Looks good to me.

Acked-by: Jaehoon Chung jh80.chung@samsung.com

On 08/30/2013 01:15 AM, Mark Brown wrote:

From: Mark Brown broonie@linaro.org

It is possible that we may fail to set the clock rate, if we do so then log the failure and don't bother reprogramming the IP.

Signed-off-by: Mark Brown broonie@linaro.org

drivers/mmc/host/sdhci-s3c.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 926aaf6..d10de3f 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -295,6 +295,7 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock) struct device *dev = &ourhost->pdev->dev; unsigned long timeout; u16 clk = 0;

• int ret;

/* don't bother if the clock is going off */ if (clock == 0) @@ -302,7 +303,12 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock) sdhci_s3c_set_clock(host, clock);

• clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);

• ret = clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
• if (ret != 0) {

• dev_err(dev, "%s: failed to set clock rate %uHz\n",
  

• 	mmc_hostname(host->mmc), clock);
  

• return;
  

• }

host->clock = clock;