-- resend for correct linaro kernel ML, sorry!
Hi, all,
According to card 1213 https://cards.linaro.org/browse/CARD-1213, LSK need backport thermal framework DT support. The feature summary is here: https://lkml.org/lkml/2014/1/23/680
The LSK git tree: git://git.linaro.org/kernel/linux-linaro-stable.git It should be equal to stable tree on this feature base.
Thanks for Broonie's comments! I remove few trivial bug fix patches, and drop omap DT changes. The test passed build testing.
Any comments are appreciated!
Thanks Alex
[PATCH 01/10] thermal: allow registering without .get_temp [PATCH 02/10] thermal: hwmon: move hwmon support to single file [PATCH 03/10] drivers: thermal: make usage of CONFIG_THERMAL_HWMON [PATCH 04/10] thermal: introduce device tree parser [PATCH 05/10] thermal: core: introduce [PATCH 06/10] thermal: cpu_cooling: introduce [PATCH 07/10] hwmon: lm75: expose to thermal fw via DT nodes [PATCH 08/10] hwmon: tmp102: expose to thermal fw via DT nodes [PATCH 09/10] MAINTAINERS: add thermal bindings entry in thermal [PATCH 10/10] thermal: debug: add debug statement for core and
From: Eduardo Valentin eduardo.valentin@ti.com
This patch changes the thermal core driver to allow registration of thermal zones without the .get_temp callback.
The idea behind this change is to allow lazy registration of sensor callbacks.
The thermal zone will be disabled whenever the ops does not contain a .get_temp callback. The sysfs interface will be returning -EINVAL on any temperature read operation.
Cc: Zhang Rui rui.zhang@intel.com Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin eduardo.valentin@ti.com (cherry picked from commit 81bd4e1cebed5efb85bd94a15342ee4d6965a416)
Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/thermal/thermal_core.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index d755440..818cd78 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -388,7 +388,7 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned long *temp) enum thermal_trip_type type; #endif
- if (!tz || IS_ERR(tz)) + if (!tz || IS_ERR(tz) || !tz->ops->get_temp) goto exit;
mutex_lock(&tz->lock); @@ -441,6 +441,9 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) { int count;
+ if (!tz->ops->get_temp) + return; + update_temperature(tz);
for (count = 0; count < tz->trips; count++) @@ -1621,7 +1624,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, if (trips > THERMAL_MAX_TRIPS || trips < 0 || mask >> trips) return ERR_PTR(-EINVAL);
- if (!ops || !ops->get_temp) + if (!ops) return ERR_PTR(-EINVAL);
if (trips > 0 && !ops->get_trip_type) @@ -1723,6 +1726,9 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check);
+ if (!tz->ops->get_temp) + thermal_zone_device_set_polling(tz, 0); + thermal_zone_device_update(tz);
if (!result)
From: Eduardo Valentin eduardo.valentin@ti.com
In order to improve code organization, this patch moves the hwmon sysfs support to a file named thermal_hwmon. This helps to add extra support for hwmon without scrambling the code.
In order to do this move, the hwmon list head is now using its own locking. Before, the list used the global thermal locking. Also, some minor changes in the code were required, as recommended by checkpatch.pl.
Cc: Zhang Rui rui.zhang@intel.com Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Durgadoss R durgadoss.r@intel.com Signed-off-by: Eduardo Valentin eduardo.valentin@ti.com (cherry picked from commit 0dd88793aacd7c91b9724be7b618bb3f7c25befe)
Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/thermal/Kconfig | 9 ++ drivers/thermal/Makefile | 3 + drivers/thermal/thermal_core.c | 255 +------------------------------------ drivers/thermal/thermal_hwmon.c | 269 ++++++++++++++++++++++++++++++++++++++++ drivers/thermal/thermal_hwmon.h | 49 ++++++++ 5 files changed, 331 insertions(+), 254 deletions(-) create mode 100644 drivers/thermal/thermal_hwmon.c create mode 100644 drivers/thermal/thermal_hwmon.h
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 5e3c025..d8448bf 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -17,8 +17,17 @@ if THERMAL
config THERMAL_HWMON bool + prompt "Expose thermal sensors as hwmon device" depends on HWMON=y || HWMON=THERMAL default y + help + In case a sensor is registered with the thermal + framework, this option will also register it + as a hwmon. The sensor will then have the common + hwmon sysfs interface. + + Say 'Y' here if you want all thermal sensors to + have hwmon sysfs interface too.
choice prompt "Default Thermal governor" diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index c054d41..db989e9 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -5,6 +5,9 @@ obj-$(CONFIG_THERMAL) += thermal_sys.o thermal_sys-y += thermal_core.o
+# interface to/from other layers providing sensors +thermal_sys-$(CONFIG_THERMAL_HWMON) += thermal_hwmon.o + # governors thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += fair_share.o thermal_sys-$(CONFIG_THERMAL_GOV_STEP_WISE) += step_wise.o diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 818cd78..a3d1976 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -37,6 +37,7 @@ #include <net/genetlink.h>
#include "thermal_core.h" +#include "thermal_hwmon.h"
MODULE_AUTHOR("Zhang Rui"); MODULE_DESCRIPTION("Generic thermal management sysfs support"); @@ -857,260 +858,6 @@ thermal_cooling_device_trip_point_show(struct device *dev,
/* Device management */
-#if defined(CONFIG_THERMAL_HWMON) - -/* hwmon sys I/F */ -#include <linux/hwmon.h> - -/* thermal zone devices with the same type share one hwmon device */ -struct thermal_hwmon_device { - char type[THERMAL_NAME_LENGTH]; - struct device *device; - int count; - struct list_head tz_list; - struct list_head node; -}; - -struct thermal_hwmon_attr { - struct device_attribute attr; - char name[16]; -}; - -/* one temperature input for each thermal zone */ -struct thermal_hwmon_temp { - struct list_head hwmon_node; - struct thermal_zone_device *tz; - struct thermal_hwmon_attr temp_input; /* hwmon sys attr */ - struct thermal_hwmon_attr temp_crit; /* hwmon sys attr */ -}; - -static LIST_HEAD(thermal_hwmon_list); - -static ssize_t -name_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct thermal_hwmon_device *hwmon = dev_get_drvdata(dev); - return sprintf(buf, "%s\n", hwmon->type); -} -static DEVICE_ATTR(name, 0444, name_show, NULL); - -static ssize_t -temp_input_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - long temperature; - int ret; - struct thermal_hwmon_attr *hwmon_attr - = container_of(attr, struct thermal_hwmon_attr, attr); - struct thermal_hwmon_temp *temp - = container_of(hwmon_attr, struct thermal_hwmon_temp, - temp_input); - struct thermal_zone_device *tz = temp->tz; - - ret = thermal_zone_get_temp(tz, &temperature); - - if (ret) - return ret; - - return sprintf(buf, "%ld\n", temperature); -} - -static ssize_t -temp_crit_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct thermal_hwmon_attr *hwmon_attr - = container_of(attr, struct thermal_hwmon_attr, attr); - struct thermal_hwmon_temp *temp - = container_of(hwmon_attr, struct thermal_hwmon_temp, - temp_crit); - struct thermal_zone_device *tz = temp->tz; - long temperature; - int ret; - - ret = tz->ops->get_trip_temp(tz, 0, &temperature); - if (ret) - return ret; - - return sprintf(buf, "%ld\n", temperature); -} - - -static struct thermal_hwmon_device * -thermal_hwmon_lookup_by_type(const struct thermal_zone_device *tz) -{ - struct thermal_hwmon_device *hwmon; - - mutex_lock(&thermal_list_lock); - list_for_each_entry(hwmon, &thermal_hwmon_list, node) - if (!strcmp(hwmon->type, tz->type)) { - mutex_unlock(&thermal_list_lock); - return hwmon; - } - mutex_unlock(&thermal_list_lock); - - return NULL; -} - -/* Find the temperature input matching a given thermal zone */ -static struct thermal_hwmon_temp * -thermal_hwmon_lookup_temp(const struct thermal_hwmon_device *hwmon, - const struct thermal_zone_device *tz) -{ - struct thermal_hwmon_temp *temp; - - mutex_lock(&thermal_list_lock); - list_for_each_entry(temp, &hwmon->tz_list, hwmon_node) - if (temp->tz == tz) { - mutex_unlock(&thermal_list_lock); - return temp; - } - mutex_unlock(&thermal_list_lock); - - return NULL; -} - -static int -thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) -{ - struct thermal_hwmon_device *hwmon; - struct thermal_hwmon_temp *temp; - int new_hwmon_device = 1; - int result; - - hwmon = thermal_hwmon_lookup_by_type(tz); - if (hwmon) { - new_hwmon_device = 0; - goto register_sys_interface; - } - - hwmon = kzalloc(sizeof(struct thermal_hwmon_device), GFP_KERNEL); - if (!hwmon) - return -ENOMEM; - - INIT_LIST_HEAD(&hwmon->tz_list); - strlcpy(hwmon->type, tz->type, THERMAL_NAME_LENGTH); - hwmon->device = hwmon_device_register(NULL); - if (IS_ERR(hwmon->device)) { - result = PTR_ERR(hwmon->device); - goto free_mem; - } - dev_set_drvdata(hwmon->device, hwmon); - result = device_create_file(hwmon->device, &dev_attr_name); - if (result) - goto free_mem; - - register_sys_interface: - temp = kzalloc(sizeof(struct thermal_hwmon_temp), GFP_KERNEL); - if (!temp) { - result = -ENOMEM; - goto unregister_name; - } - - temp->tz = tz; - hwmon->count++; - - snprintf(temp->temp_input.name, sizeof(temp->temp_input.name), - "temp%d_input", hwmon->count); - temp->temp_input.attr.attr.name = temp->temp_input.name; - temp->temp_input.attr.attr.mode = 0444; - temp->temp_input.attr.show = temp_input_show; - sysfs_attr_init(&temp->temp_input.attr.attr); - result = device_create_file(hwmon->device, &temp->temp_input.attr); - if (result) - goto free_temp_mem; - - if (tz->ops->get_crit_temp) { - unsigned long temperature; - if (!tz->ops->get_crit_temp(tz, &temperature)) { - snprintf(temp->temp_crit.name, - sizeof(temp->temp_crit.name), - "temp%d_crit", hwmon->count); - temp->temp_crit.attr.attr.name = temp->temp_crit.name; - temp->temp_crit.attr.attr.mode = 0444; - temp->temp_crit.attr.show = temp_crit_show; - sysfs_attr_init(&temp->temp_crit.attr.attr); - result = device_create_file(hwmon->device, - &temp->temp_crit.attr); - if (result) - goto unregister_input; - } - } - - mutex_lock(&thermal_list_lock); - if (new_hwmon_device) - list_add_tail(&hwmon->node, &thermal_hwmon_list); - list_add_tail(&temp->hwmon_node, &hwmon->tz_list); - mutex_unlock(&thermal_list_lock); - - return 0; - - unregister_input: - device_remove_file(hwmon->device, &temp->temp_input.attr); - free_temp_mem: - kfree(temp); - unregister_name: - if (new_hwmon_device) { - device_remove_file(hwmon->device, &dev_attr_name); - hwmon_device_unregister(hwmon->device); - } - free_mem: - if (new_hwmon_device) - kfree(hwmon); - - return result; -} - -static void -thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) -{ - struct thermal_hwmon_device *hwmon; - struct thermal_hwmon_temp *temp; - - hwmon = thermal_hwmon_lookup_by_type(tz); - if (unlikely(!hwmon)) { - /* Should never happen... */ - dev_dbg(&tz->device, "hwmon device lookup failed!\n"); - return; - } - - temp = thermal_hwmon_lookup_temp(hwmon, tz); - if (unlikely(!temp)) { - /* Should never happen... */ - dev_dbg(&tz->device, "temperature input lookup failed!\n"); - return; - } - - device_remove_file(hwmon->device, &temp->temp_input.attr); - if (tz->ops->get_crit_temp) - device_remove_file(hwmon->device, &temp->temp_crit.attr); - - mutex_lock(&thermal_list_lock); - list_del(&temp->hwmon_node); - kfree(temp); - if (!list_empty(&hwmon->tz_list)) { - mutex_unlock(&thermal_list_lock); - return; - } - list_del(&hwmon->node); - mutex_unlock(&thermal_list_lock); - - device_remove_file(hwmon->device, &dev_attr_name); - hwmon_device_unregister(hwmon->device); - kfree(hwmon); -} -#else -static int -thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) -{ - return 0; -} - -static void -thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) -{ -} -#endif - /** * thermal_zone_bind_cooling_device() - bind a cooling device to a thermal zone * @tz: pointer to struct thermal_zone_device diff --git a/drivers/thermal/thermal_hwmon.c b/drivers/thermal/thermal_hwmon.c new file mode 100644 index 0000000..fdb0719 --- /dev/null +++ b/drivers/thermal/thermal_hwmon.c @@ -0,0 +1,269 @@ +/* + * thermal_hwmon.c - Generic Thermal Management hwmon support. + * + * Code based on Intel thermal_core.c. Copyrights of the original code: + * Copyright (C) 2008 Intel Corp + * Copyright (C) 2008 Zhang Rui rui.zhang@intel.com + * Copyright (C) 2008 Sujith Thomas sujith.thomas@intel.com + * + * Copyright (C) 2013 Texas Instruments + * Copyright (C) 2013 Eduardo Valentin eduardo.valentin@ti.com + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ +#include <linux/hwmon.h> +#include <linux/thermal.h> +#include <linux/slab.h> +#include <linux/err.h> +#include "thermal_hwmon.h" + +/* hwmon sys I/F */ +/* thermal zone devices with the same type share one hwmon device */ +struct thermal_hwmon_device { + char type[THERMAL_NAME_LENGTH]; + struct device *device; + int count; + struct list_head tz_list; + struct list_head node; +}; + +struct thermal_hwmon_attr { + struct device_attribute attr; + char name[16]; +}; + +/* one temperature input for each thermal zone */ +struct thermal_hwmon_temp { + struct list_head hwmon_node; + struct thermal_zone_device *tz; + struct thermal_hwmon_attr temp_input; /* hwmon sys attr */ + struct thermal_hwmon_attr temp_crit; /* hwmon sys attr */ +}; + +static LIST_HEAD(thermal_hwmon_list); + +static DEFINE_MUTEX(thermal_hwmon_list_lock); + +static ssize_t +name_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct thermal_hwmon_device *hwmon = dev_get_drvdata(dev); + return sprintf(buf, "%s\n", hwmon->type); +} +static DEVICE_ATTR(name, 0444, name_show, NULL); + +static ssize_t +temp_input_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + long temperature; + int ret; + struct thermal_hwmon_attr *hwmon_attr + = container_of(attr, struct thermal_hwmon_attr, attr); + struct thermal_hwmon_temp *temp + = container_of(hwmon_attr, struct thermal_hwmon_temp, + temp_input); + struct thermal_zone_device *tz = temp->tz; + + ret = thermal_zone_get_temp(tz, &temperature); + + if (ret) + return ret; + + return sprintf(buf, "%ld\n", temperature); +} + +static ssize_t +temp_crit_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct thermal_hwmon_attr *hwmon_attr + = container_of(attr, struct thermal_hwmon_attr, attr); + struct thermal_hwmon_temp *temp + = container_of(hwmon_attr, struct thermal_hwmon_temp, + temp_crit); + struct thermal_zone_device *tz = temp->tz; + long temperature; + int ret; + + ret = tz->ops->get_trip_temp(tz, 0, &temperature); + if (ret) + return ret; + + return sprintf(buf, "%ld\n", temperature); +} + + +static struct thermal_hwmon_device * +thermal_hwmon_lookup_by_type(const struct thermal_zone_device *tz) +{ + struct thermal_hwmon_device *hwmon; + + mutex_lock(&thermal_hwmon_list_lock); + list_for_each_entry(hwmon, &thermal_hwmon_list, node) + if (!strcmp(hwmon->type, tz->type)) { + mutex_unlock(&thermal_hwmon_list_lock); + return hwmon; + } + mutex_unlock(&thermal_hwmon_list_lock); + + return NULL; +} + +/* Find the temperature input matching a given thermal zone */ +static struct thermal_hwmon_temp * +thermal_hwmon_lookup_temp(const struct thermal_hwmon_device *hwmon, + const struct thermal_zone_device *tz) +{ + struct thermal_hwmon_temp *temp; + + mutex_lock(&thermal_hwmon_list_lock); + list_for_each_entry(temp, &hwmon->tz_list, hwmon_node) + if (temp->tz == tz) { + mutex_unlock(&thermal_hwmon_list_lock); + return temp; + } + mutex_unlock(&thermal_hwmon_list_lock); + + return NULL; +} + +int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) +{ + struct thermal_hwmon_device *hwmon; + struct thermal_hwmon_temp *temp; + int new_hwmon_device = 1; + int result; + + hwmon = thermal_hwmon_lookup_by_type(tz); + if (hwmon) { + new_hwmon_device = 0; + goto register_sys_interface; + } + + hwmon = kzalloc(sizeof(*hwmon), GFP_KERNEL); + if (!hwmon) + return -ENOMEM; + + INIT_LIST_HEAD(&hwmon->tz_list); + strlcpy(hwmon->type, tz->type, THERMAL_NAME_LENGTH); + hwmon->device = hwmon_device_register(NULL); + if (IS_ERR(hwmon->device)) { + result = PTR_ERR(hwmon->device); + goto free_mem; + } + dev_set_drvdata(hwmon->device, hwmon); + result = device_create_file(hwmon->device, &dev_attr_name); + if (result) + goto free_mem; + + register_sys_interface: + temp = kzalloc(sizeof(*temp), GFP_KERNEL); + if (!temp) { + result = -ENOMEM; + goto unregister_name; + } + + temp->tz = tz; + hwmon->count++; + + snprintf(temp->temp_input.name, sizeof(temp->temp_input.name), + "temp%d_input", hwmon->count); + temp->temp_input.attr.attr.name = temp->temp_input.name; + temp->temp_input.attr.attr.mode = 0444; + temp->temp_input.attr.show = temp_input_show; + sysfs_attr_init(&temp->temp_input.attr.attr); + result = device_create_file(hwmon->device, &temp->temp_input.attr); + if (result) + goto free_temp_mem; + + if (tz->ops->get_crit_temp) { + unsigned long temperature; + if (!tz->ops->get_crit_temp(tz, &temperature)) { + snprintf(temp->temp_crit.name, + sizeof(temp->temp_crit.name), + "temp%d_crit", hwmon->count); + temp->temp_crit.attr.attr.name = temp->temp_crit.name; + temp->temp_crit.attr.attr.mode = 0444; + temp->temp_crit.attr.show = temp_crit_show; + sysfs_attr_init(&temp->temp_crit.attr.attr); + result = device_create_file(hwmon->device, + &temp->temp_crit.attr); + if (result) + goto unregister_input; + } + } + + mutex_lock(&thermal_hwmon_list_lock); + if (new_hwmon_device) + list_add_tail(&hwmon->node, &thermal_hwmon_list); + list_add_tail(&temp->hwmon_node, &hwmon->tz_list); + mutex_unlock(&thermal_hwmon_list_lock); + + return 0; + + unregister_input: + device_remove_file(hwmon->device, &temp->temp_input.attr); + free_temp_mem: + kfree(temp); + unregister_name: + if (new_hwmon_device) { + device_remove_file(hwmon->device, &dev_attr_name); + hwmon_device_unregister(hwmon->device); + } + free_mem: + if (new_hwmon_device) + kfree(hwmon); + + return result; +} + +void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) +{ + struct thermal_hwmon_device *hwmon; + struct thermal_hwmon_temp *temp; + + hwmon = thermal_hwmon_lookup_by_type(tz); + if (unlikely(!hwmon)) { + /* Should never happen... */ + dev_dbg(&tz->device, "hwmon device lookup failed!\n"); + return; + } + + temp = thermal_hwmon_lookup_temp(hwmon, tz); + if (unlikely(!temp)) { + /* Should never happen... */ + dev_dbg(&tz->device, "temperature input lookup failed!\n"); + return; + } + + device_remove_file(hwmon->device, &temp->temp_input.attr); + if (tz->ops->get_crit_temp) + device_remove_file(hwmon->device, &temp->temp_crit.attr); + + mutex_lock(&thermal_hwmon_list_lock); + list_del(&temp->hwmon_node); + kfree(temp); + if (!list_empty(&hwmon->tz_list)) { + mutex_unlock(&thermal_hwmon_list_lock); + return; + } + list_del(&hwmon->node); + mutex_unlock(&thermal_hwmon_list_lock); + + device_remove_file(hwmon->device, &dev_attr_name); + hwmon_device_unregister(hwmon->device); + kfree(hwmon); +} diff --git a/drivers/thermal/thermal_hwmon.h b/drivers/thermal/thermal_hwmon.h new file mode 100644 index 0000000..c798fdb --- /dev/null +++ b/drivers/thermal/thermal_hwmon.h @@ -0,0 +1,49 @@ +/* + * thermal_hwmon.h - Generic Thermal Management hwmon support. + * + * Code based on Intel thermal_core.c. Copyrights of the original code: + * Copyright (C) 2008 Intel Corp + * Copyright (C) 2008 Zhang Rui rui.zhang@intel.com + * Copyright (C) 2008 Sujith Thomas sujith.thomas@intel.com + * + * Copyright (C) 2013 Texas Instruments + * Copyright (C) 2013 Eduardo Valentin eduardo.valentin@ti.com + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ +#ifndef __THERMAL_HWMON_H__ +#define __THERMAL_HWMON_H__ + +#include <linux/thermal.h> + +#ifdef CONFIG_THERMAL_HWMON +int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz); +void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz); +#else +static int +thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) +{ + return 0; +} + +static void +thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) +{ +} +#endif + +#endif /* __THERMAL_HWMON_H__ */
From: Eduardo Valentin eduardo.valentin@ti.com
When registering a new thermal_device, the thermal framework will always add a hwmon sysfs interface.
This patch adds a flag to make this behavior optional. Now when registering a new thermal device, the caller can optionally inform if hwmon interface is desirable. This can be done by means of passing a thermal_zone_params.no_hwmon == true.
In order to keep same behavior as of today, all current calls will by default create the hwmon interface.
Cc: David Woodhouse dwmw2@infradead.org Cc: linux-acpi@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: Zhang Rui rui.zhang@intel.com Suggested-by: Wei Ni wni@nvidia.com Signed-off-by: Eduardo Valentin eduardo.valentin@ti.com (cherry picked from commit ccba4ffd9eff6120a20cc7656458ac554aec4b0c)
Signed-off-by: Alex Shi alex.shi@linaro.org --- Documentation/thermal/sysfs-api.txt | 5 +++++ drivers/thermal/thermal_core.c | 8 +++++--- include/linux/thermal.h | 8 ++++++++ 3 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index a71bd5b..37c5486 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -142,6 +142,11 @@ temperature) and throttle appropriate devices. This is an optional feature where some platforms can choose not to provide this data. .governor_name: Name of the thermal governor used for this zone + .no_hwmon: a boolean to indicate if the thermal to hwmon sysfs interface + is required. when no_hwmon == false, a hwmon sysfs interface + will be created. when no_hwmon == true, nothing will be done. + In case the thermal_zone_params is NULL, the hwmon interface + will be created (for backward compatibility). .num_tbps: Number of thermal_bind_params entries for this zone .tbp: thermal_bind_params entries
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index a3d1976..4f4b788 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -1460,9 +1460,11 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
mutex_unlock(&thermal_governor_lock);
- result = thermal_add_hwmon_sysfs(tz); - if (result) - goto unregister; + if (!tz->tzp || !tz->tzp->no_hwmon) { + result = thermal_add_hwmon_sysfs(tz); + if (result) + goto unregister; + }
mutex_lock(&thermal_list_lock); list_add_tail(&tz->node, &thermal_tz_list); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index a386a1c..b4a975f 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -214,6 +214,14 @@ struct thermal_bind_params { /* Structure to define Thermal Zone parameters */ struct thermal_zone_params { char governor_name[THERMAL_NAME_LENGTH]; + + /* + * a boolean to indicate if the thermal to hwmon sysfs interface + * is required. when no_hwmon == false, a hwmon sysfs interface + * will be created. when no_hwmon == true, nothing will be done + */ + bool no_hwmon; + int num_tbps; /* Number of tbp entries */ struct thermal_bind_params *tbp; };
From: Eduardo Valentin eduardo.valentin@ti.com
This patch introduces a device tree bindings for describing the hardware thermal behavior and limits. Also a parser to read and interpret the data and feed it in the thermal framework is presented.
This patch introduces a thermal data parser for device tree. The parsed data is used to build thermal zones and thermal binding parameters. The output data can then be used to deploy thermal policies.
This patch adds also documentation regarding this API and how to define tree nodes to use this infrastructure.
Note that, in order to be able to have control on the sensor registration on the DT thermal zone, it was required to allow changing the thermal zone .get_temp callback. For this reason, this patch also removes the 'const' modifier from the .ops field of thermal zone devices.
Cc: Zhang Rui rui.zhang@intel.com Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Mark Rutland mark.rutland@arm.com Signed-off-by: Eduardo Valentin eduardo.valentin@ti.com (cherry picked from commit 4e5e4705bf69ea450f58fc709ac5888f321a9299)
Signed-off-by: Alex Shi alex.shi@linaro.org --- .../devicetree/bindings/thermal/thermal.txt | 595 +++++++++++++++ drivers/thermal/Kconfig | 13 + drivers/thermal/Makefile | 1 + drivers/thermal/of-thermal.c | 849 +++++++++++++++++++++ drivers/thermal/thermal_core.c | 9 +- drivers/thermal/thermal_core.h | 9 + include/dt-bindings/thermal/thermal.h | 17 + include/linux/thermal.h | 28 +- 8 files changed, 1518 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/thermal/thermal.txt create mode 100644 drivers/thermal/of-thermal.c create mode 100644 include/dt-bindings/thermal/thermal.h
diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt new file mode 100644 index 0000000..f5db6b7 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/thermal.txt @@ -0,0 +1,595 @@ +* Thermal Framework Device Tree descriptor + +This file describes a generic binding to provide a way of +defining hardware thermal structure using device tree. +A thermal structure includes thermal zones and their components, +such as trip points, polling intervals, sensors and cooling devices +binding descriptors. + +The target of device tree thermal descriptors is to describe only +the hardware thermal aspects. The thermal device tree bindings are +not about how the system must control or which algorithm or policy +must be taken in place. + +There are five types of nodes involved to describe thermal bindings: +- thermal sensors: devices which may be used to take temperature + measurements. +- cooling devices: devices which may be used to dissipate heat. +- trip points: describe key temperatures at which cooling is recommended. The + set of points should be chosen based on hardware limits. +- cooling maps: used to describe links between trip points and cooling devices; +- thermal zones: used to describe thermal data within the hardware; + +The following is a description of each of these node types. + +* Thermal sensor devices + +Thermal sensor devices are nodes providing temperature sensing capabilities on +thermal zones. Typical devices are I2C ADC converters and bandgaps. These are +nodes providing temperature data to thermal zones. Thermal sensor devices may +control one or more internal sensors. + +Required property: +- #thermal-sensor-cells: Used to provide sensor device specific information + Type: unsigned while referring to it. Typically 0 on thermal sensor + Size: one cell nodes with only one sensor, and at least 1 on nodes + with several internal sensors, in order + to identify uniquely the sensor instances within + the IC. See thermal zone binding for more details + on how consumers refer to sensor devices. + +* Cooling device nodes + +Cooling devices are nodes providing control on power dissipation. There +are essentially two ways to provide control on power dissipation. First +is by means of regulating device performance, which is known as passive +cooling. A typical passive cooling is a CPU that has dynamic voltage and +frequency scaling (DVFS), and uses lower frequencies as cooling states. +Second is by means of activating devices in order to remove +the dissipated heat, which is known as active cooling, e.g. regulating +fan speeds. In both cases, cooling devices shall have a way to determine +the state of cooling in which the device is. + +Any cooling device has a range of cooling states (i.e. different levels +of heat dissipation). For example a fan's cooling states correspond to +the different fan speeds possible. Cooling states are referred to by +single unsigned integers, where larger numbers mean greater heat +dissipation. The precise set of cooling states associated with a device +(as referred to be the cooling-min-state and cooling-max-state +properties) should be defined in a particular device's binding. +For more examples of cooling devices, refer to the example sections below. + +Required properties: +- cooling-min-state: An integer indicating the smallest + Type: unsigned cooling state accepted. Typically 0. + Size: one cell + +- cooling-max-state: An integer indicating the largest + Type: unsigned cooling state accepted. + Size: one cell + +- #cooling-cells: Used to provide cooling device specific information + Type: unsigned while referring to it. Must be at least 2, in order + Size: one cell to specify minimum and maximum cooling state used + in the reference. The first cell is the minimum + cooling state requested and the second cell is + the maximum cooling state requested in the reference. + See Cooling device maps section below for more details + on how consumers refer to cooling devices. + +* Trip points + +The trip node is a node to describe a point in the temperature domain +in which the system takes an action. This node describes just the point, +not the action. + +Required properties: +- temperature: An integer indicating the trip temperature level, + Type: signed in millicelsius. + Size: one cell + +- hysteresis: A low hysteresis value on temperature property (above). + Type: unsigned This is a relative value, in millicelsius. + Size: one cell + +- type: a string containing the trip type. Expected values are: + "active": A trip point to enable active cooling + "passive": A trip point to enable passive cooling + "hot": A trip point to notify emergency + "critical": Hardware not reliable. + Type: string + +* Cooling device maps + +The cooling device maps node is a node to describe how cooling devices +get assigned to trip points of the zone. The cooling devices are expected +to be loaded in the target system. + +Required properties: +- cooling-device: A phandle of a cooling device with its specifier, + Type: phandle + referring to which cooling device is used in this + cooling specifier binding. In the cooling specifier, the first cell + is the minimum cooling state and the second cell + is the maximum cooling state used in this map. +- trip: A phandle of a trip point node within the same thermal + Type: phandle of zone. + trip point node + +Optional property: +- contribution: The cooling contribution to the thermal zone of the + Type: unsigned referred cooling device at the referred trip point. + Size: one cell The contribution is a ratio of the sum + of all cooling contributions within a thermal zone. + +Note: Using the THERMAL_NO_LIMIT (-1UL) constant in the cooling-device phandle +limit specifier means: +(i) - minimum state allowed for minimum cooling state used in the reference. +(ii) - maximum state allowed for maximum cooling state used in the reference. +Refer to include/dt-bindings/thermal/thermal.h for definition of this constant. + +* Thermal zone nodes + +The thermal zone node is the node containing all the required info +for describing a thermal zone, including its cooling device bindings. The +thermal zone node must contain, apart from its own properties, one sub-node +containing trip nodes and one sub-node containing all the zone cooling maps. + +Required properties: +- polling-delay: The maximum number of milliseconds to wait between polls + Type: unsigned when checking this thermal zone. + Size: one cell + +- polling-delay-passive: The maximum number of milliseconds to wait + Type: unsigned between polls when performing passive cooling. + Size: one cell + +- thermal-sensors: A list of thermal sensor phandles and sensor specifier + Type: list of used while monitoring the thermal zone. + phandles + sensor + specifier + +- trips: A sub-node which is a container of only trip point nodes + Type: sub-node required to describe the thermal zone. + +- cooling-maps: A sub-node which is a container of only cooling device + Type: sub-node map nodes, used to describe the relation between trips + and cooling devices. + +Optional property: +- coefficients: An array of integers (one signed cell) containing + Type: array coefficients to compose a linear relation between + Elem size: one cell the sensors listed in the thermal-sensors property. + Elem type: signed Coefficients defaults to 1, in case this property + is not specified. A simple linear polynomial is used: + Z = c0 * x0 + c1 + x1 + ... + c(n-1) * x(n-1) + cn. + + The coefficients are ordered and they match with sensors + by means of sensor ID. Additional coefficients are + interpreted as constant offset. + +Note: The delay properties are bound to the maximum dT/dt (temperature +derivative over time) in two situations for a thermal zone: +(i) - when passive cooling is activated (polling-delay-passive); and +(ii) - when the zone just needs to be monitored (polling-delay) or +when active cooling is activated. + +The maximum dT/dt is highly bound to hardware power consumption and dissipation +capability. The delays should be chosen to account for said max dT/dt, +such that a device does not cross several trip boundaries unexpectedly +between polls. Choosing the right polling delays shall avoid having the +device in temperature ranges that may damage the silicon structures and +reduce silicon lifetime. + +* The thermal-zones node + +The "thermal-zones" node is a container for all thermal zone nodes. It shall +contain only sub-nodes describing thermal zones as in the section +"Thermal zone nodes". The "thermal-zones" node appears under "/". + +* Examples + +Below are several examples on how to use thermal data descriptors +using device tree bindings: + +(a) - CPU thermal zone + +The CPU thermal zone example below describes how to setup one thermal zone +using one single sensor as temperature source and many cooling devices and +power dissipation control sources. + +#include <dt-bindings/thermal/thermal.h> + +cpus { + /* + * Here is an example of describing a cooling device for a DVFS + * capable CPU. The CPU node describes its four OPPs. + * The cooling states possible are 0..3, and they are + * used as OPP indexes. The minimum cooling state is 0, which means + * all four OPPs can be available to the system. The maximum + * cooling state is 3, which means only the lowest OPPs (198MHz@0.85V) + * can be available in the system. + */ + cpu0: cpu@0 { + ... + operating-points = < + /* kHz uV */ + 970000 1200000 + 792000 1100000 + 396000 950000 + 198000 850000 + >; + cooling-min-state = <0>; + cooling-max-state = <3>; + #cooling-cells = <2>; /* min followed by max */ + }; + ... +}; + +&i2c1 { + ... + /* + * A simple fan controller which supports 10 speeds of operation + * (represented as 0-9). + */ + fan0: fan@0x48 { + ... + cooling-min-state = <0>; + cooling-max-state = <9>; + #cooling-cells = <2>; /* min followed by max */ + }; +}; + +ocp { + ... + /* + * A simple IC with a single bandgap temperature sensor. + */ + bandgap0: bandgap@0x0000ED00 { + ... + #thermal-sensor-cells = <0>; + }; +}; + +thermal-zones { + cpu-thermal: cpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + thermal-sensors = <&bandgap0>; + + trips { + cpu-alert0: cpu-alert { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + cpu-alert1: cpu-alert { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu-crit: cpu-crit { + temperature = <125000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu-alert0>; + cooling-device = <&fan0 THERMAL_NO_LIMITS 4>; + }; + map1 { + trip = <&cpu-alert1>; + cooling-device = <&fan0 5 THERMAL_NO_LIMITS>; + }; + map2 { + trip = <&cpu-alert1>; + cooling-device = + <&cpu0 THERMAL_NO_LIMITS THERMAL_NO_LIMITS>; + }; + }; + }; +}; + +In the example above, the ADC sensor (bandgap0) at address 0x0000ED00 is +used to monitor the zone 'cpu-thermal' using its sole sensor. A fan +device (fan0) is controlled via I2C bus 1, at address 0x48, and has ten +different cooling states 0-9. It is used to remove the heat out of +the thermal zone 'cpu-thermal' using its cooling states +from its minimum to 4, when it reaches trip point 'cpu-alert0' +at 90C, as an example of active cooling. The same cooling device is used at +'cpu-alert1', but from 5 to its maximum state. The cpu@0 device is also +linked to the same thermal zone, 'cpu-thermal', as a passive cooling device, +using all its cooling states at trip point 'cpu-alert1', +which is a trip point at 100C. On the thermal zone 'cpu-thermal', at the +temperature of 125C, represented by the trip point 'cpu-crit', the silicon +is not reliable anymore. + +(b) - IC with several internal sensors + +The example below describes how to deploy several thermal zones based off a +single sensor IC, assuming it has several internal sensors. This is a common +case on SoC designs with several internal IPs that may need different thermal +requirements, and thus may have their own sensor to monitor or detect internal +hotspots in their silicon. + +#include <dt-bindings/thermal/thermal.h> + +ocp { + ... + /* + * A simple IC with several bandgap temperature sensors. + */ + bandgap0: bandgap@0x0000ED00 { + ... + #thermal-sensor-cells = <1>; + }; +}; + +thermal-zones { + cpu-thermal: cpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&bandgap0 0>; + + trips { + /* each zone within the SoC may have its own trips */ + cpu-alert: cpu-alert { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu-crit: cpu-crit { + temperature = <125000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + /* each zone within the SoC may have its own cooling */ + ... + }; + }; + + gpu-thermal: gpu-thermal { + polling-delay-passive = <120>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&bandgap0 1>; + + trips { + /* each zone within the SoC may have its own trips */ + gpu-alert: gpu-alert { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu-crit: gpu-crit { + temperature = <105000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + /* each zone within the SoC may have its own cooling */ + ... + }; + }; + + dsp-thermal: dsp-thermal { + polling-delay-passive = <50>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&bandgap0 2>; + + trips { + /* each zone within the SoC may have its own trips */ + dsp-alert: gpu-alert { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + dsp-crit: gpu-crit { + temperature = <135000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + /* each zone within the SoC may have its own cooling */ + ... + }; + }; +}; + +In the example above, there is one bandgap IC which has the capability to +monitor three sensors. The hardware has been designed so that sensors are +placed on different places in the DIE to monitor different temperature +hotspots: one for CPU thermal zone, one for GPU thermal zone and the +other to monitor a DSP thermal zone. + +Thus, there is a need to assign each sensor provided by the bandgap IC +to different thermal zones. This is achieved by means of using the +#thermal-sensor-cells property and using the first cell of the sensor +specifier as sensor ID. In the example, then, <bandgap 0> is used to +monitor CPU thermal zone, <bandgap 1> is used to monitor GPU thermal +zone and <bandgap 2> is used to monitor DSP thermal zone. Each zone +may be uncorrelated, having its own dT/dt requirements, trips +and cooling maps. + + +(c) - Several sensors within one single thermal zone + +The example below illustrates how to use more than one sensor within +one thermal zone. + +#include <dt-bindings/thermal/thermal.h> + +&i2c1 { + ... + /* + * A simple IC with a single temperature sensor. + */ + adc: sensor@0x49 { + ... + #thermal-sensor-cells = <0>; + }; +}; + +ocp { + ... + /* + * A simple IC with a single bandgap temperature sensor. + */ + bandgap0: bandgap@0x0000ED00 { + ... + #thermal-sensor-cells = <0>; + }; +}; + +thermal-zones { + cpu-thermal: cpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + thermal-sensors = <&bandgap0>, /* cpu */ + <&adc>; /* pcb north */ + + /* hotspot = 100 * bandgap - 120 * adc + 484 */ + coefficients = <100 -120 484>; + + trips { + ... + }; + + cooling-maps { + ... + }; + }; +}; + +In some cases, there is a need to use more than one sensor to extrapolate +a thermal hotspot in the silicon. The above example illustrates this situation. +For instance, it may be the case that a sensor external to CPU IP may be placed +close to CPU hotspot and together with internal CPU sensor, it is used +to determine the hotspot. Assuming this is the case for the above example, +the hypothetical extrapolation rule would be: + hotspot = 100 * bandgap - 120 * adc + 484 + +In other context, the same idea can be used to add fixed offset. For instance, +consider the hotspot extrapolation rule below: + hotspot = 1 * adc + 6000 + +In the above equation, the hotspot is always 6C higher than what is read +from the ADC sensor. The binding would be then: + thermal-sensors = <&adc>; + + /* hotspot = 1 * adc + 6000 */ + coefficients = <1 6000>; + +(d) - Board thermal + +The board thermal example below illustrates how to setup one thermal zone +with many sensors and many cooling devices. + +#include <dt-bindings/thermal/thermal.h> + +&i2c1 { + ... + /* + * An IC with several temperature sensor. + */ + adc-dummy: sensor@0x50 { + ... + #thermal-sensor-cells = <1>; /* sensor internal ID */ + }; +}; + +thermal-zones { + batt-thermal { + polling-delay-passive = <500>; /* milliseconds */ + polling-delay = <2500>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&adc-dummy 4>; + + trips { + ... + }; + + cooling-maps { + ... + }; + }; + + board-thermal: board-thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <2500>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&adc-dummy 0>, /* pcb top edge */ + <&adc-dummy 1>, /* lcd */ + <&adc-dymmy 2>; /* back cover */ + /* + * An array of coefficients describing the sensor + * linear relation. E.g.: + * z = c1*x1 + c2*x2 + c3*x3 + */ + coefficients = <1200 -345 890>; + + trips { + /* Trips are based on resulting linear equation */ + cpu-trip: cpu-trip { + temperature = <60000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu-trip: gpu-trip { + temperature = <55000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + } + lcd-trip: lcp-trip { + temperature = <53000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + crit-trip: crit-trip { + temperature = <68000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu-trip>; + cooling-device = <&cpu0 0 2>; + contribution = <55>; + }; + map1 { + trip = <&gpu-trip>; + cooling-device = <&gpu0 0 2>; + contribution = <20>; + }; + map2 { + trip = <&lcd-trip>; + cooling-device = <&lcd0 5 10>; + contribution = <15>; + }; + }; + }; +}; + +The above example is a mix of previous examples, a sensor IP with several internal +sensors used to monitor different zones, one of them is composed by several sensors and +with different cooling devices. diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index d8448bf..3630c07 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -29,6 +29,19 @@ config THERMAL_HWMON Say 'Y' here if you want all thermal sensors to have hwmon sysfs interface too.
+config THERMAL_OF + bool + prompt "APIs to parse thermal data out of device tree" + depends on OF + default y + help + This options provides helpers to add the support to + read and parse thermal data definitions out of the + device tree blob. + + Say 'Y' here if you need to build thermal infrastructure + based on device tree. + choice prompt "Default Thermal governor" default THERMAL_DEFAULT_GOV_STEP_WISE diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index db989e9..71f8eef 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -7,6 +7,7 @@ thermal_sys-y += thermal_core.o
# interface to/from other layers providing sensors thermal_sys-$(CONFIG_THERMAL_HWMON) += thermal_hwmon.o +thermal_sys-$(CONFIG_THERMAL_OF) += of-thermal.o
# governors thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += fair_share.o diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c new file mode 100644 index 0000000..04b1be7 --- /dev/null +++ b/drivers/thermal/of-thermal.c @@ -0,0 +1,849 @@ +/* + * of-thermal.c - Generic Thermal Management device tree support. + * + * Copyright (C) 2013 Texas Instruments + * Copyright (C) 2013 Eduardo Valentin eduardo.valentin@ti.com + * + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ +#include <linux/thermal.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#include <linux/err.h> +#include <linux/export.h> +#include <linux/string.h> + +#include "thermal_core.h" + +/*** Private data structures to represent thermal device tree data ***/ + +/** + * struct __thermal_trip - representation of a point in temperature domain + * @np: pointer to struct device_node that this trip point was created from + * @temperature: temperature value in miliCelsius + * @hysteresis: relative hysteresis in miliCelsius + * @type: trip point type + */ + +struct __thermal_trip { + struct device_node *np; + unsigned long int temperature; + unsigned long int hysteresis; + enum thermal_trip_type type; +}; + +/** + * struct __thermal_bind_param - a match between trip and cooling device + * @cooling_device: a pointer to identify the referred cooling device + * @trip_id: the trip point index + * @usage: the percentage (from 0 to 100) of cooling contribution + * @min: minimum cooling state used at this trip point + * @max: maximum cooling state used at this trip point + */ + +struct __thermal_bind_params { + struct device_node *cooling_device; + unsigned int trip_id; + unsigned int usage; + unsigned long min; + unsigned long max; +}; + +/** + * struct __thermal_zone - internal representation of a thermal zone + * @mode: current thermal zone device mode (enabled/disabled) + * @passive_delay: polling interval while passive cooling is activated + * @polling_delay: zone polling interval + * @ntrips: number of trip points + * @trips: an array of trip points (0..ntrips - 1) + * @num_tbps: number of thermal bind params + * @tbps: an array of thermal bind params (0..num_tbps - 1) + * @sensor_data: sensor private data used while reading temperature and trend + * @get_temp: sensor callback to read temperature + * @get_trend: sensor callback to read temperature trend + */ + +struct __thermal_zone { + enum thermal_device_mode mode; + int passive_delay; + int polling_delay; + + /* trip data */ + int ntrips; + struct __thermal_trip *trips; + + /* cooling binding data */ + int num_tbps; + struct __thermal_bind_params *tbps; + + /* sensor interface */ + void *sensor_data; + int (*get_temp)(void *, long *); + int (*get_trend)(void *, long *); +}; + +/*** DT thermal zone device callbacks ***/ + +static int of_thermal_get_temp(struct thermal_zone_device *tz, + unsigned long *temp) +{ + struct __thermal_zone *data = tz->devdata; + + if (!data->get_temp) + return -EINVAL; + + return data->get_temp(data->sensor_data, temp); +} + +static int of_thermal_get_trend(struct thermal_zone_device *tz, int trip, + enum thermal_trend *trend) +{ + struct __thermal_zone *data = tz->devdata; + long dev_trend; + int r; + + if (!data->get_trend) + return -EINVAL; + + r = data->get_trend(data->sensor_data, &dev_trend); + if (r) + return r; + + /* TODO: These intervals might have some thresholds, but in core code */ + if (dev_trend > 0) + *trend = THERMAL_TREND_RAISING; + else if (dev_trend < 0) + *trend = THERMAL_TREND_DROPPING; + else + *trend = THERMAL_TREND_STABLE; + + return 0; +} + +static int of_thermal_bind(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev) +{ + struct __thermal_zone *data = thermal->devdata; + int i; + + if (!data || IS_ERR(data)) + return -ENODEV; + + /* find where to bind */ + for (i = 0; i < data->num_tbps; i++) { + struct __thermal_bind_params *tbp = data->tbps + i; + + if (tbp->cooling_device == cdev->np) { + int ret; + + ret = thermal_zone_bind_cooling_device(thermal, + tbp->trip_id, cdev, + tbp->min, + tbp->max); + if (ret) + return ret; + } + } + + return 0; +} + +static int of_thermal_unbind(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev) +{ + struct __thermal_zone *data = thermal->devdata; + int i; + + if (!data || IS_ERR(data)) + return -ENODEV; + + /* find where to unbind */ + for (i = 0; i < data->num_tbps; i++) { + struct __thermal_bind_params *tbp = data->tbps + i; + + if (tbp->cooling_device == cdev->np) { + int ret; + + ret = thermal_zone_unbind_cooling_device(thermal, + tbp->trip_id, cdev); + if (ret) + return ret; + } + } + + return 0; +} + +static int of_thermal_get_mode(struct thermal_zone_device *tz, + enum thermal_device_mode *mode) +{ + struct __thermal_zone *data = tz->devdata; + + *mode = data->mode; + + return 0; +} + +static int of_thermal_set_mode(struct thermal_zone_device *tz, + enum thermal_device_mode mode) +{ + struct __thermal_zone *data = tz->devdata; + + mutex_lock(&tz->lock); + + if (mode == THERMAL_DEVICE_ENABLED) + tz->polling_delay = data->polling_delay; + else + tz->polling_delay = 0; + + mutex_unlock(&tz->lock); + + data->mode = mode; + thermal_zone_device_update(tz); + + return 0; +} + +static int of_thermal_get_trip_type(struct thermal_zone_device *tz, int trip, + enum thermal_trip_type *type) +{ + struct __thermal_zone *data = tz->devdata; + + if (trip >= data->ntrips || trip < 0) + return -EDOM; + + *type = data->trips[trip].type; + + return 0; +} + +static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip, + unsigned long *temp) +{ + struct __thermal_zone *data = tz->devdata; + + if (trip >= data->ntrips || trip < 0) + return -EDOM; + + *temp = data->trips[trip].temperature; + + return 0; +} + +static int of_thermal_set_trip_temp(struct thermal_zone_device *tz, int trip, + unsigned long temp) +{ + struct __thermal_zone *data = tz->devdata; + + if (trip >= data->ntrips || trip < 0) + return -EDOM; + + /* thermal framework should take care of data->mask & (1 << trip) */ + data->trips[trip].temperature = temp; + + return 0; +} + +static int of_thermal_get_trip_hyst(struct thermal_zone_device *tz, int trip, + unsigned long *hyst) +{ + struct __thermal_zone *data = tz->devdata; + + if (trip >= data->ntrips || trip < 0) + return -EDOM; + + *hyst = data->trips[trip].hysteresis; + + return 0; +} + +static int of_thermal_set_trip_hyst(struct thermal_zone_device *tz, int trip, + unsigned long hyst) +{ + struct __thermal_zone *data = tz->devdata; + + if (trip >= data->ntrips || trip < 0) + return -EDOM; + + /* thermal framework should take care of data->mask & (1 << trip) */ + data->trips[trip].hysteresis = hyst; + + return 0; +} + +static int of_thermal_get_crit_temp(struct thermal_zone_device *tz, + unsigned long *temp) +{ + struct __thermal_zone *data = tz->devdata; + int i; + + for (i = 0; i < data->ntrips; i++) + if (data->trips[i].type == THERMAL_TRIP_CRITICAL) { + *temp = data->trips[i].temperature; + return 0; + } + + return -EINVAL; +} + +static struct thermal_zone_device_ops of_thermal_ops = { + .get_mode = of_thermal_get_mode, + .set_mode = of_thermal_set_mode, + + .get_trip_type = of_thermal_get_trip_type, + .get_trip_temp = of_thermal_get_trip_temp, + .set_trip_temp = of_thermal_set_trip_temp, + .get_trip_hyst = of_thermal_get_trip_hyst, + .set_trip_hyst = of_thermal_set_trip_hyst, + .get_crit_temp = of_thermal_get_crit_temp, + + .bind = of_thermal_bind, + .unbind = of_thermal_unbind, +}; + +/*** sensor API ***/ + +static struct thermal_zone_device * +thermal_zone_of_add_sensor(struct device_node *zone, + struct device_node *sensor, void *data, + int (*get_temp)(void *, long *), + int (*get_trend)(void *, long *)) +{ + struct thermal_zone_device *tzd; + struct __thermal_zone *tz; + + tzd = thermal_zone_get_zone_by_name(zone->name); + if (IS_ERR(tzd)) + return ERR_PTR(-EPROBE_DEFER); + + tz = tzd->devdata; + + mutex_lock(&tzd->lock); + tz->get_temp = get_temp; + tz->get_trend = get_trend; + tz->sensor_data = data; + + tzd->ops->get_temp = of_thermal_get_temp; + tzd->ops->get_trend = of_thermal_get_trend; + mutex_unlock(&tzd->lock); + + return tzd; +} + +/** + * thermal_zone_of_sensor_register - registers a sensor to a DT thermal zone + * @dev: a valid struct device pointer of a sensor device. Must contain + * a valid .of_node, for the sensor node. + * @sensor_id: a sensor identifier, in case the sensor IP has more + * than one sensors + * @data: a private pointer (owned by the caller) that will be passed + * back, when a temperature reading is needed. + * @get_temp: a pointer to a function that reads the sensor temperature. + * @get_trend: a pointer to a function that reads the sensor temperature trend. + * + * This function will search the list of thermal zones described in device + * tree and look for the zone that refer to the sensor device pointed by + * @dev->of_node as temperature providers. For the zone pointing to the + * sensor node, the sensor will be added to the DT thermal zone device. + * + * The thermal zone temperature is provided by the @get_temp function + * pointer. When called, it will have the private pointer @data back. + * + * The thermal zone temperature trend is provided by the @get_trend function + * pointer. When called, it will have the private pointer @data back. + * + * TODO: + * 01 - This function must enqueue the new sensor instead of using + * it as the only source of temperature values. + * + * 02 - There must be a way to match the sensor with all thermal zones + * that refer to it. + * + * Return: On success returns a valid struct thermal_zone_device, + * otherwise, it returns a corresponding ERR_PTR(). Caller must + * check the return value with help of IS_ERR() helper. + */ +struct thermal_zone_device * +thermal_zone_of_sensor_register(struct device *dev, int sensor_id, + void *data, int (*get_temp)(void *, long *), + int (*get_trend)(void *, long *)) +{ + struct device_node *np, *child, *sensor_np; + + np = of_find_node_by_name(NULL, "thermal-zones"); + if (!np) + return ERR_PTR(-ENODEV); + + if (!dev || !dev->of_node) + return ERR_PTR(-EINVAL); + + sensor_np = dev->of_node; + + for_each_child_of_node(np, child) { + struct of_phandle_args sensor_specs; + int ret, id; + + /* For now, thermal framework supports only 1 sensor per zone */ + ret = of_parse_phandle_with_args(child, "thermal-sensors", + "#thermal-sensor-cells", + 0, &sensor_specs); + if (ret) + continue; + + if (sensor_specs.args_count >= 1) { + id = sensor_specs.args[0]; + WARN(sensor_specs.args_count > 1, + "%s: too many cells in sensor specifier %d\n", + sensor_specs.np->name, sensor_specs.args_count); + } else { + id = 0; + } + + if (sensor_specs.np == sensor_np && id == sensor_id) { + of_node_put(np); + return thermal_zone_of_add_sensor(child, sensor_np, + data, + get_temp, + get_trend); + } + } + of_node_put(np); + + return ERR_PTR(-ENODEV); +} +EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_register); + +/** + * thermal_zone_of_sensor_unregister - unregisters a sensor from a DT thermal zone + * @dev: a valid struct device pointer of a sensor device. Must contain + * a valid .of_node, for the sensor node. + * @tzd: a pointer to struct thermal_zone_device where the sensor is registered. + * + * This function removes the sensor callbacks and private data from the + * thermal zone device registered with thermal_zone_of_sensor_register() + * API. It will also silent the zone by remove the .get_temp() and .get_trend() + * thermal zone device callbacks. + * + * TODO: When the support to several sensors per zone is added, this + * function must search the sensor list based on @dev parameter. + * + */ +void thermal_zone_of_sensor_unregister(struct device *dev, + struct thermal_zone_device *tzd) +{ + struct __thermal_zone *tz; + + if (!dev || !tzd || !tzd->devdata) + return; + + tz = tzd->devdata; + + /* no __thermal_zone, nothing to be done */ + if (!tz) + return; + + mutex_lock(&tzd->lock); + tzd->ops->get_temp = NULL; + tzd->ops->get_trend = NULL; + + tz->get_temp = NULL; + tz->get_trend = NULL; + tz->sensor_data = NULL; + mutex_unlock(&tzd->lock); +} +EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_unregister); + +/*** functions parsing device tree nodes ***/ + +/** + * thermal_of_populate_bind_params - parse and fill cooling map data + * @np: DT node containing a cooling-map node + * @__tbp: data structure to be filled with cooling map info + * @trips: array of thermal zone trip points + * @ntrips: number of trip points inside trips. + * + * This function parses a cooling-map type of node represented by + * @np parameter and fills the read data into @__tbp data structure. + * It needs the already parsed array of trip points of the thermal zone + * in consideration. + * + * Return: 0 on success, proper error code otherwise + */ +static int thermal_of_populate_bind_params(struct device_node *np, + struct __thermal_bind_params *__tbp, + struct __thermal_trip *trips, + int ntrips) +{ + struct of_phandle_args cooling_spec; + struct device_node *trip; + int ret, i; + u32 prop; + + /* Default weight. Usage is optional */ + __tbp->usage = 0; + ret = of_property_read_u32(np, "contribution", &prop); + if (ret == 0) + __tbp->usage = prop; + + trip = of_parse_phandle(np, "trip", 0); + if (!trip) { + pr_err("missing trip property\n"); + return -ENODEV; + } + + /* match using device_node */ + for (i = 0; i < ntrips; i++) + if (trip == trips[i].np) { + __tbp->trip_id = i; + break; + } + + if (i == ntrips) { + ret = -ENODEV; + goto end; + } + + ret = of_parse_phandle_with_args(np, "cooling-device", "#cooling-cells", + 0, &cooling_spec); + if (ret < 0) { + pr_err("missing cooling_device property\n"); + goto end; + } + __tbp->cooling_device = cooling_spec.np; + if (cooling_spec.args_count >= 2) { /* at least min and max */ + __tbp->min = cooling_spec.args[0]; + __tbp->max = cooling_spec.args[1]; + } else { + pr_err("wrong reference to cooling device, missing limits\n"); + } + +end: + of_node_put(trip); + + return ret; +} + +/** + * It maps 'enum thermal_trip_type' found in include/linux/thermal.h + * into the device tree binding of 'trip', property type. + */ +static const char * const trip_types[] = { + [THERMAL_TRIP_ACTIVE] = "active", + [THERMAL_TRIP_PASSIVE] = "passive", + [THERMAL_TRIP_HOT] = "hot", + [THERMAL_TRIP_CRITICAL] = "critical", +}; + +/** + * thermal_of_get_trip_type - Get phy mode for given device_node + * @np: Pointer to the given device_node + * @type: Pointer to resulting trip type + * + * The function gets trip type string from property 'type', + * and store its index in trip_types table in @type, + * + * Return: 0 on success, or errno in error case. + */ +static int thermal_of_get_trip_type(struct device_node *np, + enum thermal_trip_type *type) +{ + const char *t; + int err, i; + + err = of_property_read_string(np, "type", &t); + if (err < 0) + return err; + + for (i = 0; i < ARRAY_SIZE(trip_types); i++) + if (!strcasecmp(t, trip_types[i])) { + *type = i; + return 0; + } + + return -ENODEV; +} + +/** + * thermal_of_populate_trip - parse and fill one trip point data + * @np: DT node containing a trip point node + * @trip: trip point data structure to be filled up + * + * This function parses a trip point type of node represented by + * @np parameter and fills the read data into @trip data structure. + * + * Return: 0 on success, proper error code otherwise + */ +static int thermal_of_populate_trip(struct device_node *np, + struct __thermal_trip *trip) +{ + int prop; + int ret; + + ret = of_property_read_u32(np, "temperature", &prop); + if (ret < 0) { + pr_err("missing temperature property\n"); + return ret; + } + trip->temperature = prop; + + ret = of_property_read_u32(np, "hysteresis", &prop); + if (ret < 0) { + pr_err("missing hysteresis property\n"); + return ret; + } + trip->hysteresis = prop; + + ret = thermal_of_get_trip_type(np, &trip->type); + if (ret < 0) { + pr_err("wrong trip type property\n"); + return ret; + } + + /* Required for cooling map matching */ + trip->np = np; + + return 0; +} + +/** + * thermal_of_build_thermal_zone - parse and fill one thermal zone data + * @np: DT node containing a thermal zone node + * + * This function parses a thermal zone type of node represented by + * @np parameter and fills the read data into a __thermal_zone data structure + * and return this pointer. + * + * TODO: Missing properties to parse: thermal-sensor-names and coefficients + * + * Return: On success returns a valid struct __thermal_zone, + * otherwise, it returns a corresponding ERR_PTR(). Caller must + * check the return value with help of IS_ERR() helper. + */ +static struct __thermal_zone * +thermal_of_build_thermal_zone(struct device_node *np) +{ + struct device_node *child = NULL, *gchild; + struct __thermal_zone *tz; + int ret, i; + u32 prop; + + if (!np) { + pr_err("no thermal zone np\n"); + return ERR_PTR(-EINVAL); + } + + tz = kzalloc(sizeof(*tz), GFP_KERNEL); + if (!tz) + return ERR_PTR(-ENOMEM); + + ret = of_property_read_u32(np, "polling-delay-passive", &prop); + if (ret < 0) { + pr_err("missing polling-delay-passive property\n"); + goto free_tz; + } + tz->passive_delay = prop; + + ret = of_property_read_u32(np, "polling-delay", &prop); + if (ret < 0) { + pr_err("missing polling-delay property\n"); + goto free_tz; + } + tz->polling_delay = prop; + + /* trips */ + child = of_get_child_by_name(np, "trips"); + + /* No trips provided */ + if (!child) + goto finish; + + tz->ntrips = of_get_child_count(child); + if (tz->ntrips == 0) /* must have at least one child */ + goto finish; + + tz->trips = kzalloc(tz->ntrips * sizeof(*tz->trips), GFP_KERNEL); + if (!tz->trips) { + ret = -ENOMEM; + goto free_tz; + } + + i = 0; + for_each_child_of_node(child, gchild) { + ret = thermal_of_populate_trip(gchild, &tz->trips[i++]); + if (ret) + goto free_trips; + } + + of_node_put(child); + + /* cooling-maps */ + child = of_get_child_by_name(np, "cooling-maps"); + + /* cooling-maps not provided */ + if (!child) + goto finish; + + tz->num_tbps = of_get_child_count(child); + if (tz->num_tbps == 0) + goto finish; + + tz->tbps = kzalloc(tz->num_tbps * sizeof(*tz->tbps), GFP_KERNEL); + if (!tz->tbps) { + ret = -ENOMEM; + goto free_trips; + } + + i = 0; + for_each_child_of_node(child, gchild) + ret = thermal_of_populate_bind_params(gchild, &tz->tbps[i++], + tz->trips, tz->ntrips); + if (ret) + goto free_tbps; + +finish: + of_node_put(child); + tz->mode = THERMAL_DEVICE_DISABLED; + + return tz; + +free_tbps: + kfree(tz->tbps); +free_trips: + kfree(tz->trips); +free_tz: + kfree(tz); + of_node_put(child); + + return ERR_PTR(ret); +} + +static inline void of_thermal_free_zone(struct __thermal_zone *tz) +{ + kfree(tz->tbps); + kfree(tz->trips); + kfree(tz); +} + +/** + * of_parse_thermal_zones - parse device tree thermal data + * + * Initialization function that can be called by machine initialization + * code to parse thermal data and populate the thermal framework + * with hardware thermal zones info. This function only parses thermal zones. + * Cooling devices and sensor devices nodes are supposed to be parsed + * by their respective drivers. + * + * Return: 0 on success, proper error code otherwise + * + */ +int __init of_parse_thermal_zones(void) +{ + struct device_node *np, *child; + struct __thermal_zone *tz; + struct thermal_zone_device_ops *ops; + + np = of_find_node_by_name(NULL, "thermal-zones"); + if (!np) { + pr_debug("unable to find thermal zones\n"); + return 0; /* Run successfully on systems without thermal DT */ + } + + for_each_child_of_node(np, child) { + struct thermal_zone_device *zone; + struct thermal_zone_params *tzp; + + tz = thermal_of_build_thermal_zone(child); + if (IS_ERR(tz)) { + pr_err("failed to build thermal zone %s: %ld\n", + child->name, + PTR_ERR(tz)); + continue; + } + + ops = kmemdup(&of_thermal_ops, sizeof(*ops), GFP_KERNEL); + if (!ops) + goto exit_free; + + tzp = kzalloc(sizeof(*tzp), GFP_KERNEL); + if (!tzp) { + kfree(ops); + goto exit_free; + } + + /* No hwmon because there might be hwmon drivers registering */ + tzp->no_hwmon = true; + + zone = thermal_zone_device_register(child->name, tz->ntrips, + 0, tz, + ops, tzp, + tz->passive_delay, + tz->polling_delay); + if (IS_ERR(zone)) { + pr_err("Failed to build %s zone %ld\n", child->name, + PTR_ERR(zone)); + kfree(tzp); + kfree(ops); + of_thermal_free_zone(tz); + /* attempting to build remaining zones still */ + } + } + + return 0; + +exit_free: + of_thermal_free_zone(tz); + + /* no memory available, so free what we have built */ + of_thermal_destroy_zones(); + + return -ENOMEM; +} + +/** + * of_thermal_destroy_zones - remove all zones parsed and allocated resources + * + * Finds all zones parsed and added to the thermal framework and remove them + * from the system, together with their resources. + * + */ +void of_thermal_destroy_zones(void) +{ + struct device_node *np, *child; + + np = of_find_node_by_name(NULL, "thermal-zones"); + if (!np) { + pr_err("unable to find thermal zones\n"); + return; + } + + for_each_child_of_node(np, child) { + struct thermal_zone_device *zone; + + zone = thermal_zone_get_zone_by_name(child->name); + if (IS_ERR(zone)) + continue; + + thermal_zone_device_unregister(zone); + kfree(zone->tzp); + kfree(zone->ops); + of_thermal_free_zone(zone->devdata); + } +} diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 4f4b788..ed5f765 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -1355,7 +1355,7 @@ static void remove_trip_attrs(struct thermal_zone_device *tz) */ struct thermal_zone_device *thermal_zone_device_register(const char *type, int trips, int mask, void *devdata, - const struct thermal_zone_device_ops *ops, + struct thermal_zone_device_ops *ops, const struct thermal_zone_params *tzp, int passive_delay, int polling_delay) { @@ -1735,8 +1735,14 @@ static int __init thermal_init(void) if (result) goto unregister_class;
+ result = of_parse_thermal_zones(); + if (result) + goto exit_netlink; + return 0;
+exit_netlink: + genetlink_exit(); unregister_governors: thermal_unregister_governors(); unregister_class: @@ -1752,6 +1758,7 @@ error:
static void __exit thermal_exit(void) { + of_thermal_destroy_zones(); genetlink_exit(); class_unregister(&thermal_class); thermal_unregister_governors(); diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index 7cf2f66..3db339f 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -77,4 +77,13 @@ static inline int thermal_gov_user_space_register(void) { return 0; } static inline void thermal_gov_user_space_unregister(void) {} #endif /* CONFIG_THERMAL_GOV_USER_SPACE */
+/* device tree support */ +#ifdef CONFIG_THERMAL_OF +int of_parse_thermal_zones(void); +void of_thermal_destroy_zones(void); +#else +static inline int of_parse_thermal_zones(void) { return 0; } +static inline void of_thermal_destroy_zones(void) { } +#endif + #endif /* __THERMAL_CORE_H__ */ diff --git a/include/dt-bindings/thermal/thermal.h b/include/dt-bindings/thermal/thermal.h new file mode 100644 index 0000000..59822a9 --- /dev/null +++ b/include/dt-bindings/thermal/thermal.h @@ -0,0 +1,17 @@ +/* + * This header provides constants for most thermal bindings. + * + * Copyright (C) 2013 Texas Instruments + * Eduardo Valentin eduardo.valentin@ti.com + * + * GPLv2 only + */ + +#ifndef _DT_BINDINGS_THERMAL_THERMAL_H +#define _DT_BINDINGS_THERMAL_THERMAL_H + +/* On cooling devices upper and lower limits */ +#define THERMAL_NO_LIMIT (-1UL) + +#endif + diff --git a/include/linux/thermal.h b/include/linux/thermal.h index b4a975f..bd2533b 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -143,6 +143,7 @@ struct thermal_cooling_device { int id; char type[THERMAL_NAME_LENGTH]; struct device device; + struct device_node *np; void *devdata; const struct thermal_cooling_device_ops *ops; bool updated; /* true if the cooling device does not need update */ @@ -172,7 +173,7 @@ struct thermal_zone_device { int emul_temperature; int passive; unsigned int forced_passive; - const struct thermal_zone_device_ops *ops; + struct thermal_zone_device_ops *ops; const struct thermal_zone_params *tzp; struct thermal_governor *governor; struct list_head thermal_instances; @@ -232,8 +233,31 @@ struct thermal_genl_event { };
/* Function declarations */ +#ifdef CONFIG_THERMAL_OF +struct thermal_zone_device * +thermal_zone_of_sensor_register(struct device *dev, int id, + void *data, int (*get_temp)(void *, long *), + int (*get_trend)(void *, long *)); +void thermal_zone_of_sensor_unregister(struct device *dev, + struct thermal_zone_device *tz); +#else +static inline struct thermal_zone_device * +thermal_zone_of_sensor_register(struct device *dev, int id, + void *data, int (*get_temp)(void *, long *), + int (*get_trend)(void *, long *)) +{ + return NULL; +} + +static inline +void thermal_zone_of_sensor_unregister(struct device *dev, + struct thermal_zone_device *tz) +{ +} + +#endif struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, - void *, const struct thermal_zone_device_ops *, + void *, struct thermal_zone_device_ops *, const struct thermal_zone_params *, int, int); void thermal_zone_device_unregister(struct thermal_zone_device *);
From: Eduardo Valentin eduardo.valentin@ti.com
This patch adds a new API to allow registering cooling devices in the thermal framework derived from device tree nodes.
This API links the cooling device with the device tree node so that binding with thermal zones is possible, given that thermal zones are pointing to cooling device device tree nodes.
Cc: Zhang Rui rui.zhang@intel.com Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin eduardo.valentin@ti.com (cherry picked from commit a116b5d44f144586ef03a93f14ddc63f4a85e906)
Signed-off-by: Alex Shi alex.shi@linaro.org
Conflicts: drivers/thermal/thermal_core.c --- drivers/thermal/thermal_core.c | 59 +++++++++++++++++++++++++++++++++++++++--- include/linux/thermal.h | 4 +++ 2 files changed, 59 insertions(+), 4 deletions(-)
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index ed5f765..916bde1 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -33,6 +33,8 @@ #include <linux/idr.h> #include <linux/thermal.h> #include <linux/reboot.h> +#include <linux/string.h> +#include <linux/of.h> #include <net/netlink.h> #include <net/genetlink.h>
@@ -1037,7 +1039,8 @@ static struct class thermal_class = { };
/** - * thermal_cooling_device_register() - register a new thermal cooling device + * __thermal_cooling_device_register() - register a new thermal cooling device + * @np: a pointer to a device tree node. * @type: the thermal cooling device type. * @devdata: device private data. * @ops: standard thermal cooling devices callbacks. @@ -1045,13 +1048,16 @@ static struct class thermal_class = { * This interface function adds a new thermal cooling device (fan/processor/...) * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself * to all the thermal zone devices registered at the same time. + * It also gives the opportunity to link the cooling device to a device tree + * node, so that it can be bound to a thermal zone created out of device tree. * * Return: a pointer to the created struct thermal_cooling_device or an * ERR_PTR. Caller must check return value with IS_ERR*() helpers. */ -struct thermal_cooling_device * -thermal_cooling_device_register(char *type, void *devdata, - const struct thermal_cooling_device_ops *ops) +static struct thermal_cooling_device * +__thermal_cooling_device_register(struct device_node *np, + char *type, void *devdata, + const struct thermal_cooling_device_ops *ops) { struct thermal_cooling_device *cdev; int result; @@ -1076,6 +1082,7 @@ thermal_cooling_device_register(char *type, void *devdata, strlcpy(cdev->type, type ? : "", sizeof(cdev->type)); mutex_init(&cdev->lock); INIT_LIST_HEAD(&cdev->thermal_instances); + cdev->np = np; cdev->ops = ops; cdev->updated = true; cdev->device.class = &thermal_class; @@ -1118,9 +1125,53 @@ unregister: device_unregister(&cdev->device); return ERR_PTR(result); } + +/** + * thermal_cooling_device_register() - register a new thermal cooling device + * @type: the thermal cooling device type. + * @devdata: device private data. + * @ops: standard thermal cooling devices callbacks. + * + * This interface function adds a new thermal cooling device (fan/processor/...) + * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself + * to all the thermal zone devices registered at the same time. + * + * Return: a pointer to the created struct thermal_cooling_device or an + * ERR_PTR. Caller must check return value with IS_ERR*() helpers. + */ +struct thermal_cooling_device * +thermal_cooling_device_register(char *type, void *devdata, + const struct thermal_cooling_device_ops *ops) +{ + return __thermal_cooling_device_register(NULL, type, devdata, ops); +} EXPORT_SYMBOL_GPL(thermal_cooling_device_register);
/** + * thermal_of_cooling_device_register() - register an OF thermal cooling device + * @np: a pointer to a device tree node. + * @type: the thermal cooling device type. + * @devdata: device private data. + * @ops: standard thermal cooling devices callbacks. + * + * This function will register a cooling device with device tree node reference. + * This interface function adds a new thermal cooling device (fan/processor/...) + * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself + * to all the thermal zone devices registered at the same time. + * + * Return: a pointer to the created struct thermal_cooling_device or an + * ERR_PTR. Caller must check return value with IS_ERR*() helpers. + */ +struct thermal_cooling_device * +thermal_of_cooling_device_register(struct device_node *np, + char *type, void *devdata, + const struct thermal_cooling_device_ops *ops) +{ + return __thermal_cooling_device_register(np, type, devdata, ops); +} +EXPORT_SYMBOL_GPL(thermal_of_cooling_device_register); + +/** * thermal_cooling_device_unregister - removes the registered thermal cooling device * @cdev: the thermal cooling device to remove. * diff --git a/include/linux/thermal.h b/include/linux/thermal.h index bd2533b..55fce47 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -25,6 +25,7 @@ #ifndef __THERMAL_H__ #define __THERMAL_H__
+#include <linux/of.h> #include <linux/idr.h> #include <linux/device.h> #include <linux/workqueue.h> @@ -270,6 +271,9 @@ void thermal_zone_device_update(struct thermal_zone_device *);
struct thermal_cooling_device *thermal_cooling_device_register(char *, void *, const struct thermal_cooling_device_ops *); +struct thermal_cooling_device * +thermal_of_cooling_device_register(struct device_node *np, char *, void *, + const struct thermal_cooling_device_ops *); void thermal_cooling_device_unregister(struct thermal_cooling_device *); struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name); int thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned long *temp);
From: Eduardo Valentin eduardo.valentin@ti.com
This patch introduces an API to register cpufreq cooling device based on device tree node.
The registration via device tree node differs from normal registration due to the fact that it is needed to fill the device_node structure in order to be able to match the cooling devices with trip points.
Cc: Zhang Rui rui.zhang@intel.com Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin eduardo.valentin@ti.com (cherry picked from commit 39d99cff76bf2992fd6dd4b1fc62da139e62e90c)
Signed-off-by: Alex Shi alex.shi@linaro.org
Conflicts: drivers/thermal/Kconfig drivers/thermal/cpu_cooling.c --- drivers/thermal/Kconfig | 1 + drivers/thermal/cpu_cooling.c | 58 +++++++++++++++++++++++++++++++++++++------ include/linux/cpu_cooling.h | 25 +++++++++++++++++++ 3 files changed, 77 insertions(+), 7 deletions(-)
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 3630c07..e92e1dc 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -91,6 +91,7 @@ config THERMAL_GOV_USER_SPACE config CPU_THERMAL bool "generic cpu cooling support" depends on CPU_FREQ + depends on THERMAL_OF select CPU_FREQ_TABLE help This implements the generic cpu cooling mechanism through frequency diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index c94bf2e..78de794 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -415,18 +415,21 @@ static struct notifier_block thermal_cpufreq_notifier_block = { };
/** - * cpufreq_cooling_register - function to create cpufreq cooling device. + * __cpufreq_cooling_register - helper function to create cpufreq cooling device + * @np: a valid struct device_node to the cooling device device tree node * @clip_cpus: cpumask of cpus where the frequency constraints will happen. * * This interface function registers the cpufreq cooling device with the name * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq - * cooling devices. + * cooling devices. It also gives the opportunity to link the cooling device + * with a device tree node, in order to bind it via the thermal DT code. * * Return: a valid struct thermal_cooling_device pointer on success, * on failure, it returns a corresponding ERR_PTR(). */ -struct thermal_cooling_device * -cpufreq_cooling_register(const struct cpumask *clip_cpus) +static struct thermal_cooling_device * +__cpufreq_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus) { struct thermal_cooling_device *cool_dev; struct cpufreq_cooling_device *cpufreq_dev = NULL; @@ -465,9 +468,9 @@ cpufreq_cooling_register(const struct cpumask *clip_cpus) snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d", cpufreq_dev->id);
- cool_dev = thermal_cooling_device_register(dev_name, cpufreq_dev, - &cpufreq_cooling_ops); - if (!cool_dev) { + cool_dev = thermal_of_cooling_device_register(np, dev_name, cpufreq_dev, + &cpufreq_cooling_ops); + if (IS_ERR(cool_dev)) { release_idr(&cpufreq_idr, cpufreq_dev->id); kfree(cpufreq_dev); return ERR_PTR(-EINVAL); @@ -486,9 +489,50 @@ cpufreq_cooling_register(const struct cpumask *clip_cpus)
return cool_dev; } + +/** + * cpufreq_cooling_register - function to create cpufreq cooling device. + * @clip_cpus: cpumask of cpus where the frequency constraints will happen. + * + * This interface function registers the cpufreq cooling device with the name + * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq + * cooling devices. + * + * Return: a valid struct thermal_cooling_device pointer on success, + * on failure, it returns a corresponding ERR_PTR(). + */ +struct thermal_cooling_device * +cpufreq_cooling_register(const struct cpumask *clip_cpus) +{ + return __cpufreq_cooling_register(NULL, clip_cpus); +} EXPORT_SYMBOL_GPL(cpufreq_cooling_register);
/** + * of_cpufreq_cooling_register - function to create cpufreq cooling device. + * @np: a valid struct device_node to the cooling device device tree node + * @clip_cpus: cpumask of cpus where the frequency constraints will happen. + * + * This interface function registers the cpufreq cooling device with the name + * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq + * cooling devices. Using this API, the cpufreq cooling device will be + * linked to the device tree node provided. + * + * Return: a valid struct thermal_cooling_device pointer on success, + * on failure, it returns a corresponding ERR_PTR(). + */ +struct thermal_cooling_device * +of_cpufreq_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus) +{ + if (!np) + return ERR_PTR(-EINVAL); + + return __cpufreq_cooling_register(np, clip_cpus); +} +EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register); + +/** * cpufreq_cooling_unregister - function to remove cpufreq cooling device. * @cdev: thermal cooling device pointer. * diff --git a/include/linux/cpu_cooling.h b/include/linux/cpu_cooling.h index a5d52ee..c303d38 100644 --- a/include/linux/cpu_cooling.h +++ b/include/linux/cpu_cooling.h @@ -24,6 +24,7 @@ #ifndef __CPU_COOLING_H__ #define __CPU_COOLING_H__
+#include <linux/of.h> #include <linux/thermal.h> #include <linux/cpumask.h>
@@ -36,6 +37,24 @@ struct thermal_cooling_device * cpufreq_cooling_register(const struct cpumask *clip_cpus);
/** + * of_cpufreq_cooling_register - create cpufreq cooling device based on DT. + * @np: a valid struct device_node to the cooling device device tree node. + * @clip_cpus: cpumask of cpus where the frequency constraints will happen + */ +#ifdef CONFIG_THERMAL_OF +struct thermal_cooling_device * +of_cpufreq_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus); +#else +static inline struct thermal_cooling_device * +of_cpufreq_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus) +{ + return NULL; +} +#endif + +/** * cpufreq_cooling_unregister - function to remove cpufreq cooling device. * @cdev: thermal cooling device pointer. */ @@ -48,6 +67,12 @@ cpufreq_cooling_register(const struct cpumask *clip_cpus) { return NULL; } +static inline struct thermal_cooling_device * +of_cpufreq_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus) +{ + return NULL; +} static inline void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) {
From: Eduardo Valentin eduardo.valentin@ti.com
This patch adds to lm75 temperature sensor the possibility to expose itself as thermal zone device, registered on the thermal framework.
The thermal zone is built only if a device tree node describing a thermal zone for this sensor is present inside the lm75 DT node. Otherwise, the driver behavior will be the same.
Note: This patch has also been reviewed by Jean D. He has requested to perform a wider inspection of possible users of thermal and hwmon interaction API. On the other hand, the change on this patch is acceptable on first step of overall code change.
Cc: Jean Delvare khali@linux-fr.org Cc: lm-sensors@lm-sensors.org Cc: linux-kernel@vger.kernel.org Acked-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Eduardo Valentin eduardo.valentin@ti.com (cherry picked from commit 22e731838b0e337fed5f16c67aa0b954028dfe93)
Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/hwmon/lm75.c | 35 ++++++++++++++++++++++++++++++----- 1 file changed, 30 insertions(+), 5 deletions(-)
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index c03b490..1d3600a 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -27,6 +27,8 @@ #include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> +#include <linux/of.h> +#include <linux/thermal.h> #include "lm75.h"
@@ -70,6 +72,7 @@ static const u8 LM75_REG_TEMP[3] = { /* Each client has this additional data */ struct lm75_data { struct device *hwmon_dev; + struct thermal_zone_device *tz; struct mutex update_lock; u8 orig_conf; u8 resolution; /* In bits, between 9 and 12 */ @@ -90,22 +93,36 @@ static struct lm75_data *lm75_update_device(struct device *dev);
/*-----------------------------------------------------------------------*/
+static inline long lm75_reg_to_mc(s16 temp, u8 resolution) +{ + return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); +} + /* sysfs attributes for hwmon */
+static int lm75_read_temp(void *dev, long *temp) +{ + struct lm75_data *data = lm75_update_device(dev); + + if (IS_ERR(data)) + return PTR_ERR(data); + + *temp = lm75_reg_to_mc(data->temp[0], data->resolution); + + return 0; +} + static ssize_t show_temp(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct lm75_data *data = lm75_update_device(dev); - long temp;
if (IS_ERR(data)) return PTR_ERR(data);
- temp = ((data->temp[attr->index] >> (16 - data->resolution)) * 1000) - >> (data->resolution - 8); - - return sprintf(buf, "%ld\n", temp); + return sprintf(buf, "%ld\n", lm75_reg_to_mc(data->temp[attr->index], + data->resolution)); }
static ssize_t set_temp(struct device *dev, struct device_attribute *da, @@ -271,6 +288,13 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) goto exit_remove; }
+ data->tz = thermal_zone_of_sensor_register(&client->dev, + 0, + &client->dev, + lm75_read_temp, NULL); + if (IS_ERR(data->tz)) + data->tz = NULL; + dev_info(&client->dev, "%s: sensor '%s'\n", dev_name(data->hwmon_dev), client->name);
@@ -285,6 +309,7 @@ static int lm75_remove(struct i2c_client *client) { struct lm75_data *data = i2c_get_clientdata(client);
+ thermal_zone_of_sensor_unregister(&client->dev, data->tz); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm75_group); lm75_write_value(client, LM75_REG_CONF, data->orig_conf);
From: Eduardo Valentin eduardo.valentin@ti.com
This patch adds to tmp102 temperature sensor the possibility to expose itself as thermal zone device, registered on the thermal framework.
The thermal zone is built only if a device tree node describing a thermal zone for this sensor is present inside the tmp102 DT node. Otherwise, the driver behavior will be the same.
Note: This patch has also been reviewed by Jean D. He has requested to perform a wider inspection of possible users of thermal and hwmon interaction API. On the other hand, the change on this patch is acceptable on first step of overall code change.
Cc: Jean Delvare khali@linux-fr.org Cc: lm-sensors@lm-sensors.org Cc: linux-kernel@vger.kernel.org Acked-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Eduardo Valentin eduardo.valentin@ti.com (cherry picked from commit 6a027523f30f1cc90037686e6a682d15c6a555d6)
Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/hwmon/tmp102.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c index d7b47ab..6748b45 100644 --- a/drivers/hwmon/tmp102.c +++ b/drivers/hwmon/tmp102.c @@ -27,6 +27,8 @@ #include <linux/mutex.h> #include <linux/device.h> #include <linux/jiffies.h> +#include <linux/thermal.h> +#include <linux/of.h>
#define DRIVER_NAME "tmp102"
@@ -50,6 +52,7 @@
struct tmp102 { struct device *hwmon_dev; + struct thermal_zone_device *tz; struct mutex lock; u16 config_orig; unsigned long last_update; @@ -93,6 +96,15 @@ static struct tmp102 *tmp102_update_device(struct i2c_client *client) return tmp102; }
+static int tmp102_read_temp(void *dev, long *temp) +{ + struct tmp102 *tmp102 = tmp102_update_device(to_i2c_client(dev)); + + *temp = tmp102->temp[0]; + + return 0; +} + static ssize_t tmp102_show_temp(struct device *dev, struct device_attribute *attr, char *buf) @@ -204,6 +216,12 @@ static int tmp102_probe(struct i2c_client *client, goto fail_remove_sysfs; }
+ tmp102->tz = thermal_zone_of_sensor_register(&client->dev, 0, + &client->dev, + tmp102_read_temp, NULL); + if (IS_ERR(tmp102->tz)) + tmp102->tz = NULL; + dev_info(&client->dev, "initialized\n");
return 0; @@ -220,6 +238,7 @@ static int tmp102_remove(struct i2c_client *client) { struct tmp102 *tmp102 = i2c_get_clientdata(client);
+ thermal_zone_of_sensor_unregister(&client->dev, tmp102->tz); hwmon_device_unregister(tmp102->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group);
From: Eduardo Valentin eduardo.valentin@ti.com
After discussion and agreement of thermal device tree bindings, it is desirable to properly maintain thermal bindings for existing and upcoming devices.
As original author of thermal device tree bindings, I am volunteering to maintain them. This then adds and entry for device tree bindings under thermal domain.
Cc: Rob Herring rob.herring@calxeda.com Cc: Pawel Moll pawel.moll@arm.com Cc: Mark Rutland mark.rutland@arm.com Cc: Stephen Warren swarren@wwwdotorg.org Cc: Ian Campbell ijc+devicetree@hellion.org.uk Signed-off-by: Eduardo Valentin eduardo.valentin@ti.com (cherry picked from commit 1beabfbea3a8648575afe04f6f3ddf107c240fb0)
Signed-off-by: Alex Shi alex.shi@linaro.org --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+)
diff --git a/MAINTAINERS b/MAINTAINERS index 48c7480..0c204dd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8073,6 +8073,7 @@ S: Supported F: drivers/thermal/ F: include/linux/thermal.h F: include/linux/cpu_cooling.h +F: Documentation/devicetree/bindings/thermal/
THINGM BLINK(1) USB RGB LED DRIVER M: Vivien Didelot vivien.didelot@savoirfairelinux.com
From: Aaron Lu aaron.lu@intel.com
To ease debugging thermal problem, add these dynamic debug statements so that user do not need rebuild kernel to see these info.
Based on a patch from Zhang Rui for debugging on bugzilla: https://bugzilla.kernel.org/attachment.cgi?id=98671
A sample output after we turn on dynamic debug with the following cmd: is like:
[ 355.147627] update_temperature: thermal thermal_zone0: last_temperature=52000, current_temperature=55000 [ 355.147636] thermal_zone_trip_update: thermal thermal_zone0: Trip1[type=1,temp=79000]:trend=2,throttle=0 [ 355.147644] get_target_state: thermal cooling_device8: cur_state=0 [ 355.147647] thermal_zone_trip_update: thermal cooling_device8: old_target=-1, target=-1 [ 355.147652] get_target_state: thermal cooling_device7: cur_state=0 [ 355.147655] thermal_zone_trip_update: thermal cooling_device7: old_target=-1, target=-1 [ 355.147660] get_target_state: thermal cooling_device6: cur_state=0 [ 355.147663] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1 [ 355.147668] get_target_state: thermal cooling_device5: cur_state=0 [ 355.147671] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1 [ 355.147678] thermal_zone_trip_update: thermal thermal_zone0: Trip2[type=0,temp=90000]:trend=1,throttle=0 [ 355.147776] get_target_state: thermal cooling_device0: cur_state=0 [ 355.147783] thermal_zone_trip_update: thermal cooling_device0: old_target=-1, target=-1 [ 355.147792] thermal_zone_trip_update: thermal thermal_zone0: Trip3[type=0,temp=80000]:trend=1,throttle=0 [ 355.147845] get_target_state: thermal cooling_device1: cur_state=0 [ 355.147849] thermal_zone_trip_update: thermal cooling_device1: old_target=-1, target=-1 [ 355.147856] thermal_zone_trip_update: thermal thermal_zone0: Trip4[type=0,temp=70000]:trend=1,throttle=0 [ 355.147904] get_target_state: thermal cooling_device2: cur_state=0 [ 355.147908] thermal_zone_trip_update: thermal cooling_device2: old_target=-1, target=-1 [ 355.147915] thermal_zone_trip_update: thermal thermal_zone0: Trip5[type=0,temp=60000]:trend=1,throttle=0 [ 355.147963] get_target_state: thermal cooling_device3: cur_state=0 [ 355.147967] thermal_zone_trip_update: thermal cooling_device3: old_target=-1, target=-1 [ 355.147973] thermal_zone_trip_update: thermal thermal_zone0: Trip6[type=0,temp=55000]:trend=1,throttle=1 [ 355.148022] get_target_state: thermal cooling_device4: cur_state=0 [ 355.148025] thermal_zone_trip_update: thermal cooling_device4: old_target=-1, target=1 [ 355.148036] thermal_cdev_update: thermal cooling_device4: zone0->target=1 [ 355.169279] thermal_cdev_update: thermal cooling_device4: set to state 1
Signed-off-by: Aaron Lu aaron.lu@intel.com Acked-by: Eduardo Valentin eduardo.valentin@ti.com Signed-off-by: Zhang Rui rui.zhang@intel.com (cherry picked from commit 06475b556cb4863cf1dcace9b2d21dac1fc74daf)
Signed-off-by: Alex Shi alex.shi@linaro.org
Conflicts: drivers/thermal/step_wise.c --- drivers/thermal/step_wise.c | 6 ++++++ drivers/thermal/thermal_core.c | 6 ++++++ 2 files changed, 12 insertions(+)
diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c index 4d4ddae..c83a309 100644 --- a/drivers/thermal/step_wise.c +++ b/drivers/thermal/step_wise.c @@ -53,6 +53,7 @@ static unsigned long get_target_state(struct thermal_instance *instance, unsigned long cur_state;
cdev->ops->get_cur_state(cdev, &cur_state); + dev_dbg(&cdev->device, "cur_state=%ld\n", cur_state);
switch (trend) { case THERMAL_TREND_RAISING: @@ -124,6 +125,9 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) if (tz->temperature >= trip_temp) throttle = true;
+ dev_dbg(&tz->device, "Trip%d[type=%d,temp=%ld]:trend=%d,throttle=%d\n", + trip, trip_type, trip_temp, trend, throttle); + mutex_lock(&tz->lock);
list_for_each_entry(instance, &tz->thermal_instances, tz_node) { @@ -132,6 +136,8 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
old_target = instance->target; instance->target = get_target_state(instance, trend, throttle); + dev_dbg(&instance->cdev->device, "old_target=%d, target=%d\n", + old_target, (int)instance->target);
/* Activate a passive thermal instance */ if (old_target == THERMAL_NO_TARGET && diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 916bde1..83cc99b 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -438,6 +438,9 @@ static void update_temperature(struct thermal_zone_device *tz) tz->last_temperature = tz->temperature; tz->temperature = temp; mutex_unlock(&tz->lock); + + dev_dbg(&tz->device, "last_temperature=%d, current_temperature=%d\n", + tz->last_temperature, tz->temperature); }
void thermal_zone_device_update(struct thermal_zone_device *tz) @@ -1243,6 +1246,8 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev) mutex_lock(&cdev->lock); /* Make sure cdev enters the deepest cooling state */ list_for_each_entry(instance, &cdev->thermal_instances, cdev_node) { + dev_dbg(&cdev->device, "zone%d->target=%lu\n", + instance->tz->id, instance->target); if (instance->target == THERMAL_NO_TARGET) continue; if (instance->target > target) @@ -1251,6 +1256,7 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev) mutex_unlock(&cdev->lock); cdev->ops->set_cur_state(cdev, target); cdev->updated = true; + dev_dbg(&cdev->device, "set to state %lu\n", target); } EXPORT_SYMBOL(thermal_cdev_update);
linaro-kernel@lists.linaro.org