Automated DT boot report for various ARM defconfigs.
Tree/Branch: next Git describe: next-20140313 Failed boot tests (console logs at the end) =========================================== da850-evm: FAIL: da8xx_omapl_defconfig legacy,3730xm: FAIL: omap2plus_defconfig legacy,3530beagle: FAIL: omap2plus_defconfig legacy,3730storm: FAIL: omap2plus_defconfig legacy,3530overo: FAIL: omap2plus_defconfig sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig legacy,dm365evm: FAIL: davinci_all_defconfig
Full Report ===========
da8xx_omapl_defconfig --------------------- da850-evm FAIL: 0 min 21.2 sec
omap2plus_defconfig ------------------- legacy,3730xm FAIL: 0 min 42.5 sec am335x-boneblack PASS: 0 min 26.4 sec omap3-beagle-xm PASS: 1 min 1.4 sec legacy,3530beagle FAIL: 0 min 41.0 sec omap4-panda PASS: 1 min 8.6 sec omap3-overo-tobi PASS: 0 min 23.2 sec am335x-bone PASS: 0 min 28.0 sec omap3-overo-storm-tobi PASS: 0 min 24.6 sec omap5-uevm PASS: 1 min 3.2 sec omap4-panda-es PASS: 1 min 11.4 sec legacy,3730storm FAIL: 0 min 27.6 sec legacy,3530overo FAIL: 0 min 26.2 sec
multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 46.7 sec sun7i-a20-cubieboard2 FAIL: 0 min 20.1 sec
tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.3 sec
imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.1 sec imx6q-wandboard PASS: 0 min 17.8 sec
sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 18.6 sec sun4i-a10-cubieboard FAIL: 0 min 19.2 sec
bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.7 sec
exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.9 sec
multi_v7_defconfig ------------------ qcom-apq8074-dragonboard PASS: 1 min 8.5 sec ste-snowball FAIL: 0 min 33.9 sec tegra30-beaver PASS: 0 min 24.1 sec am335x-boneblack PASS: 0 min 24.2 sec omap3-beagle-xm PASS: 0 min 47.6 sec sun7i-a20-cubieboard2 FAIL: 0 min 31.7 sec armada-370-mirabox PASS: 0 min 22.2 sec omap4-panda PASS: 0 min 52.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.2 sec sun4i-a10-cubieboard FAIL: 0 min 23.6 sec bcm28155-ap PASS: 1 min 4.1 sec omap3-overo-tobi PASS: 0 min 22.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.2 sec am335x-bone PASS: 0 min 26.8 sec omap3-overo-storm-tobi PASS: 0 min 23.9 sec omap5-uevm PASS: 1 min 55.7 sec imx6q-wandboard PASS: 0 min 17.4 sec omap4-panda-es PASS: 0 min 55.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.5 sec
u8500_defconfig --------------- ste-snowball PASS: 0 min 36.7 sec
sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec
davinci_all_defconfig --------------------- legacy,dm365evm FAIL: 0 min 22.6 sec
Console logs for failures =========================
da8xx_omapl_defconfig ---------------------
da850-evm: FAIL: last 80 lines of boot log: -------------------------------------------
SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB Net: DaVinci-EMAC Hit any key to stop autoboot: 3 0 U-Boot > U-Boot > version version
U-Boot 2014.01-dirty (Feb 27 2014 - 15:12:48) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.52.20130913 U-Boot > setenv bootargs console=ttyS2,115200n8 debug earlyprintk setenv bootargs console=ttyS2,115200n8 debug earlyprintk U-Boot > if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot > if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot > setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot > dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.1.194 U-Boot >setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot > if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot > tftp 0xc0800000 192.168.1.2:tmp/da850evm-LjBG4F/zImage tftp 0xc0800000 192.168.1.2:tmp/da850evm-LjBG4F/zImage Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'tmp/da850evm-LjBG4F/zImage'. Load address: 0xc0800000 Loading: *################################################################# ################################################################# ######################## 1.7 MiB/s done Bytes transferred = 2249768 (225428 hex) U-Boot > tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'buildroot.cpio.gz.uboot'. Load address: 0xc0c00000 Loading: *############################################ 1.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot > tftp 0xc07f0000 192.168.1.2:tmp/da850evm-LjBG4F/da850-evm.dtb tftp 0xc07f0000 192.168.1.2:tmp/da850evm-LjBG4F/da850-evm.dtb Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'tmp/da850evm-LjBG4F/da850-evm.dtb'. Load address: 0xc07f0000 Loading: *# 1.1 MiB/s done Bytes transferred = 6935 (1b17 hex) U-Boot > printenv bootargs printenv bootargs bootargs=console=ttyS2,115200n8 debug earlyprintk U-Boot > bootz 0xc0800000 0xc0c00000 0xc07f0000 bootz 0xc0800000 0xc0c00000 0xc07f0000 Kernel image @ 0xc0800000 [ 0x000000 - 0x225428 ] ## Loading init Ramdisk from Legacy Image at c0c00000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.25 seconds. # PYBOOT: Result: FAIL
omap2plus_defconfig -------------------
legacy,3730xm: FAIL: last 80 lines of boot log: -----------------------------------------------
version
U-Boot 2013.04 (Jan 17 2014 - 10:48:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.2 OMAP3 beagleboard.org # setenv usbethaddr 2a:45:34:6d:b4:5d setenv usbethaddr 2a:45:34:6d:b4:5d OMAP3 beagleboard.org # setenv preboot "dcache off; usb start" # For USB net setenv preboot "dcache off; usb start" # For USB net OMAP3 beagleboard.org # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 OMAP3 beagleboard.org # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' OMAP3 beagleboard.org # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi OMAP3 beagleboard.org #if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org #dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.190 OMAP3 beagleboard.org #setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # tftp 0x80200000 192.168.1.2:tmp/3730xm-LeXzEj/zImage tftp 0x80200000 192.168.1.2:tmp/3730xm-LeXzEj/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-LeXzEj/zImage'. Load address: 0x80200000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################# 512.7 KiB/s done Bytes transferred = 4299256 (4199f8 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 108.4 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz 0x80200000 0x81000000 bootz 0x80200000 0x81000000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.45 seconds. # PYBOOT: Result: FAIL
legacy,3530beagle: FAIL: last 80 lines of boot log: ---------------------------------------------------
In: serial Out: serial Err: serial Beagle Rev C1/C2/C3 Timed out in wait_for_event: status=1000 Check if pads/pull-ups of bus 1 are properly configured No EEPROM on expansion board Die ID #5ac400030000000004013f8901001001 Net: usb_ether Hit any key to stop autoboot: 3 0 OMAP3 beagleboard.org # OMAP3 beagleboard.org # version version
U-Boot 2014.01-rc3 (Jan 17 2014 - 09:19:33) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.2 OMAP3 beagleboard.org # setenv preboot usb start # For USB net dongle setenv preboot usb start # For USB net dongle OMAP3 beagleboard.org #setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 OMAP3 beagleboard.org # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' OMAP3 beagleboard.org # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi OMAP3 beagleboard.org # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found OMAP3 beagleboard.org #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2362/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 3 DHCP client bound to address 192.168.1.191 OMAP3 beagleboard.org # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org #tftp 0x80200000 192.168.1.2:tmp/3530beagle-reEtZD/zImage tftp 0x80200000 192.168.1.2:tmp/3530beagle-reEtZD/zImage Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.191 Filename 'tmp/3530beagle-reEtZD/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################# 648.4 KiB/s done Bytes transferred = 4299256 (4199f8 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.191:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz 0x80200000 bootz 0x80200000 Kernel image @ 0x80200000 [ 0x000000 - 0x4199f8 ]
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 41.05 seconds. # PYBOOT: Result: FAIL
legacy,3730storm: FAIL: last 80 lines of boot log: --------------------------------------------------
U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05)
OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz Gumstix Overo board + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 512 MiB MMC: OMAP SD/MMC: 0 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Board revision: 1 Tranceiver detected on mmc2 No EEPROM on expansion board Die ID #3dea00029ff80000016830c40802e016 Net: smc911x-0 Warning: smc911x-0 using MAC address from net device
Hit any key to stop autoboot: 5 0 Overo # Overo # version version
U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 Overo # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 Overo # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' Overo # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.195 Overo # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Overo # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Overo # tftp 0x80200000 192.168.1.2:tmp/3730storm-xz46jf/zImage tftp 0x80200000 192.168.1.2:tmp/3730storm-xz46jf/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-xz46jf/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################# 2.4 MiB/s done Bytes transferred = 4299256 (4199f8 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.195:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo #bootz 0x80200000 bootz 0x80200000
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.59 seconds. # PYBOOT: Result: FAIL
linaro-kernel@lists.linaro.org