd0_clk: sd0-clk { @@ -551,14 +551,14 @@ samsung,pins = "gpd0-2", "gpd0-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
dp_hpd: dp_hpd { samsung,pins = "gpx0-7"; samsung,pin-function = <3>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; };
@@ -650,42 +650,42 @@ "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; samsung,pin-function = <3>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
cam_i2c2_bus: cam-i2c2-bus { samsung,pins = "gpe0-6", "gpe1-0"; samsung,pin-function = <4>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
cam_spi1_bus: cam-spi1-bus { samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3"; samsung,pin-function = <4>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
cam_i2c1_bus: cam-i2c1-bus { samsung,pins = "gpf0-2", "gpf0-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
cam_i2c0_bus: cam-i2c0-bus { samsung,pins = "gpf0-0", "gpf0-1"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
cam_spi0_bus: cam-spi0-bus { samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
cam_bayrgb_bus: cam-bayrgb-bus { @@ -696,7 +696,7 @@ "gpg2-0", "gpg2-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
cam_port_a: cam-port-a { @@ -705,7 +705,7 @@ "gph1-4", "gph1-5", "gph1-6", "gph1-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; };
@@ -757,7 +757,7 @@ "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; };
c2c_txd: c2c-txd { @@ -767,7 +767,7 @@ "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; };
On Saturday, September 07, 2013 5:10 AM, Al Stone wrote:
From: Al Stone ahs3@redhat.com
Corrects an obvious typo in the Arndale pinctrl descriptions in DT. The samsung-pinctrl driver uses the correct name.
Signed-off-by: Al Stone al.stone@linaro.org
CC'ed Kukjin Kim (Samsung-SoC Maintainer)
It looks good. Reviewed-by: Jingoo Han jg1.han@samsung.com
Best regards, Jingoo Han
arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 44 +++++++++++++++---------------- 1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index 656e381..031e198 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -210,21 +210,21 @@ samsung,pins = "gpa0-2", "gpa0-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c2_bus: i2c2-bus { samsung,pins = "gpa0-6", "gpa0-7"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c2_hs_bus: i2c2-hs-bus { samsung,pins = "gpa0-6", "gpa0-7"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
uart2_data: uart2-data {
@@ -238,21 +238,21 @@ samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c3_bus: i2c3-bus { samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c3_hs_bus: i2c3-hs-bus { samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
uart3_data: uart3-data {
@@ -273,14 +273,14 @@ samsung,pins = "gpa2-0", "gpa2-1"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c5_bus: i2c5-bus { samsung,pins = "gpa2-2", "gpa2-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
spi1_bus: spi1-bus {
@@ -376,14 +376,14 @@ samsung,pins = "gpb3-0", "gpb3-1"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c1_hs_bus: i2c1-hs-bus { samsung,pins = "gpb3-2", "gpb3-3"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
sd0_clk: sd0-clk {
@@ -551,14 +551,14 @@ samsung,pins = "gpd0-2", "gpd0-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
dp_hpd: dp_hpd { samsung,pins = "gpx0-7"; samsung,pin-function = <3>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;@@ -650,42 +650,42 @@ "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; samsung,pin-function = <3>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_i2c2_bus: cam-i2c2-bus { samsung,pins = "gpe0-6", "gpe1-0"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_spi1_bus: cam-spi1-bus { samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3"; samsung,pin-function = <4>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_i2c1_bus: cam-i2c1-bus { samsung,pins = "gpf0-2", "gpf0-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_i2c0_bus: cam-i2c0-bus { samsung,pins = "gpf0-0", "gpf0-1"; samsung,pin-function = <2>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_spi0_bus: cam-spi0-bus { samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_bayrgb_bus: cam-bayrgb-bus {
@@ -696,7 +696,7 @@ "gpg2-0", "gpg2-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_port_a: cam-port-a {
@@ -705,7 +705,7 @@ "gph1-4", "gph1-5", "gph1-6", "gph1-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;@@ -757,7 +757,7 @@ "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
c2c_txd: c2c-txd {
@@ -767,7 +767,7 @@ "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;-- 1.8.3.1
Jingoo Han wrote:
On Saturday, September 07, 2013 5:10 AM, Al Stone wrote:
From: Al Stone ahs3@redhat.com
Corrects an obvious typo in the Arndale pinctrl descriptions in DT. The samsung-pinctrl driver uses the correct name.
Signed-off-by: Al Stone al.stone@linaro.org
CC'ed Kukjin Kim (Samsung-SoC Maintainer)
Thanks, Jingoo.
It looks good. Reviewed-by: Jingoo Han jg1.han@samsung.com
Best regards, Jingoo Han
Sigh, maybe we missed the typo :(
Will apply, but I'm not sure we need to send this to the stable. Let me check.
Thanks, Kukjin
arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 44 +++++++++++++++---------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 656e381..031e198 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -210,21 +210,21 @@ samsung,pins = "gpa0-2", "gpa0-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c2_bus: i2c2-bus { samsung,pins = "gpa0-6", "gpa0-7"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c2_hs_bus: i2c2-hs-bus { samsung,pins = "gpa0-6", "gpa0-7"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
uart2_data: uart2-data {
@@ -238,21 +238,21 @@ samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c3_bus: i2c3-bus { samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c3_hs_bus: i2c3-hs-bus { samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
uart3_data: uart3-data {
@@ -273,14 +273,14 @@ samsung,pins = "gpa2-0", "gpa2-1"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c5_bus: i2c5-bus { samsung,pins = "gpa2-2", "gpa2-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
spi1_bus: spi1-bus {
@@ -376,14 +376,14 @@ samsung,pins = "gpb3-0", "gpb3-1"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c1_hs_bus: i2c1-hs-bus { samsung,pins = "gpb3-2", "gpb3-3"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
sd0_clk: sd0-clk {
@@ -551,14 +551,14 @@ samsung,pins = "gpd0-2", "gpd0-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
dp_hpd: dp_hpd { samsung,pins = "gpx0-7"; samsung,pin-function = <3>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;@@ -650,42 +650,42 @@ "gpf1-0", "gpf1-1", "gpf1-2",
"gpf1-3";
samsung,pin-function = <3>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_i2c2_bus: cam-i2c2-bus { samsung,pins = "gpe0-6", "gpe1-0"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_spi1_bus: cam-spi1-bus { samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2",
"gpf0-3";
samsung,pin-function = <4>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_i2c1_bus: cam-i2c1-bus { samsung,pins = "gpf0-2", "gpf0-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_i2c0_bus: cam-i2c0-bus { samsung,pins = "gpf0-0", "gpf0-1"; samsung,pin-function = <2>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_spi0_bus: cam-spi0-bus { samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2",
"gpf1-3";
samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_bayrgb_bus: cam-bayrgb-bus {
@@ -696,7 +696,7 @@ "gpg2-0", "gpg2-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_port_a: cam-port-a {
@@ -705,7 +705,7 @@ "gph1-4", "gph1-5", "gph1-6",
"gph1-7";
samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;@@ -757,7 +757,7 @@ "gpv1-4", "gpv1-5", "gpv1-6",
"gpv1-7";
samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
c2c_txd: c2c-txd {
@@ -767,7 +767,7 @@ "gpv3-4", "gpv3-5", "gpv3-6",
"gpv3-7";
samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;-- 1.8.3.1
Hi Al,
On Friday 06 of September 2013 14:09:52 al.stone@linaro.org wrote:
From: Al Stone ahs3@redhat.com
Corrects an obvious typo in the Arndale pinctrl descriptions in DT. The samsung-pinctrl driver uses the correct name.
Thanks for spotting this. The patch looks good to me, but is it tested on some Exynos 5250 based board?
With this typo activating configuration of these pinctrl groups just kept pin-drv at default value, as set up by bootloader, while after this patch it will be reconfigured with new values.
I'll try to test this patch on an Arndale later today.
Best regards, Tomasz
Signed-off-by: Al Stone al.stone@linaro.org
arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 44 +++++++++++++++---------------- 1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index 656e381..031e198 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -210,21 +210,21 @@ samsung,pins = "gpa0-2", "gpa0-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c2_bus: i2c2-bus { samsung,pins = "gpa0-6", "gpa0-7"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c2_hs_bus: i2c2-hs-bus { samsung,pins = "gpa0-6", "gpa0-7"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
uart2_data: uart2-data {
@@ -238,21 +238,21 @@ samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c3_bus: i2c3-bus { samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c3_hs_bus: i2c3-hs-bus { samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
uart3_data: uart3-data {
@@ -273,14 +273,14 @@ samsung,pins = "gpa2-0", "gpa2-1"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c5_bus: i2c5-bus { samsung,pins = "gpa2-2", "gpa2-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
spi1_bus: spi1-bus {
@@ -376,14 +376,14 @@ samsung,pins = "gpb3-0", "gpb3-1"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c1_hs_bus: i2c1-hs-bus { samsung,pins = "gpb3-2", "gpb3-3"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
sd0_clk: sd0-clk {
@@ -551,14 +551,14 @@ samsung,pins = "gpd0-2", "gpd0-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
dp_hpd: dp_hpd { samsung,pins = "gpx0-7"; samsung,pin-function = <3>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;@@ -650,42 +650,42 @@ "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; samsung,pin-function = <3>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_i2c2_bus: cam-i2c2-bus { samsung,pins = "gpe0-6", "gpe1-0"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_spi1_bus: cam-spi1-bus { samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3"; samsung,pin-function = <4>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_i2c1_bus: cam-i2c1-bus { samsung,pins = "gpf0-2", "gpf0-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_i2c0_bus: cam-i2c0-bus { samsung,pins = "gpf0-0", "gpf0-1"; samsung,pin-function = <2>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_spi0_bus: cam-spi0-bus { samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_bayrgb_bus: cam-bayrgb-bus {
@@ -696,7 +696,7 @@ "gpg2-0", "gpg2-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_port_a: cam-port-a {
@@ -705,7 +705,7 @@ "gph1-4", "gph1-5", "gph1-6", "gph1-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;@@ -757,7 +757,7 @@ "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
c2c_txd: c2c-txd {
@@ -767,7 +767,7 @@ "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;
On 09/09/2013 03:00 AM, Tomasz Figa wrote:
Hi Al,
On Friday 06 of September 2013 14:09:52 al.stone@linaro.org wrote:
From: Al Stone ahs3@redhat.com
Corrects an obvious typo in the Arndale pinctrl descriptions in DT. The samsung-pinctrl driver uses the correct name.Thanks for spotting this. The patch looks good to me, but is it tested on some Exynos 5250 based board?
Only with a simple boot test on an Arndale, and making sure that dtc could actually build the dtb. I did not test the driver code. I did read through the code and it appeared to be doing the right things, based on the content of the DT, but I did not do an active test of that.
With this typo activating configuration of these pinctrl groups just kept pin-drv at default value, as set up by bootloader, while after this patch it will be reconfigured with new values.
I'll try to test this patch on an Arndale later today.
Best regards, Tomasz
Signed-off-by: Al Stone al.stone@linaro.org
arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 44 +++++++++++++++---------------- 1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index 656e381..031e198 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -210,21 +210,21 @@ samsung,pins = "gpa0-2", "gpa0-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c2_bus: i2c2-bus { samsung,pins = "gpa0-6", "gpa0-7"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c2_hs_bus: i2c2-hs-bus { samsung,pins = "gpa0-6", "gpa0-7"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
uart2_data: uart2-data {
@@ -238,21 +238,21 @@ samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c3_bus: i2c3-bus { samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c3_hs_bus: i2c3-hs-bus { samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
uart3_data: uart3-data {
@@ -273,14 +273,14 @@ samsung,pins = "gpa2-0", "gpa2-1"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c5_bus: i2c5-bus { samsung,pins = "gpa2-2", "gpa2-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
spi1_bus: spi1-bus {
@@ -376,14 +376,14 @@ samsung,pins = "gpb3-0", "gpb3-1"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
i2c1_hs_bus: i2c1-hs-bus { samsung,pins = "gpb3-2", "gpb3-3"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
sd0_clk: sd0-clk {
@@ -551,14 +551,14 @@ samsung,pins = "gpd0-2", "gpd0-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
dp_hpd: dp_hpd { samsung,pins = "gpx0-7"; samsung,pin-function = <3>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;@@ -650,42 +650,42 @@ "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; samsung,pin-function = <3>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_i2c2_bus: cam-i2c2-bus { samsung,pins = "gpe0-6", "gpe1-0"; samsung,pin-function = <4>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_spi1_bus: cam-spi1-bus { samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3"; samsung,pin-function = <4>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_i2c1_bus: cam-i2c1-bus { samsung,pins = "gpf0-2", "gpf0-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_i2c0_bus: cam-i2c0-bus { samsung,pins = "gpf0-0", "gpf0-1"; samsung,pin-function = <2>; samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_spi0_bus: cam-spi0-bus { samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_bayrgb_bus: cam-bayrgb-bus {
@@ -696,7 +696,7 @@ "gpg2-0", "gpg2-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
cam_port_a: cam-port-a {
@@ -705,7 +705,7 @@ "gph1-4", "gph1-5", "gph1-6", "gph1-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;@@ -757,7 +757,7 @@ "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;};
c2c_txd: c2c-txd {
@@ -767,7 +767,7 @@ "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
samsung,pin-drv = <0>;
On Monday 09 of September 2013 09:11:11 Al Stone wrote:
On 09/09/2013 03:00 AM, Tomasz Figa wrote:
Hi Al,
On Friday 06 of September 2013 14:09:52 al.stone@linaro.org wrote:
From: Al Stone ahs3@redhat.com
Corrects an obvious typo in the Arndale pinctrl descriptions in DT. The samsung-pinctrl driver uses the correct name.Thanks for spotting this. The patch looks good to me, but is it tested on some Exynos 5250 based board?
Only with a simple boot test on an Arndale, and making sure that dtc could actually build the dtb. I did not test the driver code. I did read through the code and it appeared to be doing the right things, based on the content of the DT, but I did not do an active test of that.
OK. I'm able to do exactly the same testing as you did, so let's say I'm fine with this patch.
Acked-by: Tomasz Figa t.figa@samsung.com
Best regards, Tomasz
linaro-kernel@lists.linaro.org
-
Al Stone -
al.stone＠linaro.org -
Jingoo Han -
Kukjin Kim -
Tomasz Figa