queue boot: 32 pass, 1 fail (v3.12.10-33-ge194c2c) - linaro-kernel

8 Feb 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: queue
Git describe: v3.12.10-33-ge194c2c
Failed boot tests (console logs at the end)
===========================================
          armada-370-mirabox:     FAIL:    mvebu_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
            am335x-boneblack     PASS:    0 min 25.5 sec
             omap3-beagle-xm     PASS:    0 min 54.2 sec
                 omap4-panda     PASS:    1 min  7.1 sec
                  omap3-tobi     PASS:    0 min 22.2 sec
                 am335x-bone     PASS:    0 min 26.6 sec
              omap4-panda-es     PASS:    1 min  6.1 sec
multi_lpae_defconfig
--------------------
       sun7i-a20-cubieboard2     PASS:    0 min 13.7 sec
tegra_defconfig
---------------
              tegra30-beaver     PASS:    0 min 16.9 sec
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     PASS:    0 min 18.0 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 17.7 sec
             imx6q-wandboard     PASS:    0 min 16.4 sec
bcm_defconfig
-------------
                 bcm28155-ap     PASS:    0 min 58.7 sec
exynos_defconfig
----------------
          exynos5250-arndale     PASS:    0 min 30.6 sec
multi_v7_defconfig
------------------
                ste-snowball     PASS:    0 min 28.4 sec
              tegra30-beaver     PASS:    0 min 16.9 sec
            am335x-boneblack     PASS:    0 min 32.2 sec
             omap3-beagle-xm     PASS:    0 min 57.1 sec
       sun7i-a20-cubieboard2     PASS:    0 min 13.3 sec
          armada-370-mirabox     PASS:    0 min 20.5 sec
                 omap4-panda     PASS:    1 min  4.9 sec
  armada-xp-openblocks-ax3-4     PASS:    0 min 22.5 sec
        sun4i-a10-cubieboard     PASS:    0 min 16.4 sec
                 bcm28155-ap     PASS:    1 min 14.6 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 17.1 sec
                  omap3-tobi     PASS:    0 min 20.4 sec
                 am335x-bone     PASS:    0 min 34.0 sec
             imx6q-wandboard     PASS:    0 min 16.2 sec
              omap4-panda-es     PASS:    1 min  4.5 sec
  imx6dl-wandboard,wand-dual     PASS:    0 min 17.2 sec
u8500_defconfig
---------------
                ste-snowball     PASS:    0 min 33.8 sec
sama5_defconfig
---------------
                  sama5d35ek     PASS:    0 min 17.3 sec
mvebu_defconfig
---------------
  armada-xp-openblocks-ax3-4     PASS:    0 min 22.0 sec
          armada-370-mirabox     FAIL:    0 min 27.8 sec
Console logs for failures
=========================
mvebu_defconfig
---------------
armada-370-mirabox: FAIL: last 80 lines of boot log:
    ----------------------------------------------------
phy16= 72 
phy16= 72 
MMC:   MRVL_MMC: 0
Net:   egiga0 [PRIME], egiga1
Hit any key to stop autoboot:
  3  0 
Marvell>> 
Marvell>> version
version
U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ
Marvell>> setenv bootargs console=ttyS0,115200 debug earlyprintk
setenv bootargs console=ttyS0,115200 debug earlyprintk
Marvell>> setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
Marvell>>if test -n ${initenv}; then run initenv; fi
 if test -n ${initenv}; then run initenv; fi
Marvell>> if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
Marvell>>setenv autoload no; setenv autoboot no
 setenv autoload no; setenv autoboot no
Marvell>> dhcp
dhcp
phyaddr= 0
BOOTP broadcast 1
DHCP client bound to address 192.168.1.183
Marvell>> setenv serverip 192.168.1.2
setenv serverip 192.168.1.2
Marvell>> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
Marvell>tftp 0x02000000 192.168.1.2:tmp/mirabox-0L74iB/tmpQm6xOS-uImage
...
tftp 0x02000000 192.168.1.2:tmp/mirabox-0L74iB/tmpQm6xOS-uImage
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.183
Filename 'tmp/mirabox-0L74iB/tmpQm6xOS-uImage'.
Load address: 0x2000000
Loading: *#################################################################
     #################################################################
     ###################################################
done
Bytes transferred = 2653453 (287d0d hex)
Marvell>> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.183
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x3000000
Loading: *############################################
done
Bytes transferred = 642602 (9ce2a hex)
Marvell>> printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk
Marvell>>bootm 0x02000000 0x03000000 
 bootm 0x02000000 0x03000000 
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux
   Created:      2014-02-08   1:21:05 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2653389 Bytes =  2.5 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2014-02-07  19:37:29 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    642538 Bytes = 627.5 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 27.81 seconds.
# PYBOOT: Result: FAIL