Tree/Branch: next Git describe: next-20140516 Failed boot tests (console logs at the end) =========================================== legacy,dm365evm: FAIL: arm-davinci_all_defconfig da850-evm: FAIL: arm-davinci_all_defconfig tegra124-jetson-tk1: FAIL: arm-tegra_defconfig tegra30-beaver: FAIL: arm-tegra_defconfig sun7i-a20-cubieboard2: OFFLINE: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y sun7i-a20-cubieboard2: FAIL: arm-multi_v7_defconfig sun4i-a10-cubieboard: FAIL: arm-multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: arm-sunxi_defconfig sun4i-a10-cubieboard: FAIL: arm-sunxi_defconfig bcm28155-ap: FAIL: arm-bcm_defconfig

Full Report ===========

arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 16.1 sec: FAIL da850-evm 0 min 14.2 sec: FAIL

arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 59.4 sec: FAIL tegra30-beaver 0 min 41.8 sec: FAIL

arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 37.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.8 sec: PASS omap5-uevm 1 min 36.9 sec: PASS sun7i-a20-cubieboard2 0 min 31.4 sec: OFFLINE

arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 19.0 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.4 sec: PASS imx6q-wandboard 0 min 17.4 sec: PASS

arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 50.4 sec: PASS am335x-boneblack 0 min 25.7 sec: PASS omap3-beagle-xm 1 min 0.9 sec: PASS legacy,3530beagle 0 min 34.4 sec: PASS (Warnings: 1) omap4-panda 1 min 12.2 sec: PASS omap3-overo-tobi 0 min 23.7 sec: PASS (Warnings: 1) am335x-bone 0 min 27.3 sec: PASS omap3-overo-storm-tobi 0 min 25.0 sec: PASS omap5-uevm 1 min 2.7 sec: PASS omap3-n900 0 min 17.6 sec: PASS (Warnings: 1) legacy,n900 0 min 17.0 sec: PASS (Warnings: 1) omap4-panda-es 1 min 8.3 sec: PASS legacy,3730storm 0 min 22.7 sec: PASS legacy,3530overo 0 min 21.0 sec: PASS (Warnings: 1)

arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 17.8 sec: PASS ste-snowball 1 min 19.2 sec: PASS tegra30-beaver 0 min 23.4 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 51.9 sec: PASS sun7i-a20-cubieboard2 0 min 39.8 sec: FAIL armada-370-mirabox 0 min 22.5 sec: PASS omap4-panda 0 min 58.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.3 sec: PASS sun4i-a10-cubieboard 0 min 47.6 sec: FAIL bcm28155-ap 0 min 27.9 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.5 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 21.0 sec: PASS omap5-uevm 1 min 40.2 sec: PASS omap3-n900 0 min 16.4 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.4 sec: PASS omap4-panda-es 0 min 56.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS tegra124-jetson-tk1 0 min 52.2 sec: PASS

arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 39.2 sec: FAIL sun4i-a10-cubieboard 0 min 43.7 sec: FAIL

arm-bcm_defconfig ----------------- bcm28155-ap 0 min 45.0 sec: FAIL

arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.6 sec: PASS exynos5250-arndale 0 min 29.8 sec: PASS

arm-u8500_defconfig ------------------- ste-snowball 0 min 33.8 sec: PASS

arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.6 sec: PASS armada-370-mirabox 0 min 20.5 sec: PASS

arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.1 sec: PASS

Console logs for failures =========================

arm-davinci_all_defconfig -------------------------

legacy,dm365evm: FAIL: last 40 lines of boot log: -------------------------------------------------

[<c021ae68>] (cpdma_ctlr_create) from [<c0218d20>] (davinci_emac_probe+0x31c/0x5dc) r10:c7b144c0 r9:c0435c54 r8:c7b14508 r7:c04338d8 r6:c04338c8 r5:c04359a8 r4:c7b14000 [<c0218a04>] (davinci_emac_probe) from [<c01fcd40>] (platform_drv_probe+0x20/0x50) r10:c783c000 r9:00000000 r8:00000001 r7:c0457b80 r6:00000000 r5:c0457b80 r4:c04338d8 [<c01fcd20>] (platform_drv_probe) from [<c01fb6ec>] (driver_probe_device+0x118/0x240) r5:c0484330 r4:c04338d8 [<c01fb5d4>] (driver_probe_device) from [<c01fb8a8>] (__driver_attach+0x94/0x98) r8:c040c9a4 r7:00000000 r6:c043390c r5:c0457b80 r4:c04338d8 r3:00000000 [<c01fb814>] (__driver_attach) from [<c01f9cc8>] (bus_for_each_dev+0x60/0x90) r6:c01fb814 r5:c0457b80 r4:00000000 r3:00000000 [<c01f9c68>] (bus_for_each_dev) from [<c01fb1dc>] (driver_attach+0x20/0x28) r6:c0456a90 r5:c7bb9660 r4:c0457b80 [<c01fb1bc>] (driver_attach) from [<c01fade4>] (bus_add_driver+0xdc/0x1dc) [<c01fad08>] (bus_add_driver) from [<c01fbf8c>] (driver_register+0x80/0xfc) r7:c03f556c r6:c7b91940 r5:c0428b78 r4:c0457b80 [<c01fbf0c>] (driver_register) from [<c01fcc54>] (__platform_driver_register+0x50/0x64) r5:c0428b78 r4:c0428b78 [<c01fcc04>] (__platform_driver_register) from [<c040c9bc>] (davinci_emac_init+0x18/0x20) [<c040c9a4>] (davinci_emac_init) from [<c0008934>] (do_one_initcall+0x88/0x1e0) [<c00088ac>] (do_one_initcall) from [<c03f5d34>] (kernel_init_freeable+0xf4/0x1bc) r10:0000004f r9:c0415c00 r8:c0415c08 r6:c045f140 r5:00000007 r4:c041cd8c [<c03f5c40>] (kernel_init_freeable) from [<c02f7798>] (kernel_init+0x10/0xf4) r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c02f7788 r4:00000000 [<c02f7788>] (kernel_init) from [<c0009770>] (ret_from_fork+0x14/0x24) r4:00000000 r3:00000000 Code: e5903140 e2802f4f e5801140 e881000c (e5831000) ---[ end trace 82e85ba31d226190 ]--- note: swapper[1] exited with preempt_count 1 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000

# PYBOOT: Time: 16.12 seconds. # PYBOOT: Result: FAIL

da850-evm: FAIL: last 40 lines of boot log: -------------------------------------------

[<c021ae68>] (cpdma_ctlr_create) from [<c0218d20>] (davinci_emac_probe+0x31c/0x5dc) r10:c79614c0 r9:c7831c00 r8:c7961508 r7:c7885610 r6:c7885600 r5:c7b762d0 r4:c7961000 [<c0218a04>] (davinci_emac_probe) from [<c01fcd40>] (platform_drv_probe+0x20/0x50) r10:c783c000 r9:00000000 r8:00000004 r7:c0457b80 r6:00000000 r5:c0457b80 r4:c7885610 [<c01fcd20>] (platform_drv_probe) from [<c01fb6ec>] (driver_probe_device+0x118/0x240) r5:c0484330 r4:c7885610 [<c01fb5d4>] (driver_probe_device) from [<c01fb8a8>] (__driver_attach+0x94/0x98) r8:c040c9a4 r7:00000000 r6:c7885644 r5:c0457b80 r4:c7885610 r3:00000000 [<c01fb814>] (__driver_attach) from [<c01f9cc8>] (bus_for_each_dev+0x60/0x90) r6:c01fb814 r5:c0457b80 r4:00000000 r3:00000000 [<c01f9c68>] (bus_for_each_dev) from [<c01fb1dc>] (driver_attach+0x20/0x28) r6:c0456a90 r5:c7bd8780 r4:c0457b80 [<c01fb1bc>] (driver_attach) from [<c01fade4>] (bus_add_driver+0xdc/0x1dc) [<c01fad08>] (bus_add_driver) from [<c01fbf8c>] (driver_register+0x80/0xfc) r7:c03f556c r6:c7ae9b80 r5:c0428b78 r4:c0457b80 [<c01fbf0c>] (driver_register) from [<c01fcc54>] (__platform_driver_register+0x50/0x64) r5:c0428b78 r4:c0428b78 [<c01fcc04>] (__platform_driver_register) from [<c040c9bc>] (davinci_emac_init+0x18/0x20) [<c040c9a4>] (davinci_emac_init) from [<c0008934>] (do_one_initcall+0x88/0x1e0) [<c00088ac>] (do_one_initcall) from [<c03f5d34>] (kernel_init_freeable+0xf4/0x1bc) r10:0000004f r9:c0415c00 r8:c0415c08 r6:c045f140 r5:00000007 r4:c041cd8c [<c03f5c40>] (kernel_init_freeable) from [<c02f7798>] (kernel_init+0x10/0xf4) r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c02f7788 r4:00000000 [<c02f7788>] (kernel_init) from [<c0009770>] (ret_from_fork+0x14/0x24) r4:00000000 r3:00000000 Code: e5903140 e2802f4f e5801140 e881000c (e5831000) ---[ end trace 8e523f42a65c4a3c ]--- note: swapper[1] exited with preempt_count 1 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000

# PYBOOT: Time: 14.21 seconds. # PYBOOT: Result: FAIL

arm-tegra_defconfig -------------------

tegra124-jetson-tk1: FAIL: last 40 lines of boot log: -----------------------------------------------------

Filename 'buildroot.cpio.gz.uboot'. Load address: 0x83000000 Loading: *############################################ 816.4 KiB/s done Bytes transferred = 642602 (9ce2a hex) Tegra124 (Jetson TK1) # tftp 0x82000000 192.168.1.2:tmp/jetson-lmF48z/tegra124-jetson-tk1.dtb tftp 0x82000000 192.168.1.2:tmp/jetson-lmF48z/tegra124-jetson-tk1.dtb Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.189 Filename 'tmp/jetson-lmF48z/tegra124-jetson-tk1.dtb'. Load address: 0x82000000 Loading: *### 788.1 KiB/s done Bytes transferred = 42784 (a720 hex) Tegra124 (Jetson TK1) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk ip=192.168.1.189:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 Tegra124 (Jetson TK1) # bootz 0x81000000 0x83000000 0x82000000 bootz 0x81000000 0x83000000 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x430d48 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200d71f

Starting kernel ...

Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 59.36 seconds. # PYBOOT: Result: FAIL

tegra30-beaver: FAIL: last 40 lines of boot log: ------------------------------------------------

Filename 'buildroot.cpio.gz.uboot'. Load address: 0x82000000 Loading: *############################################ 2.2 MiB/s done Bytes transferred = 642602 (9ce2a hex) Tegra30 (Beaver) # tftp 0x83000000 192.168.1.2:tmp/beaver-esJWpD/tegra30-beaver.dtb tftp 0x83000000 192.168.1.2:tmp/beaver-esJWpD/tegra30-beaver.dtb Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.222 Filename 'tmp/beaver-esJWpD/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *## 1.9 MiB/s done Bytes transferred = 24197 (5e85 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000 bootz 0x81000000 0x82000000 0x83000000 Kernel image @ 0x81000000 [ 0x000000 - 0x430d48 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83008e84

Starting kernel ...

Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 41.81 seconds. # PYBOOT: Result: FAIL

arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ----------------------------------------

sun7i-a20-cubieboard2: OFFLINE: last 40 lines of boot log: ----------------------------------------------------------

Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected

~$hardreset

Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on  0 sun7i# ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.41 seconds. # PYBOOT: Result: OFFLINE

arm-multi_v7_defconfig ----------------------

sun7i-a20-cubieboard2: FAIL: last 40 lines of boot log: -------------------------------------------------------

Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x42000000 192.168.1.2:tmp/cubie2-wKyc4e/sun7i-a20-cubieboard2.dtb tftp 0x42000000 192.168.1.2:tmp/cubie2-wKyc4e/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.186 Filename 'tmp/cubie2-wKyc4e/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.186:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun7i# bootz 0x41000000 0x43000000 0x42000000 bootz 0x41000000 0x43000000 0x42000000 Kernel image @ 0x41000000 [ 0x000000 - 0x47b1c0 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Using Device Tree in place at 42000000, end 42007844

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 39.81 seconds. # PYBOOT: Result: FAIL

sun4i-a10-cubieboard: FAIL: last 40 lines of boot log: ------------------------------------------------------

Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x42000000 192.168.1.2:tmp/cubie-u4EJcA/sun4i-a10-cubieboard.dtb tftp 0x42000000 192.168.1.2:tmp/cubie-u4EJcA/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-u4EJcA/sun4i-a10-cubieboard.dtb'. Load address: 0x42000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun4i# bootz 0x41008000 0x43000000 0x42000000 bootz 0x41008000 0x43000000 0x42000000 Kernel image @ 0x41008000 [ 0x000000 - 0x47b1c0 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 47.56 seconds. # PYBOOT: Result: FAIL

arm-sunxi_defconfig -------------------

sun7i-a20-cubieboard2: FAIL: last 40 lines of boot log: -------------------------------------------------------

Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.8 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x42000000 192.168.1.2:tmp/cubie2-REEdbW/sun7i-a20-cubieboard2.dtb tftp 0x42000000 192.168.1.2:tmp/cubie2-REEdbW/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.186 Filename 'tmp/cubie2-REEdbW/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18501 (4845 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.186:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun7i# bootz 0x41000000 0x43000000 0x42000000 bootz 0x41000000 0x43000000 0x42000000 Kernel image @ 0x41000000 [ 0x000000 - 0x1c4bf8 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Using Device Tree in place at 42000000, end 42007844

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 39.18 seconds. # PYBOOT: Result: FAIL

sun4i-a10-cubieboard: FAIL: last 40 lines of boot log: ------------------------------------------------------

Filename 'buildroot.cpio.gz.uboot'. Load address: 0x43000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x42000000 192.168.1.2:tmp/cubie-M7sqOr/sun4i-a10-cubieboard.dtb tftp 0x42000000 192.168.1.2:tmp/cubie-M7sqOr/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-M7sqOr/sun4i-a10-cubieboard.dtb'. Load address: 0x42000000 Loading: *## 2.4 MiB/s done Bytes transferred = 15184 (3b50 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 sun4i# bootz 0x41008000 0x43000000 0x42000000 bootz 0x41008000 0x43000000 0x42000000 Kernel image @ 0x41008000 [ 0x000000 - 0x1c4bf8 ] ## Loading init Ramdisk from Legacy Image at 43000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 42000000 Booting using the fdt blob at 0x42000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 43.67 seconds. # PYBOOT: Result: FAIL

arm-bcm_defconfig -----------------

bcm28155-ap: FAIL: last 40 lines of boot log: ---------------------------------------------

OKAY [ 0.684s] finished. total time: 0.934s GET_DESC ->STRING DESC sending 'device-tree' (7 KB)... OKAY [ 0.001s] writing 'device-tree'...

downloading of 7575 bytes finished Flashing Raw Image Writing to partition 'device-tree' Writing 'device-tree' DOKAY [ 0.013s] finished. total time: 0.014s ONE! GET_DESC ->STunknown partition 'initrd' error: cannot determine image filename for 'initrd' RING DESC GET_DESC ->STresuming boot... RING DESC

MMCOKAY [ 0.001s] finished. total time: 0.001s read: dev #['/home/khilman/bin/fastboot.py', 'capri', 'tmp/capri-KRV1JZ/zImage', 'tmp/capri-KRV1JZ/bcm28155-ap.dtb', 'None'] /home/khilman/bin/fastboot.py capri tmp/capri-KRV1JZ/zImage tmp/capri-KRV1JZ/bcm28155-ap.dtb None TFTP: download kernel (tmp/capri-KRV1JZ/zImage) to /tmp/kernel-fMEXCc TFTP: download dtb (tmp/capri-KRV1JZ/bcm28155-ap.dtb) to /tmp/dtb-1p4f0k Deleting /tmp/kernel-fMEXCc Deleting /tmp/dtb-1p4f0k 0, block # 72320, count 16384 ... 16384 blocks read: OK

MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK ## Flattened Device Tree blob at 9e000000 Booting using the fdt blob at 0x9e000000 Using Device Tree in place at 9e000000, end 9e004d96

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 45.01 seconds. # PYBOOT: Result: FAIL