mainline boot: 13 pass, 23 fail (v3.13-9218-g0e47c96) - linaro-kernel

29 Jan 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: mainline
Git describe: v3.13-9218-g0e47c96
Failed boot tests (console logs at the end)
===========================================
                 omap4-panda:     FAIL:    omap2plus_defconfig
              omap4-panda-es:     FAIL:    omap2plus_defconfig
        omap3-tobi,3730storm:     FAIL:    omap2plus_defconfig
       sun7i-a20-cubieboard2:     FAIL:    multi_lpae_defconfig
             imx6q-wandboard:     FAIL:    imx_v6_v7_defconfig
       sun7i-a20-cubieboard2:     FAIL:    sunxi_defconfig
        sun4i-a10-cubieboard:     FAIL:    sunxi_defconfig
          exynos5250-arndale:     FAIL:    exynos_defconfig
                ste-snowball:     FAIL:    multi_v7_defconfig
              tegra30-beaver:     FAIL:    multi_v7_defconfig
       sun7i-a20-cubieboard2:     FAIL:    multi_v7_defconfig
          armada-370-mirabox:     FAIL:    multi_v7_defconfig
                 omap4-panda:     FAIL:    multi_v7_defconfig
              omap4-panda-es:     FAIL:    multi_v7_defconfig
  armada-xp-openblocks-ax3-4:     FAIL:    multi_v7_defconfig
        sun4i-a10-cubieboard:     FAIL:    multi_v7_defconfig
                 bcm28155-ap:     FAIL:    multi_v7_defconfig
             imx6q-wandboard:     FAIL:    multi_v7_defconfig
        omap3-tobi,3730storm:     FAIL:    multi_v7_defconfig
  imx6dl-wandboard,wand-dual:     FAIL:    multi_v7_defconfig
                ste-snowball:     FAIL:    u8500_defconfig
  armada-xp-openblocks-ax3-4:     FAIL:    mvebu_defconfig
          armada-370-mirabox:     FAIL:    mvebu_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
            am335x-boneblack     PASS:    0 min 25.8 sec
             omap3-beagle-xm     PASS:    1 min  0.5 sec
                 am335x-bone     PASS:    0 min 32.4 sec
                 omap4-panda     FAIL:    0 min 53.8 sec
              omap4-panda-es     FAIL:    0 min 55.2 sec
        omap3-tobi,3730storm     FAIL:    1 min 20.6 sec
        omap3-tobi,3530overo     PASS:    0 min 23.2 sec
multi_lpae_defconfig
--------------------
       sun7i-a20-cubieboard2     FAIL:    0 min 19.6 sec
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     PASS:    0 min 18.8 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 18.4 sec
             imx6q-wandboard     FAIL:    0 min 21.0 sec
sunxi_defconfig
---------------
       sun7i-a20-cubieboard2     FAIL:    0 min 17.7 sec
        sun4i-a10-cubieboard     FAIL:    0 min 22.2 sec
bcm_defconfig
-------------
                 bcm28155-ap     PASS:    1 min  4.1 sec
exynos_defconfig
----------------
          exynos5250-arndale     FAIL:    0 min 42.8 sec
multi_v7_defconfig
------------------
                ste-snowball     FAIL:    0 min 29.1 sec
              tegra30-beaver     FAIL:    0 min 24.6 sec
            am335x-boneblack     PASS:    0 min 22.5 sec
             omap3-beagle-xm     PASS:    0 min 58.3 sec
       sun7i-a20-cubieboard2     FAIL:    0 min 19.1 sec
          armada-370-mirabox     FAIL:    0 min 31.6 sec
                 omap4-panda     FAIL:    0 min 55.5 sec
              omap4-panda-es     FAIL:    0 min 57.2 sec
  armada-xp-openblocks-ax3-4     FAIL:    0 min 31.6 sec
        sun4i-a10-cubieboard     FAIL:    0 min 19.2 sec
                 bcm28155-ap     FAIL:    16 min 12.4 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 17.2 sec
                 am335x-bone     PASS:    0 min 25.4 sec
             imx6q-wandboard     FAIL:    0 min 20.4 sec
        omap3-tobi,3730storm     FAIL:    0 min 25.6 sec
  imx6dl-wandboard,wand-dual     FAIL:    0 min 21.8 sec
        omap3-tobi,3530overo     PASS:    0 min 20.9 sec
u8500_defconfig
---------------
                ste-snowball     FAIL:    0 min 28.4 sec
sama5_defconfig
---------------
                  sama5d35ek     PASS:    0 min 17.6 sec
mvebu_defconfig
---------------
  armada-xp-openblocks-ax3-4     FAIL:    0 min 31.6 sec
          armada-370-mirabox     FAIL:    0 min 31.6 sec
Console logs for failures
=========================
omap2plus_defconfig
-------------------
omap4-panda: FAIL: last 24 lines of boot log:
    ---------------------------------------------
8.8 KiB/s
done
Bytes transferred = 50077 (c39d hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f0f39c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 53.84 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log:
    ------------------------------------------------
8.8 KiB/s
done
Bytes transferred = 50489 (c539 hex)
Panda #printenv bootargs
 printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 55.22 seconds.
# PYBOOT: Result: FAIL
omap3-tobi,3730storm: FAIL: last 24 lines of boot log:
    ------------------------------------------------------
[    5.981292] [<c008fb68>] (generic_handle_irq) from [<c000eda8>] (handle_IRQ+0x4c/0xb4)
[    5.989654] [<c000eda8>] (handle_IRQ) from [<c00085b4>] (omap3_intc_handle_irq+0x60/0x74)
[    5.998291] [<c00085b4>] (omap3_intc_handle_irq) from [<c0548ba4>] (__irq_svc+0x44/0x5c)
[    6.006805] Exception stack(0xde0efcc0 to 0xde0efd08)
[    6.012145] fcc0: de4b5480 01000200 fa0b4000 34020001 de0efd2c de4b5000 de4b5000 00008000
[    6.020782] fce0: 00000000 de0efe22 de0efde6 00000000 00000000 de0efd08 c044dea0 c0436dd0
[    6.029388] fd00: 20000113 ffffffff
[    6.033081] [<c0548ba4>] (__irq_svc) from [<c0436dd0>] (mmc_start_request+0xb8/0xd4)
[    6.041259] [<c0436dd0>] (mmc_start_request) from [<c0436ef8>] (__mmc_start_req+0x54/0x84)
[    6.049987] [<c0436ef8>] (__mmc_start_req) from [<c0437398>] (mmc_wait_for_cmd+0x58/0x88)
[    6.058624] [<c0437398>] (mmc_wait_for_cmd) from [<c0440ed0>] (mmc_io_rw_direct_host+0xa4/0x13c)
[    6.067901] [<c0440ed0>] (mmc_io_rw_direct_host) from [<c0441c24>] (sdio_read_cis+0xf8/0x298)
[    6.076873] [<c0441c24>] (sdio_read_cis) from [<c0440178>] (mmc_sdio_init_card+0x3e0/0xaa4)
[    6.085693] [<c0440178>] (mmc_sdio_init_card) from [<c0440b44>] (mmc_attach_sdio+0x78/0x360)
[    6.094604] [<c0440b44>] (mmc_attach_sdio) from [<c04396b0>] (mmc_rescan+0x260/0x2e8)
[    6.102874] [<c04396b0>] (mmc_rescan) from [<c00590b8>] (process_one_work+0x1ac/0x4c4)
[    6.111206] [<c00590b8>] (process_one_work) from [<c0059f50>] (worker_thread+0x114/0x3b4)
[    6.119842] [<c0059f50>] (worker_thread) from [<c005fb44>] (kthread+0xcc/0xe8)
[    6.127471] [<c005fb44>] (kthread) from [<c000e548>] (ret_from_fork+0x14/0x2c)
[    6.135101] ---[ end trace 5e135e108bd4ff07 ]---
~$off
# PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'>
# PYBOOT: Time: 80.60 seconds.
# PYBOOT: Result: FAIL
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
    -------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x3877d0 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.60 seconds.
# PYBOOT: Result: FAIL
imx_v6_v7_defconfig
-------------------
imx6q-wandboard: FAIL: last 24 lines of boot log:
    -------------------------------------------------
Bytes transferred = 34380 (864c hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x4c4e50 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 21.01 seconds.
# PYBOOT: Result: FAIL
sunxi_defconfig
---------------
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
    -------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1af970 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 17.74 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log:
    ------------------------------------------------------
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1af970 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 22.20 seconds.
# PYBOOT: Result: FAIL
exynos_defconfig
----------------
exynos5250-arndale: FAIL: last 24 lines of boot log:
    ----------------------------------------------------
tftp 0x407c0000 192.168.1.2:tmp/arndale-BTrjmE/exynos5250-arndale.dtb
Waiting for Ethernet connection... done.
Using asx0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.167
Filename 'tmp/arndale-BTrjmE/exynos5250-arndale.dtb'.
Load address: 0x407c0000
Loading: *###
done
Bytes transferred = 33440 (82a0 hex)
ARNDALE5250 #printenv bootargs
 printenv bootargs
bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.167:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
ARNDALE5250 # bootz 0x40800000 - 0x407c0000
bootz 0x40800000 - 0x407c0000
## Flattened Device Tree blob at 407c0000
   Booting using the fdt blob at 0x407c0000
   Using Device Tree in place at 407c0000, end 407cb29f
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 42.81 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
ste-snowball: FAIL: last 24 lines of boot log:
    ----------------------------------------------
#################################################################
     ###########################################################
done
Bytes transferred = 3716481 (38b581 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000  
bootm 0x00800000  
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3716417 Bytes =  3.5 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 29.13 seconds.
# PYBOOT: Result: FAIL
tegra30-beaver: FAIL: last 24 lines of boot log:
    ------------------------------------------------
Bytes transferred = 23808 (5d00 hex)
Tegra30 (Beaver) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 debug earlyprintk
Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000
bootz 0x81000000 0x82000000 0x83000000
Kernel image @ 0x81000000 [ 0x000000 - 0x382a88 ]
## Loading init Ramdisk from Legacy Image at 82000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Using Device Tree in place at 83000000, end 83008cff
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 24.60 seconds.
# PYBOOT: Result: FAIL
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
    -------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x382a88 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.15 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log:
    ----------------------------------------------------
Connected to mirabox console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(mirabox console)> hardreset
(user:khilman) Reboot mirabox
Reboot: mirabox ; ip9258 1 1 :  off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.61 seconds.
# PYBOOT: Result: FAIL
omap4-panda: FAIL: last 24 lines of boot log:
    ---------------------------------------------
8.8 KiB/s
done
Bytes transferred = 50077 (c39d hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f0f39c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 55.52 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log:
    ------------------------------------------------
9.8 KiB/s
done
Bytes transferred = 50489 (c539 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 57.19 seconds.
# PYBOOT: Result: FAIL
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
    ------------------------------------------------------------
Connected to obsax3 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(obsax3 console)> hardreset
(user:khilman) Reboot obsax3
Reboot: obsax3 ; ip9258 1 4 :  off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.63 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log:
    ------------------------------------------------------
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x382a88 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.20 seconds.
# PYBOOT: Result: FAIL
bcm28155-ap: FAIL: last 24 lines of boot log:
    ---------------------------------------------
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__
    _call(self.context, command, ignore_failure, timeout)
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call
    context.run_command(cmd, failok=ignore_failure)
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command
    rc = subprocess.check_call(command, **output_args)
  File "/usr/lib/python2.7/subprocess.py", line 511, in check_call
    raise CalledProcessError(retcode, cmd)
CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124
<LAVA_DISPATCHER>2014-01-29 04:33:39 AM INFO: CriticalError
<LAVA_DISPATCHER>2014-01-29 04:33:39 AM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.).
ErrorMessage: Failed to boot test image.
Lava failed at action boot_linaro_image with error:Failed to boot test image.
Traceback (most recent call last):
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run
    action.run(**params)
  File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run
    raise CriticalError("Failed to boot test image.")
CriticalError: Failed to boot test image.
Reboot: capri ; ip9258 1 3 :  ['off']
<LAVA_DISPATCHER>2014-01-29 04:33:39 AM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/%27%7D
<LAVA_DISPATCHER>2014-01-29 04:33:39 AM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/47d6f456edebe2583a44361b6bd53ea33...
LBOOT: Result: FAIL
LBOOT: Time: 972.40 seconds.
imx6q-wandboard: FAIL: last 24 lines of boot log:
    -------------------------------------------------
Bytes transferred = 34380 (864c hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x382a88 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.36 seconds.
# PYBOOT: Result: FAIL
omap3-tobi,3730storm: FAIL: last 24 lines of boot log:
    ------------------------------------------------------
smc911x: MAC 00:15:c9:28:f0:11
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/3730storm-MvlMMd/omap3-tobi.dtb'.
Load address: 0x81f00000
Loading: *####
     2.3 MiB/s
done
Bytes transferred = 56692 (dd74 hex)
Overo # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Overo # bootz ${loadaddr} - 0x81f00000
bootz ${loadaddr} - 0x81f00000
## Flattened Device Tree blob at 81f00000
   Booting using the fdt blob at 0x81f00000
   Loading Device Tree to 8ffef000, end 8ffffd73 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 25.55 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log:
    ------------------------------------------------------------
1.5 MiB/s
done
Bytes transferred = 32741 (7fe5 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.165:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
   Image Name:   
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 KiB
   Load Address: 81000000
   Entry Point:  81000000
## Flattened Device Tree blob at 11000000
   Booting using the fdt blob at 0x11000000
   Using Device Tree in place at 11000000, end 1100afe4
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 21.77 seconds.
# PYBOOT: Result: FAIL
u8500_defconfig
---------------
ste-snowball: FAIL: last 24 lines of boot log:
    ----------------------------------------------
#################################################################
     #####
done
Bytes transferred = 2934601 (2cc749 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000  
bootm 0x00800000  
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2934537 Bytes =  2.8 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.42 seconds.
# PYBOOT: Result: FAIL
mvebu_defconfig
---------------
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
    ------------------------------------------------------------
Connected to obsax3 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(obsax3 console)> hardreset
(user:khilman) Reboot obsax3
Reboot: obsax3 ; ip9258 1 4 :  off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.56 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log:
    ----------------------------------------------------
Connected to mirabox console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(mirabox console)> hardreset
(user:khilman) Reboot mirabox
Reboot: mirabox ; ip9258 1 1 :  off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.58 seconds.
# PYBOOT: Result: FAIL