From: Mark Brown broonie@linaro.org
The only control interface supported by this driver is I2C so there is no need for conditional compilation around the control interface.
Signed-off-by: Mark Brown broonie@linaro.org --- sound/soc/codecs/tlv320aic23.c | 25 +------------------------ 1 file changed, 1 insertion(+), 24 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c index 31762eb..3299459 100644 --- a/sound/soc/codecs/tlv320aic23.c +++ b/sound/soc/codecs/tlv320aic23.c @@ -613,7 +613,6 @@ static struct snd_soc_codec_driver soc_codec_dev_tlv320aic23 = { .num_dapm_routes = ARRAY_SIZE(tlv320aic23_intercon), };
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) /* * If the i2c layer weren't so broken, we could pass this kind of data * around @@ -660,29 +659,7 @@ static struct i2c_driver tlv320aic23_i2c_driver = { .id_table = tlv320aic23_id, };
-#endif - -static int __init tlv320aic23_modinit(void) -{ - int ret; -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) - ret = i2c_add_driver(&tlv320aic23_i2c_driver); - if (ret != 0) { - printk(KERN_ERR "Failed to register TLV320AIC23 I2C driver: %d\n", - ret); - } -#endif - return ret; -} -module_init(tlv320aic23_modinit); - -static void __exit tlv320aic23_exit(void) -{ -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) - i2c_del_driver(&tlv320aic23_i2c_driver); -#endif -} -module_exit(tlv320aic23_exit); +module_i2c_driver(tlv320aic23_i2c_driver);
MODULE_DESCRIPTION("ASoC TLV320AIC23 codec driver"); MODULE_AUTHOR("Arun KS arunks@mistralsolutions.com");
From: Mark Brown broonie@linaro.org
Signed-off-by: Mark Brown broonie@linaro.org --- sound/soc/codecs/tlv320aic23.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c index 3299459..3a6be8c 100644 --- a/sound/soc/codecs/tlv320aic23.c +++ b/sound/soc/codecs/tlv320aic23.c @@ -586,9 +586,6 @@ static int tlv320aic23_probe(struct snd_soc_codec *codec)
snd_soc_write(codec, TLV320AIC23_ACTIVE, 0x1);
- snd_soc_add_codec_controls(codec, tlv320aic23_snd_controls, - ARRAY_SIZE(tlv320aic23_snd_controls)); - return 0; }
@@ -607,6 +604,8 @@ static struct snd_soc_codec_driver soc_codec_dev_tlv320aic23 = { .suspend = tlv320aic23_suspend, .resume = tlv320aic23_resume, .set_bias_level = tlv320aic23_set_bias_level, + .controls = tlv320aic23_snd_controls, + .num_controls = ARRAY_SIZE(tlv320aic23_snd_controls), .dapm_widgets = tlv320aic23_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(tlv320aic23_dapm_widgets), .dapm_routes = tlv320aic23_intercon,
From: Mark Brown broonie@linaro.org
This moves us towards being able to remove the duplicated register I/O code in ASoC.
Signed-off-by: Mark Brown broonie@linaro.org --- sound/soc/codecs/tlv320aic23.c | 53 ++++++++++++++++++++++++------------------ 1 file changed, 31 insertions(+), 22 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c index 3a6be8c..f961e1e 100644 --- a/sound/soc/codecs/tlv320aic23.c +++ b/sound/soc/codecs/tlv320aic23.c @@ -24,6 +24,7 @@ #include <linux/delay.h> #include <linux/pm.h> #include <linux/i2c.h> +#include <linux/regmap.h> #include <linux/slab.h> #include <sound/core.h> #include <sound/pcm.h> @@ -37,11 +38,27 @@ /* * AIC23 register cache */ -static const u16 tlv320aic23_reg[] = { - 0x0097, 0x0097, 0x00F9, 0x00F9, /* 0 */ - 0x001A, 0x0004, 0x0007, 0x0001, /* 4 */ - 0x0020, 0x0000, 0x0000, 0x0000, /* 8 */ - 0x0000, 0x0000, 0x0000, 0x0000, /* 12 */ +static const struct reg_default tlv320aic23_reg[] = { + { 0, 0x0097 }, + { 1, 0x0097 }, + { 2, 0x00F9 }, + { 3, 0x00F9 }, + { 4, 0x001A }, + { 5, 0x0004 }, + { 6, 0x0007 }, + { 7, 0x0001 }, + { 8, 0x0020 }, + { 9, 0x0000 }, +}; + +static const struct regmap_config tlv320aic23_regmap = { + .reg_bits = 7, + .val_bits = 9, + + .max_register = TLV320AIC23_RESET, + .reg_defaults = tlv320aic23_reg, + .num_reg_defaults = ARRAY_SIZE(tlv320aic23_reg), + .cache_type = REGCACHE_RBTREE, };
static const char *rec_src_text[] = { "Line", "Mic" }; @@ -171,7 +188,7 @@ static const struct snd_soc_dapm_route tlv320aic23_intercon[] = {
/* AIC23 driver data */ struct aic23 { - enum snd_soc_control_type control_type; + struct regmap *regmap; int mclk; int requested_adc; int requested_dac; @@ -532,7 +549,9 @@ static int tlv320aic23_suspend(struct snd_soc_codec *codec)
static int tlv320aic23_resume(struct snd_soc_codec *codec) { - snd_soc_cache_sync(codec); + struct aic23 *aic23 = snd_soc_codec_get_drvdata(codec); + regcache_mark_dirty(aic23->regmap); + regcache_sync(aic23->regmap); tlv320aic23_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
return 0; @@ -543,7 +562,7 @@ static int tlv320aic23_probe(struct snd_soc_codec *codec) struct aic23 *aic23 = snd_soc_codec_get_drvdata(codec); int ret;
- ret = snd_soc_codec_set_cache_io(codec, 7, 9, aic23->control_type); + ret = snd_soc_codec_set_cache_io(codec, 7, 9, SND_SOC_REGMAP); if (ret < 0) { dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); return ret; @@ -552,16 +571,6 @@ static int tlv320aic23_probe(struct snd_soc_codec *codec) /* Reset codec */ snd_soc_write(codec, TLV320AIC23_RESET, 0);
- /* Write the register default value to cache for reserved registers, - * so the write to the these registers are suppressed by the cache - * restore code when it skips writes of default registers. - */ - snd_soc_cache_write(codec, 0x0A, 0); - snd_soc_cache_write(codec, 0x0B, 0); - snd_soc_cache_write(codec, 0x0C, 0); - snd_soc_cache_write(codec, 0x0D, 0); - snd_soc_cache_write(codec, 0x0E, 0); - /* power on device */ tlv320aic23_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
@@ -596,9 +605,6 @@ static int tlv320aic23_remove(struct snd_soc_codec *codec) }
static struct snd_soc_codec_driver soc_codec_dev_tlv320aic23 = { - .reg_cache_size = ARRAY_SIZE(tlv320aic23_reg), - .reg_word_size = sizeof(u16), - .reg_cache_default = tlv320aic23_reg, .probe = tlv320aic23_probe, .remove = tlv320aic23_remove, .suspend = tlv320aic23_suspend, @@ -629,8 +635,11 @@ static int tlv320aic23_codec_probe(struct i2c_client *i2c, if (aic23 == NULL) return -ENOMEM;
+ aic23->regmap = devm_regmap_init_i2c(i2c, &tlv320aic23_regmap); + if (IS_ERR(aic23->regmap)) + return PTR_ERR(aic23->regmap); + i2c_set_clientdata(i2c, aic23); - aic23->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_tlv320aic23, &tlv320aic23_dai, 1);
linaro-kernel@lists.linaro.org
-
Mark Brown